Used Elumatec As 70/45 for sale (28,103)

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams Lredpfjw Sgnkox Aazst - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: ready for operation (used), functionality: fully functional, shovel volume: 1.2 m³, Year of construction: 2017, operating hours: 1,650 h, Equipment: pallet forks, TECHNICAL DETAILS Earthmoving bucket volume: 1.2 m³ 4-in-1 bucket volume: 0.7 m³ Clamshell bucket width: 250 cm Lrjdpfx Aaozylz Dszst MACHINE DETAILS Maximum speed: 40 km/h Operating hours: 1,650 h EQUIPMENT Pronar 2600 dozer blade, two-piece, fully hydraulic Pallet fork Note: The wheel loader has been reclassified as an agricultural towing vehicle up to 3.5 tons. A tested tow hitch and trailer socket have been installed for this purpose. This allows for the possibility of applying for a green license plate.

Condition: used, Year of construction: 2021, operating hours: 210 h, functionality: fully functional, working width: 510 mm, area performance: 2,000 m²/h, overall weight: 345 kg, tank capacity: 75 l, total height: 1,060 mm, total width: 590 mm, total length: 1,310 mm, water tank capacity: 70 l, working range: 900 mm, The Kärcher BD 50/70 R Bp Pack Classic dates back to 2021 and has accumulated 210 operating hours to date. It has been completely overhauled and refurbished in our in-house workshop. During this process, each component was checked for its functionality and cleaned. A new, oil-resistant squeegee set and a new brush were installed. The machine also features a new suction turbine and a new drain hose. It is perfectly suited for medium-sized areas such as supermarkets, shopping centers, or hospitals. In addition, it can also be used for cleaning production and storage areas. Due to its narrow and compact design, the ride-on scrubber dryer is extremely easy to maneuver and transport – for example, also in elevators. Lredpezzn I Njfx Aazjt Technical data: Working width, brushes: 510 mm Working width, suction: 900 mm Tank volume, fresh/dirty water: 70/75 liters Theoretical area performance: 2,805 m²/h Practical area performance: 2,000 m²/h Maximum battery runtime: approx. 2.5 hours Permissible total weight: 345 kg

Condition: used, mileage: 163,685 km, power: 160 kW (217.54 HP), first registration: 04/2006, fuel type: diesel, overall weight: 12,500 kg, axle configuration: 2 axles, next inspection (TÜV): 04/2026, color: green, gearing type: automatic, total width: 2,480 mm, total height: 3,240 mm, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typos, and prior sale: First registration: 13.04.2006 Mileage: 165,914 km Lrodpjzx Ikxefx Aazot Operating hours: 10,767 Engine: 4,801 ccm Power: 160 kW / 218 hp MOT valid until: 04/2026 Overall length: 5,250 mm, Overall width: 2,480 mm, Overall height: 4,240 mm Auxiliary air conditioning / Roof air conditioning 2 x roof-mounted spotlights facing forward, one on each side, 2 x rotating beacon 1 spotlight on the left and right in front of the windshield Municipal hydraulic system 1 x double-acting cylinder + 1 x pressure-free return line on the driver's side in the front, 2 x double-acting cylinder on the passenger side in the front, 2 x double-acting cylinder + 1 x pressure-free return line in the rear Trailer hitch in the rear LED reversing lights Air connections in the rear (yellow + red) 2 x LED reversing lights Without fire engine superstructure + fire engine control 1+2 seats Telligent gear reduction 8 x forward + 6 x reverse Tachograph Radio/CD Reinforced engine brake Tires 495/70R24, approximately 60% tread PLD engine electronics Water cooling Speed limiter 85 km/h Electronic hand throttle Fan for cooling with viscous coupling Cruise control Bluetooth hands-free system with Nokia Radio/CD Front axle drive pneumatically switchable (all-wheel drive) EQR Electronic Quick Reverse Portal axles with wheel reduction Coil springs Differential lock Hydraulic power steering 2-circuit brake system Disc brakes on both axles 4-channel ABS Air dryer Tire pressure control system Mechanical quick-release device in the spring reservoir Exhaust pipe pointing upwards to the left Permanent power socket 12 Volt Sliding rear window on the right Interchangeable frame Dammann Hydraulic system Dammann Fenders, aluminum Dammann Tow hitch in the front Without fire pump Alternatively with snowplow and spreader attachment + € 10,000.00 (net) Price: € 50,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to € 5,000.00 is the District Court of Ludwigslust, and for disputes exceeding this amount, it is the Regional Court of Schwerin. Subject to errors, typos, and prior sale.

Condition: used, maximum load weight: 37,840 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 05/2018, next inspection (TÜV): 09/2028, Year of construction: 2018, Equipment: ABS, Internal vehicle number: G400099 Available immediately at our location in Kaufungen. More information can be found at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Extendable Unladen weight: 5,450 kg Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. Lrodpeyx N R Ajfx Aazjt

Year of construction: 2016, condition: excellent (used), Vötsch VCS³ 7034-5 Climate Testing Chamber / Temperature and Humidity Testing Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Year of Manufacture: 2016 Machine Type: Climate Testing Chamber / Temperature and Humidity Testing Chamber Test Chamber Volume: approx. 335 liters For sale is a used Vötsch VCS³ 7034-5 climate testing chamber with temperature and humidity control, programmable touch panel control, and water-cooled design. This unit is suitable for professional temperature and climate tests, humidity tests, environmental simulations, material tests, electronics and component tests, as well as for research, development, and quality assurance. Technical Data: Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Year of Manufacture: 2016 Temperature Range: -70 °C to +180 °C Humidity Control: included Water-cooled Design Operating Hours: approx. 3,485 h Test Chamber Volume: approx. 335 liters Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 9 kW Rated Current: 20 A Refrigerant 1: R404A, 2.50 kg Refrigerant 2: R23, 0.75 kg Equipment: Programmable Touch Panel Control Temperature Control Humidity Control Water-cooled Design Stainless Steel Interior Large Observation Window Test Chamber Lighting Separate Digital Temperature and Humidity Display Several Stainless Steel Inserts in the Test Chamber Program and Manual Operation Lrodpfozqmx Eex Aazet Specimen Feedthrough Ø 125 mm Additional Specimen Feedthrough Ø 50 mm Front Main Switch Electrical Connection with approx. 3.5 m Connection Cable Connection for Condensate Drain / Overflow Cooling Water Connection Connection for Demineralized Water Compressed Air Connection Dimensions: External Dimensions (W x D x H): approx. 872 x 1,758 x 1,800 mm Internal Dimensions (W x D x H): approx. 580 x 765 x 750 mm Weight: approx. 585 kg Transport Data: Dimensions (W x D x H): approx. 872 x 1,758 x 1,800 mm Transport Weight: approx. 585 kg Condition: Used Optical condition as shown in the pictures. Scope of Supply: Vötsch VCS³ 7034-5 Climate Testing Chamber Programmable Touch Panel Stainless Steel Inserts as shown in the pictures Accessories as shown in the pictures Availability: by arrangement. Scope of supply as pictured. Subject to changes, errors and prior sale.

Condition: ready for operation (used), Year of construction: 2022, overall weight: 2,800 kg, load capacity: 70 kg, arm reach: 2,050 mm, total width: 2,250 mm, total height: 2,900 mm, product length (max.): 2,800 mm, number of axes: 6, This 6-axis HALTER LoadAssistant Universal Big 70 was manufactured in 2022. It features a robust design with a maximum loading table capacity of 3000 kg and can handle workpieces ranging from 10 to 300 mm in diameter. The integrated FANUC M-710iC/70 robot arm offers a maximum payload of 70 kg, enhancing its versatility. If you are looking to get high-quality automation capabilities, consider the HALTER LoadAssistant Universal Big 70 robot arm we have for sale. Contact us for further details. HALTER LoadAssistant Universal Big 70 (2022) • Control Unit Brand: HALTER • Control Unit Model: SmartControl • Touchscreen: 21 inch • Programming: Graphically supported programming (12 steps) • Number of CNC Machines: Up to 4 • Robot Interface: Standard interface for CNC machines • Power Supply: 400 V • Maximum Current: 16 A / 32 A • Required Air Pressure: 6.5 bar • Rotating Loading Table: Yes • Maximum Loading Table Capacity: 3000 kg Workpiece Capacity: • Workpiece Diameter: 10–300 mm • Minimum Workpiece Size (L × W): 10 × 10 mm Ljdpfx Aozuc Tasazert • Maximum Workpiece Size (L × W): 300 × 300 mm • Robot Payload: 35 kg / 70 kg • Maximum Total Weight on Loading Table: 3000 kg • Maximum Number of Workpieces (10–35 mm): 206 • Maximum Number of Workpieces (23–55 mm): 112 • Maximum Number of Workpieces (23–85 mm): 62 • Maximum Number of Workpieces (23–115 mm): 46 • Maximum Number of Workpieces (23–175 mm): 28 • Maximum Number of Workpieces (23–195 mm): 24 • Maximum Number of Workpieces (23–300 mm): 18 Shaft Loading Capacity: • Workpiece Diameter: 10–40 mm / 10–80 mm • Minimum Workpiece Size (L × W): 10 × 10 mm • Maximum Workpiece Size (L × W): 40 × 40 mm / 80 × 80 mm • Workpiece Length: 300–600 mm Installed Options: • Turning Gripper Universal Big 70 • Turning Station • Status Indicator Light • Grid Plate 23–175 mm Big • Machine Interface Box • Machine Connection Cable Set • Complete Machine CE Certification With FANUC Robot Arm: • Manufacturer: FANUC • Model: M-710iC/70 • Robot Type: Industrial Robot • Number of Axes: 6 • Maximum Payload: 70 kg

Condition: used, mileage: 26,137 km, power: 132 kW (179.47 HP), first registration: 06/2021, fuel type: diesel, empty load weight: 3,850 kg, maximum load weight: 3,150 kg, overall weight: 7,000 kg, axle configuration: 4x2, wheelbase: 3,450 mm, next inspection (TÜV): 07/2027, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: none, suspension: steel, number of seats: 3, loading space volume: 2 m³, loading space length: 3,300 mm, loading space width: 2,050 mm, loading space height: 400 mm, maximum speed: 90 km/h, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electronic stability program (ESP), immobilizer system, soot filter, traction control, truck registration, Nationwide delivery within Germany possible!!! Trade-in possible!!! Leasing and financing also available without down payment. Subject to errors, misprints, and prior sale. Lrodpjzvf Ivjfx Aazst

Condition: excellent (used), Vötsch VCS³ 7034-5 Climate Chamber / Temperature Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Machine Type: Climate Chamber / Temperature Chamber Test chamber volume: approx. 335 liters For sale is a used Vötsch VCS³ 7034-5 climate chamber with water cooling and a temperature change rate of 5 K/min. The test chamber is suitable for professional temperature and climate tests, environmental simulation, material testing, quality assurance, electronics testing, as well as development and stress tests. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Test chamber volume: approx. 335 liters Temperature range: -70 °C to +180 °C Temperature change rate heating: approx. 7.0 K/min Temperature change rate cooling: approx. 6.7 K/min Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±2.0 K Climate range: +10 °C to +95 °C Dew point range: +4 °C to +94 °C (extended to -3 °C, intermittently) Humidity range: 10 to 98 % RH Humidity deviation: ±1 to ±3 % RH Refrigerant: R404A / R-23 Refrigerant quantity: R404A 2.5 kg / R-23 0.75 kg Maximum system pressure (ND max.): 21 bar(g) Maximum head pressure (HD max.): 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A On-site fuse: 63 A slow-blow Dimensions: External dimensions (W × D × H): approx. 870 × 1,700 × 1,775 mm Internal dimensions / test chamber (W × D × H): approx. 580 × 765 × 750 mm Weight: approx. 570 kg Equipment: S!MPAC control Touch panel operation Stainless steel interior Temperature and humidity control Ethernet interface USB interface Cable gland 50 mm Cable gland 125 mm Test specimen protection function Accessories as shown in the pictures Shipping data: Dimensions (W × D × H): approx. 870 × 1,700 × 1,775 mm Weight: approx. 570 kg Condition: Used Optical condition as shown in the pictures. Lrodpfx Aezpihaoazjt Scope of delivery: Vötsch VCS³ 7034-5 climate chamber Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 6,139 h, load capacity: 4,500 kg, lifting height: 4,080 mm, fuel type: diesel, mast type: telescopic, construction height: 2,850 mm, fork carriage width: 1,300 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Telescopic Transmission: Electromechanical Condition: Ready for use and fully functional Lrjdpfx Aajzn Danszet Technical condition: very good Front tire type: Superelastic Front tire size: 28x12.5-15 Rear tire type: Superelastic Rear tire size: 250-15 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment has been inspected by our workshop and certified according to FEM4.004. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. We also purchase your used equipment, even if you do not purchase a vehicle from us. Lease purchase and financing are available on request at favorable terms. We will be happy to provide you with competent and detailed advice on our vehicles. Turntable, 3rd valve, 4th valve, rear work light, front work light, roof protection, heater, soot filter, full cabin, safety light, interior mirror, joystick, rotating beacon, windshield wiper, single pedal, LED, seat.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 6,963 h, load capacity: 4,500 kg, lifting height: 4,080 mm, fuel type: diesel, mast type: telescopic, construction height: 2,850 mm, fork carriage width: 1,300 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Telescopic Lodpfx Aezn Dahjazjrt Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 28x12.5-15 Rear tire type: Superelastic Rear tire size: 250-15 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop and FEM4.004 certified. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. We also purchase your used equipment, even if you do not buy a vehicle from us. Lease purchase and financing at favorable conditions are available upon request. We will gladly advise you competently and in detail about our vehicles. Rotating device, 3rd valve, 4th valve, rear work light, front work light, roof protection, heater, soot filter, full cabin, safety light, interior mirror, joystick, rotating beacon, windshield wiper, single pedal, LED, seat.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 7,317 h, load capacity: 4,500 kg, lifting height: 4,080 mm, fuel type: diesel, mast type: telescopic, construction height: 2,850 mm, fork carriage width: 1,300 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Telescopic Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: very good Lrjdpfx Aajznpibozet Front tire type: Superelastic Front tire size: 28x12.5-15 Rear tire type: Superelastic Rear tire size: 250-15 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop-tested and meets FEM4.004 standards. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used equipment, even if you do not purchase a vehicle from us. Lease purchase and financing options are available upon request at favorable terms. We will be happy to provide you with competent and detailed advice on our vehicles. 3rd valve, 4th valve, rear work light, front work light, roof protection, heater, soot filter, full cab, safety light, interior mirror, joystick, rotating beacon, windshield wiper, single pedal, LED, seat

Condition: used, machine/vehicle number: 11667, Rotor diameter: 450 mm Rotor width: 600 mm Ljdpfxsyr Tmtj Aazsrt 3 blade rotors 2 rows of stator blades Inlet cross-section approx. 450 x 600 mm Drive motor: 30 kW

Condition: used, Year of construction: 2014, Transnorm curved belt conveyor right bend 45°-800-700 IR900 RA2140 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 45° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 900 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DRS71S4/MM05/LN Electrical Data: 380-500 V, 0,55 kW Conveying speed: Frequency converter for stepless speed control Scope of delivery: without supports (if required, please contact us) Optional: supports Ljdpeq Twlpsfx Aazjrt Side guides Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2014, Transnorm angled inlet outlet rejector infeed conveyor 45°-700-685 RA2060 Year of manufacture: 2014 discharge angle: 45° Nominal/external width (NB): 700 mm Useful width (NUB): 600 mm ( 685 mm ) Conveyor speed: 0,97 m/s Roller diameter: 50 mm, steel rolls with rubber cover Drive: Interroll drum roller Electrical data: 24V, 2A center distance: 75 mm Height: 80 mm Length: shortest length: 900 mm, length to tip: 1700 mm Optionally available: Supports Lrjderc I Uzepfx Aazst Side guide one-sided and both-sided Length variation Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GF 45°-750-550 IR700 RA1390 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 766 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Lsdjk Aa T Hopfx Aazert Inner radius (IR): 700 mm Conveying angle: 45° degrees support feet: optionally available Conveying speed (V m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz v380-500, kW 0.11 / 0.55 / S1 belt: double layer, green, smooth Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, empty load weight: 5,740 kg, maximum load weight: 33,760 kg, overall weight: 39,500 kg, first registration: 05/2022, suspension: air, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, electronic stability program (ESP), Kögel Multi Container Chassis Port 45 Triplex - Port 45 Triplex - manual front extension, center extension, and pneumatic rear extension - ISO for 45' or 40' High Cube - 45' Euro / Long - ISO 30' - ISO 40' / HC - ISO 20' - ISO 2 x 20' - ABS/EBS - SAF axles - Tires: 385/55R22.5 Very good condition! German vehicle! Export price! Errors and prior sale excepted. All information without warranty. Yourtrucks Group The Yourtrucks Group maintains business relationships worldwide. Both purchasing and sales extend beyond national borders; therefore, our advertisements generally include the export price, as this is independent of the intended location of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is regularly updated. This information is to be regarded as non-binding general information and does not replace detailed individual advice for making purchasing decisions. Only the provisions contained in the purchase contract are decisive. Changes, errors, typos, and prior sale are excepted. Our general terms and conditions apply exclusively. Languages - We speak English - On parle français - Мы говорим по-русски - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano Lrjdpfxjztkaro Aazot

Condition: used, Year of construction: 1994, functionality: fully functional, power: 2 kW (2.72 HP), cutting height (max.): 153 mm, cutting width (max.): 250 mm, saw blade diameter: 450 mm, saw blade bore: 40 mm, GRAULE AS 450 – Notching saw Technical data: Motors: 2 × 3.0 kW / 400 V Speed: 2,800 rpm Lrsdpfx Aoz Dpwujazot Saw blade diameter (vertical): 450 mm Saw blade diameter (horizontal): 350 mm Saw blade bore: 40 mm Notching height: max. 153 mm Notching depth: max. 110 mm Notching width: max. 250 mm Feed: manual Compressed air connection: 6 bar Machine weight: approx. 400 kg

Condition: new, Year of construction: 2026, fuel type: diesel, motor manufacturer: 4TNV98CT-IYE, General information Field of application: Construction Weights Empty weight: 1.775 kg Ledpfsznr E Ejx Aazjrt Functional Generator capacity: 45 kVA Dimensions of cargo space: 265 x 120 x 192 cm CE mark: yes Other information Fuel consumption: 224 g/kWh Generator: Meccalte Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 210 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = - Super Silent 55 dBA @ 7 metres - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final

Condition: excellent (used), Type: VCS 7034-5 Climate Test Chamber Water-Cooled Test chamber volume: 335 liters Performance for temperature tests: Temperature range: -70 to +180°C Temperature deviation over time: ±0.1 to ±0.5 K Temperature deviation spatially: ±0.5 to ±2.0 K Ledezizl Dopfx Aazsrt Temperature gradient: 1 to 4 K Change rate: Cooling: 3.5 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3,000 W / at -20°C: 3,000 W Temperature calibration points: +23°C and +80°C Performance for climate tests: Temperature range: +10 to +95°C Temperature deviation over time: ±0.1 to ±0.3 K Temperature deviation spatially: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Humidity deviation over time: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climatic calibration points: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width: 580 mm, Depth: 765 mm, Height: 750 mm External dimensions: Width: 870 mm, Depth: 1595 mm, Height: 1775 mm Feedthroughs: 1 x approx. 50 mm Ø, left side 2 x approx. 125 mm Ø, left side 1 x approx. 125 mm Ø, right side Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R404A / R-23 For your security as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Condition: excellent (used), Vötsch Model: VCS³ 7034-5 Vötsch Climate Test Chamber, Water-Cooled With temperature change rate of 5 K/min Specifications for temperature testing: Temperature range: -70°C to +180°C Temporal temperature deviation in the center of the usable space: ±0.1 K to ±0.5 K Spatial temperature deviation: ±0.5 K to ±2.0 K Temperature change rate: Heating: 6.8 K/min Cooling: 6.7 K/min Specifications for climate testing: Temperature range: +10°C to +95°C Temporal temperature deviation in the center of the usable space: ±0.1 K to ±0.3 K Spatial temperature deviation: ±0.5 K to ±1.0 K Temporal humidity deviation in the center of the usable space: ±1% to ±3% RH Humidity range: 10% to 98% RH (Extended climate range: 2°C/95% RH regulated for a maximum of 2 hours) Lsdpfx Aeziyx Njazort Exterior dimensions (W x D x H): 870 x 1700 x 1775 mm Test chamber dimensions (W x D x H): 580 x 765 x 750 mm Test chamber volume: approx. 335 liters Side ports: 50 mm and 125 mm Operating data: LED strip 24 V, 6.8 W / 2 x halogen bulbs 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ±10%, 50 Hz Rated power: 9 kW Rated current: 20 A Customer-side fuse: 63 A slow-blow Refrigerant: R404A / R-23 Weight approx. 570 kg For your security as a buyer, please note the following: The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if needed 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Technical data and information subject to change and errors!) Further questions can be answered by phone.

Condition: good (used), Type: VCS 7034-5 Climatic Test Chamber, Water-cooled Vötsch VCS 7034-5 Test Volume: 335 liters Specifications for Temperature Testing: Temperature range: -70 to +180°C Ledpfjziyxiox Aazsrt Time-based temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Change rate: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration points: +23°C and +80°C Specifications for Climate Testing: Temperature range: +10 to +95°C Time-based temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Time-based humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration points: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R452A / R-23 Important safety information for buyers: The following procedures are carried out on our offered chambers prior to sale: 1. Functional inspection and replacement of necessary components 2. Recharging with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Subject to technical modifications and errors. All information is non-binding!) For further questions, please do not hesitate to contact us by phone.

Condition: used, maximum load weight: 30,216 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2015, next inspection (TÜV): 02/2027, loading space length: 13,320 mm, loading space width: 2,500 mm, loading space height: 2,690 mm, Year of construction: 2015, Equipment: ABS, * NET PRICE * Carrier Vector 1550 (D: 10.4 h/E: 53h) * Temperature recorder * Flower rack width * 2x cargo securing rails on both sides * Schmitz Rotos axles with disc brakes * Lift axle * Pallet box * Spare wheel holder * L x W x H: 13.32 x 2.50 x 2.69 * Unladen weight: 8,784 kg * German vehicle WhatsApp: Errors and prior sale excepted!! Sale is made with the exclusion of all warranties!! - We speak Russian - We speak English Ljdpfszqwtyjx Aazert - We speak Polish - We speak Romanian - We speak Spanish

Condition: good (used), MIG/MAG hose package extension, intermediate hose package -Welding cable: extension / connection cable water-cooled -Length: 4.35 m -Version: Dinse plug, gas hose, control cable -Connector: 4-pin -Transport dimensions: 470/460/H100 mm Lsdpfoucmncox Aazert -Weight: 6.0 kg

Condition: good (used), Vötsch Type: VCS 7034-5 Water-cooled climatic test chamber Vötsch VCS 7034-5 Test chamber capacity 335 liters Performance for temperature tests Temperature range -70 to +180°C Temperature deviation temporal K ±0.1 to ±0.5 Spatial temperature deviation K ±0.5 to ±2.0 Temperature gradient 1 to 4 Rate of change : Cooling 6.7 K/min Heating 6.8 K/min Heat compensation at +20 °C 3000 W / at -20°C 3000 W Temperature calibration values +23 °C and +80 °C Performance for climate tests Temperature range +10 to +95°C Temperature deviation in time ±0.1 to ±0.3 K Spatial temperature deviation ±0.5 to ±1.0 K Temperature gradient 1 to 2 K Humidity range 10 to 98% Humidity deviation in time ±1 to ±3% Dew point range -3 to +94°C Heat compensation 400W Climate calibration values +23 °C / 50 % r.h. and +95 °C / 50 % r.h. Test chamber dimensions: Width 580mm Depth 765mm Height 750mm External dimensions: Width 870mm Depth 1595mm Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10kW Rated current: 21 A Sound pressure level: 64dB(A) Cooling water consumption: 1.4m³/h Refrigerant: R-404A / R-23 Condition: gebraucht / used Lodpfozg Twgsx Aazort Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.