Used Dumeta D-Tlrs-10-D for sale (65,864)

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 02/2009, total width: 2,550 mm, suspension: air, wheelbase: 5,570 mm, Year of construction: 2009, Cuppers 3-deck trailer 83-WD-LH 02-2009 BPW axles Automatic doors Swing floorboards Folding roof 3 decks Fans Remote control release = Further information = Suspension: Air suspension Front axle: Twin wheels; Max. axle load: 10,000 kg Rear axle: Twin wheels; Max. axle load: 10,000 kg Unladen weight: 6,520 kg Payload: 13,480 kg Gross vehicle weight: 20,000 kg Technical condition: good Visual condition: good Registration: 83-WD-LH Nodpjywttxofx Aazewl

Condition: used, mileage: 153,000 km, power: 70 kW (95.17 HP), first registration: 12/1992, overall weight: 3,200 kg, fuel type: diesel, color: red, next inspection (TÜV): 12/2025, gearing type: mechanical, Year of construction: 1992, total length: 5,345 mm, total width: 1,975 mm, total height: 2,680 mm, number of seats: 9, Equipment: had accident, parking heater, Original German vehicle. In service with a small municipality until 2026, initially with the fire department and then with the municipal depot. This vehicle has a civilian truck registration as a "closed-body truck" and the papers indicate a total of 9 seats. The vehicle was initially used as a multipurpose vehicle (MZF), and later the municipality's lawnmower was transported in it. Only one bench seat is permanently installed. Two of the three bench seats were not needed in recent years and are included as loose items. The seatbelts and mounting screws are also included in their original condition. A folding table with a radio headset is still mounted on the left side, and an original large fire department first-aid kit is integrated into the interior. Engine: OM 602, 5-cylinder naturally aspirated diesel with 2874 cc. The engine always starts perfectly and initially runs smoothly, but after approximately 20 seconds of idling, the idling performance deteriorates significantly, and smoke starts to appear. When the engine reaches operating temperature, the smoke decreases, and the engine runs smoothly again, almost normally. The engine is either severely worn or has an engine malfunction. No precise diagnosis has been made yet. The vehicle starts immediately and functions well, and the usual engine power was fully available during a short test drive, but we do not guarantee its drivability. A repair is certainly necessary in the short term! For driving short distances or loading onto a RORO ship in the port heading to Africa, this 310 D appears to function without any problems. 5-speed manual transmission. 127 km/h. Ball-type trailer hitch with a 2000 kg braked or 750 kg unbraked towing capacity. Power steering. Original Mercedes/Eberspächer auxiliary heater (operational). Nwodpfxeyx N Hqj Aazel Body with individual rust spots; overall, it is still relatively well-preserved due to being stored in a garage for many years. The window of the passenger door is damaged and covered with a film. The paintwork has been repaired in black around the lower part of the vehicle. Apparently, the car was always very well maintained at the fire department, but unfortunately not afterwards! The running board on the sliding door – which is still visible in the photos – has been removed for use on another vehicle and is no longer present. Unladen weight: 2370 kg. Permissible total weight: 3200 kg. Overall vehicle dimensions: Length 5345 mm / Width 1975 mm / Height 2680 mm. The tires (205R14C) are from 2013 and are not porous, with approximately 50-60% tread depth. The vehicle is primarily intended for export or for genuine fans of the Bremen transporter who are looking for a completely unaltered base for restoration. The TÜV (technical inspection) expired in 12/2025 and will not be renewed. We have deliberately kept the purchase price attractive, as comparable vehicles in good condition are now usually sold for twice the price or even higher. A personal inspection is highly recommended due to the defects and can be arranged by appointment. This offer is only valid for commercial businesses, freelancers, and emergency services of all kinds. Unfortunately, sales to private end consumers are generally excluded. Subject to prior sale and errors. The purchase price is gross = net, with no VAT (according to §25a UStG / differential taxation).

Condition: excellent (used), functionality: fully functional, Manufacturer: Günther Nwsdswqgxhjpfx Aazsl Type: DP15/10 10 sections Includes cable PRICE REDUCED FROM 1250 TO 900 EUR!!!

Condition: new, Year of construction: 2025, Schneider compressor UNM 510-10-90 D A714000 Njdpfx Aaebyhvrszewl Mobile piston compressor with horizontal tank Standard equipment includes all safety fittings and an electrical connection cable with plug and Condor pressure switch Compressed air tank equipped with a safety valve, tank pressure gauge, and condensate drain valve The welded-on rear handle improves loading and transport capabilities Fully automatic operation via a pressure switch with start-up relief, motor protection, and on/off switch Featuring enhanced equipment for universal use With V-belt drive, 2 cylinders in an in-line arrangement for particularly smooth operation, and a 400 V three-phase motor with external motor protection Low compressor speed – this protects the compressor components, reduces noise levels, and minimizes vibrations Large fan impeller for optimal cooling Including filter pressure regulator for regulated compressed air that is free of condensate, dirt, and oil With a 2 m device connection cable with rubber sheathing and an air outlet via a quick-release coupling Device connection cable with phase inverter 10-year warranty on the tank against rust Technical data Pressure: 10 bar Intake capacity: 510 l/min Delivery capacity: 390 l/min Speed: 1240 min-1 Tank volume: 90 l Weight: 80 kg Noise: 97 dB(A) Dimensions (W x D x H): 1070 x 495 x 895 mm Drive power: 3.0 kW Voltage: 400 V Location: In stock at Bitburg warehouse Subject to prior sale.

Condition: new, sheet width 3100 mm plate thickness 10,0 mm thickness at "Niro-steel" 6,0 mm down holder 14 Stück no. of strokes 13 Hub/min oil volume 260 ltr. cutting angle 2,0 ° throat 350 mm engine output 22,0 kW back stop - adjustable 1.000 mm weight 10.575 kg. range L-W-H 4,05 x 2,5 x 2,17 m ----- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control Nodpfxjxabdbe Aazjwl * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: excellent (used), Accessories: Control system Manufacturer: Allen Bradley Type: Ethernet 10/100 Adapter 1794-AENT (28685 IV) Nedpfx Aaex Rqt Nozewl

Year of construction: 2014, operating hours: 175 h, condition: used, For sale, a BOMAG BPR 100/80 D/E reversible plate compactor from 2014. Nedpfxoz Daz Rj Aazewl Heavy-duty professional plate compactor, suitable for compacting soil, sand, foundations, and paving. The machine has only 175 operating hours and is in good used condition. Brand: BOMAG. Model: BPR 100/80 D/E. Year: 2014. Operating hours: 175 hours. Forward and reverse operation. Heavy-duty construction. Professional BOMAG machine. The machine can be viewed, tested, and collected directly from our location in Deventer, the Netherlands. For more information, photos, videos, or pricing, please contact us. Pieter Haverhoek. Haverhoek Trucks B.V. Zweedsestraat 6. 7418 BG Deventer. The Netherlands. = Further information = Year of manufacture: 2014 Dimensions (L x W x H): 100 x 80 x 135 cm Working width: 80 cm CE marking: yes Overall condition: very good Technical condition: very good Optical condition: good

Condition: used, Year of construction: 2008, - Brand: Iveco - Type: Daily 35C18 - odometer: 137603 - Year built: 2008 - APK: Power: 130 kW (180 hp) - Gearbox: 6 gears, manual - Operating weight: 1890 kg. - Total weight: 15.000 kg. - Towed vehicle with brakes: 13,000 kg. - Number of seats: 3 - Emissions class: Euro 4 - Brand: Veldhuizen - Type : P37-10 - Year of construction: 2008 - EXP: Total weight: 13.000 kg. - Load capacity: 10,170 kg. - Loading floor under: 600 cm. - Loading floor upper: 303 cm. - Loading floor width: 220 cm. - Fuel tank with fill hose under trailer - Maintenance history available - Trade-in and transport possible - Video and more photos on our website *Type: Daily 35C18 * Brand: Iveco kilometer reading: 137603 Nsdpfxez Dpk Ie Aazswl * Construction year: 2008 Gearbox: 6 speeds, manual * APK: Power: 130 kW (180 hp) Empty weight: 1890 kg. Total weight: 15,000 kg. * Towed trailer brake: 13,000 kg. Number of seats: 3 Emissions class: Euro 4 * Loading floor underneath: 600 cm. Loading floor on top: 303 cm. Loading floor width: 220 cm. Brand trailer: Veldhuizen Type trailer: P37-10 APK trailer: Total weight of trailer: 13,000 kg. Payload capacity trailer: 10.170 kg. Maintenance booklets: Available Number of keys: 2

Condition: like new (used), Year of construction: 2020, load capacity: 1,000 kg, lifting height: 5,350 mm, construction height: 2,899 mm, operating hours: 1,478 h, fuel type: electric, mast type: duplex, Manufacturer + model: LINDE V 10 / Mast: 2W5350 ID: 26063.5270 Category: Demo Mast: 2W Lowered height: 2900 mm Lifting height: 5350 mm Capacity: 1000 kg Platform height: 4750 mm Nsdpfezv Rvlsx Aazowl Picking height: 6350 mm Cabin width: 1200 mm Year: 20 Operating hours: 1,477 hours Battery capacity: 24V / 930Ah Options: FULL options!! - DOUBLE steering!!! - Special SAFETY gates!! - Adjustable forks! - 2 x Blue spot

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust SC 10 Nwsdpfx Aasyx Tktjzsl -Tire size: 5.00-8 SC 10 RIM 3.00 D -Bolt circle: Ø 100 x 16 mm -Hub bore: Ø 60 mm -Quantity: 1 piece available -Dimensions: Ø 460 x 117 mm -Weight: 19 kg

Condition: used, turning length 1000 mm turning diameter 330 mm Nwsdpfxszlukxo Aazol turning dia. over face-slide 198 mm turning dia. in gap 476 mm spindle bore 38.0 mm turning speeds 70 - 2000 U/min bed width 180 mm spindle taper DIN ISO 702-2 Nr. 4 taper in tailstock 3 MK quill travel 110 mm total power requirement 1.5 kW weight of the machine ca. ca. 610 kg. range L-W-H 1930 x 755 x 1300 mm Features - Ideal for technical schools, repair shops, and training workshops - Modern main spindle bearing assembly with precision-grade angular contact ball bearings - Single-lever chuck for the tailstock, adjustable for taper turning - Hardened and ground gears and shafts in the gearhead - Optimally suited for machining steel, non-ferrous materials, and plastics - Removable bridge for machining workpieces with large . diameters - To minimize the effects of vibration, the solid prismatic bed . is additionally equipped with ribs - The speed and feed rate adjustment is simple in design, smooth-operating, and . can be shifted precisely Scope of delivery: - 3-jaw chuck - MULTI-FIX tool holder with insert - Safety guard for the 3-jaw chuck - Slip clutch - Coolant system - Foot pedal with brake function, CE-compliant - Rear splash guard - Machine light - Base frame

Condition: used, Planing machine with planing shaft at the bottom and top Double-sided planing machine Feed rate steplessly adjustable up to 110 m/min Nodpfx Aasy Ry Ddjzowl Planing width max. 310 mm Electrical power 95.75 kW Bottom: 37 kW Top: 45 kW Feed: 13 kW Jointing mechanism at the bottom and top Good condition

Condition: good (used), Valve block, hydraulic control block for hydraulic pump, hydraulic unit, control block, hydraulic control block, control unit, control valve, servo valve Njdpfov U Rimox Aazjwl -Control block: Hydraulic control block -Valves: 23 P1 M/10 D4 P4-S1/20H -Individual components: see photos -Shipping/Price: complete -Dimensions: 270/270/H315 mm -Weight: 27 kg

Condition: used, Year of construction: 2019, operating hours: 15,551 h, functionality: fully functional, controller manufacturer: Siemens, controller model: SINUMERIK 840D sl, General Year of manufacture: 2019 Operating hours: 15,551 Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 600 mm Maximum cutting circle mm 200 Stroke over center mm 100 Maximum clamping diameter mm 110 Tip diameter mm 30 – 60 Working area Longitudinal stroke Z-axis mm 705 Longitudinal stroke Z-/W-axis mm 705 / 705 Cross stroke X-axis mm 180 Cross stroke X-/U-axis mm 180 / 180 Steady Z3-axis depends on the chuck Workpiece C21-/C22-axis degrees 360 Tool Outer diameter mm 700 Tool holder Short cone according to DIN 55026: Size: 8 Theoretical diameter of cone mm: 139,735 Tool drum bearing diameter in the front bearing: 160 mm Chuck mount: 180 mm Chuck diameter up to 260 mm Nedpfxjwgm Hko Aazowl Workpiece spindle bearing diameter in the front bearing: 170 mm Guidance system for machining units: Rolling guides with rollers, size 55 Spindle Maximum power at 100% load: 24 kW Spindle speed: 0-2000

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 18 rpm -Power: 0.075 kW -Construction: B3 -Diameter shaft: 17 mm -Protection class: IP 54/65 -Price: per piece -Number: 2x available -Dimensions: 280/145/H140 mm Nwedpfxec Uz Hxe Aazsl -Weight: 6.7 kg

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 42.5 rpm -Power: 0.075 kW -Construction: B3 -Diameter shaft: 17 mm -Protection class: IP 65 -Price: per piece Nwedjc U I Elspfx Aazsl -Number: 1x available -Dimensions: 295/170/H160 mm -Weight: 7.8 kg

Condition: excellent (used), Vibration damper, compensator, damper, expansion compensator, expansion piece -Manufacturer: Sternflex, steel expansion compensator type SA-10 unused Nedpfoigrv Nox Aazjwl -Size: DN 50 PN 16 -Machines: for noise dampening and absorption of small vibrations -Material: stainless steel 1.4541 -Number: 28x dampers available -Price: per piece -Dimensions: Ø 79 x 206 mm -Weight: 0.9 kg/piece

Condition: excellent (used), Vibration damper, compensator, damper, expansion compensator, expansion piece -Manufacturer: Sternflex, steel expansion compensator type SA-10 unused -Size: DN 32 PN 16 -Machines: for noise dampening and absorption of small vibrations Nedpfx Aaeigrwbezjwl -Material: stainless steel 1.4541 -Number: 13x dampers available -Price: per piece -Dimensions: Ø 53 x186 mm -Weight: 0.5 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders, clamping cylinders -Manufacturer: Festo, standard cylinder double-acting type DNN-63-10-A -Stroke: 9mm -Piston: Ø 63 mm -Piston rod: Ø 20 mm / M16 x 1.5 Nedpfeizxrcox Aazewl -Max. Pressure: 12 bars -Dimensions: 205/80/H110 mm -Weight: 2 kg

Condition: used, empty load weight: 7,720 kg, maximum load weight: 26,280 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 08/1998, loading space volume: 60 m³, total length: 13,310 mm, total width: 2,550 mm, total height: 3,950 mm, suspension: air, tire size: 385/65R22.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, ADR equipment, aluminum rims, 3-axle, Kässbohrer axles, air suspension, lifting+lowering, ABS (anti-lock braking system), catwalk, storage box Body: Tipping silo 60m³ ADR With electric tipper pump! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Nwedpfxevhhvds Aazel - .

Condition: good (used), Frequency converter, frequency converter, drive inverter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, inverter, servo drive, servo control, power supply -Manufacturer: Hauser, Servo Drive basic device -Type: 951-300000 NMD 10/B -Dimensions: 450/80/H350 mm -Weight: 7.3 kg Nsdpfx Aasn Nbm Eozjwl

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: DG11000SE, overall weight: 210 kg, fuel type: diesel, tank capacity: 30 l, color: white, power: 8 kW (10.88 HP), output frequency: 50 Hz, type of output current: three-phase, nominal power: 8 kW (10.88 HP), nominal power (apparent): 10 kVA, continuous power: 8 kW (10.88 HP), total length: 1,050 mm, total width: 700 mm, total height: 860 mm, rotational speed (max.): 3,000 rpm, type of cooling: air, We present the portable power generators for your uninterrupted power requirements. Newpower generator DG11000SE -3D model power generator The DG11000SE -3D power generator offers you a continuous output of 8 kW with its reliable 4-stroke 3000 rpm engine. You can operate the DG11000SE -3D power generator with its 30L tank for up to 8-10 hours. You can start the generator using the electric start or the cable pull. The starter battery is charged during operation, making it easy to start the next time you use it. TECHNICAL DATA Frequency (Hz): 50 Maximum power (kW): 8.0 Rated power (kW): 7.5 Nominal voltage (V): 230/400 Power factor (cosφ): 1.0 DC output: 12V/8.3A Power: single-phase-three-phase Generator type: self-excited alternator, 2-pole single-phase or three-phase Starting device: E-start or rope pull Noise level (7m): 70-73 dB Tank capacity (L): 30 Dimensions: 1050x700x860 mm Weight: 210kg ENGINE DATA Model: HR198FA Engine type: Diesel engine four-stroke, air-cooled, vertical cylinders Bore* stroke ( millimeters ): 98*84 Fuel: Diesel Oil lubrication Quantity (L): 2.0 Combustion system: Direct injection Functions Voltmeter: Yes Nodpfx Aetmuwieazswl Sockets: Yes Circuit breaker: Yes Oil light and oil alarm: Yes Wheels: Yes DC switch: Optional Control unit: Optional ATS: Optional Remote control: Optional

Condition: good (used), geared motor, electric motor -Speed: 19.5 rpm -Power: 0.18 kW Njdpfx Aasb A Rntjzowl -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 22 kg

Condition: good (used), Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller -Manufacturer: single, temperature controller Digitemp Q -Type: TQD 3110 D Nwsdjudqbispfx Aazsl -Measuring range: 0 to 399 °C -Dimensions box: 220/130/H135 mm -Weight: 0.8 kg

Condition: good (used), Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -Dimensions: 275/275/H225 mm Nwsdpfx Aofcl H Isazel -Weight: 8.1 kg