Used Fac 4V-Xt3020 for sale (1,981)

Condition: reconditioned (used), Year of construction: 1990, operating hours: 10 h, functionality: fully functional, machine/vehicle number: S3370, type of input current: three-phase, CM M1500 Shot Blasting Machine CM S 3370 Maximum product dimensions: - Maximum product height: 1500 mm (measured under the hook) - Maximum diameter: Ø 1200 mm - Maximum weight: 700 kg - Equipped with 2x load-bearing hooks - 3x Turbine Ø 330 mm, 6-blade configuration - 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors - Hook movement manual - Automated hook feed into the machine - Automated door operation - Fully overhauled CM shot blasting installation Fgodpjxqzmkjfx Apwsb Mechanical and electrical systems have been completely refurbished to specification: Mechanical: - Motors & drives completely disassembled, fitted with new bearings and new seals - Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra - All augers replaced and fitted with HARDOX auger flights - All auger bearings replaced - Abrasive media elevator fitted with new elevator belt, return wheels & bearings - All chain drives & sprockets replaced - Hook feed system to machine modernized - Hook drive system completely overhauled - Compressed air supply replaced - Pneumatic cylinders & valves renewed/overhauled - 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical: - Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors) - Siemens electric motors preventively rewound & tested, fitted with new bearings - Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel - Electrical control panel completely renewed with new relays, fully compliant with 2023 standards - Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process - Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits The machine is fully operational and available for immediate sale. The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media). 1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.

Condition: used, • Bar cart • Length = 1600 mm • Width = 1200 mm • Height = 2600 mm • 50 compartments • 20 units available Fgjdpjyf Efnofx Apweb

Year of construction: 2011, condition: ready for operation (used), A 2-tank spray/flood cleaning machine Mafac is available. Basket dimensions X/Y/Z: 660mm/480mm/338mm, max. batch weight: 100kg, spray pressure pump power: 7.5kW, spray cleaning directions: 5, basket batch flooding: 50%, filling volume: 830l, heating power: 30kW. Machine dimensions X/Y/Z: approx. 2200mm/1500mm/2050mm, weight: approx. 1400kg, control: Siemens Simatic S7-1500. Documentation available. On-site inspection is possible. Fsdpfx Apjx I Rrgewegb

Condition: ready for operation (used), A complete bending line for the production of flange rings is available. Workpiece dimensions X/Y: 440mm/350mm, max. cross-section (S355 NL): 65000mm², max. flat steel length: 22000mm, max. outer ring diameter: 7000mm, max. inner ring diameter: 2320mm, max. ring weight: 11t. 1) Preheating furnace holes, machine dimensions X/Y/Z: approx. 1500mm/500mm/22000mm. 2) Faccin conveyor belt, length: 22000mm. 3) Ring bending machine Faccin Giotto 3000. 4) Flash butt welding machine Asdorfer HY 1500, power: 1500kVA. 5) Faccin handling system, max. ring diameter: 6500mm. Documentation available. On-site inspection is possible. Fjdpevr Edaefx Apwegb

Year of construction: 2005, condition: ready for operation (used), Tank capacity: 775l, max. batch weight: 100kg, heating capacity: 26kW, max. temperature: 75°C, basket dimensions X/Y/Z: 660mm/480mm/338mm, fine filtration tank 1/2: 100µm/50µm. Machine dimensions X/Y/Z: approx. 1850mm/1400mm/1800mm, weight: approx. 950kg. The machine was overhauled in 2024 and has not been used since. Including basket rotation with swivel drive, automatic water filling and oil separation with coalescence separation unit and oil collection container. Documentation available. On-site inspection is possible. Fgjdpswr Dxhefx Apwjb

Condition: good (used), Year of construction: 2016, functionality: fully functional, total height: 4,000 mm, overall weight: 12,000 kg, temperature: 900 °C, Equipment: safety light barrier, TOOLS FACTORY TF Millenium 875 Plus Thermoforming machine Fjdpfx Apsyy Rrdswsgb Stairs Metal mould frame – 3 pieces Punch (die) Cooling system modification Black resin used for moulds and metal frame New filters for the machine Dimensions of the thermoforming machine: 2 identical sections, each 350 cm x 550 cm x 355 cm, weight per section is 6 t. We provide machine dismantling, packaging, and loading onto truck. We can also offer installation of the machine at your facility (optionally, upon agreement).

Year of construction: 1986, condition: ready for operation (used), Working width: 1250mm, max sheet thickness: 3mm, with loading table, vacuum lifter, feed table with rollers, ejector, output table, control panel and manual, inspection is possible, available from March 2024. Fsdpfx Apeq A Un Sjwegb

Condition: excellent (used), Year of construction: 2010, Technical Data: Working width: 6,500 mm Max. bending capacity: 7.0 mm Max. prebending: 5.0 mm CNC control Top roll diameter: 420 mm Diameter of side rolls: 315 mm Diameter of central lower roll: 400 mm Conical bending device via tilting of the two side rolls Mobile control panel with digital display Hydraulic drop-end bearing CE marking Motor power: 22 kW Dimensions (L x W x H): approx. 9,200 x 2,350 x 1,900 mm Net weight: approx. 39 tons Fgsdpfx Aex Iitiopwsb Additional equipment: Side bending aid Adjustable upper bending aid Condition: Very good condition, little used Operating hours: 100 h The seller accepts no liability for errors in writing or data transmission. The machine is, in terms of appearance, technology, and wear, commensurate with its age; used machines are sold without any warranty.

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 200 h, total length: 1,590 mm, total height: 2,130 mm, total width: 1,610 mm, type of input current: AC, input voltage: 230 V, input current: 30 A, travel speed (max.): 6,000 mm/min, space requirement length: 2,000 mm, space requirement height: 2,500 mm, space requirement width: 3,800 mm, Array – Your Solution for Industrial 3D Printing Production Array is a scalable platform for additive manufacturing, designed for the production of end-use polymer parts directly on your shop floor. Featuring integrated robotics, intelligent software, and high-performance FFF printing, Array reduces labor costs, increases productivity, and delivers series-quality components—on-site and exactly when you need them. Your benefits: Efficient & Cost-saving: Automated processes reduce personnel costs Fast & Flexible: High throughput for your production Industrial Quality: End products in series quality, available immediately Act now: Discover our pre-owned Array systems—inspected, reliable, and offered at attractive prices. ✅ Request your quote now ✅ Immediately available—fast delivery Fgodpfexl Ry Aex Apwjb

Condition: excellent (used), 30 linear meters of shelving rack Schäfer Type R3000 Used item, like new condition, see photos Height: 2.5 m Depth: 80 cm Load capacity per shelf: 250 kg Bay width: approx. 128 cm Asking price: €6,900,-- net ex stock The offer includes: 24 uprights or frames, 2.5 m, galvanized 144 shelves, 250 kg load capacity per shelf, galvanized 9 cross bracings for stabilization 6 shelf levels per bay (additional levels available at extra cost) Fsdpfxod Nf Svo Apwsgb Also available with a bay width of 100 cm! Other configurations possible. Heights of 2.5 m or 3.5 m available. Goods are in stock. Transport and assembly on request. Inspection possible at any time by appointment. Further information available upon request. Over 5,000 linear meters of pallet racking from various manufacturers always in stock. (Specifications, technical details, and prices subject to change and prior sale! Please see our terms and conditions. All prices exclude VAT, ex stock.) Purchase / Sale We are continuously buying or offering various items from different sectors. Sweep-clean business clearances Liquidations Fast – Flexible – Efficient! We also clear and/or dispose for insolvency administrators. Please email us a brief description, and we will contact you promptly. To visit our page, please click on our logo!

Condition: good (used), 130 linear meters shelving system Schäfer Type R3000 Used equipment, as new condition, see photos Height: 2.5 m Depth: 80 cm Load per shelf: 250 kg Bay width: approx. 128 cm Negotiable price: €26,800.-- net, ex stock Offer includes: - 101 uprights or frames, 2.5 m, galvanized - 600 shelves, 250 kg load per shelf, galvanized - 34 cross braces for stabilization 6 levels per bay (more levels available at additional cost) Also available with 100 cm bay width! Other configurations possible. Heights of 2.5 m or 3.5 m available. Goods are in stock. Transport and assembly available on request. Inspection possible at any time by appointment. Further information on request. Fgedpjd Nftxjfx Apwob Always over 5,000 linear meters of pallet racking from various manufacturers in stock. (Technical data, information, and prices subject to change and errors. Intermediate sale reserved! See our General Terms and Conditions. All prices excl. VAT, ex stock.) Purchase / Sale We are continuously looking for and offering numerous items from various fields. - Swept clean clearance of business premises - Company liquidations - Fast – flexible – efficient! We also clear or dispose for insolvency administrators. Send us a few keywords and we will contact you immediately. To visit our website, please click on our logo!

Condition: good (used), Approx. 30 linear meters of shelving system Schaefer R3000 Manufacturer: Schaefer R3000 Like new condition, see photos. Over 300 meters available Uprights, galvanized, height 2.5 m, depth 40 cm Shelves, galvanized, 100 kg load capacity per shelf, bay width approx. 100 cm Negotiable price: €2,690.00 net ex stock The offer includes: Fjdpfxecfhx Ts Apwogb - 31 uprights or frames, 2.5 m, galvanized - 90 shelves, 100 kg load capacity per shelf, galvanized - 10 cross bracings for stability - 3 levels per bay (additional levels available for a surcharge) - Other configurations possible. Heights of 2.3 m, 2.5 m, or 3 m available. Goods are in stock. Constantly over 3,000 linear meters of pallet racking from various manufacturers in stock. Transport and assembly available on request. Further information upon request. (Changes and errors in technical data, details, and prices as well as prior sale reserved! See our T&Cs. All prices exclude VAT, ex stock.) Buying / Selling We are constantly looking for and offering numerous items from various sectors. To visit our page, please click on our logo! - Broom-clean business clearances - Company liquidations - Fast - flexible - efficient! We also clear and/or dispose for insolvency administrators. Send us a few keywords and we will get back to you immediately.

Condition: new, functionality: fully functional, Year of construction: 2026, A STURDY GIANT FOR THE PRODUCTION OF NATURAL GAS PIPELINES Exclusive Features: • Max Pipe Length: 12.000 mm • Max Bending thickness (mild Steel): 12.000 x 28mm • 3 rolls with Variable Axis configuration • Anti-deflection System for Top roll • Anti-deflection System for Bottom Rolls • 3 rolls drive • Automatic Pipe Ejection System Capacities for Material Yield 360Mpa 12.000 x 17mm a D= 1500mm Fgodpfx Apegurb Hsweb 12.000 x 15mm a D= 550mm 6.000 x 22mm a D= 1500mm 6.000 x 19mm a D= 550mm Possibility of adding interchangeable top rolls to reach Higher thickness capacities up to more than 12000x23mm or Smaller Diameters down to 400mm. Available immediately from the factory!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total length: 1,820 mm, total width: 1,400 mm, total height: 1,800 mm, overall weight: 950 kg, input voltage: 400 V, input frequency: 50 Hz, load capacity: 100 kg, Equipment: documentation/manual, For sale: MAFAC Elba as a 2-bath cleaning system, year 2019, with approx. 2,500 cleaning cycles in very good condition. (Sale exclusively within Austria) Equipment: - Rotating warm air impulse blower - Stationary hot air drying system - Main stream fine filtration MT 1 - Main stream fine filtration MT 2 Fedewyc Siopfx Apwogb - Variable speed control of basket rotation - Control cabinet with top lighting - Leveling kit - Timer - Safety grid MW 20 - Chemical dosing proportional to fresh water (2 units) - Suitable for Euro-standard baskets: 600 L x 400 W x 288 H mm

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Facom foratrice Through-hole drill f-v3r-2l-3f+2tagr1 used 2015 Brand: Facom foratrice Model: Fedpfjx Rd Elsx Apwjgb Through-hole drill f-v3r-2l-3f+2tagr1 Description: Through-feed drill F-V3R-2L-3F+2TAGR1 All heads and saws are screw-adjustable with mechanical indicators. Drilling depth is controlled electronically. Minimum workpiece length: 300-350 mm Maximum: 2000 mm Automatic feeder Bsbtt Sov U Uw Ujx Nteda Double-sided cutting with angle adjustment Double-sided drilling with angle setting 3 drill heads top + 2 wheels + 2 rear All heads have angle adjustment Electronic position markers I can send a video via WhatsApp The machine is operational and connected; you can test it 2015 Year: 2015

Condition: good (used), 70 running meters of shelving Schäfer type R7000 used, good condition, see pictures height 3 m depth 50 cm load / compartment 200 kg bay width ca.99,8 cm Negotiable price: € 9.490,-- net ex stock Offer consists of: + 71 pcs. uprights or frames, 3 m galvanized +350 pcs. Shelves, 200 kg load/shelf, galvanized 5 levels per bay (more are of course possible at extra cost) Different heights up to 12 m available. Goods are in stock. Fodpfx Ash Et Twepwegb Transport and assembly possible on request. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous articles from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: good (used), Schaefer shelving unit, type R 3000 Over 2000 meters available As good as new 50 cm depth available Negotiable price: € 2,550.00 net Offer consists of: Approx. 20 linear meters of shelving, 2.3 m high, 50 cm deep, 100 kg load/compartment. Field width approx. 100 cm 21 uprights or frames, 2.3 m, galvanized 100 shelves, 100 kg load/compartment, galvanized 4 cross braces for reinforcement. 5 levels per field (of course more are possible for an additional charge) Other configurations possible. Heights 2.3m, 2.5m or 3m available. Shipping/transport costs on request Fgedpfsb Rhhgsx Apwjb Viewing possible at any time by arrangement. (Subject to changes and errors in the technical data, information and prices as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse) Purchase/sale We are constantly looking for or offering numerous items from a wide range of areas broom-clean business clearances business liquidations fast - flexible - quick-witted! We also clear and/or dispose of for insolvency administrators. Write to us with a few keywords and we will get back to you immediately.

Condition: good (used), 30 running meters of shelving Schäfer type R7000 used, good condition, see pictures height 2,1 m depth 50 cm load / compartment 200 kg bay width ca.99,8 cm Negotiable price: € 3.250,-- net ex stock Offer consists of: + 31 pcs. uprights or frames, 2,1 m galvanized +120 pcs. Shelves, 200 kg load/shelf, galvanized 4 levels per bay (more are of course possible at extra cost) Different heights up to 12 m available. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Fedpoh Eulkjfx Apwjgb Purchase / Sale We are constantly looking for, or offer numerous articles from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: good (used), Approx. 30lfm shelf rack system Schaefer R3000 Manufacturer: Schaefer R3000 as good as new, see pictures. upright, galvanized, 2,5 m height, depth 60 cm Shelves, galvanized, 200 kg load/ shelf, shelf width approx.100 cm Negotiable price: € 3.290,00 net ex stock Offer consists of: Fodeccxuijpfx Apwegb 31 pcs. uprights or frames, height 2,5 m, galvanized 90 pcs. Shelves, 200 kg load per shelf, galvanized 10 pcs. cross bracing for stiffening 3 levels per field (of course more levels are possible against surcharge) Other combinations possible. Heights 2,3m, 2,5m or 3m available. Goods are in stock. Constantly more than 3000 running meters of pallet racks from numerous manufacturers in stock. Transport and assembly on request. Further information on request. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our AGB, all prices excl. VAT ex stock) Purchase / Sale We look for, and/or offer constantly numerous articles from most diverse ranges. To get to our site, please click on our logo! broom-clean business evacuations company dissolutions Fast- flexible - ready to hit! We clear and dispose also for liquidators. Write us with some keywords, we will contact you immediately.

Year of construction: 2014, condition: new, Approx. 30 meters of tire rack in stock 2m, 3,35m, 4 m high in stock. Completely new racking system from a large German manufacturer. Load plates documents etc. are self-evident. Frame blue RAL 5010, infill and base plates galvanized. Frame available pre-assembled from 2 m to 7 m height Supports orange, RAL 2004 beam length: 3,6 m, 1.000 kg shelf load 3 levels per bay . Negotiable price: € 2.070,00 net ex stock Offer consists of: 9 pcs. frame pre-assembled, depth 50 cm, height 3,36 m 48 pcs. support, length 3,6 m, 1000 kg load / compartment 96 pcs. safety catches 18 pcs. concrete anchor Fgedpsb H Scyefx Apwjb Goods are in stock. Transport and assembly possible on request. Other compositions on request. Beam lengths of 1.80, 2.70 and 3.60 m available. Constantly over 3000 running meters of pallet racks from numerous manufacturers in stock Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our AGB, all prices excl. VAT ex stock Purchase / Sale We look for, and/or offer constantly numerous articles from most diverse ranges broom-clean business evacuations company dissolutions Fast- flexible - ready to hit the ground! We also clear for liquidators. Write us with some keywords, we will contact you immediately.

Condition: like new (used), 60 running meters tire rack Nedcon New & used, see pictures. Height 3 m Depth 50 cm Beam length 3.7 m Beam with load/shelf 1000 kg Frame blue Beam painted blue Negotiable price: € 5.250,-- net ex stock Offer consists of: Fodpfxei Hl T Is Apwjgb + 16 pcs. frames pre-assembled, depth 50 cm, height 3 m + 90 pcs. beams, length 3,7 m, 1000 kg load/slot + 180 pcs. suspension locks + 64 pcs. concrete anchors Goods are in stock. Transport and assembly possible on request. Inspection possible at any time by arrangement. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: like new (used), 200 lfm Fachbodenregal Schäfer R3000 Fgodjdz Agdepfx Apwob

Condition: good (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: 4ROLL, roller (bottom) diameter: 470 mm, roller (top) diameter: 470 mm, side roll diameter: 420 mm, roller diameter: 470 mm, roller length: 3,050 mm, working width: 3,050 mm, working height: 1,800 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 45 mm, sheet thickness aluminum (max.): 45 mm, sheet thickness copper (max.): 45 mm, overall weight: 43,000 kg, total length: 7,700 mm, total width: 2,410 mm, total height: 2,470 mm, power: 37 kW (50.31 HP), input voltage: 380 V, type of input current: three-phase, working length: 3,050 mm, Equipment: documentation/manual, emergency stop, PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM MODEL 4HCI3-35/30 YEAR 1990 PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE PINCH PRE-BENDING Machine in good working condition Bending capacity -Plate width : 3000 mm Fgodpfx Aewb Scmspwjb -Rolling plate thickness 40 mm - Prebend thickness 35 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower 470 mm -side rolls left/right 420 mm • Hardening of the 4 rolls high strength surface • 3 rolls driven powered with gear unit with hydraulic motor • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening front hydraulic drop-end to unload the closed shell. • Variable speed working roll bending rotation hydraulic speed fast/slow. • Console electric on wheels with centralized commands joysticks and 3 digital readout. • Digital readouts of the rolls position bending and pre-bending repeatability. • Hydraulic tank capacity oil 350 liters – power electric 37 Kw voltage 380 /50 • Dimension 7700 x2410 x H 2470 mm - weight 43000kgs

Condition: good (used), Year of construction: 2018, Metal clad medium voltage switchgear - producer Efacec Portugal, type Normafix 24, configuration - metering panel ( incommer ) + 2 x outlet disconnector fuse switch for transformer 24kV 630A 16kA, metering panel do not include voltage and current instrumental transformers, posssible to fill them for reaquest for additional payment. Fgedpfx Asv Erz Ejpweb

Condition: new, Surface Shields SC300XL 200 pcs Shoe Covers. Please check out our other listings as well. Fgedpfx Apsvxvlzewob