Used First Mcv - 2000 for sale (11,958)

Condition: excellent (used), Optical Emission Spectrometer Ultima 2 benchtop unit, sequential spectrometer with a 1m monochromator, 2400 g/mm grating in first and second order, 160-800 nm without image Ndedpfxjzhkcco Aazeb Rapid overview analysis IMAGE: Rapid overview analysis IMAGE NAVIGATOR for JY 2000-2, JY Ultima 2 or JY Ultima 2C External closed cooling circuit for cooling the RF coil of the Ultima 2 Argon humidifier – for the analysis of solutions with high salt content. ULTIMA 2 ICP-OES – Optical Emission Spectrometer Reliable, highly efficient 40.68 MHz semiconductor generator Complete and precise wavelength scan from 160 to 800 nm as standard Highest practical resolution

Condition: good (used), Brand: Videojet Nsdpfx Aeyt Hmpoazodb Type: Inkjet Marking Machine Model: Excel 2000

Condition: excellent (used), Year of construction: 2009, Private sale: Hymermobil with numerous extras. Features include 2 air conditioning units, 2 auxiliary heaters (diesel, gas, and electric), ceramic toilet with 2 cassettes, rear garage, first registration 24.08.2009. Other highlights: drop-down bed, leather upholstery, shower, 2000-watt generator with dedicated built-in petrol tank (operable from inside above the oven), 4 solar panels, 1 vehicle battery and 3 habitation batteries (1 year old), 3,300 kg towing capacity. Iveco chassis with automatic transmission, cruise control, 5,400 kg permissible gross weight, 100 km/h speed approval, 2 heated external drawers, underfloor heating and hot water operated via gas or electricity. Includes 2 gas bottles with automatic switchover, twin rear tires, only 78,000 km driven. External shower with hot water, Goldschmitt rear air suspension, rear single beds with option for a full-width sleeping surface (2 additional sections, both long and short available). Automatic satellite system, 2 TVs. Vehicle inspection valid until May 2026 without defects. Approved for transport of up to 8 persons. First registration 24.08.09, 130 kW diesel, very economical—current consumption at 100 km/h is 12.1 l/100 km, at 80 km/h only 10 l/100 km. Vehicle length: 8.19 meters. Additional locks on entry door, separate driver’s cab door, and both garage doors. Reversing camera with multiple viewing angles. Large air awning, kitchen cabinets, carpet, etc., for outdoor use available and can be included if interested. Ndsdpepl Sngofx Aazsb

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,290 mm, total length: 2,000 mm, total height: 1,000 mm, empty load weight: 50 kg, load capacity: 250 kg, table width: 1,290 mm, table length: 2,000 mm, Demo model assembly table, type AT-2000 (see photo 1). Work table with adjustable height between 850mm and 1,000 mm. Ndodpfez D Hu Djx Aazob The top surface is fitted with rubber. Working surface area: 2,000 mm x 1,290 mm. Demo model, available for immediate delivery. Price: €995, excluding shipping costs. We are actively looking for dealers in Europe! See more examples of our products in the photos (see photo 2 and onwards). DutchteQ develops high-quality, modular workshop equipment for the façade construction industry (wood, aluminum & PVC). Interested? Contact us and we will be happy to discuss the possibilities.

Condition: used, mileage: 880,000 km, power: 353 kW (479.95 HP), first registration: 06/2007, fuel type: diesel, overall weight: 26,000 kg, gearing type: mechanical, Equipment: ABS, all wheel drive, MAN TGA 26.480 First registration: km 6x4 Manual transmission Nedezc Dc Tspfx Aazedb Transmission was repaired, and the clutch was replaced 3 years ago. German vehicle, first owner. Crane: Palfinger PK 36002 4 outriggers Continuous rotation crane Remote control Please visit our website: ---- German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/…?/…?... Roman We will gladly take care of your financing or leasing needs. EU sale: net price upon presentation of company documents and tax/VAT number. VAT deposit: 2000 €. Our services for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Accommodation options - Airport transfer (Munich) or train station transfer (Passau)

Condition: used, mileage: 880,000 km, power: 353 kW (479.95 HP), first registration: 06/2007, fuel type: diesel, overall weight: 26,000 kg, gearing type: mechanical, Equipment: ABS, all wheel drive, MAN TGA 26.480 Registered: km 6x4 Njdpfx Aszc Dc Heazedb Manual transmission Transmission was repaired and the clutch was replaced 3 years ago. German vehicle, first owner. Crane: Palfinger PK 36002 4 outriggers Endless rotation crane Radio control Please visit our website: ----German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/?????/?????... Roman We will be happy to assist you with financing or leasing. EU sale: net price upon presentation of company documents and VAT number. VAT deposit: 2000 €. Our services for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Transfer to Munich Airport or Passau train station

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 00500000321, turning length: 2,000 mm, turning diameter: 630 mm, spindle speed (max.): 4,000 rpm, spindle bore: 118 mm, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 2,050 mm, total height: 3,500 mm, total length: 10,000 mm, total width: 5,000 mm, overall weight: 20,000 kg, controller manufacturer: DMG, controller model: ERGOLINE, input voltage: 400 V, input frequency: 50 Hz, input current: 160 A, nominal power (apparent): 110 kVA, operating hours of spindle: 14,700 h, Equipment: chip conveyor, DMG CTX GAMMA 2000 TC CNC Turning and Milling Center - Please note: the spindle operating hours may increase slightly! - Swing diameter: 630 mm - Distance between centers: 2260 mm Ndodpfx Aajzxxhhezeb - Max. workpiece weight (chuck jaws/chuck weight): 250/150 kg - Max. workpiece center of gravity from the spindle flange: 250 mm - Travel range B1: 240° - Travel range Z2: 1910 mm - Travel range Z3: 1910 mm - Steady rest clamping range DW: 45 - 310 mm, weight: 152 kg - Steady rest width C: 145 mm - Spindle flange diameter: 220 H 5 mm - Chuck diameter: 500 mm - Bar diameter: 102 mm - Diameter of the front bearing: 160 mm - Tool holder: HSK 63 A - Includes a 36-position tool changer The machine is equipped with a tailstock, an automatic steady rest from SMW AUTOBLOK, and a three-jaw chuck from SMW, diameter: 300 mm. It also includes additional jaws, another chuck, a chip conveyor, and a coolant system. Please note: the machine can be transported on a truck with a width of up to 3000 mm. FCA D-63843 Niedernberg - loaded onto a truck.

Condition: used, mileage: 957,000 km, power: 265 kW (360.30 HP), first registration: 09/2014, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, loading space length: 9,000 mm, loading space width: 2,500 mm, loading space height: 2,250 mm, Year of construction: 2014, Equipment: ABS, electronic stability program (ESP), tail-lift, MERCEDES-BENZ ANTOS 2536 REFRIGERATED TRUCK / TAILGATE LIFTER / CARRIER / 9.00M / EURO 6 VEHICLE VEHICLE HISTORY GERMAN VEHICLE IN SERVICE UNTIL RECENTLY ? INTERNAL NUMBER: S15 ECC ? VIDEOS, DETAILED PHOTOS AND FURTHER VEHICLE DATA AVAILABLE. WE WILL GLADLY SEND YOU EVERYTHING IMMEDIATELY VIA WHATSAPP, INDICATING THE INTERNAL NUMBER S15. ----VEHICLE EQUIPMENT ? REFRIGERATED TRUCK ? ORTEN BODY ? AUTOMATIC TRANSMISSION ? ENGINE BRAKE ? CRUISE CONTROL ? LIFT AXLE ? HILL START ASSIST ? DIFFERENTIAL LOCK ? HANDS-FREE SYSTEM ? COMFORT SEATS ? HEATED SEATS ? REVERSING CAMERA ? STAND HEATER ? AIR SUSPENSION (REAR) ? FRONT AXLE WITH LEAF SPRINGS----REFRIGERATION UNIT ? CARRIER REFRIGERATION UNIT ? TYPE: SUPRA 950 U ? FREEZING CAPACITY UP TO -29 DEGREES----TAILGATE LIFTER ? MBB TAILGATE LIFTER Nsdpfx Aasz Edtajzjdb ? TYPE: BC 2000 S.4 ? LOAD CAPACITY: 2,000 KG----FURTHER INFORMATION ? FIRST REGISTRATION: 15.09.2014 ? MILEAGE: 957,000 KM ? BODY LENGTH: 9.00 M ? WIDTH: 2.50 M ? HEIGHT: 2.25 M ? TIRE SIZE: 315/70 R22.5 ? TIRES IN GOOD CONDITION ? 3 AXLES WITH IDENTICAL TIRES ? POWER: 265 KW / 360 HP ? ENGINE DISPLACEMENT: 10,677 CM³ ? EMISSION CLASS: EURO 6 ? PERMISSIBLE TOTAL WEIGHT: 26,000 KG ? UNLADEN WEIGHT: 12,260 KG ? PAYLOAD: 13,740 KG ? VEHICLE AVAILABLE IMMEDIATELY ? VEHICLE READY FOR IMMEDIATE USE----NOTES / SPECIAL FEATURES ? NOTE: VEHICLE WITHOUT AIR CONDITIONING ? NOTE: WINDSCREEN CRACKED AT THE BOTTOM, VISIBILITY NOT AFFECTED ? NOTE: TAILGATE LIFTER WORKS, BUT DOES NOT LOWER COMPLETELY (ONLY TO ABOUT HALF HEIGHT)----EXPORT / NOTES EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2,000¤ EXPORT REGISTRATION EXW POSSIBLE WITHIN 10 MINUTES (APPROVED EXPORTER). VEHICLE RESERVATIONS ARE ONLY ACCEPTED IN WRITING. VERBAL AGREEMENTS ARE NOT BINDING. SUBJECT TO CHANGES, ERRORS AND PRIOR SALE.----LEGAL INFORMATION THIS ADVERTISEMENT DOES NOT CONSTITUTE A BINDING OFFER WITHIN THE MEANING OF SECTION 145 OF THE GERMAN CIVIL CODE (BGB). IT SERVES SOLELY TO INITIATE A CONTRACT. ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE. NO GUARANTEED PROPERTIES. SALE IS MADE EXCLUSIVELY IN ACCORDANCE WITH OUR GENERAL TERMS AND CONDITIONS.----WHATSAPP CTA (YOUR STANDARD) For more photos, videos and detailed vehicle data, please contact us directly via WhatsApp, stating the internal number (S15). You will receive all available documents and information immediately.

Condition: used, Year of construction: 1998, This model of machine is fitted with 2 independent sensitive hydraulic copy units that can work from either a template or sample. The first cutter would be set for roughing out, the second one for the finishing cut that will enable a component to be produced in one pass. There is still the possibility to programme a second automatic pass of the finishing gouge for heavy work. The machine is also equipped with hydraulic tailstock unit and hydraulic operated back knives. Year - 1998 CE Nodpfx Aaozd Uv Eozjdb The unique feature of the T5E is saddle movement by precision recirculating ball screw with programmeable electronic control to the feed speed to ensure optimum turning flexibility and quality. This precision feature allows the operator to perfectly control the saddle advance in relation to the complexity of the turning and the optimized saddle speed can then be stored within the memory of the machine. 2000mm turning capacity between centres NC electronic control to saddle movement with infinitely variable feed 0 to 12m/min Two speed 4/5.5hp motor giving six spindle speeds 900-1500-1800-2250-3000-4500rpm Two Hydraulic Copy Units each mounted with horizontal vee type gouges hss 2 Vertical back slides with knives for making dowel ends Max 95mm x 95mm square section with revolving Steady Max 175mm x 175mm square section without Steady Sliding guard for operator protection CE safety equipment

Year of construction: 2016, condition: excellent (used), MASA hydraulic press for slabs Year: 2016 Type: Uni 2000-600/7, 7 stations, pressing force 600 tons Moulds: 60x60 cm, max thickness 10 cm Transport system (finger car) to curing chamber 3,000 steel curing pallets; 250 galvanized control conveyors 8 curing chambers with ventilation and steam pipe Nedpfoyhlkpox Aazsdb Pallet brushing unit with filtering unit, max width 400 to 600 mm Manual packaging system REX-2000 calibrating station, 2 workstations 6-head grinding machine Kraft Energy curing system Chamfer grinding machine, 12 m drying line, 8 fans Complete Teka concrete plant (2 mixers: 750 L and 325 L) with 8-compartment storage bin with extraction belt, bucket weigher on load cell External storage silo with 50-meter belt conveyor. Reversible belt on top 8-bin storage hopper Laminating system for special tiles for bonding steel sheet under the slab Stacking device for curing chambers

Condition: used, mileage: 740,000 km, power: 338 kW (459.55 HP), first registration: 05/2001, fuel type: diesel, overall weight: 26,000 kg, emission class: euro3, Equipment: ABS, all wheel drive, MAN FE 460 !!!! DAUTEL INTERCHANGE SYSTEM - Tipper + Fifth Wheel Coupling !!!!! First registration: km 6x4 German vehicle Dautel Interchange System Tipper Bordmatic Tipper and frame completely sandblasted and repainted Fifth wheel coupling Supports Tel: Please visit our website: ---- German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/...?/... Roman We will be happy to assist you with financing or leasing. EU sale: net price upon presentation of company documents and tax/VAT number Ndsdpsy Rcfkefx Aazob VAT deposit: €2000 Our services for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Airport transfer (Munich) or train station transfer (Passau)

Condition: used, Year of construction: 2000, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 9,200 kg, Equipment: safety light barrier, We offer this used TRUMPF Trumatic 2000 R punch machine, year of construction 2000. Maximum punching capacity: 180 kN Type: 9110 Serial number: 700359 Year of manufacture: 2000 Mains supply voltage: 400 V Mains supply frequency: 50 Hz Connected load: 17 kVA Distribution voltage: 400 V Control voltage: 24 V DC Ndsdpfez Ak Dijx Aazob Fuse rating: 3 x 35 A Air pressure: 7-14 bar Machine weight: 9200 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Nedpfx Aezizkyjazedb Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: used, maximum load weight: 32,361 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2024, loading space length: 13,621 mm, loading space width: 2,524 mm, loading space height: 2,717 mm, total length: 13,886 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, SCHMITZ CARGOBULL SCB?S3 – PR.+PL. – CURTAINSIDER WITHOUT GRAPHICS – VEHICLE HISTORY * First owner * German vehicle * Video of the vehicle available upon request (interior & exterior views) General vehicle data Manufacturer: Schmitz Cargobull * Model: SCB?S3 * Type: 06VLN * Vehicle type: Semi-trailer / Curtainsider * First registration: 05/13/2024 * EC type approval: e12018/85800206-01 Body: Curtainsider * 3-axle version * Air suspension * Disc brakes External dimensions Length: 13,886 mm * Width: 2,550 mm * Height: 4,000 mm Internal dimensions Internal length: 13,621 mm * Internal width: 2,717 mm * Internal height: 2,524 mm Weights Permissible total weight: 39,000 kg * Technically permissible total mass: 39,000 kg * Permissible support load: 15,000 kg * Axle load 1: 9,000 kg * Axle load 2: 9,000 kg * Axle load 3: 9,000 kg Axles & Chassis 3 axles * Air suspension * Disc brake system Ndedpfx Ajzthr Sjazsb Tires Tire size: 385/65 R22.5 * Rim size: 22.5 × 11.75 * Load/speed index: 160J Equipment 2 storage boxes * Spare wheel holder * Small water tank * Electrical connector according to ISO 7638 (7-pin) Technical notes Operation only with towing vehicles with ISO 7638 connector * Technically possible support load: 15,000 kg Condition Ready for immediate use * Well-maintained condition EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2000 EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2000 EXPORT REGISTRATION CUSTOMS EXW IN 10 MIN. (APPROVED EXPORTER) 5 DAYS, 30 DAYS REGISTRATION, AND 17-21 DAYS AUSTRIAN REGISTRATION, EURO 1 VEHICLE RESERVATIONS ONLY VIA EMAIL VERBAL RESERVATIONS ARE NOT VALID! For sales to EU & non-EU countries, a deposit of at least €500.00 / €1,000.00 will be charged. Subject to changes, errors and prior sale! You can find more vehicles on our homepage: Sales are exclusively made according to our general terms and conditions - see homepage. Important note – Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 of the German Civil Code (BGB). Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute warranted characteristics.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: badge_tk, Smooth exterior walls, Side door Equipment: -+10°C to -20°C -GOVI 2000P -80mm insulated wall Net: €16,134.45 / Gross: €19,200.00 Article number: VF4227401718.03 Technical data: • Brand: Variant • Model: 2719 F4 • Vehicle type: Refrigerated trailer • Vehicle condition: New • First registration: without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 402 x 170 x 181 cm • External dimensions (LxWxH): 602 x 234 x 248 cm • Loading height of the floor: 59 cm • Permissible total weight: 2,700 kg • Unladen weight: 1,090 kg • Payload: 1,610 kg • Chassis: Low loader (wheels next to the body) • Tires: 165R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsionally rigid chassis for safe driving characteristics • Loading area made of 2mm aluminum diamond plate and sandwich polyester panel with 80 mm insulation • 4 stable telescopic crank supports for up to 6000kg standstill weight • Foam panels - insulation 80 mm PU core • Exterior color: white • Rear door, double-leaf with aluminum hinges • 2x swivel latch and door latch • Side door, standard on the right front, approx. 181cm, lockable with swivel latch • Rear frame and trim profiles made of special aluminum profiles, anodized for aesthetically pleasing appearance • Impact protection, diamond plate, all around on three sides • Refrigeration unit GOVI 2000 • Cooling capacity in watts at a cooling chamber temperature of -20° C and an ambient temperature of 40° C • Temperature control range from +10° C to -20° C • Air volume flow evaporator: 1100 m³/h • Completely encapsulated unit with "outdoor" housing, mounted at the front on top • Environmentally friendly, CFC-free refrigerant • Electronic automatic defrost of the evaporator • The control display is lockable and thus protected against unauthorized operation • Electronic digital thermostat for optimal control of the temperature range • 12 Volt interior lighting • Very stable V-drawbar, REINFORCED • KNOTT overrun device and parking brake • Reverse automatic • Plastic fenders • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Reinforced automatic support wheel, for safe parking of the loaded trailer, load capacity 500 kg _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Nedpfx Aaszy Drbezjdb Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale are reserved -

Condition: used, fuel type: diesel, axle configuration: 4x4, fuel: diesel, gearing type: automatic, Year of construction: 2004, From our immediately available stock of used vehicles, we offer you: Firefighting vehicle HLF 20 ALL-WHEEL DRIVE 4x4 on MB ATEGO 1328 AF General data: • First registration 03/2004 • Mileage: approx. 144,500 km • Unladen weight: 9,450 kg • Permissible total weight: 14,500 kg • New TÜV/MOT inspection Chassis: • MB 1328 AF 4x4 with 279 hp (205 kW) • Allison automatic transmission • Twin-tire rear axle Cabin: • Standard crew cabin (1:8) in RAL 3000 (fire engine red) • Mounting points for 2 compressed air breathing apparatus facing forward Superstructure: • Manufacturer: Schlingmann • HLF20 superstructure according to DIN standard • Three generously sized side equipment compartments on each side • Fold-out steps for the front and rear side equipment compartments • Mounting points for standard equipment • Mounting points for 2 additional compressed air breathing apparatus Ndsdpfxsz Dq U Is Aazob • Deployment system for 2 single-person reels Vehicle pump/fire extinguishing agent tank: • Firefighting centrifugal pump Schlingmann FPN 2000-10 • Output: 2,000 l/min at 10 bar • Water tank: 1,800 l • Foam tank: 150 l Firefighting equipment: • Fixed quick-attack hose, 50 m long, located on top • Monitor on the vehicle roof Safety and lighting • Ambient lighting on the superstructure • Pneumatic lighting mast • Rear warning device We will gladly provide you with a detailed offer and show you the vehicle in Berlin. All information is provided to the best of our knowledge and belief, without guarantee for completeness and accuracy. This advertisement does not constitute an offer, but rather information. Subject to prior sale!

Condition: used, maximum load weight: 25,900 kg, overall weight: 33,000 kg, axle configuration: 3 axles, first registration: 02/2006, total length: 13,600 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, SAMRO ST39 – ROLLER BED – BOX TRAILER – BPW – 3-AXLE ----VEHICLE HISTORY * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST ----VEHICLE EQUIPMENT Vehicle Data Manufacturer: SAMRO * Type / Variant: ST39 WGRA * Vehicle Type: Box trailer / closed box * First Registration: 11.02.2006 * Vehicle Identification Number: VK1ST39WGRA500647 * Number of Axles: 3 * Technically Permissible Total Weight: 39,000 kg * Permissible Total Weight: 33,000 kg * Length: approx. 13,600 mm * Width: approx. 2,550 mm * Height: approx. 4,000 mm Equipment 3-axle version * BPW axles * Air suspension * Disc brakes * Closed box body * Storage compartments * Tire specification: 385/55 R22.5 * Tire specification according to vehicle registration document: 385/65 R22.5 160J * ABS * Roller bed ----* EXPORT SALES ONLY WITH DEPOSIT MIN. 500 € * EXPORT SALES ONLY WITH DEPOSIT MIN. 500 € - 2000 € EXPORT REGISTRATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 15 DAYS, 30 DAYS LICENSE PLATES AND 15 DAYS AUSTRIA LICENSE PLATES EURO 1 TECHNICAL DATA SHEET VEHICLE RESERVATIONS PLEASE ONLY VIA THE E-MAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to EU and third countries, a deposit of at least 500.00 € / 1,000.00 € will be charged. Subject to changes, errors and prior sale! Ndedpfxezv Axxj Aazeb You can find more vehicles on our website. Sale is exclusively according to our general terms and conditions - see homepage. Important note - Important information: Despite careful checking of all details in our offer, it may happen that errors occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute warranted characteristics.

Condition: used, mileage: 740,000 km, power: 338 kW (459.55 HP), first registration: 05/2001, fuel type: diesel, overall weight: 26,000 kg, emission class: euro3, Equipment: ABS, all wheel drive, MAN FE 460 !!!! DAUTEL INTERCHANGE SYSTEM - Tipper + Fifth Wheel Coupling !!!!! First registration: km 6X4 German vehicle Dautel Interchange System Tipper Onboard computer Tipper and frame completely sandblasted and repainted Fifth wheel coupling Supports Tel: Visit our website: ----German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/...?/... ... Roman We will gladly take care of your financing or leasing. EU sale: net price upon presentation of company documents and tax/VAT number. VAT deposit: 2000 € Our service for you: Ndjdpey Rcf Djfx Aazob - Customs license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Transfer from Munich Airport or Passau train station

Condition: used, Year of construction: 1997, functionality: fully functional, total height: 4,000 mm, total width: 5,000 mm, total length: 5,000 mm, overall weight: 16,000 kg, ANAYAK FBZ-HV-2000 – CNC Bed Milling Machine Manufacturer: ANAYAK – Industrias Anayak S.A., Spain Model: FBZ-HV-2000 Machine Type: CNC Bed Milling Machine / Universal Bed Milling Machine Year of Manufacture: 1997 Condition: Used Technical Data • Travel X: 2,000 mm • Travel Y: 935 mm • Travel Z: 1,000 mm • Table Dimensions: 900x • Spindle Taper: ISO 50 • Spindle Speed: 60 - 3000 rpm • Control System: CNC Control HEIDENHAIN TNC 426 • Feed Rate X/Y/Z: 1 - 3000 mm/min • Rapid Traverse: 10 m/min • Universal Milling Head: Yes • Coolant System: Yes • Chip Conveyor: Yes • Electrical Connection: 50 kW Njdpsz Epz Ajfx Aazjdb • Machine Weight: 16,000 kg Documentation available ANAYAK FBZ-HV-2000 CNC Bed Milling Machine, year of manufacture 1997. Working area X 2,000 mm. Inspection possible by appointment. Sale from current location.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2019, Equipment: ABS, Langendorf Tipper First registration: 03/2019 Unladen weight: 5000 kg Lift axle Aluminum tipper body Approx. 26 cubic meters German vehicle, first owner Please visit our website: ----German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/?????/?????... Roman We will gladly take care of your financing or leasing. EU sales: net price upon presentation of company documents and tax/VAT number. VAT deposit: 2000 € Our services for you: Ndedpfsyiw S Uex Aazsb - Customs license plates - Export documents and EUR1 - Worldwide transport - Accommodation - Transfer to Munich Airport or Passau train station

Condition: like new (used), Year of construction: 2010, planing height: 200 mm, Weinig Powermat 2000 XL four-sided planer: - German manufacture - DTR CE - automatically controlled - PowerLock heads - year of production 2010 - for wet wood TECHNICAL PARAMETERS: - planer width: 300 mm - planing height: 200 mm - PowerLock heads - control from the touch panel - electronically adjustable heads - pneumatically pressed heads 1 bottom head: 18.5 kW Njdpeun Natsfx Aazedb 2 right head: 15 kW 3 left head: 15 kW 4 top head 22 kW with side cutter: 1.5 kW 5 Overhead: 18.5 kW 6 Lower head: 20 kW - heads with automatic jointing system - spindles speed: 8000 rpm - inverter-controlled feed speed: 6 - 60 m/min - six steel drawing top rollers - three rubber trailing top rollers - top feed rollers with support - six rollers in the drawing table, of which 2 milled in front of the first head - automatic central lubrication - spigot diameter: 4 x 160 and 2 x 140 mm

Condition: used, Year of construction: 2023, operating hours: 1,300 h, Yanmar VIO 50/6B Njdpfx Aajy U Tb Rozjdb Year of manufacture: 2023 1300 hours !!!!! POWERTILT !!!!! Full hydraulic quick coupler on the Powertilt 3 buckets German machine, first owner Complete hydraulic lines/connections for hammer/grapple/shear Tracks/undercarriage approx. 60-70% remaining High-flow hydraulics Operating weight approx. 4900 kg Ready for immediate use Delivery possible Financing possible Please visit our website: ----German/English/Serbian/Croatian/Bosnian/Bulgarian..... Goran German/English/????/?????..... Roman We will gladly assist you with financing or leasing. EU sale: net price upon presentation of company documents and tax/VAT number. VAT deposit: €2000 Our services for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Accommodation options - Transfer from Munich Airport or Passau train station

Condition: used, Year of construction: 2017, machine/vehicle number: LC560, Used Processing Line for small dairy products 2000 L/h Milk Reception and Initial Storage The Used Processing Line for Small Dairy Products 2000 L/h begins with a milk reception unit consisting of two Lactofreeze tanks and a receiving pump. Initially, operators channel raw milk into the tanks, where it remains chilled. As a result, the system ensures thermal stability before processing. Furthermore, this setup minimizes the bacterial load while allowing continuous transfer to the pasteurization stage. Pasteurization and Separation Next, the pasteurization phase uses a plate heat exchanger with a retention section and auxiliary systems, all rated for 2,000 liters per hour. Specifically, the pasteurizer rapidly heats and holds milk at a predefined temperature to eliminate pathogens. Then, the GEA WESTFALIA separator—rated at 3,000 L/h—performs cream separation. Simultaneously, the RANNIE homogenizer (1,000 L/h) reduces fat globules, thus enhancing emulsion stability and preventing cream rise. Fermentation and Coagulation Following thermal treatment, the milk proceeds to fermentation. Here, operators use an insulated double-wall fermentation tank with a 1,000-liter capacity and planetary agitator. Consequently, they maintain uniform bacterial activity and precise temperature control. In parallel, a 1,000-liter coagulation vat equipped with a planetary mixer initiates the curdling process. Both tanks ensure optimal protein structuring for yogurt, cheese, and cultured cream products. Ndodpfx Aaow Ahg Rozeb Cheese Processing and Draining After coagulation, the Used Processing Line for Small Dairy Products 2000 L/h continues with cheese processing. The system includes a 500-liter vat with a draining sieve and two cheese draining tables. Therefore, operators can efficiently handle large curd volumes. Moreover, these components simplify whey separation while ensuring sanitary compliance. Additionally, their design supports easy cleaning and cross-contamination prevention. Packaging Operations Once products are ready for packing, the line integrates semi-automatic and automatic solutions. First, a semi-automatic filler doses pasteurized milk into 1-liter bags. Subsequently, the yogurt cup filler automatically fills and seals 75 mm and 95 mm cups at up to 1,800 units per hour. Meanwhile, the rotary labeling machine by ETICAP (2004) applies both front and rear self-adhesive labels on cylindrical cups. Importantly, the machine ensures consistent alignment and adhesion. Date Coding, Thermal Control, and Final Packing In addition, a Videojet 1220 coder (2019) applies expiry dates onto each product via belt conveyor. Further downstream, a vacuum packaging machine handles cream and cheese portions. Thermal utilities include a 115–150 kW solid fuel boiler (2014) with dual transfer pumps. At the same time, an ice water tank (5,000 L, 2014) and a cooling unit (2018) maintain temperature consistency across the line. Laboratory and Accessories Alongside processing units, the Used Processing Line for Small Dairy Products 2000 L/h features a dedicated laboratory. Specifically, it houses analytical tools for quality control and milk analysis. Additionally, the line includes 300 plastic crates for storing and transporting yogurt cups. System Shutdown and Storage Finally, operators shut down the line in September 2023. Before dismantling, they cleaned ...

Condition: good (used), Year of construction: 2013, Ref. -No.: 10636 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC-Steuerung Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Nsdjzc D E Ispfx Aazedb Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1400 RPM Spindle Speed: 2000 RPM Table size: 1800 x 2200 mm Further information: - The control system was converted to a HEIDENHAIN 530i in 2013. - All drives were upgraded to digital. Thrust bearing replacement on the tower also renewed in 2013. - Accessories: - 3D probe - Heidenhain, large spindle support - 1x Heidenhain axis module (completely overhauled), - 1 new axis module is installed in the machine. - Newly packaged spare parts, covers from the machine. - All bearings have been replaced on the machine in recent years. - Tools and milling cutter heads are available. The machine is first-hand. The machine is still powered up and in production. The machine can be viewed by appointment.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, IKA MHD 2000/10 powder wetting and dispersing machine, capacity 2500 liters/hour, solids capacity max. 1300 liters/hour, rotor speed 4200 rpm at 50 Hz, 18.5 kW motor suitable for frequency converter 20-60 Hz, product temperature max. 135°C, operating pressure -1 to +16 bar, operating pressure double jacket max. 2.5 bar, liquid inlet DN 25, solid inlet DN 65, outlet DN 50, product contact parts stainless steel AISI 316L or AISI 316Ti9, frame and lantern piece stainless steel AISI 304, weight approx. 400 kg, used in the production of plant-based proteins (pilot plant) Nsdpfxjzu I Tfo Aazodb