Used Donau Dr, Danuflex, Danumeric for sale (4,701)

Condition: ready for operation (used), Year of construction: 2018, This DR. HOCHSTRATE SBM 3000/6 was manufactured in 2018. It features a PLC control system, operates on 400/50 V/Hz with a power of 7.5 kW, and handles sheet bending up to 6 mm thick and 3000 mm wide. It includes hydraulic clamping and programmable rear stops. Consider the opportunity to buy this DR. HOCHSTRATE SBM 3000/6 Folding Machine. Contact us for more information. • Gap between the upper tool and the bending beam is a maximum of 260 mm • The top tool cannot be segmented Ijdpfxjx D Rf As Agnjtl • Operating voltage: 400/50 V/Hz • Power: 7.5 kW • Operating pressure: 150 HPa • Control type: PLC • Control voltage: 24 VDC • Bending capacity: sheets up to 6 mm thick and 3,000 mm wide • Hydraulic clamping • Two front stops • Programmable rear stops

Condition: new, SPS gear shift control card New for old For self-installation or installation by one of our service technicians Ijdey Rkkhepfx Agnjtl

Condition: like new (used), Suitable for your Donau DR 28Z, DR 40Z, DR 40 Digi, Danuflex 128 Iedpfey Ri Hnsx Agnetl

Condition: like new (used), Year of construction: 2021, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design • Work table 1800 x 600 mm with 4T-slots • Boom travel 1050 mm • Drill spindle SK 40 with tool clamping device • Stepless speed programming • Stepless spindle feed via three-phase servo motor • 2 T-slots 18 mm on the machine base frame at the back • 2 T-slots 18 mm on the machine base frame on the left • Thread cutting device • Central lubrication • Coolant device • Machine light • CE marking • Safety device • USB interface Dimensions and travel paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Spindle stroke (Z axis) mm 200 Column stroke (W axis) mm 410 Distance from lower edge of spindle - min mm 70 Top edge of table max. mm 680 Distance from bottom edge of spindle - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Cutting values Drilling performance into solid material St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feeds continuously variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis to 1200 mm mm ± 0.075 Itjdpfx Asxn A Spsgnol Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easy to read from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental dimensions, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Sub-program technology: yes Machining cycles Standard software options: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually probing the workpiece for: - any rectangular parts clamped - any round parts clamped - transfer of cast and burnt parts - angular position detection for round parts by probing reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: new, For sale: EMG-DREHMO DR 39 B-40 electric valve actuator. The device comes from warehouse stock – condition: new, unused. Actuator designed for automatic valve control in industrial installations (water, gas, process technology, power engineering). Technical data • Manufacturer: EMG-DREHMO • Model: DR 39 B-40 • Year of manufacture: 2005 • Torque: 40 Nm • Power supply: 380–420 V / 50 Hz • Motor power: 0.40 kW • Speed: approx. 30–40 rpm • Protection class: IP67 Isdpfxoyutpgs Agnotl Condition Device is brand new – warehouse condition. Visible transport marks: slightly bent handwheel, small crack in housing by the gearbox (visible in photos). Not tested under voltage – sold as warehouse device / to be checked before installation. Scope of delivery • EMG-DREHMO valve actuator • Handwheel for manual operation Visual condition as per photos.

Condition: excellent (used), Year of construction: 1976, functionality: fully functional, machine/vehicle number: ZFM300H 76 2301, RACK MILLING MACHINE Itjdpfeykpl Nex Agnol

Condition: used, Year of construction: 1971, hobbing length 1750 mm milling width 260 mm max. module 10 table size incl. water gutter 460 x 2100 mm table clamping surface: 250 x 1850 mm cutter width - max. 100 mm feed of the milling slide, stepless 0 - 500 mm/min. Itjdpfjy Ayrrsx Agnel rapid traverse feeds 3000 mm/min milling head -swivable +/- 30 ° Rotation speed range of milling head, in 9 steps 29 - 178 rpm Milling head swivable 2 sides helical gearcutting 30 ° total power requirement 4 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,85 x 1,85 m Milling length 1750 mm Milling width 260 mm Module - max. 10 Table dimensions incl. water channel 460 x 2100 mm Table clamping surface: 250 x 1850 mm Milling cutter width - max. 100 mm Feed of the milling carriage, infinitely variable 0 - 500 mm/min. Rapid traverse 3000 mm/min Milling head - tiltable + / - 30 ° Speed range of the milling spindle, in 9 steps 29 - 178 rpm Milling head swivels on both sides for helical gearing 30 ° Machine weight approx. 4 t Space requirement approx. 4 x 1.85 x 1.85 m Equipment/accessories - 7 vices - change wheels - Clamping devices - documentation

Condition: used, Used IKA model DR 2000/30 ATEX stainless steel Dispax-Reactor. Maximum flow rated 4,000 l/h, Maximum viscosity 5000mPas (product independent). Driven by approximately 58kw electric motor. Includes frequency inverter. Iodpezun Ebjfx Agnetl

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Canon imageFORMULA DR-G2140” document scanner Item for sale: 1x Canon imageFORMULA DR-G2140 with the following features: Includes duplex scanner Meter readings: Total: approx. 3,125,070 Ijdpez Az Sbjfx Agnetl Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or yellowing). The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1,6 t The Professional 750 3000x1500x200 mm table has a diagonal hole arrangement on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X Ijdpfx Agogvkc Njnjtl

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 1,0 t Itsdpfogvkfvex Agnjl The table Professional 750 Article no. 2400x1200x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1,6 t The table Professional Extreme Article no. 7D 3000x1500x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. Iodpfx Agsgvkdbonjtl The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X

Condition: new, Year of construction: 2023, feed pressure 10.0 bar Effective free air delivery 700 L/min Itedpfx Aoxaahxjgnsl motor 400 V 0 250 Liter weight of the machine ca. 397 kg. total power requirement 5.5 kW range L-W-H 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price: 8.848 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

Condition: new, Year of construction: 2022, feed pressure 10.0 bar Effective free air delivery 1.950 L/min motor 400 V 0 250 Liter weight of the machine ca. 467 kg. total power requirement 15.0 kW range L-W-H 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 13.576 euros / special price on request Made in Germany Iedpfew U U Scex Agnetl Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

Condition: excellent (used), RETSCH ZM 200 Ultra Centrifugal Mill with DR 100 Feeder Manufacturer: RETSCH GmbH Type: ZM 200 Machine Type: Ultra Centrifugal Mill / Fine Grinding Mill Accessories: RETSCH DR 100 Feeder For sale is a used RETSCH ZM 200 Ultra Centrifugal Mill with RETSCH DR 100 Feeder and extensive accessories. The ZM 200 is designed for the fine grinding of sample material and is offered together with the DR 100 feeder shown in the images, various sieves, rotors, collection and feed components, and other accessories. Technical data: Manufacturer: RETSCH GmbH Model: ZM 200 Device type: Ultra Centrifugal Mill Power supply: 1~ 200–240 V / 50–60 Hz Power according to nameplate: 1,100 W Current consumption: 12 A Operation: digital control and display panel Interfaces: RS232 / RS485 Connection for DR 100 feeder CE marking Feeder: Manufacturer: RETSCH GmbH Type: DR 100 Device type: Feeder / Vibration Feeder Digital control and display panel Start/Stop operation Feed hopper and feed chute as shown in the images Dimensions: ZM 200 (L × W × H): 515 × 410 × 365 mm Equipment: RETSCH DR 100 Feeder Feed hopper Feed chute Rotor / grinding tool as shown in the images Itedpfx Ajzxqhysgnel Various ring sieves / sieve inserts Collection container Filling and collection components Filter bag Various RETSCH spare parts and accessories Operating manual ZM 200 Operating manual DR 100 Other accessories as shown in the images Transport data: Dimensions ZM 200 (L × W × H): 515 × 410 × 365 mm Weight: not specified / not determined Transport or shipping possible by arrangement Condition: Used Device shown in operational state. Display and control panel shown in active state. Optical condition as shown in the images. Signs of wear and tear are present. Scope of delivery: 1 × RETSCH ZM 200 Ultra Centrifugal Mill 1 × RETSCH DR 100 Feeder Feed hopper and feed chute Rotor / grinding tool as shown in the images Various ring sieves / sieve inserts Collection container and filling components Filter bag Operating manual ZM 200 Operating manual DR 100 Extensive accessories as shown in the images Availability: by arrangement. Scope of delivery as shown in the images. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 2010, Overview  This rotary cold-glue labelling machine was manufactured in 2010 by the Spanish company Auxiemba. The model BASIC 600-10-CF-I-DR is designed for applying paper or polypropylene labels onto cylindrical glass bottles using cold-glue technology. It is equipped with formats for 330 ml, 500 ml, and 750 ml bottles, making it suitable for wineries, breweries, and beverage producers. The machine is being sold due to the closure of a production line and is available in very good working condition. Itedexl Di Djpfx Agnol Technical data  - Capacity: up to 10,000 bottles/hour - Bottle formats: 330 ml, 500 ml, 750 ml - Bottle height range: 50–360 mm - Bottle diameter range: 40–160 mm - Label length range: 30–140 mm - Rotation direction: Clockwise - Number of bottle plates: 10 - Number of labelling stations: 1 - Air consumption: 125 L/min - Power consumption: 17.3 kVA, 400 V - Working height: 1,100 ± 50 mm - Construction: Stainless steel frame, enclosed safety housing - Control system: Micro PLC with touch-screen for speed, production, and fault management - Key features: - Cold-glue labelling head with oil-bath lubricated mechanisms - Central carousel with centering bases for precise bottle positioning - Pneumatic heated pump for adhesive circulation and return system - Automatic bottle synchronization with infeed screw to prevent breakages - Micrometric glue adjustment to reduce film thickness and ensure clean labelling - Bottle retainers for smooth handling and reduced congestion - Gear-driven transmission with clutch and emergency stop system - Compact, fully enclosed design for hygiene and safety  

Condition: used, Year of construction: 2013, Overview  The pressure filler was built in 2013 by the German manufacturer KHS. The pressure filler is still in use at a large German brewery and can be inspected at any time.  Technical data  - Capacity: 22,000 - 65,000 bph  - Number of filling stations: 168 - Number of capping stations: 24  Itedpfx Agel Sm S Donjl - Pitch circle filler: 5040 mm Scope of delivery  - Valve node - Vacuum unit - Hygienic inlet - Fill level and closure inspection - Rejection and rejection belt - Technical documentation - Incl. program backup - Extensive transporters available, which can be purchased additionally

Year of construction: 2010, condition: ready for operation (used), A fully automatic industrial ABL apple peeling, coring and slicing machine is available. Throughput capacity: approx. 250-500kg/h, max. apple capacity: approx. 50/min, recommended fruit diameter range: approx. 60-100mm, peeling system: double peeling head (retrofit for peeling operation possible), ring slice thickness range: 3-15mm, number of segments: 18, min. ring thickness: 10mm, weight: 1.4t. With ABL SPFL 50 washing basin, weight: 600kg and crate tipper. The machine is currently unable to peel but can be retrofitted. Documentation available. An on-site inspection is possible. Itjdpfx Aeznmxaognjl

Year of construction: 1991, condition: ready for operation (used), Dalex DR-F 2 0.35 m³/h 220 Volt No. 109115732 Year of manufacture 1991 Refrigerant R12 – needs to be refilled. Itodpfxjftbtmj Agnel

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2005, total length: 11,170 mm, total width: 2,450 mm, suspension: air, tire size: 385/55, tire condition: 30 %, color: other, Year of construction: 2005, Axle configuration Tyre size: 385/55 Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 30% Itjdpfx Aezudciognsl Rear axle 2: Max. axle load: 9000 kg; Tyre profile: 20% Rear axle 3: Max. axle load: 9000 kg; Tyre profile: 20% Weights Empty weight: 5.360 kg Carrying capacity: 35.640 kg GVW: 41.000 kg Identification Registration number: OH-91-YL

Condition: used, Magnification: 10×/40×, eyepieces: W 10×/20, free working distance: 92mm, field of view at 10×/40×: 20mm/5mm, illumination: integrated reflected light and transmitted light, mixed-light operation possible. Machine dimensions X/Y/Z: approx. 230mm/300mm/350mm, microscope body weight: approx. 1.5kg, stand weight: approx. 3.5kg. An on-site inspection is possible. Iodpezww Svjfx Agnstl

Condition: good (used), Rotary table Isdpfx Aozwxwtegnetl Manufacturer: Schuma Stock number: 2960-2 Year of manufacture: 2014 Type: DR-1300 Machine number: Diameter: 1,300 mm Rotational speed: adjustable Connection: 0.17 kW Dimensions: 1,800 x 1,300 x 800 mm Weight: approx. 80 kg Condition: needs to be reconnected, cables have been cut Sold at a special price in its current condition.

Condition: used, color: other, first registration: 08/2006, Year of construction: 2006, Serial number: HSF 9010 ECO-P We have a stock of >100 axles. Isdpfx Aezp U I Esgnetl Please contact us if you can't find what you are looking for.

Condition: used, Year of construction: 1986, Surface Grinding Machine MONOPRECIS 1DR - #2 Isdozwgrrjpfx Agnstl Travel X: 400 mm Travel Y: 150 mm Maxi grinding height (Z): 220 mm Year of construction: 1986 Axes X - Y - Z manual Magnetic chuck: manual / tilted Magnetic chuck dimensions: 255 x 130 mm Grinding wheel dimensions: Ø max 170 mm Voltage: 380 V Dimensions (L x W x H): 1300 x 1100 x 1600 mm Weight: approx 500 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: CR-16/994882, Demag EPKE-O bridge crane, hall crane, crane, crane gantry, crane runway Load capacity / lifting capacity 3.2 - 3200 kg Gauge approx. 17000 mm, overall dimension approx. 17200 mm Demag DR-COM wire rope hoist 3200 kg (EKDMR 3) Lifting height 10 m with floor control and fine positioning Overall height from top of crane to hook approx. 1100 mm Head beam length with buffer approx. 2.8 m Crane is dismantled and available immediately Very good, used condition Column-mounted swivel cranes and wall-mounted swivel cranes are also available Iedpfx Agszh Uylsnetl Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible, please inquire with your postal code Collection is preferred