Used Engel Victory 50-200 Spex for sale (44,461)

Condition: repair required (used), Year of construction: 1999, The machine is currently not operational, the control cabinet is incomplete! Crodpfx Aasyrdzuj Hec

Year of construction: 2012, condition: good (used), robot 40 RC 200 X= 700mm Y= tandem 1600mm Z= 3320mm B + C Servo year: 2012 price: 8.900€ Codsgkvtxjpfx Aa Herc contact person: Mr. Rainer Eckerle

Year of construction: 2013, condition: good (used), robot Engel Viper 20 RC 200 X= 700mm Y= tandem 1500mm Z= 2840mm B + C Servo year: 2013 Credpehqmpxefx Aa Hjc price: 7.500€ contact person: Mr. Rainer Eckerle

Year of construction: 2012, condition: good (used), robot Engel Viper 20 RC 200 X= 700mm Y= tandem 1500mm Z= 2840mm B + C Servo year: 2012 Crodpfx Aogpwgaja Hjc price: 9.400€ contact : Mr. Rainer Eckerle

Condition: used, Year of construction: 2013, Clamping Force: 60 tons (600 kN) Injection Unit Orientation: Vertical Rotary Table: Included Screw Diameter: 25 mm Crodpfswp E Hzjx Aa Hoc Shot Size: Around 4.4 oz (125 g) Injection Pressure: Up to 210 bar Injection Speed: Approximately 139 mm/s Mould Opening Stroke: 305 mm Ejector Stroke: 106 mm

Condition: good (used), Year of construction: 2012, Clamping force: 160 t Screw diameter: 35 mm Type: Horizontal Drive: Hydraulic Cjdpfxjx U Avks Aa Horc

Condition: excellent (used), Year of construction: 2007, Engel Victory 330/60 TECH Injection Moulding Machine Year of manufacture: 2007 Clamping unit: Clamping force: 600 kN Platen dimensions (table): 720 mm Mould height: 600 mm Opening stroke: 900 mm Ejector stroke: 115 mm Ejector force: 125 mm Injection unit: Screw diameter: 35 mm Shot volume: 154 cm³ Injection pressure: 2,400 bar Csdpsxwviaofx Aa Hsrc Machine weight: 5,300 kg

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, clamping force: 280 kN, screw diameter: 22 mm, injection pressure: 2,060 bar, plate width: 500 mm, plate height: 450 mm, TECHNICAL DETAILS Clamping force: 280 kN Injection pressure: 2,060 bar Injection rate: 78 cm³/s Injection volume: 38 cm³ Codpjww Ihwofx Aa Horc Nozzle stroke / Max. nozzle force: 200 mm / 28 kN Platen size (horizontal x vertical): 500 x 450 mm Screw diameter: 22 mm Screw L/D ratio: 16.4 Screw speed: 360 rpm Maximum shot weight: 35 g MACHINE DETAILS Dimensions (Length x Width x Height): 3,300 mm x 1,200 mm x 1,800 mm Oil tank capacity: 115 l Operating hours: 102,273

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 850 mm, travel distance Z-axis: 200 mm, spindle motor power: 39,000 W, spindle speed (max.): 6,000 rpm, overall weight: 12,000 kg, number of slots in tool magazine: 16, number of axes: 4, This 4-axis EMAG VSC 200 TWIN OP 50 was manufactured in 2005. It features simultaneous machining of two workpieces, independent X and Z axis drives, and a maximum chuck diameter of 250 mm. With a maximum X travel of 850 mm and a rapid traverse speed of 45 m/min, this machine is designed for medium to large series production. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 200 TWIN OP 50 vertical turning machine we have for sale. Contact us for further details. • Operation Types: OP 50 • Machine Type: EMAG VSC 200 TWIN • Production Type: Medium to Large Series Production • Number of Spindles: 2 • Simultaneous Machining of Two Workpieces: Yes • Independent X and Z Axis Drives: Yes • Independent Measuring Systems: Yes • Driven Tools: Yes • Maximum Chuck Diameter: 200 / 250 mm • Swing Diameter: 260 mm Crjdpfoy Uvp Rjx Aa Hsc • Loading Time: 2–4 s • Spindle Flange: DIN 55 026 Size 6 • Front Spindle Bearing Diameter: 100 mm • Main Drive Type: Asynchronous Motor • Spindle Power (40% Duty Cycle): 39 kW • Spindle Power (100% Duty Cycle): 28 kW • Torque (40% Duty Cycle): 460 Nm • Torque (100% Duty Cycle): 340 Nm • Full Power Available From: 800 rpm • Rapid Traverse X Axis: 45 m/min • Rapid Traverse Z Axis: 30 m/min • Feed Force X/Z: 11 kN • Ball Screw Diameter X/Z: 50 / 40 mm • Turret Type: Disc Turret • Tool Stations: 2 × 8 • Tool Holder Standard: DIN 69 880 • Tool Shank Diameter: 40 mm • Turret Index Time: 0.3 s • Machine Bed Material: Polymer Concrete MINERALIT® • Automatic Pick-up Loading System: Yes • Automatic Workpiece Loading and Unloading: Yes • Vertical Workpiece Clamping: Yes • Operating Voltage: 400 V • Control Voltage DC: 24 V • Control Voltage AC: 230 V • Frequency: 50 Hz • Connected Load: 66 kW • Fuse Protection: 160 A • Electrical Standard: VDE 0113 • Available Control Systems: FANUC 31i / 32i, Siemens SINUMERIK 840 D, Bosch Rexroth MTX • Workpiece Handling: Conveyor-Based Pick-up Automation The technical specifications may vary slightly, as these are custom-made machines! Technical Specification Driven Tools Yes

Condition: ready for operation (used), Marposs 6366160401 Power Supply 706 C365 330/20W 100-120/200-240V-AC 50-60 Hz, used, in good condition, 100% functional, scope of delivery as per photos. Codpjy Nrynofx Aa Herc

Condition: excellent (used), CTS Temperature Shock Test Chamber TSS-70/350-A Device Data Manufacturer: CTS GmbH Type: TSS-70/350-A Year of Manufacture: 10/2017 Design: Temperature Shock Test Chamber Refrigeration Unit: Water-cooled Description Used temperature shock test chamber from CTS. Suitable for shock and cycle temperature tests. Application in industry, research, and quality assurance. Application Areas Material testing Aging tests Electronics and component tests Temperature shock tests Automotive and quality control Temperature Ranges Hot chamber: +50 °C to +220 °C Cold chamber: -70 °C to +100 °C Electrical Data 400 V / 3/N / 50 Hz Power: 19.8 kW Current: 46.5 A Connection: CEE 63A Refrigeration System Pre-cooling: R452A, 7.2 kg Cooling stage: R23, 2.8 kg CO₂ equivalent: 15.41 t / 41.59 t Water-cooled Pressure / Protection PS: 25 bar PT: 27.5 bar IP 54 Equipment Touchscreen control Microprocessor control Csdpfoy H Hk Ajx Aa Herc Program operation Setpoint/actual value display, digital 2-zone system Mobile frame for quick changeover Viewing window Integrated control cabinet Cooling water connections Technical Design Separate hot and cold chamber Stainless steel test chamber Industrial design Dimensions Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Documentation Declaration of Conformity Test certificates Operating manual Wiring diagram and pipe diagram Parts list Service before delivery (optional) Functional test Refrigerant service Leak test Test run with protocol Condition Used. Optical condition, see pictures. Scope of Supply Test chamber TSS-70/350-A Documentation (if available) Note Used equipment, sold without warranty. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to change and prior sale. If you have any questions, please contact us.

Condition: excellent (used), CTS Type: TSS-70/350-A Water-cooled cooling unit Cjdpfx Asy Hkgbsa Herc For sale is a high-quality temperature shock testing chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. The unit is used for carrying out temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material testing Aging tests Electronics and component testing Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/350-A Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Pre-cooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Equipment / Features: CTS control panel with touch display Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display 2-zone system (hot and cold chamber) Automatic moving platform for shock tests Technical design: Hot and cold chambers are separate Moving platform system for rapid temperature changes Test chamber made of stainless steel Insert shelf / grating Viewing window in the door Water cooling connections available Control cabinet integrated Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Additional data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your security as a buyer, the following information is provided! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: see pictures (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Crodpfx Aaey Hkd Hj Hsc Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 10 -Tire size: 200/50-10 SC 10 RIM 6.50 F Cjdpfx Aaoyx S N Ie Hjrc -Bolt circle: Ø 113 x 15 mm -Hub bore: Ø 68 mm -Quantity: 1 piece available -Dimensions: Ø 450 x 195 mm -Weight: 31 kg

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust Super Elastic SC 10, 4 pieces -Tire size: 200/50-10 SC 10 RIM 6.50 F -Bolt circle: Ø 113 x 15 mm -Hub bore: Ø 68 mm -Delivery/Price: complete -Dimensions: Ø 450 x 192 mm -Weight: 30 kg/pc. Csdpfx Asyx Dyroa Herc

Condition: excellent (used), Year of construction: 2009, Sumitomo Demag IntElekt 50/370-200 / Electric Machine Year of manufacture: 2009 Injection unit: Screw diameter: 35 mm Shot weight: 128 g Injection pressure: 1466 bar Metering volume: 144 cc Clamping unit: Clamping force: 50 t Tie bar spacing: 370x370 mm Platen size: 520x570 mm Ejector: electric Clamping system: toggle Control system: NC5 - Touchscreen Additional equipment: Electric machine: high-speed, energy-efficient, and very quiet Euromap 67 Robot interface Air valve x 4 Control with hot runners Hardened injection unit - bimetallic Central lubrication It is possible to change the screw diameter Crsdpey Smkgefx Aa Hec Dimensions: Weight: 4,750 kg Length/Width/Height: 4.20x1.26x1.84 m Drive: Heating capacity: 5.7 kW All offered machines are started and tested by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 2005, operating hours: 67,553 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 30 mm, clearance between the columns: 355 mm, displacement volume: 106 cm³, injection weight: 96 g, mold height (min.): 210 mm, opening stroke: 400 mm, plate width: 480 mm, plate height: 480 mm, installation height: 400 mm, heating capacity: 8.3 kW (11.28 HP), power: 11 kW (14.96 HP), Machine DEMAG Ergotech Extra 50-200 with SEPRO Axess S3 handling robot. Ready for production and available for inspection at any time. 2 pneumatic cascades, 1 AS core pull, 6 integrated hot runner zones. Cjdjx Ex R Ejpfx Aa Horc

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 15 abrasion-resistant -Tire size: 200/50-10/ 6.50 SC 15 RIM 6.50 F-10 -Quantity: 12 pieces available -Price: per piece -Dimensions: Ø 450 x 200 mm -Weight: 23 kg/pc. Cedeyxnpdepfx Aa Hsrc

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 15 -Tire size: 200/50-10/ 6.50 SC 15 RIM 6.50 F-10 Cedpfoyxnbaex Aa Hjrc -Quantity: 24 pieces available -Price: per piece -Dimensions: Ø 450 x 200 mm -Weight: 23 kg/pc.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 7143-1001, clamping force: 500 kN, screw diameter: 30 mm, displacement volume: 106 cm³, injection pressure: 1,995 bar, injection weight: 94 g, opening stroke: 400 mm, installation height: 210 mm, total length: 4,000 mm, total width: 1,400 mm, total height: 2,100 mm, overall weight: 3,400 kg, pump power: 15 W, Please refer to the photos and video for the condition and contents of the offer. The equipment is currently dismantled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. A net invoice can be issued for foreign customers, provided a valid VAT ID number is supplied. Subject to prior sale. Crsdpfxjx Spw Ao Aa Hoc Visit our website to view our additional offers. The mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from the technical data and errors in the article description may occur and are reserved.

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 10 -Tire size: 200/50-10 SC 10 RIM 6.50 F -Rim: 6.50F-10 604700 ET-17 -Bolt circle: Ø 98 x 15 mm -Hub bore: Ø 70 mm -Quantity: 26 pieces available -Dimensions: Ø 450 x 200 mm -Weight: 30 kg/pc. Crsdpfx Aeyxdtxsa Hjc

Condition: like new (used), Year of construction: 1986, functionality: fully functional, Equipment: documentation/manual, safety light barrier, MECOS PRESS BRAKE Crodpfsy Tpaaex Aa Hoc 2000 X 50 TON MODEL MEDA 50 POSITIONED ON 2 AXES MOTORIZED BACK GAUGE USED MACHINE INTERNAL CODE: SVR 424

Condition: excellent (used), Year of construction: 2006, clamping force: 500 kN, screw diameter: 22 mm, clearance between the columns: 355 mm, displacement volume: 41 cm³, injection pressure: 2,800 bar, injection weight: 37 g, mold height (min.): 210 mm, overall weight: 2,700 kg, Clamping force: 50 t Year of manufacture: 2006 Injection unit .../200 Screw diameter: 22 mm Specific injection pressure: 2800 bar Injection volume: 41.8 ccm Cedey Tvvnjpfx Aa Horc Mould clamping system 50/... Clamping force: 50 t Mould plate dimensions: 520 x 520 mm Tie bar clearance: 355 x 355 mm Mould height: 210 mm Opening stroke: 400 mm Maximum platen distance: 610 mm Weight: 2700 kg Dimensions (m) L x W x H: 3.8 x 1.1 x 2.1 m Control: NC4

Condition: good (used), Year of construction: 2015, functionality: fully functional, pressing force: 2,500 t, table width: 2,500 mm, table length: 5,000 mm, total length: 8,000 mm, total width: 8,000 mm, total height: 9,000 mm, overall weight: 55,000 kg, Equipment: safety light barrier, LOIRE SAFE Hydraulic Press – High-Performance System for Toolmaking and Heavy-Duty Forming Crodpfx Asyw Ah Eja Hsc This high-performance hydraulic press in a robust 4-column gantry design has been specifically engineered for demanding applications in toolmaking (tryout/spotting) as well as for large-format forming processes. The stress-relieved, annealed welded construction ensures maximum rigidity and long-term process stability. The machine is equipped with three main cylinders featuring multi-cylinder parallel control, achieving high repeat accuracy within ±0.1 mm. Its powerful hydraulic system, based on Bosch Rexroth components, operates at a maximum working pressure of approximately 450 bar, enabling precise and forceful processing. Control is provided via a Siemens S7-317F PLC, combined with servo-controlled axes (Rexroth MLC) and visualization via Siemens WinCC. This setup allows for fully programmable press cycles, storage of tool parameters, and user-friendly operation with diagnostics and fault monitoring. In terms of safety, the press is comprehensively equipped: light curtains at the front and rear (Category 4), ram parallelism monitoring, emergency stop with defined response time, and optional two-hand operation ensure maximum operational safety. The system is CE-compliant and meets current safety standards. Features include a hydraulic, three-section draw cushion, a hydraulic ram cushion, as well as a movable table with approximately 4,000 mm stroke. The machine is complemented by a DIN-standard ram plate and integrated cutting impact damping for challenging forming processes. Toolmaking (Tryout / Spotting)

Condition: used, machine/vehicle number: 1 284 066, Chuck Ø: 200 mm Bore through: 50 mm Mounting, short taper according to DIN 55027: size 6 outside-Ø of the clamping cylinder: 290 mm Overall height (clamping cylinder to chuck front without jaws): 150 mm Csdpfxscm Tgke Aa Horc pneumatically operated