Used Danfoss Solenoid for sale (536)

Condition: new, loading space length: 5,300 mm, loading space width: 2,420 mm, total length: 6,500 mm, Year of construction: 2026, Brand new roll-off container with FASSI loading crane Roll-off container in a platform design with aluminum sideboards and a permanently mounted Fassi loading crane ELLERMANN roll-off container according to DIN 30722-1 with aluminum sideboards and crane platform Platform tipper body type K 33 s Internal dimensions: approx. 6.5/5.3 x 2.42 x 1.0 meters, all dimensions are approximate Useful volume: approx. 13 m³ Paint finish: in RAL color according to customer's request ? Mounting brackets for hook lift systems according to DIN 30722-1 (15,000 kg) with rear outside rollers and subframe made of INP 180 Outside rollers are greaseable and replaceable Mounting bracket Ø 50 mm, hook height 1,570 mm Transition from the subframe to the end wall support reinforced with 10 mm gusset plates ? Crane platform 20 mm thick at the end, length approx. 1,200 mm Reinforcement on the end wall support and subframe inside Additional stiffening on the end support ? End wall inner height approx. 1,000 mm ? Floor made of 5 mm St 37.2 (S235JR) ? Floor spar spacing 500 mm Spar profile U 80 x 50 mm ? Outer profile as a hole strip (a hole Ø 40 mm every 200 mm), Loadable with 500 kg / hole, max 5 tons per side, operable from the inside ? Aluminum sideboards, approx. 1.0 meter high, foldable and removable, 1 x divided in the middle by a removable center post ? Aluminum rear flap, foldable and removable (cannot be driven over) with removable corner posts ? All-around tarpaulin and net hooks ? Container double primed inside and out and double painted in a single color inside and out ? Aluminum sideboards unpainted ? UVV stickers with safety instructions ? Container tested and approved according to DGUV rule 214-017 (formerly BGR 186) ? Container test book (digitized) for documentation of the required annual recurring inspection according to UVV FASSI loading crane F150A.2 e-dynamic Design according to CE directive (EN 12999) The equipment manufacturer must carry out the inspection once the loading crane has been mounted in its final position and is ready for operation. Base unit: F150A.2 e-dynamic Slewing range 416° All hydraulic cylinders are double-acting Piston rods are hard chrome-plated Double lever system with PROLINK (overextension of the knuckle arm up to 15°) Electronic overload protection device with FX500 6 functions RCH or RCS radio remote control (linear levers) with Display and XP system Emergency stop, as well as optical alarm (90% and 100%) Including digitally adjustable slewing limit FASSI stability control FSC including LMB II Pressure relief and load holding valves, high-pressure filter Danfoss S800 control block with 4 control valves, operable from one side Separate hydraulic tank (90 l) with filter, mounted on the crane base Extendable on both sides, support width 4.60 m, hydraulic support - CE, including M.O.L. Standard color RAL 3020 traffic red - all cylinders painted black Load hook and attachment bridges (short / 500 mm) Driving position: folded transversely to the direction of travel Dead point above the support beam Caution: Note the on-board voltage / 12 V or 24 V, standard 24 V F150A.2.23 e-dynamic » Base unit IE742 connection box Support spread to support width 5.4 m Move dead point 1 LED work light on the knuckle arm » mounted LED for 2 outriggers, not mounted » (crane) Codpfxozq Iu Ij Apbehc Control system for 2 additional functions with » 2 hose guides / eactive Slewing valve, only for cranes with rack and pinion Quick-release valve for the extensions E

Condition: used, Used pneumatic valve manifold from Festo with six solenoid valves from the VSVA series. Manufacturer: Festo Device type: Valve manifold Valve type: VSVA-B-P53E-ZD-A2-1T1L Number of valves: 6 Operating type: Solenoid valves Nominal voltage: 24 V DC Pressure range: 3 to 10 bar Pressure range: 45 to 145 psi Connection type: Pneumatic plug-in connectors Application area: Pneumatics and automation technology Cedpfx Apozlt E Isbehc Condition: Used

Condition: good (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: GSL German Standard Lift, directional control valve -Type: 4070150000 EL -Pmax: bar Cedpfsy Atv Rox Apbjhc -Number: 3x valve available -Price: per piece -Dimensions: 236/46/H70 mm -Weight: 2.2 kg/pc.

Condition: excellent (used), Solenoid coil, stop solenoid, pull solenoid, ejector solenoid, stop solenoid, locking unit, solenoid valve coil -Manufacturer: Parker, solenoid valve coil, solenoid coil unused -Type: AK-D1VW-C-SW-75-X610 AK-D1VWCSW75-X610 -Voltage: 48 VDC -Number: 295x magnetic coils available Csdpfx Ajlcfh Nepbohc -Price: per piece -Dimensions: 68/45/H54 mm -Weight: 0.4 kg

Condition: used, Solenoid coil, stop magnet, pull magnet, opening magnet, stop magnet, locking unit, solenoid valve coil -Manufacturer: Parker, solenoid valve coil Solenoid coil unused -Type: AK-D3W-S-SW-30-610 MSM-H1 -Voltage: 48VDC -Number: 5x magnetic coil available Chjdpslcfimsfx Apbsc -Price per piece -Dimension: 90/62/H72 mm -Weight: 1.0 kg

Condition: used, 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve -Manufacturer: Festo, solenoid valve -Type: CPE14-M1BH-5J-1/8 -PN: 2 - 8 bar -Dimension: 135/15/H40 mm -Weight: 0.1 kg Chsdpeii Sfijfx Apbjc

Condition: used, 4/3-way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Kramer Grebe control block from vacuum packaging system Tiromat 3000/430 -Pressure switch: Herion 0 880 100 -Valves: PMV-D 25/32 BL / PMV-D 40/40 BL -Individual components: see photos -Total dimensions: 440/380/H230 mm Codpfx Apjhvfzrjbjhc -Weight: 11.3kg

Condition: used, Valve islands, multi-pin plug connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve Cjdpfx Asd S Ap Sjpbehc -Type: CPV-14-VI 18210 CPV14-GE-MP-6 -Dimensions: 165/95/H110 mm -Weight: 1.5 kg

Condition: used, Directional control valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block -comes from a Krauss Maffei 1000 t injection molding machine -Machine type: KM 1000/5000A -Valve manufacturer: Bosch -Type: 081WV10P1N126WS024/00AO -Type: -Max. Pressure: 315 bar -Tension -Dimensions: 850/600/H550 mm Codpsb R Ac Isfx Apbohc -Weight: 634 kg

Condition: good (used), 4/2 way valve, solenoid valve, hydraulic valve, air valve, pressure valve, valve block, control block -Manufacturer: Pister -Type: 0/1013 12V -Type: 6/90 Chedpfx Aecdcn Iopbec -Number: 22x valves available -Price: per piece -Dimensions: 160/95/H50 mm -Weight: 2.3 kg

Year of construction: 2006, condition: used, Butterfly valve, flap valve, solenoid valve, solenoid valve Cedpfx Ajgg Tggopbehc -Manufacturer: Asco, two-way solenoid valve -Type: SCG262C022 -Connection: 1/4 " -Number: 1x valve available -Dimensions: 70/40/H60 mm -Weight: 0.4 kg

Condition: good (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block Chsdpfx Apob A R Svsbsc -Type: Price: per piece Quantity: 5 available -Weight: 0.4 kg

Condition: good (used), Proportional pressure control directional valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block Cjdpfx Apjb A Sf Esbjhc -Operating pressure: 8 bar 120 psi -Dimensions: 200/85/H75 mm -Weight: 2 kg

Condition: good (used), 3/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: Chsdpfx Apeb A Sihobsc Price: per piece Quantity: 5 available -Weight: 0.4 kg

Condition: good (used), Proportional pressure control directional control valves, solenoid valves, pneumatic valves, air valves, pressure valves, valve blocks, control blocks -Operating pressure: 8 bar 120 psi -Dimensions: 200/85/H75 mm Price: per piece -Quantity: 2 available Chsdpfeb A Simex Apbec -Weight: 2 kg/piece

Condition: good (used), 5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block Cedpeb A Skxefx Apbohc -Type: Number: 1x valve available -Price: per piece -Weight: 0.7 kg

Condition: used, Proportional pressure regulating directional valves, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Operating pressure: 0-6 bar -Number: 2x valves available -Price: per piece -Dimensions: 110/45/H55 mm Chedpfxob Nfc Ro Apbec -Weight: 0.4 kg

Condition: good (used), 4/3-way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Bosch / Rexroth, control block from rotary transfer machine Uldrian TSM 22-8 Chodpfx Aem Rk S Dspbsc -Valves: Bosch 0 0 -Rexroth: 4WE 6 D7X/HG24N9K4 -Individual components: see photos -Total dimensions: 390/350/160 mm -Weight: 30 kg

Condition: new, Schmersal MZM 100 ST2-SD2PREM-A solenoid interlock,unused in opened original packaging, 100% functional, scope of delivery according to photos Cjdpfxjpnpnto Apbehc

Condition: good (used), Valve islands, multi-pin connection, directional valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: Festo, valve island CPV14 -Type: CPV14-GE-DI01-8 CPV14-VI -Valves: Festo 161 361 8 pieces -Individual components: see photos Chedpfx Aep Hix Sjpbec -Dimensions: 250/150/H100 mm -Weight: 2.6 kg

Condition: new, Honeywell Gas Solenoid Valve Chjdpfx Apjzbr I Ujbsc

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.520 - EURO 6 with F805 including L436 fly-jib and V20 winch!!! Tipmatik - Automatic transmission Codpfx Asyxa Dtopbohc 8x4 Three steered axles STEERING / LIFT axle Front outriggers approx. 14,000 KG Flatbed body with sideboards 6200x2550x600 mm Steps Diamond plate floor Removable sideboards 9 x LED lights Extendable overwidth markings to 3500 mm width Start/Stop Rotating beacon 8 x Rail pockets 6 x Lashing eyes 6500daN Toolboxes Trailer hitch Storage compartments Storage boxes 20-foot container locking mechanism Perforated side profile with lashing eyes 2500daN Crane: FASSI 705 R.2.7, F805R.2.7, F905R.2.7 with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, fly-jib L436 with 6 hydraulic extensions, rope winch, cross-function remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, pivoting sheave, quick coupling between main boom and fly-jib and more... TECHNO SERIES !! NEW CRANE MODEL Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chrome plated Double knuckle system with PROLINK (overextending knuckle arm up to 10°) Electronic overload cut-off device with FX800 FASSI stability control FSC-S/2 including LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-assembled with piping separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base hydraulic outriggers, on both sides hydraulically extendable, outrigger span 10.00m, outriggers operable via radio Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Transport position: folded transversely to the direction of travel Attention: Observe operating voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control block » for the outriggers 180° hydraulically swiveling support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 auxiliary functions with » 2 hose guides / hxp-techno Auxiliary boom (Jib) L436, 6-way » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable entry » for jib mounted for 2 functions Control system for auxiliary function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide for operation with auxiliary boom (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the jib » LED for 2 outriggers, not mounted » (crane) LED for 2 outriggers, not mounted » (auxiliary support beam) Electric rotary distributor with 14 » slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Surcharge for Dinitrol application (cavities) Surchar

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.520 - EURO 6 with F805 including L436 fly-jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Three steered axles STEERING / LIFT axle Front outriggers approx. 14,000 KG Flatbed body with sideboards 6200x2550x600 mm Steps Diamond plate floor Removable sideboards 9 x LED lights Extendable overwidth markings to 3500 mm width Start/Stop Rotating beacon 8 x Rail pockets 6 x Lashing eyes 6500daN Toolboxes Trailer hitch Storage compartments Storage boxes 20-foot container locking mechanism Perforated side profile with lashing eyes 2500daN Crane: FASSI 705 R.2.7, F805R.2.7, F905R.2.7 with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, fly-jib L436 with 6 hydraulic extensions, rope winch, cross-function remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, pivoting sheave, quick coupling between main boom and fly-jib and more... TECHNO SERIES !! NEW CRANE MODEL Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chrome plated Double knuckle system with PROLINK (overextending knuckle arm up to 10°) Electronic overload cut-off device with FX800 FASSI stability control FSC-S/2 including LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-assembled with piping separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base hydraulic outriggers, on both sides hydraulically extendable, outrigger span 10.00m, outriggers operable via radio Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Transport position: folded transversely to the direction of travel Attention: Observe operating voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control block » for the outriggers 180° hydraulically swiveling support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 auxiliary functions with » 2 hose guides / hxp-techno Auxiliary boom (Jib) L436, 6-way » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable entry » for jib mounted for 2 functions Control system for auxiliary function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide for operation with auxiliary boom (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the jib » LED for 2 outriggers, not mounted » (crane) LED for 2 outriggers, not mounted » (auxiliary support beam) Electric rotary distributor with 14 » slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Surcharge for Dinitrol application (cavities) Surchar Chjdpfx Ajzp Sz Aopbec

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loader Crane Vehicle Description for: TGS 35.520 8x2H-6 BL CH Removable flatbed, Jost fifth wheel coupling, fully clad V2A Trade tonnage: 35 t 2,980 mm main wheelbase 1,795 mm wheelbase between front axles 1,350 mm wheelbase between rear axle and trailing axle Side-mounted exhaust silencer, right side Chedezmkxhopfx Apbsc Ground outlet exhaust 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical requirements 390 l fuel tank capacity, left side 35 l AdBlue tank capacity, right side Air compressor, 1 cylinder, 360 cc, with economy system Pneumatically controlled air supply system Air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency braking assistant Disc brakes on front axle Disc brakes on second front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard warning activation LED side marker lights MAN D2676 LFAX diesel engine, 382 kW (520 hp) power, 2,650 Nm torque, Euro 6e Heated fuel filter, suitable for fuels up to cleanliness class 25 Pre-fuel filter with oil/water separator, with water sensor, heated (mixing valve) F1150RA.2.28 L616 Winch + 2-man basket (available on request at extra cost) Endless slewing range All hydraulic cylinders are double-acting Piston rods hard-chromed Double knuckle joint system with PROLINK (over-stretchable knuckle boom up to 12°) Electronic overload shutdown with FX900 FASSI stability control FSC incl. LMB II Emergency stop and visual alarm (90% and 100%) Pressure-limiting and load-holding valves XF system (Extra Fast) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on display Danfoss D900 valve block with 4 control valves mounted on the crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, extendable both sides hydraulically, support width 8.84m Outrigger control via radio with proportional valve block IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red – all cylinders painted black Load hook and mounting brackets (short/500mm) Transport position: folded crosswise to direction of travel Note: Observe board voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II 1 IE742 terminal box Low-profile subframe 180° hydraulically tiltable outrigger legs, both sides Control system for additional function (winch/xhe-dynamic) Control system for 2 additional functions with 2 hose guidance systems / xhe-dynamic Preparation for variable displacement pump (LS) Work light operable via display (1 b/w function) 1 LED work light mounted on knuckle boom LED for 2 outrigger legs, not mounted (crane) LED for 2 outrigger legs, not mounted (additional outrigger supports) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS V7 RCS radio remote control Fassi radio remote control V7S: Available with 6 or 8 functions with linear levers or joysticks. V7S with 4.3" color display / 24bit - 480 x 272 px, with 8 push buttons Engine start/stop, RPM +/-, 6 x ON/OFF functions, 10m cable and various operating speed controls, incl. second battery, charger, neck and waist belt

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: P-30010522, Technical characteristics: Work Area - Maximum clamping plate diameter: 260 mm - Maximum turning diameter: 260 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 110 mm - X-axis travel: 570 mm / Rapid traverse X: 60 m/min - Z-axis travel: 200 mm / Rapid traverse Z: 30 m/min - Standard closed automation (number of loading nests by workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle according to DIN 55026, Size 6 !!! Brand new, replaced in 2024 !!! - Maximum speed: 4,500 rpm - Power, 100% / 40% duty cycle: 18 / 27 kW - Torque, 100% / 40% duty cycle: 202 / 303 Nm Tool Turret with Driven Tools - Tool holders with cylindrical shank to DIN 69880: 12 - VDI40 - Number of turret stations: 12 - Maximum tool length (including holder): 190 mm - Maximum speed: 6,000 rpm - Maximum torque: 37 Nm (10% duty cycle), 26 Nm (25% duty cycle), 14 Nm (100% duty cycle) Electrical Equipment - Operating voltage: 400 – 480 V - Connected load: 42 kW Dimensions - Overall dimensions: Length = 2,680 mm (3,820 mm with chip conveyor), Width = 2,040 mm, Height = 2,400 mm - Weight: 6,500 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - CNC control: GE Fanuc Series 18i TB Cjdpfx Aoxxkh Topbehc - High precision: Positioning accuracy in X and Z axes ±0.001 mm (Heidenhain linear scales) - Main spindle: High power and broad speed range - Automated loading/unloading: Integrated automation system for part feeding and removal - Driven tools: Capability for drilling and milling operations - Chip conveyor - Documentation: Electronic unavailable, partial hard copy/manual available Machine status: NOT WORKING - Hydraulic solenoid valves: 4 units - Coolant (emulsion) pump defective