Used Etima Labeling Equipment for sale (41,266)

Condition: new, Year of construction: 2026, 16 Bar Screw Air Compressor for Fiber Laser –(15 kW, VFD, Tank Mounted, Complete System) Description: High-performance screw air compressor designed for fiber laser cutting applications. This is a modern direct-driven (direct coupled) compressor, where the screw air-end is directly coupled with the motor for maximum efficiency and reliability. The unit is equipped with a variable speed drive (VFD), allowing soft start and automatic pressure regulation based on air consumption. This significantly reduces energy usage and mechanical stress. Compared to conventional compressors (e.g. Airhorse), this unit operates with a much lower noise level (≤63 dB). Technical Specifications: Model: RMZY Series (16 Bar Version) Working Pressure: 16 bar (adjustable) Motor Power: 15 kW / 20 HP Air Flow: approx. 1.4 m³/min Drive Type: Direct coupled (no belts) Motor Type: Permanent magnet motor with VFD Starting Method: Soft start (via inverter) Cooling System: Air cooled Noise Level: ≤ 63 dB (significantly quieter than standard compressors) Voltage: 380V / 50Hz / 3 Phase Integrated Equipment (4-in-1 System): Rsdpsy Ecuzsfx Am Tjcd Air receiver tank – 400 liters Refrigerated air dryer High-efficiency filtration system Oil-air separation system Electronic controller Dimensions & Weight: Dimensions: 1800 × 850 × 1770 mm Weight: approx. 440 kg Key Advantages: Designed for fiber laser cutting machines Direct drive system = higher efficiency, less maintenance VFD control = energy saving & pressure stability Soft start motor = reduced wear and longer lifespan Very low noise level compared to standard compressors Compact, space-saving design High-quality components (SKF bearings, inverter control, etc.) Maintenance: Oil change: every 4000 hours Air filter: every 2000 hours Oil filter: every 2000 hours Oil separator: every 4000 hours Low annual maintenance cost. Also available in: 20 bar version (for higher pressure applications) Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: good (used), functionality: fully functional, Complete Industrial Powder Coating Line for Sale We offer a complete industrial powder coating line in good working condition. The installation has been professionally maintained and is suitable for coating a wide range of steel and metal products. Equipment includes: Pretreatment system Drying oven Powder coating booth Powder spray equipment Curing oven Rcedpfjzqur Hsx Am Tod Conveyor system Electrical control system The complete line is available for immediate sale and can be inspected by appointment. Condition: Well maintained Fully operational before dismantling Suitable for industrial production GEMA OptiStar CG07 Powder Coating Gun

Condition: refurbished (used), Complete cheese grating line for cheddar or Mozzarella cheese blocks. Cheese blocks are cubed and fed to the Cheese grater then up a conveyor dosed with powder and tumbled Arcall Cheese cutter, transfer conveyor, Urschel CC grater, incline conveyor and tumble mixing drum Rcsdep T Tghopfx Am Tsd Can produce 1,000 Kg of grated cheese per hour. A Weigh bagging system can be added to the grated cheese line

Year of construction: 2019, condition: used, The Lemorau MEBR+ is a digital finishing machine based on a modular concept, allowing modules to be added as needed to meet customer requirements. The MEBR+ operates in both full rotary and semi-rotary modes. The semi-rotary mode is suitable for short runs, while the full rotary mode is ideal for large runs at high speeds. Thanks to state-of-the-art servo technology, the registration tolerance remains consistent during acceleration and braking phases, as well as throughout the production process. The Lemorau MEBR+ is equipped with a servo-controlled compensation system that ensures excellent web tension control when the machine is running in semi-rotary mode. Rsdpfxezqnxto Am Tscd Standard equipment: - Maximum rotary speed 200 m/min (656 ft/min) – label stock - Maximum rotary speed 120 m/min (394 ft/min) – die-cutting for precise fit - Maximum semi-rotary speed 40 m/min (131 ft/min), depending on plate size – die-cutting for precise fit - Web width 250, 330, 400 mm (10, 13, 16 in) - Electronic counter (label/meter/roll counter as well as total meter and label counter) - Adjustable splicing table with pneumatic clamps - Electronic web guiding system with ultrasonic sensor for guiding opaque and transparent materials - Automatic web tension control via servo motors – constant and decreasing tension - Memory for 250 jobs for easy and quick job setup - 6 sets of round knives with lateral adjustment - 2 interchangeable pneumatic unwinders with a diameter of 25, 40 and 76 mm (1, 1.5, 3 in) - Detection of paper and liner tears - Rewinding on label entry/label exit - Remote support via internet connection - Automatic stop at the end of the master roll with programmable roll-end function - Semi-automatic rewinding - Foot pedal for step-by-step machine control - Multilingual touchscreen - Die-cutting repeats 203.20 – 431.80 mm (8 – 17 in) – rotary mode - Die-cutting repeats 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode - Maximum rewind diameter: 600 mm (23.7 in) with 1 shaft / 350 mm (13.8 in) with 2 shafts - Maximum unwind diameter: 700 mm (27.5 in) - CE conformity certificate Optional equipment: 1 Anti-static bar 1 “Clear-on-Clear” sensor 1 Corona treatment 1 Speed package (80 m/min in semi-rotary mode) 1 Turret unwinder 2 Flexo unit for spot coating with rotating register 1 Web cleaner QRC (Quick Remote Connection) 1 new die-cutting forme with repeat lengths of 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode approx. 700 die-cutting sheets

Year of construction: 2025, condition: used, New: Yes Empty weight: 2.250 kg Dimensions of cargo space: 245 x 140 x 200 cm Redoxuzupopfx Am Tecd CE mark: yes Serial number: 2002005 Please contact Team DPX for more information

Year of construction: 2026, condition: used, New: Yes Redoxuzucepfx Am Tjcd Empty weight: 690 kg Dimensions of cargo space: 194 x 145 x 144 cm CE mark: yes Please contact Team DPX for more information

Year of construction: 2025, condition: used, New: Yes Empty weight: 35 kg Dimensions of cargo space: 54 x 29 x 58 cm CE mark: yes Rcedpfx Aoxdhfgom Tsd Serial number: 25050168 Please contact Team DPX for more information

Year of construction: 2026, condition: used, New: Yes Empty weight: 400 kg Dimensions of cargo space: 150 x 130 x 107 cm Rjdeznr Dbepfx Am Tecd CE mark: yes Please contact Team DPX for more information AC400V-200kW Automatic Load Bank Rated Voltage: 3P4W AC400V 50/60 Hz Rated Voltage & Frequency: 400VAC; 3 phase 4 wire, 50/60 Hz Power Supply: 3P5W AC400V 50 Hz Rated Power: 200 kW at 400V Duty Cycle: Continuois Cooling Type: Forced Air Cooling (Horizontal air intake and exhaust cooling, there will be louver at air outlet and inlet.) Load Steps: Resistive Load: 9 steps, 1, 2, 2, 5, 10, 10, 20, 50, 100 kW Wire Connection: - Load bank input— busbar (star coupling “Y”) - Control power input—terminal block Communication Interface: RS232/RS485

Condition: new, Year of construction: 2011, functionality: fully functional, Xtralis VESDA VLF-250 very early warning aspirating smoke detector, supplied together with an Apollo XP95 three-channel input/output module in a separate enclosure. The VESDA VLF-250 continuously draws air through a connected sampling pipe network and analyses it using laser-based smoke detection. It is designed for early fire detection in small, business-critical areas of up to 250 m², including server rooms, data centres, control rooms, electrical switch rooms, telecommunications facilities and air-handling installations. The included Apollo XP95 three-channel input/output unit provides independent monitoring of three input channels and independent control of three relay outputs. It is suitable for integration with compatible Apollo XP95 and Discovery fire alarm systems. Xtralis VESDA detector Manufacturer: Xtralis Product range: VESDA LaserFocus Model: VLF-250-00 Equipment type: Aspirating smoke detector Coverage area: up to 250 m² Supply voltage: 18–30 V DC Nominal voltage: 24 V DC Current consumption: approximately 220 mA nominal Current in alarm: approximately 295 mA Sensitivity range: 0.001–0.969 dB/m Maximum sampling pipe arrangement: 1 × 25 m pipe, or 2 × 15 m branches Maximum number of sampling holes: 12 Protection rating: IP30 Approximate dimensions: 256 × 183 × 92 mm Approximate weight: 2 kg Rsdpfszliwgex Am Tecd Serial number: 88013225 Manufactured: January 2011 Made in: Malaysia The VLF-250 includes programmable alarm thresholds, ultrasonic airflow sensing, AutoLearn Smoke, AutoLearn Flow, an event log and an integral status display. Apollo input/output module Manufacturer: Apollo Fire Detectors Series: XP95 Model: XP95 3 Channel Input/Output Unit Number of input channels: 3 Number of relay output channels: 3 Supply voltage: 17–28 V DC Relay contact rating: 1 A at 30 V AC Operating temperature: –20°C to +70°C Protection rating: IP54 Compatible with: Apollo XP95 and Discovery systems Made in: United Kingdom Separate enclosure included Apollo identifies part number 55000-588 as an obsolete legacy product, making this unit particularly suitable as a replacement or spare for existing XP95 installations. Condition- Used.

Condition: used, all stainless steel suitable for thermal oil heating Rsdpfozk Dxcsx Am Tscd nett belt length 6.000 mm nett belt width 600 mm adjustable speed sediment removal system filter mechanical hoists overall dimensions (l x w x h) : ± 7.700 x 2.200 x 2.200 mm with oil circulation pump

Year of construction: 2025, condition: used, New: Yes Empty weight: 10.000 kg Dimensions of cargo space: 400 x 210 x 210 cm Rcsdpozng Uusfx Am Tsd Serial number: 2411167 Please contact Team DPX for more information AC400V-2000kW Automatic Load Bank Rated Voltage: 3P4W 400VAC 50/60Hz Power Supply: External 3P5W 400VAC 50 Hz Rated Power: 2.000 kW Duty Cycle: Continuous Cooling type: Forced Air Cooling (Horizontal inlet air and upwards exhaust cooling) Load Steps @400V: 1, 2, 2, 5, 10, 10, 20, 50, 100, 200, 200, 200, 200, 200, 200, 200, 200, 200kW, total 2000kW Note: when voltage is less than 400V, power will derate according to Ohm’s Law. Wire Connection: - Load bank input—busbar - Control power input—terminal block Communication Interface: RS232/RS485 - Control part IP54

Condition: good (used), machine/vehicle number: 3681, Year of construction: 2023, total length: 4,210 mm, total width: 3,000 mm, operation weight: 6,000 kg, Cometto POWERPACK 186KW from Uniktruck Rjdpfszqvk Rox Am Tjcd

Condition: good (used), machine/vehicle number: 3679, total length: 4,030 mm, total width: 3,410 mm, Year of construction: 2022, operation weight: 3,600 kg, load capacity: 41,000 kg, Seacom UT41 TWIN from Uniktruck Rcjdszqvk Depfx Am Ted

Condition: repair required (used), Year of construction: 1999, functionality: not functional, KALLFASS KC5040/450 universal machine, manufactured in 1999, complete with operating manual, electrical wiring diagram, and parts list. The machine can be used as a source of spare parts or, with some skill, be restored for further use. Equipment and condition can be seen in the attached photos. The price is ex works, unpacked, and excluding VAT. If you have any questions or require additional detailed photos, please do not hesitate to contact us. Rcodpfx Aszmyguem Tsd

Condition: good (used), Machinery from honey processing factory. DC Norris hotrooms, DC Norris settling tanks, DC Norris holding tanks, crystallised tanks, super seed tanks, pump, filter sets, various filling lines to fill squeezy bottles, glass jars and plastic buckets. Rjdpfx Amjpcibme Tecd

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 171 h, load capacity: 2,500 kg, lifting height: 3,600 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,360 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Battery voltage: 80V Battery type: Lithium-ion Battery year of manufacture: 2021 Battery condition: 80 - 100% Rsdpezmkmfjfx Am Tjcd Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cab, safety light, lithium-ion technology.

Condition: excellent (used), Year of construction: 2020, Minipack Torre Replay 55 Evo Shrink wrapping chamber machine 2020, up to 300 products per hour, programmable, max product dimensions 500mm x 380mm x 200mm, 1Ph Rodpfx Amezcg Ede Tjcd

Condition: excellent (used), functionality: fully functional, Very nice foil wrapping and sealing machine for sale. Brand: Beck, type S 17-32, made in Germany. Overhauled in 2017. This machine is equipped with a photoelectric control system and hydraulically operated cylinders. These regulate the work cycle according to the length of the product being packaged. This allows for the packaging of parts of varying lengths in any sequence, enabling fast production. You are welcome to test this machine at our facility. We can arrange transport and packaging for you and load it into a truck or container. Please inquire about a price including transport (location within the Netherlands). If you would like to purchase this machine, please send us your company details and your VAT number. We will then send you a pro forma invoice. Regards, Henk Hoos. Rcodpfx Aozdr Ixom Tjd

Condition: good (used), Year of construction: 2015, Alpha Pack bag filler. Type : AP-1BT-III Filler tube : Ø15mm Welding jaws 15cm. Year - 2015. Rcodpfermm Dfjx Am Ted

Condition: ready for operation (used), No. of sleeve heads: 1 Rcsdpfey A Tlfjx Am Tsd Linear design Type of sleeving: Full product sleeve / partial / bottom sleeve Capacity: up to 12,000 pcs/hour

Condition: used, Year of construction: 2019, Overview This Clever Machines S.r.l. GS 307 is a rotary shrink-sleeve label applicator, built in 2019 and supplied as a complete line together with an STJ3 steam shrink tunnel. It applies partial or full-body shrink-sleeve labels to PET bottles. A single-head sleeve feeding and cutting unit sits over a rotary star-wheel carousel, with the steam-powered STJ3 tunnel shrinking the sleeves downstream. The control system is a modern Allen-Bradley / Rockwell architecture (PowerFlex 525 drives, Kinetix 5500 servo drives and an Allen-Bradley PLC). The line is set up for 500, 1,000 and 1,500 ml PET formats. Technical data - Manufacturer: Clever Machines S.r.l. - Model: GS 307 (line: GS 307 applicator + STJ3 steam shrink tunnel) - Year of manufacture: 2019 - Machine type: rotary shrink-sleeve label applicator with steam shrink tunnel - Applicator: single-head sleeve feeding and cutting system - Capacity: 12,000 containers/h (manufacturer-rated per OEM technical data); seller reports production speeds up to 15,000 bph - Bottle formats: 500 / 1,000 / 1,500 ml PET Rjdezk U E Tspfx Am Tocd - Bottle diameter: up to 120 mm - Sleeve-label height: 40 - 350 mm - Application: partial or full-body sleeve labels - Control: Allen-Bradley / Rockwell (PowerFlex 525 drives, Kinetix 5500 servos, PLC) - Power supply: 400 V, 50 Hz, 3-phase; approx. 10 kW installed; 20 A; Icc 10 kA; IP 55 - Compressed air: 6 bar min, approx. 150 l/min (approx. 70 m³/h) - Working height: 1,300 mm - Weight: approx. 1,800 kg Equipment - Clever GS 307 single-head sleeve label applicator - STJ3 steam shrink tunnel - Format / change parts for 500 / 1,000 / 1,500 ml PET bottles - OEM technical documentation Condition Used. Photographs show a clean, well-maintained stainless-steel machine with modern controls and normal signs of production use. The seller reports the machine as being in excellent condition with approximately 3,000 operating hours, dismantled and stored following the end of its private-label production. Availability Immediately available. Location: Italy. The machine is dismantled and stored, ready for loading; preparation, dismantling and truck loading by the seller (EXW loaded). Inspection on request.

Year of construction: 2022, condition: used, 2022 | Sika AL-264 Sika | Used Small Equipment 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 29500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 3 inspection points 3 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Rcedpfx Aezpalijm Ted Concrete sprayer with 7 pallets of Roiter hoses 10 bar , machine could not be tested 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40936 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2021, condition: used, 2021 | Sika AL-264 LMT | Used Small Equipment 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 29500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 1 inspection points 1 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Concrete blaster 13m3/H , not operationally tested machine looks as it is in working condition 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40944 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: Rcodpfx Aezpalcjm Tod ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2016, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: 565697, type of input current: three-phase, input voltage: 400 V, belt width: 600 mm, conveyor belt width: 600 mm, The Wagner non-ferrous metal separator (NE separator), model 0429 from Wagner Magnete, is one of the manufacturer’s high-performance eddy current separators. Working width: 600 mm. Rjdpfx Amszl Rfxj Tocd • Throughput: depends on the material and grain size. • Rotor speed: up to 3,000 revolutions per minute. • Belt speed: 0.5 to 2.0 m/s. • Weight: 1.2 tons. • Rotor system: Eccentrically mounted with a high pole-changing frequency. • Rotor drive: 4 kW; belt drive: 1.5 kW. The machine and the associated control panel are included in the delivery. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner’s expense and can be delivered EXW at a port or in the production facility. The details for optimal transport need to be clarified. The machine price is quoted without packaging on a pallet.

Condition: used, Year of construction: 2017, Overview  This labelling machine was manufactured in 2017 by NCM Maquinaria. The machine is designed for labelling applications in the wine industry. The machine is currently still installed and can be visited on request. Rcsdpfjzaw Rlox Am Tjd Technical data  - Capacity: 1,500 – 2,000 bph - Application: Wine - Configuration: Model LV+5 - Type: Self-Adhesive - Compatible Bottle formats: 250 ml – 500 ml – 750 ml 1 L - 1.5 L - Nº of Heads: 4 - Label Types: Front, back, neck and fiscal stamp labels