Used Exeron Hsc800/5 for sale (58,865)

Condition: used, lifting height: 64,000 mm, Year of construction: 2022, operating hours: 3,995 h, Weights Empty weight: 86.000 kg Functional Lifting capacity: 80.000 kg Identification Serial number: TE0080CB3095 Other information Front tyres / undercarriage remaining: 0 Hfsdpfx Ajtr Ihuepneg Rear tyres remaining : 0 Tyre brand: - Carrier engine: - Counterweight: 32000 Transport dimensions (LxWxH): 15.17x3.49x3.67 Additional information Please contact PFEIFER GROUP for more information

Condition: used, mileage: 62,585 km, Year of construction: 2020, operating hours: 5,422 h, Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 220.000 kg Identification Serial number: 82609 Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 70200 Transport dimensions (LxWxH): 15.3x3x4 Hfsdpewk T Uijfx Apnjg Additional information Please contact PFEIFER GROUP for more information

Condition: used, mileage: 62,585 km, Year of construction: 2020, operating hours: 5,422 h, Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 220.000 kg Identification Serial number: 82609 Other information Front tyres / undercarriage remaining: 90 Hfodpfxswk Aw Hs Apnog Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 70200 Transport dimensions (LxWxH): 15.3x3x4 Additional information Please contact PFEIFER GROUP for more information

Condition: used, lifting height: 64,000 mm, Year of construction: 2022, operating hours: 1,382 h, Weights Empty weight: 86.000 kg Functional Lifting capacity: 80.000 kg Identification Serial number: TE0080CB3086 Other information Front tyres / undercarriage remaining: 0 Hsdpotr Np Tjfx Apnsfg Rear tyres remaining : 0 Tyre brand: - Carrier engine: - Counterweight: 32000 Transport dimensions (LxWxH): 15.17x3.49x3.67 Additional information Please contact PFEIFER GROUP for more information

Condition: used, machine/vehicle number: 8FBM16T-13088, Year of construction: 2022, operating hours: 790 h, lifting height: 5,500 mm, fuel type: diesel, motor manufacturer: -, Lifting capacity: 1.600 kg Maximum passing height: 214 cm Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: Solideal Front tyre size: 18x7-8 Rear tyre size: 18x7-8 Transport dimensions (LxWxH): 3.2x1.05x2.13 Please contact PFEIFER GROUP for more information Hfodotr Hl Ijpfx Apnog

Condition: used, machine/vehicle number: 008468, X axis working area: 3680 mm Y axis working area: 1380 mm Working Table: Pod and Rail Hjdsy Sgp Ajpfx Apnjfg Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Total number of drilling spindles: 21 Total number of tool changer positions: 34

Condition: used, functionality: fully functional, mileage: 301,436 km, power: 331 kW (450.03 HP), first registration: 07/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Hjdpfxjyta S Eo Apnefg Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam

Condition: new, The Durma 5-axis fiber laser cutting system will be your best partner for manufacturing automotive and other high-precision and complex 3D parts. The system offers 25% more processing area than machines with the same concept. For impeccable cutting performance, the powerful machine body and rotary table will give you the best quality. With the easy use of the fixture, you can save time. No maintenance and service is required thanks to components from well-known manufacturers and high quality materials. High quality 3D cutting can be achieved. With this technology, you have less energy consumption and can increase your business profit. The machine impresses with its speed, reliability and design. HD-FA Technical Data Available in 2,3 and 4 kW X axis: 3,000 mm Y axis: 1.500 mm Z axis: 650 mm B axis: ±135° C axis: ±360°xn Maximum vector speed: 173 m/min. Maximum vector acceleration: 1.73 G Tolerance positioning: ±0.08 mm Repeatability: ±0.08 mm MACHINE DIMENSIONS Machine size: 6168 mm x 3936 mm h= 3700 mm working area: 9.000 mm x 10.000 mm (safe area) Distance of the turntable door: 4.000 mm Hodpfxog Adknj Apnofg machine weight: 16.000 kg Cutting head: Type: 3D Focus type: Automatic Control unit: CNC Siemens Sinumerik 840D SK Screen: 19 inch touch screen Filter Capacity: 2.500 m³/h - 4 kW

Condition: used, mileage: 94,000 km, power: 120 kW (163.15 HP), first registration: 11/2021, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 5, total length: 6,000 mm, loading space length: 2,500 mm, Equipment: ABS, air conditioning, central locking, parking heater, soot filter, Chat now via WhatsApp: Quick & easy contact with our sales advisor. Hsdpfxoy Srg Hj Apnofg Attention!!! Preferential sale to commercial customers only. Internal ID Number: [3362] ----Optional services available: * 12 to 64 months warranty (valid throughout the EU) * New inspection * New TÜV & emissions test (AU) * Nationwide delivery * Financing possible even without down payment * Tow bar/reversing camera can be retrofitted upon request * Spring offer: On request and for a surcharge of only €999, increase of towing capacity up to 3,500 kg (depending on vehicle and manufacturer). ----Vehicle highlights: * German specification vehicle * Regularly serviced * Ready for immediate use * Euro 6 emission standard * Long wheelbase * Mixto configuration with partition wall * Double cab, 5-seater * Tow bar: up to 3,500 kg possible * Automatic climate control * Auxiliary heater * Reversing camera * Navigation system * Panelled cargo area + Bott racking system Special equipment: 13-pin trailer socket, audio system: MB radio with USB and Bluetooth handsfree, attachment rails for roof rack, combi-floor option, DAB radio (digital reception), entry handle on rear right C-pillar, tachograph control front under headliner, digital tachograph, fixed windows in loading/cabin area: front left, fixed windows in loading/cabin area: front right, speed limiter 130 km/h, wooden floor in cargo area, comfort suspension, wiring duct on side wall, spare wheel with driving tires, spare wheel holder under rear frame incl. car jack, seats in loading/cabin area: 1st row, narrow 3-seater bench, interior paneling in loading/cabin area: high wood (up to roof), fleece battery 92 Ah, car jack, warm air duct to loading/passenger compartment, thermal insulated glazing (windscreen with top band filter), additional electric air heater Additional features: 3rd brake light, storage compartment above windscreen, storage compartment below passenger side dashboard, rear tow hook, adaptive brake light, driver airbag, hill start assist, traction control system (ASR), washer fluid level indicator, electrically adjustable and heated exterior mirrors (both sides), outside temperature display, brake assist, automatic headlights, entry handle for sliding door at load compartment partition, electronic brake force distribution (EBV), driver assistance system: crosswind assist, rear doors (opening angle 180 degrees), bodywork: standard van, keyless start, child safety lock, communication module (LTE) for digital services, fuel tank: main tank 71 litres, full partition in cargo area, adjustable steering column (mechanically), headlight range adjustment, Mercedes-Benz emergency call system, engine 2.1 litre - 120 kW CDI CAT, wheelbase 3,665 mm, low emissions according to Euro 6, sliding side door right, seat belt warning (passenger and driver), upholstery: fabric, adjustable passenger and driver seat in cab, engine start/stop system, trailer stability assist (TSA), service interval display (Assyst), gross vehicle weight rating 3.5 t ----Leasing or financing required? We offer attractive terms – also possible with no down payment! Feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rud

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, total length: 8,000 mm, total width: 3,325 mm, table width: 500 mm, table length: 600 mm, table load: 500 kg, overall weight: 12,000 kg, spindle motor power: 11,000 W, 5-axis CNC machine (VMC) MAZAK - VARIAXIS J600-5X MACH-ID 9484 Make: MAZAK Type: VARIAXIS J600-5X Control: MAZATROL matrix 2 Year: 2015 5 Axis Manufacturing cell with automation LANG 20 positions Renishaw 3D Taster with pre-setter ball LANG Preperation system with  vacuum 25 Units LANG pallet with vice / clamp / chucks Only 7155 Working hours ! New EUR 500.000 X - Travel: 850mm Y - Travel: 550mm Z - Travel: 510mm A - Axis: -120 to +30° B - Axis: - 120 to +30° Table Length: 600mm Table Width: 500mm Table load: 500 Table Ø: 600mm Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Feed rate B-Axis: 30Degrees/min Spindle Taper: 40ISO/Bt/Mk Power on spindle: 11kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8000mm Width: 3325mm Height: 3060mm Hfodpfx Apeyyybhonjg Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2004, travel distance X-axis: 1,750 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 600 mm, CNC portal milling machine FPT - STINGER MACH-ID 8829 Manufacturer: FPT Type: STINGER Control: HeidenHain iTNC530 Year of manufacture: 2004 Chip conveyor Laser tool setter Portal Handwheel Full A/B-Automatic head High pressure coolant Specifications Metric US Standard X - axis 1750 mm Y - axis 1400 mm Z - axis 600 mm Table length 1200 mm Table width 1000 mm Hsdpouni D Ejfx Apnefg Table load 5000 Feed X - axis 35000 mm/min. Y-axis feed 35000 mm/min. Feed Z-axis 35000 mm/min. Tool holder HSK 63 ISO/Bt/Mk Spindle power 25 kW spindle speed 18000 rpm Tool changer 30 IKZ 20 Number of controlled axes 5 Chip conveyor Yes Cooling device Yes Dimensions (estimate) length 6000 mm width 4000 mm height 3850 mm weight 21000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: excellent (used), Year of construction: 2013, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,300 mm, table width: 1,200 mm, table length: 4,500 mm, rotary table diameter: 1,250 mm, NC Rotary table 1250 mm with 50 Rpm Full C-Axis  360.000 with HIGH TORQ Drive HSK-100 with 90 kW and 15.000 Rpm 5 Axis simulteneous package Last service in 2023  X - Travel: 4000mm Y - Travel: 1200mm Z - Travel: 1300mm A - Axis: 105° B - Axis: 360000° Table Length: 4500mm Table Width: 1200mm Table Ø: 1250mm Spindle Taper: 100ISO/Bt/Mk Hfedpfx Aex Sqf Iepneg Power on spindle: 90kW Speeds / ranges: 15000Rpm ATC / revolver: 60 Coolant through spindle / Bar:70 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 10500mm Width: 4500mm Height: 4100mm Weight: 34000kg

Condition: good (used), Year of construction: 2005, travel distance X-axis: 760 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, total height: 2,450 mm, total length: 5,200 mm, total width: 4,500 mm, table width: 500 mm, table length: 630 mm, table load: 300 kg, overall weight: 12,000 kg, 5-axis CNC machine (VMC) DECKEL MAHO - DMC 60T MACH-ID 9443 Make: DECKEL MAHO Hjdpfoym R Tgjx Apnofg Type: DMC 60T Control: HeidenHain iTNC530 Year: 2005 € 12.500,00 X - Travel: 760mm Y - Travel: 560mm Z - Travel: 560mm A - Axis: 360000° B - Axis: - 30 to + 120° Table Length: 630mm Table Width: 500mm Table load: 300 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 26kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 5200mm Width: 4500mm Height: 2450mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2003, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, total height: 2,800 mm, total length: 3,200 mm, total width: 2,900 mm, table width: 800 mm, table length: 1,500 mm, table load: 550 kg, rotary table diameter: 800 mm, spindle motor power: 20,000 W, Chip conveyor 3D measuring probe Paper filtration IKZ 15 Bar Under power X - Travel: 1060mm Y - Travel: 710mm Z - Travel: 710mm A - Axis: 360000° B - Axis: - 30 to + 120° Table Length: 1500mm Table Width: 800mm Table load: 550 Table Ø: 800mm Feed rate X-Axis: 15000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 15000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 20kW Speeds / ranges: 12000Rpm ATC / revolver: 32 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 3200mm Hfjdpoym Sdysfx Apneg Width: 2900mm Height: 2800mm Weight: 9500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), travel distance X-axis: 12,000 mm, travel distance Y-axis: 7,300 mm, travel distance Z-axis: 3,000 mm, total length: 30,000 mm, table length: 12,000 mm, table width: 4,730 mm, total width: 12,000 mm, total height: 10,475 mm, table load: 250,000 kg, overall weight: 400,000 kg, Make : Waldrich - Siegen - Typ : PF-F-150(1)-530/400 - No. : 11.093/0 - Age : Overhault 2004 ( Euro 2.2 Mil) X Travel : 12.000 - Y Travel : 7.300 - Z Travel : 3.000 - W Travel : 4.000 - Between column : 5.000 - Table width : 4.730 - Table length : 12.000 - Table load : 19 t / mtr. Ca. 250 ton - Table feed : 10.000 mm/min. - W axis : 3.000 mm/min. - T axis : 6.000 mm/min. - Cross adj. milling head : - Vert. adj. cross rail : - Horizontal hydrostatic spindle ram - Milling spindle Ø : 560 - Milling tool taper : iso 60 - C axis feed : 5.000 mm/min. - Milling motor : 90 kW - Spindle speed : 2.500 R/pm - Z axis stroke : 3.000 - Z axis feed : 2.000 mm/min. - Milling Küma Angle head WF2 90 kw- 450 - Milling Küma Uni. UB1D 60 kw - 2400 - Milling Küma Fixed GB1D 90 kw- 2400 - Milling Küma Angle head WF1? - Electric requirement : 3 x 400 V / 50 Hz - Power requirement : 600 kVA / 630 Amp - Capacity 4.000 L coolant true spindle 20/40 Bar Machine is rebuild in 2004 by Schiess Bed – Table assembly group: * Renewal of sliding lining * Grinding of guideway * Renewal of table drive * Direct linear measuring syst. * Hydrostatic Portal and cross rail: * Modification of adjusting spindle trape Zoidal spindle was recplaced with ball screw * Direct linear measuring syst. * New drive motors for relization of higer speed on feed axes of milling support. * New milling support with hydrostatic guideways Electric system: * Complet elctric cabinet switchgear * Complet new wire * Siemens Sinumrik 840 D in 6 axis !! Equipment / parts : * Complet new raumag janich covers * Complet new double chip conveyor * Complet with big tooling packet * Complet with big mounting equipment - Under power in Europe Hjdeytrxkjpfx Apnsfg - Free directly - Controlled axis X / Y / Z / W / C / B axis - Over all height : 10.475 mm - Over all width : 11.934 mm - Over all length : 30.000 mm - Total weight : ca. 400.000 Kg Rebuild in 2004 for EUR 2.200.000 !This CNC Waldrich Portal milling machines was used in the Energie Field for steam turbien case machining. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), total length: 3,620 mm, total width: 2,025 mm, plate height: 350 mm, Manufacturer: UNION Type: Cast iron Year of construction: 2000 Specifications Metric US Standard Length 3620 mm Width 2125 mm Hfedpfx Aowp Hn Tspnsg Height 350 mm Number of T-slots 7 T-slot spacing / pitch 300 mm T-slot size 34 mm Weight per plate approx. 5200 kg Number of matching pieces 5 Dimensions (Estimate) Length 3619 mm Width 2025 mm Height 350 mm Weight 0 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute a representation or contractual terms. We recommend you verify all important details.

Condition: excellent (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, 5-axis CNC machine (VMC) DECKEL MAHO - DMU80P MACH-ID 9194 Make: DECKEL MAHO Type: DMU80P Control: HeidenHain TNC430 Year: 2000 Hodow Rdl Dspfx Apnjfg

Condition: used, machine/vehicle number: 008501, Position 1: 5 Axis CNC Routers BIESSE-ROVER A - SYNCHRO Hfsdpsy Af Husfx Apnjg Position 2: Panel Feeding and Loading BIESSE-ROVER A - SYNCHRO

Condition: used, Year of construction: 1996, Overview  This Krones Lavatec KES-2-5-312/25-110 bottle washer was manufactured in 1996 and has an output of 29,000 bottles per hour. The machine has been modernized several times, including an S7 control system, caustic filtration with drum screen and pH value measurement for hot water 1. The machine will run until the end of January 2026 and can be inspected in person at any time until then. Technical details  Output: 29,000 bottles/hour Bottle diameter: 54 - 90 mm Bottle height: 180 - 340 mm Equipment & modernizations  Plastic cell with 110 pitch Suitable for swing-top bottles Bottle diameter: 54 - 90 mm Bottle height: 180 - 340 mm Modernizations: Retrofitted S7 control system Drum screen for caustic filtration Railing on the machine Hanger-specific caustic spraying in the deflector Cleaning & heating system: Rental rotating spraying Heating with tube bundle exchanger and hot water Lye concentration measurement and dosing control, also for post-caustic pH value measurement for hot water 1 Soaking & rinsing system: Double pre-soak with sieve belt Lye volume: 30 m³ Caustic solution, hot water 1, hot water 2, cold water and fresh water Head section can be steamed and rinsed with disinfection H₂ suction Hfjdpfx Ajvxtavspneg

Condition: used, Year of construction: 2021, travel distance X-axis: 1,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 740 mm, controller manufacturer: Fanuc, controller model: Series 0i-MF Plus, workpiece diameter (max.): 800 mm, total height: 3,435 mm, total length: 5,575 mm, total width: 4,621 mm, overall weight: 18,000 kg, Equipment: documentation/manual, CNC 5-axis Vertical machining Centre Hjdpfx Aoygw E Njpnsfg CNC Control Fanuc Series 0i - MF Plus Table size Ø 800 mm Number of pallets 1 Maximum workpiece dia x height Ø 1200 x 300 mm Movement X-Y-Z-axis 1600 x 700 x 400/740 mm C-Axis (table rotation) 360° B-Axis travel -11 /+30 ° Spindle speed 15.000 r/min Spindle Taper Big Plus BT40 Spindle motor 18,5/15 kW Magazin Capacity 60 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2001, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 1,800 mm, controller manufacturer: Fanuc, overall weight: 75,000 kg, table length: 1,000 mm, table width: 1,000 mm, controller model: 160i-M, table load: 2,000 kg, CNC Precision Horizontal 5-axis Machining Centre CNC Control: Fanuc 160i-MA Table size 1000 x 1000 mm Table load 2000 kg Number of pallets 5 Max. workpiece diameter x height 1400x1200 mm Movement X-Y-Z-Axis: 1800 mm A-Axis (table tilt) +20 / -110 B-Axis travel 360° Spindle taper DIN 69871/50A Spindle speed 10.000 R/Min Tool store capacity 240 Hfodpfx Apsy Nz Rvensg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2017, travel distance X-axis: 435 mm, travel distance Y-axis: 465 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 80 kg, total height: 2,755 mm, total length: 3,360 mm, total width: 3,870 mm, overall weight: 8,500 kg, spindle nose: MAS BBT 40, 5-axis Vertical Machining Centre CNC Control Matsuura G-Tech 31 i Hodpfx Ajy Ny Akspnjfg Table size ø 130 mm Table load 80 kg Number of pallets 10 max workpiece dia x height 330 x 300 mm Movement X-axis 435 mm Movement Y-axis 465 mm Movement Z-axis 560 mm C-axis (table rotation) 360° A-axis (table tilt) -125/+10° Spindle speed 50 - 15.000 R/min Spindle taper MAS BBT 40 Spindle motor 7,5/5,5 kW Magazin capacity 90 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: like new (used), Year of construction: 2022, operating hours: 12,719 h, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 850 mm, nominal power (apparent): 21 kVA, controller manufacturer: Heidenhain TNC 640 mit CELOS, workpiece weight (max.): 2,000 kg, total height: 3,200 mm, total length: 4,500 mm, total width: 7,100 mm, table width: 850 mm, table length: 2,350 mm, rotational speed (min.): 15,000 rpm, spindle speed (min.): 15,000 rpm, Year of construction: 2022 CNC controller: Heidenhain TNC 640 mit CELOS Axes X-axis travel mm: 2000 Y-axis travel mm: 800 Z-axis travel mm: 850 C-axis degrees: 360º (0,001) B-axis degrees: ±120 Rapid traverse m/min: 50 Acceleration in the axes m/s2: 5 Worktable Table dimensions mm: 2350x850 Max. workpiece weight kg: 2000 Milling/turning table nc: Table dimensions mm: Ø800 Max. workpiece weight kg: 800 Table rotation speed rpm: 50 Spindle Spindle speed rpm: 15000 Spindle drive power kW: 21/16 (40%ED/cont) Spindle torque Nm: 111/85 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: SK 40 Tool magazine slots: 40 Tool changer: Double gripper With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 400 Max tool weight kg: 8 Chip-to-chip time s: from 7,5 Equipment Chip conveyor Hjdpfsy Shgvex Apnsfg Rigid table with integrated rotary table Infrared probe Internal cooling lubricant supply Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Mist collector NC swivel rotary table Preparation for the use of the 3D quickSET MPC – Machine Protection Control Automatic door Automation interface Machine running times Under power: 18669 Spindle Working: 12719 Basic machine dimensions / weight Length mm: 4500 Width mm: 7100 Height mm: 3200

Condition: used, axle configuration: > 3 axles, first registration: 07/2005, total length: 13,380 mm, total width: 2,550 mm, suspension: air, tire size: 245/70 R 17.5, wheelbase: 10,770 mm, Year of construction: 2005, Equipment: ABS, = Additional Options and Equipment = - Air suspension = Further Information = Axle configuration Tyre size: 245/70 R 17.5 Axle brand: Gigant Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tyres; left inner tread depth: 30%; left outer tread depth: 30%; right inner tread depth: 30%; right outer tread depth: 30% Rear axle 2: Twin tyres; left inner tread depth: 30%; left outer tread depth: 30%; right inner tread depth: 30%; right outer tread depth: 30% Rear axle 3: Twin tyres; left inner tread depth: 30%; left outer tread depth: 30%; right inner tread depth: 30%; right outer tread depth: 30% Rear axle 4: Twin tyres; steered; left inner tread depth: 30%; left outer tread depth: 30%; right inner tread depth: 30%; right outer tread depth: 30% Rear axle 5: Twin tyres; steered; left inner tread depth: 30%; left outer tread depth: 30%; right inner tread depth: 30%; right outer tread depth: 30% Weights Unladen weight: 13,390 kg Payload: 56,610 kg Gross vehicle weight: 70,000 kg Functional Loading platform height: 90 cm Condition Damages: none Identification Hfsdjy Spp Sjpfx Apnsg Registration number: OH-67-TL

Condition: good (used), mileage: 1,160,023 km, power: 294 kW (399.73 HP), first registration: 03/2013, fuel type: diesel, axle configuration: 6x2, wheelbase: 4,700 mm, fuel: diesel, fuel tank capacity: 700 l, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, total length: 9,450 mm, total width: 2,500 mm, total height: 3,050 mm, loading space length: 6,100 mm, loading space width: 2,450 mm, loading space height: 1,650 mm, Year of construction: 2013, Equipment: ABS, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, onboard computer, parking heater, power assisted steering, retarder, traction control, = Additional options and equipment = Hedpfxsyzagmo Apnefg - Aluminium fuel tank - Heated mirrors - Differential lock - Sliding roof - Sleeper cab - Parking heater - PTO (Power Take-Off) - Central lubrication = Further information = Transmission: GR, automatic Front axle: Steered Number of cylinders: 6 Engine displacement: 12,470 cc Unladen weight: 13,640 kg Payload: 12,360 kg Gross vehicle weight: 26,000 kg Technical condition: good Please contact Vitali Lenda for further information.