Used Ebro Pn10 for sale (88)

Condition: used, maximum load weight: 28,350 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 06/2011, Year of construction: 2011, Approx. 22,500 litre capacity, single-compartment, V2A stainless steel design. 10 t fifth wheel load, 3 x 9 t axle unit. Tank code according to ADR 2009: L4BH. Specification: Cylindrical, self-supporting tank, diameter 1,800 mm, made from V2A stainless steel. Tank internal surface ground smooth to 2B finish. The tank is single-compartment, fitted with 2 baffle walls. The end plates are designed as dished ends. Operating parameters: Operating overpressure 2.67 bar. Test pressure 4 bar. Vacuum resistance -0.21 bar. Operating temperature 50°C. 3 manholes DN 500 with hinged dome covers, each with 6 toggle fasteners. 1 continuous stainless steel overflow box, rubberised to the upper edge. Plastic drainpipes run from the overflow box to the bottom edge of the tank. The drainpipes are equipped with plastic ball valves and plastic hoses. Tank internal rubber lining: The tank is lined internally with HAW W08 rubber lining. Material outlet: At the bottom, a pneumatically operated, coated bottom hatch DN 80, brand Ebro, is fitted. The rubber-lined material outlet is routed to the rear right, equipped with a DN 80 butterfly valve, TW-MK coupling, and a blanking cap. Blow-out device for complete hose emptying provided. Dome fittings: The following fittings are mounted in the dome sump: 1 compressed air connection 2" with 2" shut-off valve. 1 pressure relief 2" with 2” shut-off valve and pipe bend. 1 vacuum valve, brand Hasteloy, with response pressure -0.21 bar. 2 flanges DN 50 with blind flanges for retrofitting a safety valve (required only for transporting hypochlorites). At the rear of the dome sump, a DN 80 flange with blind flange for retrofitting a top discharge is fitted. Compressed air fittings: A 2” plastic compressed air line made of PVDF is routed upwards into the tank. Compressed air system: Lower right. Equipped with pressure gauge, safety valve, non-return valve, and pressure relief/gas rocking connection TW 50. Compressed air connection TW VK 50 with blanking cap. Walkway: On the top left side, a full-length aluminium open grid walkway, width 400 mm, with a stainless steel safety folding guardrail (can be raised from below) and a stainless steel handrail. Rear left, a stainless steel access ladder installed. All tank supports for chassis, fifth wheel plate and landing gear made from electropolished stainless steel. Running gear: Axle unit, brand BPW type ECO, 3 x 9 t disc brakes, Ø 430 mm. The air-suspended, rigid axle unit is mounted in FFB stainless steel suspension brackets. Axle spacing 2 x 1310 mm. A pneumatic raise/lower valve is fitted on a control panel ahead of the first axle on the vehicle. One lift axle, driver-controlled from the cab, with traction aid (up to 30 km/h). Brake system: 2-sensor, 2-module ABS/EBS air brake system with spring-loaded brake cylinders on two axles. Axle load display via CAN bus in the tractor unit display. Tyres: 6 tyres, brand Michelin, size 385/65 R22.5 provided. Rims: Forged aluminium rims, brand Alcoa, type Dura Bright, size 22.5 x 11.75, offset: 0 mm, wheel bolt holes: 26 mm. Lajdoy A U Dpepfx Aiwsb ADR equipment: Includes: 1 fire extinguisher (6 kg) with holder and protective cover, 1 set of warning signs in compliance with legal regulations, earthing lugs, 1 ground drag, 1 earthing cable reel. Equipment: Electrical installation 24 volt.

Condition: ready for operation (used), Year of construction: 2012, workpiece width (max.): 60 mm, product length (max.): 7,845 mm, Edgebander manufactured in 2012. This HOMAG KAL211 Edition 2264 features a working height of 950 mm and accommodates workpiece thicknesses from 8 mm to 60 mm. It includes various units such as a gluing unit, joint trimming unit, and pre-milling unit, enhancing its versatility. If you are looking to get high-quality edge banding capabilities, consider the HOMAG KAL211 Edition 2264 machine we have for sale. Contact us for further details regarding this machine. Laodpjy Hi Eiefx Aiwsb • Feed speed: 18–25 m/min • Feed speed (max with FK11 unit): 20 m/min • Working height: 950 mm • Pneumatic connection: 6 bar • Total length: 7845 mm • Workpiece width (min): • 60 mm at 12–22 mm thickness • 105 mm at 23–40 mm thickness • Workpiece thickness: 8–60 mm (extended via options • Edge material thickness: • Rolls: 0.3–3 mm • Strips: 0.4–20 mm • Electrical: • Supply voltage: 400 V / 3 Ph / 50 Hz • Total load current: 67 A • Control voltage: 24 V • Control system: powerControl PC22 (Windows XP based) • Software: woodCommander; woodScout (option); Schuler MDE Basic • Aggregates/units: • Separation agent spraying unit (top/bottom) • Joint trimming unit (2 motors, 4 kW each) • Gluing unit A20 with 2 rollers (Quickmelt system) • PU65 application unit (exchangeable, Teflon coated) • Preparation for laserTec activation unit • End trimming unit HL84 (0.8 kW) • Pre-milling unit BF10 (1.5 kW) • Multi-profile form milling unit FK11 (manual adjustment) • Profile scraper PN10 • Finish unit (glue joint scraper + buffing unit) • Cleaning agent spraying unit Additional equipment • Automation package (No. 4013): • Automatic adjustment of infeed fence and pressure zone • Electronic height adjustment for the top pressure beam

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 0-200-07-9819, Type: KAL210 / EDITION Machine no.: 0-200-07-9819 Year: 2011 Single-sided machine for machining straight workpiece edges. Edge banding and post-processing of various edge banding materials, in through feed lengthwise and crosswise. POWER CONTROL control PC22 Control system Windows PC Hardware: PLC control Integrated stretch control for contact-free control of the machining units Operating system Windows XP Industrial PC 10" TFT monitor with touch screen, selection and setting of all necessary production parameters, such as: program selection and workpiece thickness adjustment. PC keyboard and mouse USB connection Network connection Remote control Setting operation, start feed, emergency stop switch Unit equipment: -Release agent application unit -Joint milling unit -Glue unit A20 with 2 rollers -Cutting unit HL84 -Pre-milling unit -Shape milling unit FF32 -Universal milling unit UF10 -Profile sanding unit PN10 -Finishing unit (glue joint sanding unit + polishing brushes) Technical data Minimum workpiece width: for thicknesses 12-22 mm, 60 mm for thicknesses 23-40 mm, 105 mm Lsdpfx Aieyn Ilpowjab Workpiece overhang 30 mm Workpiece thickness 12-60 mm Molding material on roll 0.3-3 mm Molding cross-section max: For PVC 135 mm2 For veneer 100 mm2 Molding material strips 0.4-20 mm Edge cross-section for strips 900 mm2 Working height 950 mm Pneumatics 6 bar Power 400 volts, 50 Hz, 3-phase NOTE Subject to incorrectly published technical data.

Condition: new, For sale: new, unused KSB Etachrom B industrial pump – complete, in original packaging, with manufacturer’s documentation. The pump is designed for industrial and process applications – high-quality workmanship, made in Germany. Technical data (from the nameplate): Manufacturer: KSB Series / Type: Etachrom B Flow rate (Q): 18.0 m³/h Head (H): 45.0 m Lsdsyhhqxepfx Aiweab Impeller diameter: Ø 181 mm Rotational speed: 2904 rpm Operating pressure: PN10 Medium viscosity: 1.0 mm²/s Year of manufacture: 2023 Made in Germany Certifications: CE, EAC, UKCA Condition New – ex stock Never commissioned Original box Operating/installation manual included Condition exactly as pictured Applications Industrial installations Process systems Cooling, process water Technical and production installations

Condition: new, ///// PRICE QUOTED PER 1 UNIT ///// For sale: new submersible pump Wilo EMU KS15 – a professional device from the renowned German manufacturer Wilo. The pump is designed for operation in demanding conditions – ideal for dewatering, pumping stations, and industrial applications. The equipment is brand new, complete with documentation and accessories shown in the photos. ⚙️ Technical specifications: Manufacturer: Wilo (Germany) Model: EMU KS15 Power supply: 3~400V / 50 Hz Power: 1.30 kW Current: 3.15 A Degree of protection: IP68 (typical for submersible pumps) Max. delivery head: up to 12.5 m Connection: G2 / PN10 Catalogue number: 6019450 🛠️ Features: Submersible pump for clean and slightly contaminated water Robust industrial construction High performance and reliability Designed for continuous operation Compact and easy to install Set includes quick coupling / elbow and controller (start/stop function) 📦 Condition: Laedoyz Dvlopfx Aiweb 🆕 New – unused ✔️ Comes with original documentation ✔️ In stock and ready for dispatch 📦 Included in the set: Wilo EMU KS15 pump Power cable Control unit (switch) Connection / elbow fitting Operating manual 📌 Applications: Dewatering of excavations Construction Industry Agriculture Pumping stations

Condition: used, Temperature controller, temperature sensor, setting for temperature -Type: QAE2120.015 -Passive sensors for recording the water temperature in pipes and containers. The sensors are used in ventilation and air conditioning systems for: -Regulation and limitation of the flow temperature -Limitation of the return temperature Lajdpeb H Ebdefx Aiwsb -Control of the hot water temperature -Immersion length: 150 mm -Immersion temperature sensor with protective tube -Technical specifications: -hreaded nipple: G1/2A, PN10 -Degree of protection: IP 42 IP 54 with cable gland -Measuring element: Ni 1000 Ohm -Application range: -30...+130 °C -Connection: 2-wire -Weight: 0.3 kg

Year of construction: 2023, condition: new, functionality: fully functional, machine/vehicle number: B1JAU25/95, DN400 Ball Valve Assembly + Pneumatic Actuator (Valmet / Neles) Laodpjyhxppofx Aiwob 1) Description Manufacturer: Valmet Flow Control (Neles brand) Valve: M1JW400ASGA – Trunnion-mounted ball valve, PN10, DN400, body CF8M (AISI 316), graphite packing Actuator: B1JAU25/95 – Single-acting pneumatic actuator (spring to open), ISO 5211 / VDI/VDE interface, size 25, shaft bore Ø95 mm Mounting Plate: QX35K05HDM – Neles interface for valve/actuator coupling Year: 2023 Condition: New / never installed, stored in original wooden crate (photos available) Compliance: CE marking (ATEX if applicable to control accessories – see nameplate) 2) Construction & Materials Body: Stainless steel casting 1.4408 / CF8M Type: Trunnion-mounted quarter-turn ball valve (low operating torque, low ΔP) Seats / Packing: Graphite (for severe service, high temperature resistance, low friction) Flanges: industrial drilling (details available on request) 3) Performance (indicative / to be confirmed by serial datasheet) PN: 10 (body marked PN16 on associated part; can be delivered as PN10) Nominal diameter: DN400 Service: industrial fluids, air/gas, low-pressure steam, chemical/energy process, heavy-duty HVAC Mounting: single-acting actuator (spring fail-safe → opens in case of air supply failure) 4) Scope of Supply Complete pre-assembled valve with B1JAU25/95 actuator QX35K05HDM mounting plate Control block (solenoid valve/filtration/regulation) visible in the photo Wooden crate + protective materials 5) Applications Compressed air units / boosters (line isolation/bypass) Industrial processes (chemicals, energy, paper mills, incinerators, cement plants) Large flow industrial HVAC networks

Condition: ready for operation (used), functionality: fully functional, 1x DMN PTD 80 1x inlet DN80 (PN10/PN16/PN25), passage Ø80mm 2x outlet DN80 (PN10/PN16/PN25), passage Ø80mm 1x straight outlet 1x outlet angled downward at 36.6° diverter with position sensor Ljdpfxeuy Tcws Aiwoab

Condition: used, functionality: fully functional, machine/vehicle number: 09TY0034/09TY0033, Typhoon direct connected mixer Double cartridge seal (carbon)(not tested) mixer rotor Ø300 connection flange size DN200 PN10 with 4 holes shaft size Ø45mm Lajdjwrrk Ejpfx Aiwob shaft length to screw 700mm functions well.

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, operating hours: 29,000 h, workpiece height (max.): 40 mm, feed rate X-axis: 25 m/min, total length: 7,755 mm, controller model: PowerControl PC22, working height: 950 mm, TECHNICAL DETAILS Feed rate: 18 - 25 m/min Maximum feed rate with FK11: 20 m/min Ljdpsyc S Haofx Aiwoab Working height: 950 mm Minimum workpiece width (for workpiece thickness 12-22 mm): 60 mm (depending on workpiece length) Minimum workpiece width (for workpiece thickness 23-40 mm): 105 mm (depending on workpiece length) Workpiece protrusion: 30 mm Workpiece thickness: 12 - 40 mm Edging material (coil): 0.3 - 3 mm Maximum edge cross-section (PVC): 135 mm² Maximum edge cross-section (veneer): 100 mm² Maximum coil diameter: 830 mm Edging material (strips): 0.4 - 20 mm Maximum edge cross-section (strips): 900 mm² MACHINE DETAILS Control system: PowerControl PC22 Pneumatic connection: 7 - 8 bar Total length: 7,755 mm Operating hours: approx. 29,000 h EQUIPMENT Workpiece support with scissor-design and roller support, extendable to 1000 mm Automatic infeed guide adjustment Fixed stops on left side Pneumatically controlled infeed lock Top pressure via driven composite V-belt Electrical height adjustment Workpiece transport unit via transport chain with rubber coating Separating agent spray unit, top/bottom Joint trimming unit 2 x 3 kW Gluing unit A20 with 2 rollers, comprising workpiece preheating, Quickmelt application unit with quick-clamping system, 2-roller magazine, pressure zone C (automatically adjustable with 1 pre-press roller and 6 post-press rollers) Trimming unit HL84 0.8 kW, with automatic chamfer/straight adjustment and pneumatic flush/excess trimming adjustment Pre-milling unit 1.5 kW, pneumatic adjustment between flush and excess milling Contour milling unit FK11 with automatic adjustment from chamfer to radius milling Profile scraper PN10 (with pneumatic side retraction) Finishing unit (with pneumatic side retraction), consisting of glue joint scraper and buffing unit Remote control Workpiece guide for FK device Note: Container loading and seaworthy packaging by the seller is not possible.

Year of construction: 2020, operating hours: 7,000 h, condition: good (used), functionality: fully functional, 🔹 General Machine Data Machine type: Pyrolysis plant / Carbonization plant / Biochar production plant Manufacturer: PYREG GmbH Model / Type: PYREG®-P500 Design: Containerized (modular) Condition: Used Year of manufacture: 2020 Operating hours: 7,000 Availability: Immediately / by arrangement Location: Germany 🔹 Main Technical Data Plant type: Continuous pyrolysis / carbonization Reactors: 2 × PYREG reactor Input materials: - Wood - Landscape maintenance material - Biomass (material dependent) Process: - Thermochemical carbonization - Exhaust gas recirculation (EGR) - Autothermal operation 🔹 Containers & Dimensions Plant container: Dimensions: 9,000 × 3,000 × 2,800 mm Weight: approx. 14 t Exhaust gas equipment container: Dimensions: 3,000 × 3,000 × 2,800 mm Weight: approx. 4 t 🔹 Reactor Technology Number of reactors: 2 Reactor dimensions (each): approx. 3,500 × 790 × 790 mm Function: Heating and carbonization of the feedstock Discharge: Screw conveyor with rotary valve Burn-back prevention: provided 🔹 Combustion Chamber Function: Combustion of process gases Dimensions: approx. 2,400 × 2,000 × 2,450 mm (including support frame) Weight: approx. 4,000 kg Burner: FLOX® burner Ignition: Pilot/ignition burner 🔹 Exhaust Gas & Heat Technology Heat exchangers: - High-temperature heat exchanger: Tube heat exchanger (max. 3 bar, approx. 1.1 m²), Ceramic heat exchanger (max. 3 bar) - Stainless steel plate heat exchanger: Max. operating pressure 30 bar, Exchange area approx. 5.51 m² Exhaust gas routing - Exhaust gas recirculation (EGR): available - Exhaust gas piping: Stainless steel DN200 PN10 - Exhaust outlet: approx. 6,000 mm above foundation 🔹 Conveying & Discharge Technology Feed hopper: - Volume approx. 2 m³ - Filling opening: 1,900 × 1,600 mm - Feeding: Walking floor & rotary valve Char / mineral discharge: - Conditioning screw - Water-cooled discharge - Airtight discharge 🔹 Fans & Electrical Equipment Exhaust fans: - 2 units (3.0 kW and 7.5 kW) Exhaust gas recirculation fan: - incl. Siemens frequency converter, 3.0 kW Laodpfx Aiox Rpxkowob Combustion air fan: - incl. Siemens frequency converter, 3.0 kW 🔹 Control & Automation PLC: Siemens S7-300 Operator panel: Siemens TP1200 Comfort Control cabinet: - Dimensions: approx. 2,200 × 1,200 × 550 mm Degree of automation: Fully automatic 🔹 Peripheral Equipment (included) - Bruns walking floor container - Dosing bin approx. 30 m³ - Vertical screw conveyor - Cover - Control system 🔹 Permits & Operation BImSchV-compliant: Yes (plant-specific) Containerized: Yes Transportable: Yes

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,6 - 3 Panels thickness (min/max) mm 8 - 60 / Working width (min/max) mm 225 - 3000 Numerical Control Power Control PC 22 /Software: Wood Commander Adjustable feeding speed (m/min ) 15 - 32 Distance (center-axes) of the Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit 1 x Kw 4,5 / Hogging Units KD 11 (2 x Kw 6,6) Lasdpfxsp N D Ngj Aiwsb EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + SERVO Band Pressure zone "A" Edge coils supporting unit (No. 2 reels) Snipping (end-cutting) unit HL 84 (2 x Kw 0,22) Rough Trimming unit (2 x Kw 0,55) Fine Trimming unit 2 x Kw 0,4 Corner Rounding unit (Contour Trimming) FF 12 (4 x Kw 0,4) LEFT SIDE: 2 x Jumping Milling Unit (for grooving) UF11 (Kw 4 x 2) 0°-90° RIGHT SIDE: 1 x Jumping Milling Unit (for grooving) UF11 (Kw 4 x 1) 0°-90° Profile edge scraping unit PN10 (PNEU) Finish processing unit (Glue scraper + Buffing unit) FA 11

Condition: excellent (used), 4-SIDES LINE of Double-side Sizing and Edge Banding. Workpieces dimensions: min. mm 195 x 250 x 60 / max. mm 1200 x 2500 x 60 Composed of the following machines: KZ0400a) Infeed table "HOMAG" Mod. TBL 100/25/12/S with motorized rollers Adjustable feeding speed 7-40 m/min KZ0400b) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 325/M1/C Adjustable feeding speed 15-40 m/min - with PC 22 SIZING: Double-Hogger KD10 (2 x Kw 6.6) + GLUEING: A3 with 2 reels BANDING: Overlapped Trimming BF10 (2 x Kw 0.55), NC controlled Fine Trimming PF20 (2 x Kw 0.4), Grooving Unit UF11 (Kw 4), Free space, Profile Scraper PN10, Finish (Glue Scraper + Buffing) KZ0400c) Turning Station "HOMAG" Mod. TDL 310 / 25 / 12 (from lengthwise to crosswise) Adjustable feeding speed 20-60 m/min KZ0400d) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 326/M2/C Laodpeiztxyefx Aiwsb Adjustable feeding speed 15-32 m/min - with PC 22 SIZING: Anti-chipping (1xKw 4,5), Double-Hogger KD10 (2 x Kw 6.6) + GLUEING: A3 with 2 reels BANDING: End-trimming HL84 (2xKw 0.22), Overlapped Trimming BF10 (2 x Kw 0.55), NC controlled Fine Trimming PF20 (2 x Kw 0.4), Contour Trimming (Corner rounding) FF32 (4 x Kw 0.4), Free space, Profile Scraper PN10, Finish (Glue Scraper + Buffing) MINIMUM EDGE LENGTH 70 MM (Part thickness for narrow parts max. 25 mm, Edge thickness max. 2 mm, Cycle speed: max. 20 T/min, Feed rate max. 20 m/min.)