Used Dissolver Drais Rn-Pi Ex for sale (8,499)

Condition: used, first registration: 01/2002, color: silver, Year of construction: 2002, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: tail-lift, Vehicle location: Bovenden, aluminium tail lift, upright Body: 2t tail lift BÄR BC2000S4 ex-Bundeswehr! Tedpfx Anomn Sdfjlsb Dimensions: approx. 1,760 mm x 2,500 mm ACCESSORY INFORMATION WITHOUT WARRANTY, SUBJECT TO CHANGES, INTERIM SALE AND ERRORS RESERVATION!

Condition: used, mileage: 1,001 km, first registration: 01/2002, color: red, driver cabin: other, gearing type: other, Year of construction: 2002, Equipment: cable winch, central locking, crane, Vehicle location: Bovenden, crane located behind the building, emergency stop, foldable, 2-point hydraulic support, wireless remote control, 5x hydraulic outriggers, winch. Superstructure: Fassi F230AXP.25 with winch & wireless remote control, formerly used by the Swiss Army! Hardly used! Tedolp Rpfopfx Anlob Load chart: 2m-9100kg, 4.55m-4175kg, 6.35m-2830kg, 8.25m-2060kg, 10.30m-1570kg, 12.35m-1210kg, 14.35m-1000kg. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, mileage: 97,500 km, power: 58 kW (78.86 HP), first registration: 11/1989, fuel type: diesel, empty load weight: 2,660 kg, maximum load weight: 1,940 kg, overall weight: 4,600 kg, tire size: 185R14C, axle configuration: 4x2, brakes: engine braking, color: blue, driver cabin: other, gearing type: mechanical, emission class: none, suspension: steel, number of seats: 6, loading space length: 3,000 mm, loading space width: 2,250 mm, loading space height: 1,400 mm, Equipment: ABS, cabin, parking heater, trailer coupling, Vehicle location: Bovenden, Doka, double bench seat, auxiliary heating, switch 6, leaf suspension, tarpaulin and bows, towing device, tarpaulin, lashing eyes, U-protection, pendulum flaps Body: Platform body with tarpaulin frame Ex-THW, auxiliary hot water heater! The sale to tradesmen or export is subject to 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Tedpfxjvhia Do Anleb

Condition: used, mileage: 44,035 km, power: 48 kW (65.26 HP), first registration: 12/1977, fuel type: diesel, empty load weight: 2,600 kg, maximum load weight: 2,000 kg, overall weight: 4,600 kg, tire size: 6.00R16C, axle configuration: 4x2, wheelbase: 3,500 mm, color: blue, driver cabin: other, gearing type: mechanical, emission class: none, suspension: steel, loading space length: 3,050 mm, loading space width: 2,000 mm, loading space height: 1,700 mm, Equipment: additional headlights, cabin, trailer coupling, Vehicle location: Bovenden, Doka, double bench seat, switch 4, storage box, leaf suspension, tarpaulin and bows, air+light trailer hitch, lashing eyes, U-protection, pendulum flaps Wheelbase: 3500 mm Body: Platform body with tarpaulin Spare wheel available at extra cost! The sale to tradesmen or export is subject to 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Tsdpfevhi Tdjx Anlsb - .

Condition: used, Ex-Linear light fitting with metal housing for surface mountingMake: EATONTyp:AB 12240 E36 pieces availableNew Items Tsdpsd N Sv Nofx Anleb

Year of construction: 2026, condition: new, Suitable for dressing and profiling diamond and CBN grinding wheels. Tsdpjd R Naasfx Anlob Accessories: Total enclosure, Rush camera system with high-resolution B / W camera (15x, 30x, 60x zoom), autom. Zoom control, video overlay (CAD drawing on live image) with 22 "LCD monitor and Ruvision software, On-board PC with Windows and 17 "monitor, Glass scale on the linear axes X and Z, 2 machine lights 12 V, Cooling system 30 Liter tank, Automatic delivery and tilting via servomotors, control panel with touch, Automatically starting position at the end of the work process, Central lubrication, Mist extractor. Specifications: Grinding wheel holder HSK 50 E, diamond grinding wheel diameter 50 - 250 mm, max. grinding wheel width 70 mm, grinding wheel bore diameter 20 mm, speed of the diamond / CBN wheel spindle stepless adjustable 100 - 1000 rpm, connected load of the motor of the grinding wheel 1,75 kW, grinding wheel transverse stroke 160 mm, grinding wheel longitudinal stroke 120 mm, radius of the grinding wheel 0 - 60 mm, dressing wheel 175 x 12 x 32mm, turning speed of the dressing wheel 200 - 2000 rpm. (stepless adjustable) ,, Oscillating speed of the dressing wheel 3400 mm / min (stepless adjustable), oscillating stroke of the dressing wheel 0-50 / min (stepless adjustable), connected load of the motor of the dressing wheel 0.75 kW (400 V / 50 Hz), Weight approx 1520 kg, dimensions 1340 x 1300 x 1900 mm, colour grey / red.

Condition: used, Type: PI 21 Number of needles: 21 Needle diameter: 4 mm Max product: width 250 mm Tact per minute: 15 to 55 tact/min. Passage mechanism type: gear rack rail Product passage height: 220 mm Tsdoh Dm Spepfx Anleb Brine pressure: 0,5 to 4,0 bar Electric power: 1.5 kW Machine dimension in cm: Width: 70 Lenght: 140 Height: 176 Delivery time: 30 working days after advanced payment

Condition: used, mileage: 1,001 km, first registration: 01/2000, empty load weight: 2,790 kg, maximum load weight: 13,210 kg, overall weight: 16,000 kg, color: white, driver cabin: other, gearing type: other, loading space length: 7,250 mm, loading space width: 2,420 mm, loading space height: 2,350 mm, Year of construction: 2000, Vehicle location: Bovenden, rolling gate Body: Swap body with roller shutter, 2x PRESENT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Todpfeua H Evox Anleb - .

Condition: used, Injector Manufacturer: Gunther Model: PI 52 Number of needles: 52 Tjdpfxeui Iylo Anljb Needle diameter: 4 mm Tact per minute: 15 to 55 tact/min. Product passage height: 220 mm

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: PL031303405S, For sale is a single unit consisting of a textile carousel with a matching conveyor dryer: M&R Sportsman EX 8/6 textile carousel, built in 2013 Total print count: 1,168,378 Diameter: 386 cm Weight: 1,497 kg Power supply: 380 V Pallets: Textile - 40 x 55 cm, 8 pieces Pockets - 30 x 40 cm, 8 pieces Sleeves - 15/12 x 40 cm, 8 pieces Squeegees: 6 x flood and 6 x pressure squeegees Screen fit with TRI-LOC Tedpfx Anev Iy H Ioleb M&R Radicure D 36/6-3 conveyor dryer, built in 2012 Conveyor width: 91 cm Drying channel length: 183 cm Total width: 127 cm Total length: 305cm Weight: 817kg Power supply: 380V Price negotiable

Condition: used, mileage: 22,450 km, power: 100 kW (135.96 HP), first registration: 05/1994, fuel type: diesel, overall weight: 7,490 kg, color: red, gearing type: mechanical, number of seats: 9, Mercedes 814 D LF 8/6 Todpfxszig Nns Anlob 5-speed manual transmission, differential lock, 9 seats, double cab with doors Water pump + water tank

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 260 mm, travel distance Y-axis: 115 mm, overall weight: 6,850 kg, controller manufacturer: OKUMA, controller model: OSP-P300LA, number of axes: 5, This 3-axis Okuma LB 3000 EX II was manufactured in 2022, featuring a robust horizontal turning capability. It includes an Iemca KID 80 bar feeder, a 250 mm SMW chuck, and a 170 mm Kitagawa chuck. With a main spindle motor power of 22 kW and rotational speeds up to 6000 rpm, it ensures efficient turning operations. If you are looking to get high-quality turning capabilities consider the Okuma LB 3000 EX II machine we have for sale. Contact us for more information. Todpfsx D Rvnex Anljb • Distance between spindle noses: 1085 mm • Maximum turning diameter: 340 mm • Bar capacity through main spindle draw tube: 80 mm • Sub spindle bore: 63 mm • Bar capacity through sub spindle draw tube: 52 mm • Rotational speed of driven tools: 45–6000 rpm Additional equipment • Iemca KID 80/16 Plus bar feeder (2022) — KID 80 included • 250 mm SMW chuck on the main spindle • 170 mm Kitagawa chuck on the sub spindle • 6 sets of soft jaws • 4 straight driven tool holders • 4 angled driven tool holders • 2 double turning tool holders • 4 boring bar holders • 8 standard turning tool holders • 8 straight ER holders with about 30 ER collets

Condition: used, Year of construction: 1988, functionality: fully functional, Equipment: documentation/manual, 2-axis CNC lathe, manufactured in 1988, compliant with CE standards FANUC 10-T CNC control Flat guides ASA 5" Bar capacity: 42mm Maximum turning diameter over the bed: 450mm Maximum turning diameter: 250mm Maximum turning length: 400mm Maximum spindle power: 7.5Kw Weight approximately: 2,600 Kg Tedpfx Ansy S R E Ueleb Complete with: Hydraulic tool holder Tailstock 12-position automatic turret Presetting system Chip conveyor Bar feeder interface Part catcher

Condition: used, empty load weight: 3,080 kg, maximum load weight: 3,320 kg, overall weight: 6,400 kg, axle configuration: 2 axles, first registration: 10/2003, loading space length: 7,200 mm, loading space width: 2,500 mm, loading space height: 1 mm, suspension: steel, tire size: 205/65R17.5, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, turntable, leaf spring suspension, ABS (anti-lock braking system), underbody protection, storage compartment. Superstructure: 2-axle special low-bed trailer, loading height approximately 500 mm! GFA axles, drum brakes! Tjdpsy S Tmnofx Anljb The trailer was only used by the police for traffic control and was therefore never really heavily loaded! Spare wheel available for an extra charge! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Condition: used, mileage: 407,186 km, first registration: 11/2011, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 02/2027, color: white, gearing type: mechanical, emission class: euro5, number of seats: 2, total length: 7,900 mm, total width: 2,550 mm, total height: 3,450 mm, loading space length: 6,050 mm, loading space width: 2,390 mm, loading space height: 2,350 mm, Equipment: ABS, tail-lift, M.A.N. 7.150 BL box van with tail lift, suitable for conversion into a motorhome. First registration: November 24, 2011 407,186 kilometers (last oil change at 393,642 kilometers) Euro 5 ABS Radio CD 6-speed manual transmission Cruise control Rearview camera 2 seats (3 registered) Roof hatch Sun visor Electric windows Electrically heated exterior mirrors Rear axle with air suspension, lift and lower function Tires 225 / 75 R 17.5 M&S Box van from Junge, approx. 6050 x 2390 x 2350 mm Partially insulated Tail lift MBB / Palfinger Load capacity 1000 kg Platform length approx. 1800 mm Tjdpfxszb T H Sj Anlsb Valid TÜV inspection until 02/2027 The vehicle was used as a motorhome, but is still registered as a truck (can be changed with little effort). Most of the equipment has been installed in another vehicle (see pictures). Sliding rails are installed in the rear, so the interior can be moved forward, and there is space in the rear to carry 2 motorcycles or similar. Solar panels were installed on the roof of the box van. New intercooler, steering gear, front brakes with discs installed at 377,809 kilometers. VAT is calculated according to § 25a.

Condition: used, functionality: fully functional, PRESSA PIEGATRICE A BARRA DI TORSIONE, 2500x40T,usata revisionata messa a normativa,OMAG PI 4020.FUNZIONAMENTO SOLO IN VELOCITA' LENTA, PER UN UTILIZZO A NORMATIVA SENZA FOTOCELLULE impianto elettrico nuovo, macchina revisionata e COLTELLO SUPERIORE E PRISMA INFERIORE A 5 CAVE, RETTIFICATI CON 2 POSIZIONATORI POSTERIORI REGOLABILI MANUALI . Tsdpfxezhknle Anleb

Condition: good (used), Year of construction: 2007, turning length: 1,065 mm, turning diameter: 470 mm, Chip conveyor SMW 315 3 chuck 2 x Radial live tooling holders 2 x Axial live tooling holders Spindle bore 80 mm BMT-Tooling system Tool measuring probe Spindle hours 6960 / 6270 Running hours Max. turning Ø: 470mm X-Axis: 260mm Z-Axis: 1065mm Spindle bore: 80mm Speedrange: 4200Rpm Todpfxjwq Rpwj Anleb Spindle power: 30kW ATC / revolver: 12 BMT Tool system Speed live tools:6000Rpm Power live tools:7,1kW Length: 3310mm Width: 1900mm Height: 1970mm Weight: 6100kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 132542, turning diameter over cross slide: 470 mm, turning length: 300 mm, turning diameter: 580 mm, spindle bore: 62 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 380 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,839 mm, total length: 1,865 mm, total width: 1,734 mm, overall weight: 3,200 kg, Equipment: documentation/manual, OKUMA LB2000EX-MC x 300mm OSP P200L CNC-Controller Number of axis - 3 Swing over bed - 580mm Swing over cross slide - 470mm Max dia. turning - 360 mm Max turning length - 300 mm X axis travel - 260 mm Z axis stroke - 390 mm Rapid X-axis 25,000 mm/min Z axis rapid 30,000 mm/min Spindle nose - Flat Main spindle speed - 6000 rpm Main spindle power - 11 kW Main spindle diameter - 100 mm Kitagawa 6 inch chuck Driven tools - 6000rpm Driven tools - 5,5kW Turret type VDI 12 Stations Square tool section - 20mm Boring bar section - 32mm Tailstock Quill diameter - 70mm NC tailstock stroke - 415mm Konus - MK 4 Chip conveyor type high Wight - 3200kg One Touch dialog with colour Tjdpfxoxrnr Ne Anlsb High presure coolent

Condition: excellent (used), Year of construction: 2019, CNC Lathe Okuma LB 3000 EX II-MYW 800 Control: OSP-300LA Year of manufacture: 2019 Internal machine no.: 20 Tedpfx Ansyk Tbholeb Distance between centers or spindle noses: 1085 mm Swing diameter over cross slide / bed: 340 / 580 mm X-axis travel: 260 mm Y-axis travel: 115 mm Z-axis travel: 1,010 mm C-axis travel: 360 mm W-axis travel: 895 mm Main spindle speed: 45 - 5,000 rpm Sub spindle speed: 45 - 6,000 rpm Mounting: BMT 60 Tool turret: V12 (driven) Equipment: Chip conveyor One touch IGF Touch setter Main spindle Hainbuch Ø 65 mm Sub spindle SMW Autoblok KNCS-N 170-43 Coolant system HMF-980 with paper band filter Bar feeder / robotics interface prepared

Condition: excellent (used), Year of construction: 2017, CNC Lathe Okuma LB 4000 EX II – M C750 Control: OSP-P300LA Year of manufacture: 2017 Internal machine no.: 22 Turning length: 750 mm Turning diameter: 430 mm Swing diameter over bed: Ø 670 mm Tedpfxoyk Uims Anlsb Swing diameter over carriage: Ø 480 mm Spindle speed: 42 – 4,200 rpm Tool turret: V12 (all stations driven) Equipment: Chip conveyor Touch setter OneTouch IGF 3-jaw chuck Tailstock

Condition: ready for operation (used), Ruwac Model DS 1222 H Industrial Vacuum Cleaner Manufacturer: Ruwac Type: DS 1221 H Weight: approx. 115 kg Todpfxexlngyo Anlsb 2.2 kW EX Zone 22 Class: H You are welcome to arrange a viewing appointment. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, subject to providing a valid VAT ID number. Subject to prior sale. Visit our shop to view our other listings. All brand names and trademarks are the property of their respective owners and are used solely for identification and description of the products. Technical data may vary and errors in the item description are possible and reserved.

Condition: used, Year of construction: 2012, functionality: fully functional, 1 OKUMA CNC Lathe Model LT2000EX-2M1Y with OSPP200LA CNC Controller Including CE mark 1 set 〈European Standard Specification〉 1-1 Spindle motor VAC 11/7.5 kw (5 min./cont. ) 2 set 1-2 Spindle speed 50 - 6,000 min-1 2 set 1-3 Spindle dia. 62/100 mm, 140 Flat nose 2 set 1-4 C-axis control, 360 degree at 0.001 degree increment 2 set 1-5 Y-axis 95mm (+50 to -45) for upper turret 1 set 1-6 Upper V16 (turning & milling) + Lower V16 (turning & milling) Radial turret (No tool holder included) 1 set 1-7 Rotary tool drive motor, PREX 5.5/3.7kw (2 min/count) 2 set 1-8 Rotary spindle speed 45-6,000 min-1 2 set 1-9 Coolant supply system, 0.8kw x 3 sets pump motor 1 set 1-10 Work light, fluorescent lamp 1 set 1-11 Totally enclosed guard 1 set 1-12 Door interlock 1 set 1-13 Chip pan, side chip disposal type 1 set 1-14 Foundation washers and leveling jack screws 1 set 1-15 Machine lifting hooks 1 set 1-16 Chuck auto open / close with confirmation 2 set 1-17 Chuck air blower 2 set 1-18 Lubrication monitor B-1 1 set 1-19 CE mark and EMC 1 set 1-20 Application for IEC standard 1 set 1-21 Double chuck operation pedal 2 set 1-22 Synchronized tapping (for LT2000EX-M) for Milling rotary tool 1 set 1-23 OSP-P200LA CNC Controller with 15" colour display, touch panel 1 set 1-24 OSP-P200LA 3D-M-E kit specifications 1 set *Multitasking machines Coordinate conversion (1 set) *Multitasking machines Profile generation (1 set) *Program storage Standard: 2GB (1 set) *Operation buffer Standard: 2MB (1 set) *Real 3D simulation (1 set) *Cycle time over check (1 set) *Load monitor (spindle, feed axis) (1 set) *NC operation monitor (incl. counter and monitoring Todpfx Ajy Rnbdonleb function) (1 set) *Cycle time reduction function (1 set) *Variable spindle speed control (1 set) 1-25 Pitch error compensation X + Ys + Z 1 set 1-26 Inch / metric switchable function 1 set 1-27 Workpiece jump out detection 1 set 1-28 Status indicator lamp (2-layer lamp) instead of status indicator in 3D-E kit 1 set 1-29 Electrical power source application to suite local power source at each countries (CE transformer) 1 set 1-30 Chuck open/close during spindle rotation (LT-Standard) 1 set 1-set of tools - see last photo

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: V9042700001, Power: Colour / Mono: 65ppm, A4 Counter: Color total: 1,262,651 // BW total: 753,781 Format (cm): max. 45 x 32 SRA3 Gramatur (gr / m2) : up to 300 Resolution: 1200 x 4800 dpi Tedpfx Anou Egzqjlsb Colour : 4 colours Equipment / Additional information: The machine can make brochures, staple and fold.

Condition: used, Year of construction: 1993, Technical details: workpiece thickness - max.: 80 mm workpiece thickness min.: 5 mm plate size without being adjusted: 2000x1000 mm size of plate min.: 100x100 mm longitudinal travel: 2800 mm cross travel: 1000 mm control: CNC Mubea Matic100 hole diameter: min/max:10/40 mm tool taper: Kegel/cone/cono DIN 6327 bore spindle stroke: max. 150 mm positioning accuracy: +/- 0,5 mm spindle speeds:: 112-180-224-280-355-560 U/min traversing speed: 80 m/min feed length: max. 150 mm rapid traverse: 8 m/min work table:: L:2500;B:950 mm workpiece weight: 750 kg deburring device max.: d=40 mm work height max.: 1050 mm arm gripping device: 4 Stück/ pcs opening of gripping pliers min/max.: Typ I: 5/45 mm opening of gripping pliers min/max.: Typ II: 45/85 mm air-pressure connection: 6 bar Tjdpsu Id Ruefx Anljb total power requirement: 30 kw Weight approx.: 5,5 t space requirements approx. LxWxH: 5,0 x 5,5 x 2,7 (je nach Aufstellung) m - plate size with beeing adjusted also 1000x4000 mm possible - with roller conveyor 2x1000mm - material supporting table complete with supporting elements, guidance rail for guidance and transportation of the positioning wagons , cooling of the drill via air pressure - control for 2 axis positioning x-axis 80m/min and y-axis 30m/min, - memory capacity approx. 10.000 programs - position wagon/carriage, 2 material support table, material standard gauge railway, - electric cabinet, control panel, hydr. aggregate accessories: - 1 position trolley, 2 material support tables, material web, control panel, hydraulic unit, deburring device Equipment: - 2 pieces drill sleeves, roller track 1800x1000mm and roller tracks 2x1000mm Machine is not under power and ready for transport. *

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Tjdpfeiyyndsx Anlsb Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome