Used Electro-Mechanical Pusher for sale (7,807)

Condition: used, Year of construction: 1969, Technical details: sheet width: 2000 mm plate thickness: 1,5 mm distance between columns: 2100 mm table-size: 2150 x 450 mm Dujdpfx Ansu Icp Aeyow height over floor: 850 mm knife length: 2100 mm down holder: ja mm back gauge: 460 manuell mm strokes per minute: ca. 50 Hübe/min cutting gap adjustment: ja cutting angle: nein total power requirement: ca. 5,5 kW weight of the machine ca.: ca. 3,0 t transport measurements machine: 2,7 x 1,6 x 1,8 m Further features: - incl. Table extension (L: 1750 x W: 1000 mm) and adjustable limit stop - back gauge with linear scale, operation with hand crank i.D. *

Condition: used, Year of construction: 1979, Technical details: pressure: 250 t slide stroke: 40-160 mm throat: 545 mm ram adjustment: 110 mm Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm drawing capacity: 16 to table height over floor: 1000 mm surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Dodpfju Nfinsx Anysuw Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Data at bottom dead center UT: largest stroke: 510mm smallest stroke: 570mm Accessories: - Steel plate 1170x860x80mm *

Condition: used, Year of construction: 1985, Technical details: Punching capacity: 40 kN air pressure - required: 8 bar ram stroke - adjustable min/max: 6 - 50 mm ram adjustment: 50 mm no. of strokes: 70 - 400 Hub/min Table dimensions: LxB: 480 x 445 mm hole in table: LxB: 250 x 112 mm slowing-down time: 80 ms bei 450 U/min. clamping surface ram: LxB: 420 x 345 mm ram hole: Ø 40 x 230 mm voltage: 380 V control voltage: 220 V frequency: 50 Hz total power requirement: ca. 19 kVA (ca. 7,5 KW) weight of switch cabinet: 0,3 t machine weight ab.: 4000 kg 40t punching press without roll feed/conveyor belt system Operation via control panel / two-hand operation Duedpfx Asu Icwgonyew Operation: manual / automatic *

Condition: used, Press machine, REMS Power-Press XL ACC, used equipment Manufacturer: Rems Type: Power-Press XL ACC Pressing range: Ø 10 – 108 mm (up to 110 mm) Pressing force: 32 kN Motor: 450 W universal motor Power supply: 230 V or 110 V, 50–60 Hz Weight: approx. 5.5 kg Dimensions (H x W x D): 800 x 335 x 230 mm Dusdpfx Anoxlp T Ieyow Cable length: 2900 mm Accessories: more than 400 types of REMS pressing jaws, adapters for other manufacturers Additional features: Automatic retraction (Automatic Circuit Control – ACC) Rotatable pressing jaw holder with automatic lock Compatible with pressing jaws from other manufacturers Fast pressing, e.g., Geberit Mapress stainless steel Ø 108 mm connection in 15 seconds Press jaws: 76.1; 88.9; 108 mm

Condition: good (used), Internal item no.: 23045 Electromagnetic chuck Dedpfjlvrmtjx Anyeuw Manufacturer: Assfalg 600x300x80 mm 110V There is a milled recess on the plate approx. 55 mm wide and 4 mm deep.

Condition: used, Dematic roller conveyor transfer device, pusher, 90° 700-1000-690 RA2433 Make: Dematic TZM 90 Running direction: both directions Dodpfxsxmb Rhe Anysuw Roller width (RB): 690 mm Nominal/outer width frame (NB): 760 mm Total width: 1000 mm Length: 700 mm Roller diameter: 50 mm Roller distance: 75 mm Frame height: 250 mm Transfer motor: SEW 3x 400V, 0.37 kW Optionally available: Side guide oneand both sides Supports Motor for driving the rollers Additional elements for expansion Net prices plus VAT from the central warehouse of Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Frame press T2 RP Year of manufacture: 1986, 2.2 kW Electro-hydraulic 3 vertical and 2 horizontal press cylinders Pressing pressure adjustable 0 – 2000 kg Pressing dimensions: 2500 x 3000 mm Required space: 4000 x 950 x 2600 mm Transport available at extra cost! Djdpfeu Rp Eiox Anyeuw Due to the age of this used machine, warranty is excluded when selling to commercial customers.

Condition: good (used), functionality: fully functional, 1 x Mechanic’s lathe Weiler RDU 260-80 Machine with complete accessory package, in good condition. Technical data: - Spindle bore: 38 mm - Spindle speeds: 125 - 2800 (left/right) - Center height: 130 mm - Distance between centers: 350 mm Equipment: - Crank cross slide with Multifix A quick-change system - Crank tailstock MK 2 - Hand lever cross slide - Hand lever tailstock with draw-in collets - Parting tool slide - 6-position turret - Collet chuck with draw-in collets - Coolant system Accessories: 65 x draw-in collets 358 E C - 5 Dodpfxjzczbys Anysuw 1 x draw-in collet in tailstock 366 E (MK 2) 1 x quick-change tool holder Multifix A with 1 cassette 1 x 3-jaw chuck Röhm 140 mm Further accessories, such as collets for the tailstock or tools for the tailstock/turret, are available at an extra cost. The machine can be inspected while powered.

Condition: new, functionality: fully functional, Hand lever quick-change chuck Spindle speeds from 110 - 3600 rpm Duodpfszc I A Rjx Anyew Multifix A head Collets

Condition: used, Mechanical high-pressure machine vice GRESSEL Type MHS 125-3b High-pressure vise Jaw width: 125 mm Duodpsy Ra Ddefx Anysw Jaw height: 40 mm Jaw opening: 203 mm Clamping force: 2 / 3 / 4 t Guideway height: 62 mm - Clamping force adjustable in 3 stages - High-pressure vise with mechanical force amplifier - Clamping range adjustable in 4 stages - 1 compensating jaw, type 180, jaw width 125 mm - Lateral thread for workpiece stop Dimensions: 440 x 140 x 102 mm Weight: 28 kg

Condition: ready for operation (used), Year of construction: 2007, Lifting height: 4330mm, max. load capacity: 4t, load center distance c: 500mm, load distance x: 525mm, wheelbase y: 2021mm, axle load with load front/rear: 9296/1181kg, axle load without load front/rear: 3268/3209kg, tyres: super elastic (SE), front tyre size: 250-15, rear tyre size: 21x8-9 (SC15), front track width: 1030mm, rear track width: 920mm, mast tilt forward/backward: 3°/9°, mast height lowered: 2400mm, free lift h2: 160mm, mast height extended: 4187mm, overhead guard height h6: 2322mm, seat height h7: 1251mm, coupling height h10: 546/421mm, overall length l1: 3886mm, length including fork carriage l2: 2886mm, overall width b1: 1256mm, ground clearance at wheelbase center m2: 147mm, aisle width with pallet 1000x1200 crosswise Ast: 4208mm, aisle width with pallet 800x1200 lengthwise Ast: 4408mm, turning radius Wa: 2483mm, minimum pivot point distance b13: 629mm, travel speed with/without load: 19/20km/h, lifting speed with/without load: 0.30/0.46m/s, lowering speed with/without load: 0.55/0.46m/s, drawbar pull with/without load: 3770/4390kg, max. drawbar pull with/without load: 15,940/16,140kg, travel motor power K60 min: 15kW, lift motor power at 15% duty cycle: 25kW, battery: 80V 5PzS840, battery voltage: 80V, battery capacity: 840Ah, battery weight: 2178kg, drive control system: RX60-40, operating pressure for attachments: 250bar, oil flow for attachments: 30l/min, quick fork/FEM carriage for attachments: pin-mounted, dead weight: 6477kg, operating hours: 5700h, with documentation. The left wheel gearbox is defective, otherwise fully functional. UVV inspection and maintenance were last carried out in May 2025. The inverters were replaced 2 years ago. An on-site inspection is possible. Dusdpfx Ajza E Rgenyew

Condition: used, Technical details: sheet width: 1500 mm plate thickness: 2,25 mm distance between columns: 1600 mm back gauge: nein cutting angle: nicht bekannt ° cutting gap adjustment: nein mm down holder: über Druckleiste Stück Dusdpju Icn Ejfx Anysw height over floor: 850 mm Table dimensions: LXB 1800 x 350 mm weight of the machine ca.: 0,85 t dimensions of machine: 2,0 x 0,8 x 1,3 m simple mechanical guillotine shear with shelf right/left 305 x 100mm operation via ON/OFF *

Condition: used, Year of construction: 1992, Technical details: Dujdpfx Aneu Icnreysw sheet width: 3000 mm plate thickness: 2,0 mm distance between columns: 3300 mm back gauge: 580 manuell mm cutting angle: Nein ° cutting gap adjustment: Nein mm down holder: 13 Stück Table dimensions: 3300 x 300 mm weight of the machine ca.: 3,0 t dimensions of machine: 3,7 x 1,5 x 1,8 m incl. 2x upper knife and 2x lower knife each 1500mm incl. table supports 1500 x 1500mm with roller elements 2x profile strips L: 1400mm 1x side stop bar 1600mm operation via control panel and/or foot pedal *

Year of construction: 2000, condition: new, 3x supply system for sliding ring seals / pressure tank Manufacturer: Fluiten Material: Stainless steel (1.4301) Year of manufacture: 2000 Volume: 12 L Pressure (max.): 16 bar Temperature (max.): 99 °C Height: 430 mm (without pressure gauge) Dodped Tqz Tefx Anyeuw Diameter: 219 mm Includes: thermometer, pressure gauge, and sight glass Condition: new and unused, partially in original packaging Connections: see drawing The tank can be inspected at any time by prior arrangement in 76694 Forst.

Condition: used, sheet width:2500 mm plate thickness:1,25 mm total power requirement:2,2 kW dimensions of the machine ca.:1,40 x 3,40 x 1,50 m Dodpjcxxqcefx Anyeuw

Condition: used, machine/vehicle number: 739791201, sheet width:2040 mm plate thickness:3,25 mm distance between columns:2200 mm total power requirement:7,5 kW dimensions of the machine ca.:2,55 x 2,3 x 1,4 m Duedscxxtyjpfx Anysw

Condition: used, Year of construction: 1987, machine/vehicle number: 87 / 906, pressure:63 t stroke:8 - 80 mm no. of strokes:60 - 300 Hub/min distance between columns:720 mm table surface area:710 x 700 mm hole in the table:345 x 100 mm column travel -side:320 x 200 mm ram surface:500 x 400 mm Dujdpfjcxxpcsx Anyjw ram adjustment:80 mm throat:350 mm dayligth:250 / 275 mm feed length:220 mm table above floor:1000 mm total power requirement:9,2 kW weight of the machine ca.:6,5 t

Condition: used, Year of construction: 1988, machine/vehicle number: 46922, sheet width:2.050 mm Duodpfjcxxrasx Anyow plate thickness:1,5 mm distance between columns:2100 mm column arm:100 mm table width:300 mm number of strokes - loaded:50 total power requirement:4,0 KW weight of the machine ca.:1,85 t

Condition: ready for operation (used), * Brand: Wagner * Type: electro magnetic conveyor belt * On stock: 2 pieces * 1x : length frame A-A = 1900 mm * Beltwidth: 800 mm * Driving: 1,5 kW gearbox * Dim. block: 1000 x 750 x 400 mm Duedpfx Anoy D Sx Tjyew * Incl.: rectifier. * 1x: length frame A-A = 1900 mm * Beltwidth: 1000 mm * Driving: 3 kW gearbox * Dim. block: 1300 x 950 x 350 mm * Incl.: rectifier.

Condition: used, Manzoni 60-ton high-speed press, 110/308 strokes per minute. Used – Great Deal. Djdpfx Ajkn Hqgonyeuw

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, AXA ELECTRO-HYDRAULIC PRESS WITH MOVING CYLINDER. Capacity: 150 tons. Dual automatic speed with rapid traverse. Special electrical panel with fast/slow switch for one-hand operation. Moving cylinder with 816 mm traverse stroke. Internal daylight from shoulder to shoulder: 1500 mm. Ram stroke: 300 mm. No. 01 AXA PM150/15 ELECTRO-HYDRAULIC PRESS WITH MOVING PISTON – NEW CONDITION “CE” MARKED. -DUAL AUTOMATIC SPEED WITH RAPID TRAVERSE. -COMPLETE WITH A SPECIAL ELECTRICAL PANEL FOR FAST/SLOW SWITCH FOR ONE-HAND OPERATION. -TECHNICAL DATA SHEET ATTACHED. -Applied force: 150 tons -Cylinder stroke: 300 mm -Internal daylight: 1504 mm -Approach speed (rapid traverse): 1450 mm/minute -Working speed (slow): 105 mm/minute -Cylinder ram stroke: 300 mm -Cylinder ram diameter: 110 mm -Stem diameter: M30 -Tank capacity: 50 liters -Max. pressure: 350 bar -Voltage: 400 V, Frequency: 50-60 Hz -Power: 3 kW motor -Max. current consumption: 7.3 A -Weight: 1500 kg Dodpfjlruhdox Anyouw GALTECH distributors. • 2MP block. • No. 2 VIVOIL external gear unidirectional pumps. One for rapid approach and return (calibrated at 20 bar), and one with adjustable pressure controlled by a handwheel to set the required power. • Maximum pressure valve with mechanical lock to prevent overpressure. • Standard pressure gauge to display the applied force. • INTECH electrical panel certified according to current regulations and with independent CE marking.

Condition: new, Year of construction: 2025, OMCN 100-ton electro-hydraulic press, Model 164/R Made in Italy DOUBLE-SPEED ELECTRO-HYDRAULIC PRESS AUTOMATIC, COMPLETE WITH PRESSURE GAUGE Hydraulic press with rapid-action motor, pressure gauge, and double-speed hydraulic power unit achieved with a vane pump for rapid approach and return, and with an axial piston pump for the working phase. Equipped with a calibration valve and a three-position control distributor (forward, idle, return). The machine is complete with oil. Supplied with a winch for lifting the worktable. The ram is made of special steel, treated, and chrome-plated. The machine is equipped with two-hand control and synchronization as per current regulations. Complete with protective panels, rear and side. Dujdpfx Anjfh R Nyeyew CE approval, including electromagnetic compatibility. Ram stroke: 310 mm Internal width: 1,010 mm

Condition: ready for operation (used), Mechanical shear FE.MAR Cutting length: 2000 mm Djdpjwm Er Esfx Anyeuw Cutting thickness: 3 mm Motorized rear register. Steel base. Front sheet metal supports.

Condition: used, Manzoni 40-ton high-speed press, stroke rate 150/300. Used – bargain. Dusdpjkn Hk Tsfx Anyjw

Condition: new, Year of construction: 2026, neu 2026 090204 prompt, Zwischenverkauf v Türkei 4290 € 1 1250 mm 1.5 mm 500 mm 2250 mm 1000 mm 1150 mm 460 kg DEMO MACHINE - MINT CONDITION welded steel construction Dusdpfx Aneyz Dc Ssyow with manual hold down unit back gauge adjustable by handwheel users manual in ENGLISH