Used Deckel Fp 1 - # 2 for sale (107,805)

Condition: reconditioned (used), Year of construction: 1989, Dear Sir or Madam, For sale is a partially overhauled Deckel FP1 milling machine equipped with a 3-axis Heidenhain TNC113 active control, notable for its ease of operation. This modern version, built in 1989, features central lubrication, an electric coolant pump, and a machine lamp, among other benefits. The machine has undergone extensive partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on-site at any time. Delivery time: on request Machine no.: 2102-xxxx Table: Rigid angled table or rotary-tilt-swivel table Travel (X/Y/Z): X 300 mm / Y 160 mm / Z 340 mm Quill travel: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool taper: SK40 Feed: Infinitely variable 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: 3-axis Heidenhain TNC113 digital readout with active control, infinitely variable feed regulation on all 3 axes, coolant unit, central lubrication, technical documentation, leveling feet, safety equipment (optional) Our service promise to you: - We are a certified master workshop specializing in mechanical engineering Gusdpfopy Eldsx Aqiof - All machines undergo thorough inspection - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your selected machine - If required, you can order additional accessories such as tools, etc., directly - We can also install further equipment such as safety devices upon request - We are happy to handle shipping and/or installation

Condition: used, Year of construction: 1981, weight of the machine ca. 1.700 kg Gedpfxeyv Nito Aqiouf dimensions 2000 x 1000 x 1950 mm

Condition: good (used), For sale is a Deckel FP2 with high-speed milling head (V-belt drive with gear ratio) The machine was only used for copper & graphite processing, so it is not subjected to heavy use The machine is ready for use and fully functional A digital display can be retrofitted for an additional charge. The machine can also be sold without a milling head. Partial device NOT included Accessories available for an additional charge Tool holder: SK 40 Travel paths X/Y/Z: 400 / 200 / 400 mm Speed range: 40 - 2000 rpm Vertical spindle travel: 60 mm Horizontal spindle travel: 100 mm Feed rates: 8 - 400 mm/rev Table size: 700 x 330 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg All prices plus VAT Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Gedpfjlz R Iwox Aqieuf For more information or contact options, visit us on our website

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 2836-0192, Machine in good used condition, Dialog 11 control. Until recently, it was only rarely in operation in our own workshop. Documentation/manuals etc. are available. Additional accessories, cutters, zero point probes, etc. can be purchased optionally. Gujdpfx Aqeylawxeijf

Condition: ready for operation (used), Grundig CNC 36 / 44216-007.00 monitor for Deckel Maho FP4-60, used, in good condition, 100% functional, scope of delivery as per photos. Guodpfsy Nqayjx Aqijf

Condition: ready for operation (used), Grundig Dialog 12 Deckel Maho control panel / keyboard for FP4-60, used, in good condition, 100% fully functional, scope of delivery as shown in photos Guedpfsy Nqa Hsx Aqisf

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 2 rpm, table length: 900 mm, table width: 530 mm, type of input current: three-phase, total length: 900 mm, total width: 530 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 2 rpm, warranty duration: 3 months, working range: 900 mm, Equipment: documentation/manual, rotational speed infinitely variable, We are offering this overhauled Deckel FP 4-60T tool milling machine with Dialog 11 control, year of manufacture 1992. Gsdpfxox Sv Ubj Aqijuf Deckel: FP 4-60T Condition: Fully overhauled Tool changer: 24 positions Control: Dialog 11 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1989, Technical details: x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm control: Contour 3 Bahnsteuerung spindle taper ISO: SK 40 spindle head swivable left - right: 90 ° Gjdpfx Aqju Nc Twjiouf quill travel: 60 mm range of revolution per miute: 40 - 4000 / 21 step U/min feed:: 2 - 3600 mm/min rapid traverse : 4000 mm/min Table dimensions: 620 x 390 mm clamping table: Winkeltisch mm table load: 0,45 t total power requirement: 12,5 kVA machine weight approx.: 1400 kg dimension machine xH: 1,5 x 2,1 x 2,0 m dimensions electric cabinet: 1,8 x 0,8 x 1,1 m Operation via control panel Grundig electronic with extension arm equipment: - cooling with pump - manual-control unit with steering wheel - machine illumination Machine can be demonstrated under power. *

Condition: used, machine/vehicle number: 0736, x-travel:800 mm y-travel:300 mm z-travel:400 mm work table::1000 X 440 spindle turning speed range:40 - 2000 RPM/min turning speeds steps:18 feed range:10-500 mm/min feed steps:18 rapid traverse:1,50 m/min inner taper of milling spindel:SK40 total power requirement:2,2 kW weight of the machine ca.:2 t dimensions of the machine ca.:1,57 x 1,68 x 1,85 m Guodpfx Aocxxyhjqisf Deckel FP2 LB Universal Milling Machine - Spilndle Head can be swiveled left or right (90°) - Rigid Angular Table: 1000 x 440 mm - Quick lever for Rapid Feed Travese Seperate Power cabin and has a Chip tray for clean safe working Area.

Year of construction: 1994, condition: excellent (used), Deckel milling machine FP 2A with Dialog 12 control system + vise. Guodpfofgmbdox Aqisf

Year of construction: 1981, condition: used, Manufacturer: Deckel Type: FP 4 Table: Dimensions: 1000 x 470 mm Longitudinal movement (X-axis): 700 mm Transverse movement (Y-axis): 400 mm Vertical movement (Z-axis): 450 mm Spindle overhang: 50 - 450 mm Spindle mount: ISO 40 Number of spindle speeds: 18 Gjdpfx Aqoihp U Deijuf Spindle speed range: 31.5 - 1600 rpm Number of horizontal spindle speeds: 18 Horizontal spindle speed range: 31.5 - 1600 rpm Machine weight: 2000 kg Feeds (X, Y, Z axes): 18, 10 - 500 mm/min Accessories: Milling head with quill Table: 1000 x 470 mm

Condition: ready for operation (used), DECKEL FP 2E tool milling machine from educational institution - Travel ranges X / Y / Z 400x200x400mm - Automatic feeds & rapid traverse in X/Z axes - Spindle speed range 40 - 2000 rpm - Tool holder ISO 40 - Vertical / horizontal milling configuration - Swivelling vertical head with quill feed - Machine with sliding head / extendable Y travel - New control cabinet - Coolant system Guodpjypltaefx Aqief - Chip tray - Documentation Dimensions: LxWxH 1.5x1.6x1.8 meters / Weight 1500 kg Errors and omissions excepted.

Condition: used, maximum load weight: 31,475 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2021, Year of construction: 2021, 1st axle liftable, dimensions (LxWxH): 13,625 mm x 2,480 mm x 2,700 mm, Rotos SCB 9t, Jost support leg, LED side marker lights linked with indicators, Delta rear cross underrun bar, 13 pairs of lashing rings on the outer frame (2,000 kg per ring), EN 12640, 2x load securing rails at 800 mm and 1,500 mm, hot-dip galvanized chassis, RAL 9010 Gusdpfx Ajyu Euzjqijf

Condition: ready for operation (used), Siemens 1FT5066-0AC01-2 - Z permanent magnet motor SN E0T98376301014 without cover Z = holding brake installed + prepared for encoder system, used, minor signs of wear, 100% functional, scope of delivery as per photos Gsdpfx Ajmbr Naeqisuf

Condition: ready for operation (used), Siemens 1FT5066-0AC01-2-Z permanent magnet motor with brake and encoder system - without cover SN: E0T98376301002, used, normal signs of use, 100% functional, scope of delivery as per photos, Z see type plate Gusdpfxsmbr Nho Aqijf

Condition: ready for operation (used), Siemens 1FT5072-0AC01-2-Z permanent magnet motor without cover Z = G51 / H40 SN: E0T98376302003, used, minor signs of wear, 100% functional, scope of delivery as per photos Guodpembr Ntefx Aqiof

Year of construction: 2023, condition: good (used), Edge banding, edge banding, veneer roll -Manufacturer: Rehau, edge band Raukantex 3 rolls -Type: Raukantex FP 28/1 97556 -Color: gray -Dimensions: 28 x 1 mm -Carton: Contents 3 rolls x 100 m -Quantity: 1 boxes available -Price: per carton -Carton dimensions: 490/490/H100 mm Gjdpfxst Uwxws Aqieuf -Weight: 9.2 kg/carton

Condition: ready for operation (used), Year of construction: 2003, pressing force: 138 t, number of axes: 6, This 6-axis GASPARINI PBS 1 125/4000 FP was manufactured in 2003. It features a bending width of 4000 mm and a press force of 135 tons. With 4 back gauge axes (x, r, z1, and z2), this machine offers enhanced precision for your bending applications. If you are looking to get high-quality bending capabilities, consider the GASPARINI PBS 1 125/4000 FP press brake we have for sale. Contact us for further details. Gujdpjzauftjfx Aqiof • Backgauge: 4 axes (X, R, Z1, Z2) • Press force: 135 t • Bending width: 4000 mm Technical Specification Bending Length 4000 mm

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, A complete cooling water unit that was used for cooling screw compressors. Pump unit with machine frame, consisting of: - 3 x Grundfos CRNE45-2-2 A-F-G-V-HQQV centrifugal pumps (Year of manufacture: 2012) Q = 45 m³/h, H = 30.6 m, P2 = 5.5 kW Guodpfx Aeywuihjqiof - 6 x manual stainless steel shut-off butterfly valves DN 80 - 3 x basket strainers DN 80 - 3 x check valves DN 80 - 1 x pressure relief valve - 2 x Rosemount GP6 S22 C1 pressure transmitters - 6 x stainless steel gauges Cl. 1 - 1 x GRP pipe - 1 x mounting frame Dimensions: Length: 2400 mm Width: 2000 mm Height: 1400 mm Weight: 780 kg Heat exchanger unit with frame, consisting of: - 2 x bolted plate heat exchangers, Funke Apparatebau GmbH (Year of manufacture: 2001) Type: FPS 21-100-1-E Volume: 29.2 / 29.8 liters Max. operating pressure: 10 bar Max. temperature: 80°C - 8 x manual intermediate flange shut-off butterfly valves, stainless steel - 1 x KSB BOA electric valve with Auma SAR actuator and MATIC head, including Harting connector - 2 x PT 100 sensors - 6 x analog thermometers, stainless steel Cl. 1 - 2 x PE pipework with bends 110x65mm Gerodur - 1 x expansion vessel - 1 x mounting frame Dimensions: Length: 2200 mm Width: 2000 mm Height: 2000 mm Weight: 1500 kg

Condition: used, power capacity / kW Gedpfsy S Eb Rjx Aqiouf volt / V ampere / A DECKEL MONITOR Bildschirm DIALOG FP2 / FP3

Condition: used, Year of construction: 1997, operating hours: 32,000 h, total height: 2,700 mm, total length: 5,500 mm, total width: 2,500 mm, Colour: White Empty weight: 13.000 kg - Year: 1997 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 120245 - Operating hours: 32000 - Drive system: CNC - Horizontal/vertical: Horizontal and vertical - Control system brand: Heidenhain - Number of axes [pcs]: 5 - X-axis travel [mm]: 1200 - Y-axis travel [mm]: 880 - Z-axis travel [mm]: 800 - C-axis rotation [°]: 360 - Table length [mm]: 1250 Gsdpfxjy Uv U Hj Aqisuf - Table width [mm]: 1000 - Tool holder: SK40 - Max. spindle speed [rpm]: 18000 - Options: Digital readout, Tool magazine - └ Type of digital readout: Heidenhain - └ Tool magazine [pcs.]: 30 - Transport dimensions: 5500mm x 2500mm x 2700mm (l x w x h) - Transport weight [kg]: 13000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Guodpfowid Spex Aqiof Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: good (used), Deckel FP1 milling machine, made in Germany by Friedrich Deckel AG, Munich. The machine is operational and in working condition. For more information, please contact us. Gedpfjw Amaiex Aqieuf

Condition: good (used), functionality: fully functional, DECKEL FP1 Active milling machine Manufacturer: Deckel Type: FP1 Active Condition: very good Control type conventional Control active HEIDENHAIN TNC X-path 300 mm Y-path 160 mm Z-path 340 mm Tool holder SK40 Gsdpfx Aqoztynfeieuf Speed 40-2000 rpm. Control Active HEIDENHAIN TNC Total power requirement 2 kW Machine weight approx. 0.73 t Space requirement approx. TBH 1200x1100x1600 mm

Condition: used, x-travel 300 mm y-travel 300 mm z-travel 400 mm Control Dialog 11 turning speed range - main spindle 40 - 4000 min/-1 tool taper SK 40 swivellable +/- 90 ° quill stroke 80 mm In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Accessories: - Cabin Gedjzq Hlfspfx Aqiouf Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as prior sale reserved!