Used Goudsmit Eddy Current Separator for sale (13,055)

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 1100 x 1495 mm 200 kg - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and Ijdjhp S Tropfx Am Dsih alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class "W3" (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good cleaning behavior of the filter cartridge, so that an optimal suction performance is guaranteed throughout the operation. The cleaned particles fall into a dust collection drawer from which they can then be disposed of. The powerful spiral fan ensures even with saturated Filter cartridges for a high volume flow. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: new, bore capacity in steel (diameter) 30 mm throat 270 mm bore stroke 125 mm 4 Motor output 9 speeds 70 - 2800 U/min Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore * Control panel with user-friendly, dirt and water resistant * Membrane keyboard * RPM display * Separate emergency stop button * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° * Drilling depth stop * LED machine light integrated in the drill head * V-belt cover with safety switch Iisdpsun Um Eefx Am Doh * Thick-walled steel column for high power absorption and stability * Solid, large base plate with T-slots * Execution of the entire machine Scope of delivery: - Keyless drill chuck 0 - 16 mm - T-Nuts -expectors - Operating tool - BMP 160 machine vice

Condition: new, bore capacity in steel (diameter) 30 mm throat 254 mm bore stroke 120 mm 4 Motor output 9 speeds 120 - 1810 U/min column diameter 92 mm table surface area 475 x 425 mm total power requirement 1,1 kW dimensions 915 x 450 x 1705 mm weight ca. 135 kg Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore * Control panel with user-friendly, dirt and water resistant * Membrane keyboard * RPM display * Separate emergency stop button * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° * Drilling depth stop * LED machine light integrated in the drill head * V-belt cover with safety switch * Thick-walled steel column for high power absorption and stability * Solid, large base plate with T-slots * Execution of the entire machine Scope of delivery: - Keyless drill chuck 0 - 16 mm - T-Nuts Iiodpjq Nrmrsfx Am Doh -expectors - Operating tool - BMP 160 machine vice

Condition: ready for operation (used), Year of construction: 1973, machine/vehicle number: 22123, functionality: fully functional, pressing force: 315 t, table width: 1,500 mm, table length: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Pressing force: 315 t Table width: 1,500 mm Table length: 2,500 mm Maximum working area: 883 mm MACHINE DETAILS Iedpfjz Izcwox Am Deih Dimensions: 3.0 m x 1.6 m x 4.5 m EQUIPMENT Separate hydraulic unit Control panel

Condition: ready for operation (used), functionality: fully functional, mileage: 409,922 km, power: 248 kW (337.19 HP), first registration: 03/2011, fuel type: diesel, empty load weight: 13,950 kg, maximum load weight: 13,050 kg, overall weight: 27,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, fuel: diesel, color: blue, driver cabin: day cab, gearing type: automatic, suspension: air, number of seats: 2, total length: 11,900 mm, total width: 2,600 mm, total height: 3,850 mm, loading space volume: 1,084 m³, loading space length: 9,820 mm, loading space width: 2,470 mm, loading space height: 2,410 mm, Year of construction: 2011, Equipment: ABS, AdBlue, additional headlights, air conditioning, airbag, central locking, differential lock, electric window regulation, fog lights, full service history, onboard computer, parking heater, power assisted steering, power mirror, soot filter, Model: VOLVO FM330 6x2 FRIGOBLOCK Multizone, Steering and Lift Axle, EURO 5 First registration: 07/03/2011 Mileage: 409,922 km (original) Engine power: 248 kW (330 hp) Engine displacement: 10,837 cm³ Refrigeration unit: FRIGOBLOCK Germany Type: FK 25 SL Year of manufacture: 2011 Capacity: 44.1/22.1 m³/h Charge: 8.5 kg Refrigerant: R410A Max. pressure: 42 bar M.O.P.: 4 bar, -20°C Voltage: 400 V Frequency: 50Hz Control voltage: 24V Current consumption: 24 A Additional separate batteries (total 4x batteries) 4x cooling units in the refrigerated box Interior lighting in refrigerated box 2x external Frigoblock system controls Switch for mains/generator power Zepro tail lift with remote control and 2 additional control panels Lifting capacity: 2,500 kg Air conditioning 2x fully adjustable air-suspended seats Electric windows Electrically adjustable exterior mirrors Speed limiter Sun visor Fog lights High beam Hazard warning lights Storage box VDO tachograph Work lights front and rear TCS Emission standard: EURO 5 AdBlue Wheel configuration: 6x2 Differential lock Wheelbase axle 1 to 2: Wheelbase axle 2 to 3: Tire size front (axle 1): 315/80R22.5 Tire size rear (axle 2): 315/80R22.5 Tire size rear (axle 3): 315/80R22.5 Air suspension Steering axle + lift axle Unladen weight: 13,950 kg Payload: 13,050 kg Gross vehicle weight: 27,000 kg Isdpfjz Hv Rgsx Am Doih Vehicle overall dimensions (L x H x W): 1,190 cm x 385 cm x 260 cm Body dimensions (external or internal, L x H x W): 982 cm x 241 cm x 247 cm New TÜV and emissions test available by arrangement and surcharge! You are also welcome to contact us for further information and photos via WhatsApp, Telegram, Viber, and Signal. German (Deutsch): Wir sprechen Deutsch und Englisch, aber Sie können uns gerne in Ihrer Sprache eine Nachricht schicken! English: We speak German and English, but feel free to send us a message in your language! Español: Hablamos alemán e inglés, pero no dude en enviarnos un mensaje en su idioma. Português: Falamos alemão e inglês, mas fique à vontade para nos enviar uma mensagem no seu idioma! Français: Nous parlons allemand et anglais, mais n'hésitez pas à nous envoyer un message dans votre langue ! Italiano: Parliamo tedesco e inglese, ma non esitate a inviarci un messaggio nella vostra lingua! Русский: Мы говорим на немецком и английском, но вы можете написать нам сообщение на своем языке! Trade-in possible! Price is net! We can deliver your vehicle directly to the ports of Hamburg, Kiel, Bremerhaven/Cuxhaven, Lübeck in Germany, as well as Antwerp/Belgium and Amsterdam. Worldwide shipping available! Export license plates available on request! We support you with export, original data confirmation for country homologation, supplier's declaration, preparation of export documents, and customs number plate procurement if required. Viewing and test drive possible at any time, including weekends, by prior telephone arrangement! Disclaimer: The buyer is obliged to independently verify the condition, dimensions, and equipment of the goods/vehicles. All information provided without guarantee. Subject to change, prior sale, and errors.

Condition: good (used), functionality: fully functional, power: 110 kW (149.56 HP), machine/vehicle number: B-01526-120, for sale as parts or as a complete installation feed hopper conveyor belt Andrin eddy-current separator Iijdpfx Aexhgywom Dsh extraction control cabinet etc.

Condition: like new (used), Year of construction: 2003, operating hours: 2,032 h, Cold Jet PPAH-325B Dry Ice Pelletizer / Dry Ice Production Machine The machine is available from December. Isdpfx Aez Adwiom Dsih Cold Jet PPAH-325B – Industrial Dry Ice Production Machine Professional industrial equipment designed for the production of dry ice. The machine is built as a heavy-duty industrial unit with an integrated hydraulic system, control panel, and CO₂ pressure monitoring. Machine details: Manufacturer: Cold Jet Model: PPAH-325B Application: Dry ice production Operating hours: 2,032.8 hours Integrated hydraulic power unit Electronic HMI/control panel Emergency stop Hydraulic pressure monitoring Chamber pressure monitoring Injection pressure monitoring Vapor CO₂ pressure monitoring Liquid CO₂ pressure monitoring Separate vapor and liquid CO₂ controls Heavy-duty industrial steel frame The machine is currently located in the Netherlands. The PPAH-325B is a professional industrial machine suitable for companies involved in dry ice production and applications requiring their own dry ice supply. Worldwide delivery can be arranged. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: ready for operation (used), machine/vehicle number: 90-58-07, functionality: fully functional, planing width: 240 mm, overall weight: 4,200 kg, spindle diameter: 50 mm, planing height: 240 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. planing width: 240 mm Max. planing height: 120 mm Infeed table length: 1,440 mm Number of spindles: 6 pcs. Spindle diameter: 50 mm Planer shaft speed: 6,000 rpm Max. planer block diameter: 200 mm Spindle 1 Spindle position: Bottom Motor power: 7.5 kW Spindle 2 Spindle position: Right Motor power: 7.5 kW Spindle 3 Iiodpfx Amjz Ni Edo Deh Spindle position: Left Motor power: 15 kW Spindle 4 Spindle position: Top Motor power: 15 kW Spindle 5 Spindle position: Top Motor power: 11 kW Spindle 6 Spindle position: Bottom Motor power: 15 kW Conveyor motor power: 5.5 kW Conveyor drive: Cardan drive Feed speed: Manual Min. feed speed: 5 m/min Max. feed speed: 35 m/min Feed speed control: Stepless Diameter of feed rollers: 1,400 mm Diameter of extraction nozzle: 150 mm MACHINE DETAILS Voltage: 400 V Current consumption: 128 A Power: 80 kW Dimensions & Weight Dimensions (L x W x H): 1,900 x 3,900 x 1,800 mm Weight: 4,200 kg Transport packages: 1 pc. EQUIPMENT CE marking

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Charging voltage: 80 V Charging current: 120 A Suitable battery capacity: 600–900 Ah MACHINE DETAILS Year of manufacture: 2026 Mains connection: 400 V / 16 A Dimensions (L × W × H): 600 × 600 × 600 mm Weight: 70 kg EQUIPMENT Rema connector: 320 A Original packaging All dimensions are approximate. No guarantee is given for typographical or measurement errors. Ijdpfxez R Sguo Am Doih Collection conditions: * Side loading up to 6 tonnes is possible with a large forklift truck on site. Loading is at your own risk. * Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tonnes and up to a width of 230 cm. * Collection is only possible after receipt of the payment confirmation by email. * Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. * In case of delayed collection, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 8020

Condition: excellent (used), functionality: fully functional, mileage: 501,516 km, power: 248 kW (337.19 HP), first registration: 06/2010, fuel type: diesel, empty load weight: 14,000 kg, maximum load weight: 13,000 kg, overall weight: 27,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 6,000 mm, next inspection (TÜV): 11/2026, fuel: diesel, brakes: retarder, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, loading space volume: 58 m³, loading space length: 9,800 mm, loading space width: 2,450 mm, loading space height: 2,480 mm, Year of construction: 2010, operation weight: 27,000 kg, Equipment: ABS, AdBlue, additional headlights, air conditioning, airbag, central locking, cruise control, differential lock, fog lights, hydraulics, low noise, onboard computer, parking heater, power assisted steering, retarder, seat heater, soot filter, spoiler, tail-lift, trailer coupling, Model: Volvo FM330 6x2 FRIGOBLOCK Multizone with Steering and Lift Axle First registration: 09.07.2009 Mileage: 501,516 km (original) Engine power: 248 kW (337 HP) Displacement: 10,837 cm³ Refrigeration unit: FRIGOBLOCK Germany Type: FK 25 SL Year of manufacture: 2010 Displacement: 44.1/22.1 cm³ Refrigerant quantity: 8.5 kg Refrigerant: R410A Max. pressure: 42 bar M.O.P.: 4 bar, -20°C Voltage: 400 V Frequency: 50Hz Control voltage: 24V Current consumption: 24 A V-belt 1: XPA1630 Lw V-belt 2: SPZ 1420 Lw Dividable compartments with adjustable temperatures Width left compartment: 840 cm Width middle compartment: 755 cm Width right compartment: 835 cm Additional separate batteries (total 4 batteries) Isdpfx Aoztfg Hsm Deih 4 x refrigeration units in the insulated body Refrigerated body interior lighting 2 x external Frigoblock system controllers Switch for mains/generator power Zepro tail lift with remote control and 2 additional control units Lifting capacity: 2,500 kg Air conditioning 2 x fully adjustable air-suspended seats Electric windows Electrically adjustable exterior mirrors Speed limiter Sun visor Fog lights High beam Warning beacon Storage box VDO tachograph Work lights front and rear TCS (Traction Control System) Emission class: EURO 5 Axle configuration: 6x2 Differential lock Wheelbase axle 1 and 2: 6,000 mm Wheelbase axle 2 and 3: 1,400 mm Tyre size axle 1 (front): 315/80R22.5 Tyre size axle 2 (rear): 315/80R22.5 Tyre size axle 3 (rear): 315/80R22.5 Air suspension Steering and lift axle Unladen weight: 14,000 kg Payload: 13,000 kg Max. axle load: 16,000 kg Gross vehicle weight rating: 27,000 kg Overall vehicle dimensions (approx. L x W x H): 12.15 m x 2.6 m x 3.95 m Box interior dimensions (approx. L x W x H): 9.8 m x 2.48 m x 2.40 m With new TÜV and emissions inspection by arrangement, additional charge applies! You are welcome to contact us for further information or pictures via WhatsApp. Trade-in possible! Delivery available on request! Price is net! We can deliver your vehicle directly to the ports of Hamburg, Kiel, Bremerhaven/Cuxhaven, Lübeck in Germany or Antwerp/Belgium and Amsterdam. We can arrange worldwide shipping for your vehicle! Export license plates available on request! We assist you with export, original technical confirmation for country homologation, supplier’s declaration, preparation of export documents and customs license plate fabrication if needed. Inspection and test drive can be arranged at any time, including weekends, by prior telephone appointment! Disclaimer: The buyer is obliged to independently verify the condition, dimensions, and features of the goods/vehicles. All information is provided without guarantee. Subject to modifications, prior sale, and errors.

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 306533, functionality: fully functional, cutting height (max.): 350 mm, cutting width (max.): 610 mm, overall weight: 550 kg, saw band length: 4,700 mm, TECHNICAL DETAILS Saw band length: 4,700 mm Tool dimensions: 13 × 0.65 × 24 TPI Guide roller diameter: 630 mm Cutting height: 350 mm Cutting width without rip fence: approx. 610 mm Cutting width with rip fence: 150 mm Loading height: 1,065 mm Iiedpfsz Im Sksx Am Doh Cutting speed: 10–100 m/min Table travel: approx. 600 mm Table feed rate: 0.03–0.3 m/min MACHINE DETAILS Dust extraction connection diameter: 1 × Ø 120 mm + 1 × Ø 100 mm Required flow velocity: min. 25 m/s Required volume flow: 1,725 m³/h Operating voltage: 400 V / 50 Hz Type of current: 3 × 400 V Fuse rating: max. 16 A Minimum conductor cross-section: 1.5 mm² Motor power: 0.75 kW Dimensions & Weight Dimensions (L x W x H): approx. 1,850 x 1,200 x 2,300 mm Machine weight: approx. 550 kg

Condition: ready for operation (used), functionality: fully functional, operating hours: 17,508 h, Year of construction: 2018, machine/vehicle number: S0721Q0022, laser power: 500 W, overall weight: 4,300 kg, construction height: 400 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Build volume: Ø 300 × H 400 mm Build rate: 5–60 cm³/h Layer thickness: 20–150 µm Laser power: 500 W Beam diameter: 100–500 µm O₂ concentration: 100 ppm Exposure speed in the powder bed: 3 m/s Preheating of the substrate plate: 200 °C MACHINE DETAILS Voltage: 400 V Current: 32 A Frequency: 50/60 Hz Dimensions & Weight Dimensions incl. filter system: 3,385 × 1,435 × 2,225 mm Weight incl. filter system: 4,300 kg Laser operating hours “Laser Beam on”: 17,508 h (as of 11.04.2023) EQUIPMENT Filter system Zirox sensor Single laser Powder Bed Monitoring Condition Monitoring Performance Monitoring Protective gas operation with nitrogen or argon Iiedpfxoz Irhke Am Djh 4 dosing containers 1 build cylinder 1 overflow container Various spare parts, including protective glass Manuals All axes professionally secured for transport The following materials can be processed: Weldable metals in powder form, e.g. stainless steels, tool steels, aluminum-, nickel-based, cobalt-chromium, copper, titanium and precious metal alloys. Last processed material: AlSi10Mg

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent Iodpfx Amsz Hngmj Dsih • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 13,305 h, travel distance X-axis: 635 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 20, number of axes: 3, This 3-axis DECKEL MAHO DMC 635 V was manufactured in 2005. It features a HEIDENHAIN iTNC 530 control unit and a 20-position tool changer, providing efficient machining capabilities. With a machine hour count of 39,396 hours, this vertical machining centre represents an opportunity for high-quality machining tasks. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 635 V machine we have for sale. Contact us for further details. Iisdpfxsz Du S Rj Am Dsh - Handwheel: Separate handwheel control- Machine Hours: 39,396 h - Programme Run Time: 13,305 h - Apparent Power: 20 kVA- Nominal Current: 28 A Jn max / 35 A- Voltage: 400 V / 230 V / 24 V- Frequency: 50 Hz- Known Defect: Fault with the clamping spring in the spindle- Not included: Chip Conveyor

Condition: new, STRUERS Metallographic Cutting Machine Struers Labotom-5 NEW / unused – Year of manufacture 2025 Complete system with base cabinet, recirculating cooling unit and accessories For sale is a new, unused metallographic cutting machine from the manufacturer Struers including base cabinet, recirculating cooling unit and accessories. The Struers Labotom-5 is suitable for manual sectioning of material samples for metallographic sample preparation in laboratories, industry and quality assurance. The system has not yet been assembled or put into operation and is in its stored, shipping condition. Technical data: Manufacturer: Struers Type: Labotom-5 Article number: Year of manufacture: 2025 Type of equipment: Metallographic cutting machine Operation / Feed: Manual Electrical data: Mains connection: 3 × 380–415 V / 50 Hz Motor power S3 60 %: 2.2 kW Motor power S3 15 %: 3.2 kW Rated current: 5.3 A Maximum current draw: 10.6 A Cutting wheel: Diameter: 250 mm Inner hole diameter: 32 mm Speed: 2,910 rpm at 50 Hz Cutting capacity according to manufacturer: Iiedpfx Amsz Szdde Doh Maximum diameter: 90 mm Height × Length: 42 × 120 mm Cutting length: 135 mm Cutting table: Width: 316 mm Depth: 225 mm T-slots: 10 mm Manual feed Dimensions and weight of the Labotom-5: Width main unit: 700 mm Width including handle and rinsing gun: 960 mm Depth: 760 mm Height with closed cover: 530 mm Height with open cover: 900 mm Equipment weight: 75 kg Recirculating cooling unit: Struers recirculating cooling unit System 3 Article number: Coolant tank: 50 liters Including related cooling components according to parts list and images Equipment: Closed cutting chamber with safety cover Manual cutting feed Cutting table with T-slots Rinsing gun Coolant supply Base cabinet / table Separate recirculating cooling unit with 50-liter tank Clamping tools and service kit according to scope of delivery Application areas: Metallography Material testing Sample preparation Quality assurance Research and development Industrial laboratory applications Scope of delivery: 1 × Struers Labotom-5 cutting machine – Art.-No. × Recirculating cooling unit System 3, 50-liter tank – Art.-No. × Base Plate 10 mm Left – Art.-No. × Base Plate 12 Left – Art.-No. × Table unit / Base cabinet – Art.-No. × Service kit Labotom-5 – Art.-No. 16042999 Further accessories, packaging and documents documented in the original photos, according to the illustrated delivery condition. Condition: NEW / unused Year of manufacture 2025 Not yet assembled or put into operation Main unit packed securely in a wooden crate for transport Base cabinet packed on a pallet and protected Further accessories packed separately No documented functional test The system has not yet been assembled and is in storage. Assembly and commissioning are not part of this offer and must be organized independently by the buyer. The illustration of the fully assembled machine is an EXAMPLE. The original photos show the actual delivery condition. Scope of delivery according to description and original photos. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: new, mileage: 1 km, power: 265 kW (360.30 HP), fuel type: diesel, tire size: 13R22.5, axle configuration: 4x4, wheelbase: 4,200 mm, fuel: diesel, fuel tank capacity: 290 l, color: white, gearing type: mechanical, emission class: euro3, suspension: steel, loading space volume: 12,000 m³, Equipment: air conditioning, onboard computer, tachograph, = Additional options and accessories = - 1 fuel tank - ADR Iiodpfxjz I Upko Am Deh - Halogen headlights - Multifunction steering wheel - PTO - Spare wheel holder - Sun visor - Tool box = Remarks = Engels Mercedes-Benz Arocs 2136 A 4x4 Fuel Tanker | 12,000L | Euro 3 The Mercedes-Benz Arocs 2136 A 4x4 Fuel Tanker is configured for professional fuel distribution in demanding on- and off-road environments. Its permanent 4x4 drivetrain, heavy-duty Grounder chassis and 12,000-litre tanker body make it a dependable solution for mining, construction, infrastructure, energy and remote projects. Key Highlights - Mercedes-Benz Arocs 2136 A 4x4 - Mercedes-Benz OM460 12.8L Euro 3 engine - 360 hp (265 kW) / 1,800 Nm - Mercedes-Benz G 260-16 manual transmission - Permanent 4x4 all-wheel drive - N3G Grounder off-road specification - 12,000-litre fuel tanker - Two separate 6,000-litre compartments - Hydraulic fuel pump, approx. 400-500 L/min - Integrated fuel metering system - 30-metre fuel hose reel - Factory Mercedes-Benz PTO - Hot-climate and dust-protection package - ADR Type AT Built for Professional Fuel Distribution The tanker uses heavy-duty steel construction with internal anti-surge baffles for improved stability during transport. Fuel can be discharged by hydraulic pump or gravity, while the integrated metering system and 30-metre hose support controlled refuelling of machinery, generators and project vehicles. The permanent 4x4 drivetrain, differential locks, reinforced suspension and increased ground clearance support reliable operation on mining roads, construction sites and remote project locations. Applications - Mining and quarry operations - Construction and infrastructure projects - Oil, gas and energy operations - Machinery and generator refuelling - Remote-site fuel supply Technical Specifications Vehicle: Mercedes-Benz Arocs 2136 A 4x4 Engine: OM460 Euro 3 Power: 360 hp / 265 kW Torque: 1,800 Nm Transmission: G 260-16 manual GVW: 21,000 kg Wheelbase: 4,200 mm Tank: 12,000 L / 2 x 6,000 L Pump: 400-500 L/min @ 5-6 bar Cab: ClassicSpace M-Cab Classification: N3G / ADR Type AT Why Schaften Automotive? Schaften Automotive specialises in supplying factory-new Mercedes-Benz, MAN, IVECO and Scania trucks for international markets. We support customers with vehicle sourcing, export documentation, custom body solutions, international transport and worldwide delivery. With extensive experience in heavy-duty, construction, mining and transport vehicles, we provide complete truck solutions for customers across Africa, the Middle East and other export markets. Contact our team for current availability, export options and worldwide delivery. = More information = General information Year of construction: 2026 Technical information Number of cylinders: 6 Engine capacity: 12.800 cc Axle 1: Tyre size: 13R22.5; Brakes: drum brakes; Suspension: leaf suspension Engine type: Mercedes Benz in-line Financial information Selling price: € 144.900, US$ 162.200 Other information Availability: in stock Engine type: in-line 1st tank section volume: 6000 2nd tank section volume: 6000 Number of tank sections: 2

Condition: used, CTS Temperature Shock Test Chamber Type: TSS-70/350-A Year of manufacture: 10/2017 Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS GmbH (Clima Temperatur Systeme), model TSS-70/350-A. The device is suitable for temperature shock tests and cyclic temperature tests in industry, research, development, and quality assurance. Areas of application: Material testing Aging tests Electronics and component testing Temperature cycling and shock tests Automotive and quality testing Technical data: Manufacturer: CTS GmbH Type: TSS-70/350-A Design: Shock test / Temperature shock test chamber Temperature ranges: Hot chamber: +50°C to +220°C Cold chamber: -70°C to +100°C Electrical data: Rated voltage: 400 V, 3/N, 50 Hz Rated power: 19.8 kW Rated current: 46.5 A Refrigeration system: Pre-cooling stage: R452A, 7.2 kg Cooling stage: R23, 2.8 kg / 11.0 bar CO₂ equivalent: 15.41 t / 41.59 t GWP: 2140 / 14800 Water-cooled Pressure data / Protection class: Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Protection class: IP 54 Equipment / Features: CTS touchscreen control panel Microprocessor-controlled regulation and monitoring system Iijdpfxoy H Hk Ae Am Doh Program operation Digital setpoint and actual value display 2-zone system with hot and cold chamber Trolley system for rapid temperature shock testing Viewing window in the door Integrated control cabinet Water connections for cooling water available Technical design: Hot and cold chambers are separated Trolley system for rapid temperature change Test chamber made of stainless steel Robust industrial design Connections for cooling water supply and cooling water return available Connection type according to documents: CEE 63A Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Documentation: Declaration of conformity available Test certificates available Operating manual available Wiring diagram, piping diagram, and installation plan available Spare parts list and quick guide available For your security as a buyer: The following points can be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Condition: used Optical condition see pictures Scope of delivery: CTS Temperature Shock Test Chamber TSS-70/350-A Documentation as available Note: The sale is of a used industrial device. An inspection by arrangement is possible and recommended. Loading and transport can be arranged by agreement. (Changes, prior sale, and errors in the technical data are subject to change!) We will gladly answer any further questions by telephone or message.

Condition: used, CTS Type: TSS-70/350-A Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component testing Temperature shock and cycle temperature tests Technical data: Type: TSS-70/350-A Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Pre-cooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Equipment / Features: CTS control panel with touch display Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display 2-zone system (hot and cold chamber) Automatic carriage for shock tests Technical design: Hot and cold chamber separated Carriage system for rapid temperature change Test chamber made of stainless steel Insert shelf / grating Viewing window in the door Water cooling connections available Control cabinet integrated Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Other data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Iijdpjy Hkgbefx Am Deh Condition: used Scope of delivery: see pictures (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, EA Elektro-Automatik Bidirectional 120 kW DC high-power rack system EA Rack 24 RU with 4x PSB 11000-80 4x 30 kW / 0–1000 V DC / 0–80 A Bidirectional power supply with energy feedback For sale is a used high-power rack system from EA Elektro-Automatik with four bidirectional DC power supplies PSB 11000-80. Iiodszyltgspfx Am Dsh The system can be used as a programmable DC power supply as well as a feedback electronic load and is particularly suitable for high-voltage test benches, battery and energy storage tests, power electronics, automotive, research and development. Technical data: Manufacturer: EA Elektro-Automatik GmbH & Co. KG Rack: EA Rack 24 RU for 4x PSB/ELR 10000 4U Series Rack item no.: 09114762 Number of power modules: 4 Power modules: 4x EA PSB 11000-80 Voltage range per module: 0–1000 V DC Current range per module: 0–80 A Power per module: 30 kW Installed total rack power: max. 120 kW Rack mains connection according to nameplate: 3x 400 V AC L1/L2/L3/PE Rated current: 3x 192 A Frequency: 45–65 Hz Operating mode: Continuous P-max: 120 kW PSB 11000-80: Bidirectional DC power supply Power source and electronic load in one device Energy-feedback operation Efficiency source / sink: up to approx. 95.8% Adjustable resistance range per PSB 11000-80: 0.4–650 ohms Output capacitance: 200 µF Equipment: 4x EA PSB 11000-80 EA 24 RU industrial rack Common DC high-current busbars Master-Slave bus / Share-Bus Color touch displays USB interfaces Ethernet communication Bender LINETRAXX VMD460 Separate protection of the power modules Main switch Emergency stop Touch protection of the DC busbars Protective conductor and power distribution Master-Slave system: The power modules are connected to form a multi-device system via master-slave and share bus. The common DC power distribution is carried out via touch-protected copper busbars. Application areas: Battery and accumulator testing High-voltage test benches E-mobility / Automotive Energy storage testing Power electronics DC networks and DC components Research & Development Industrial testing and test systems Condition: Used Optical condition according to pictures The devices can be switched on and the displays are active. A final power and function test is not documented. Scope of delivery: 1x EA Elektro-Automatik 24 RU rack 4x EA PSB 11000-80 Integrated power, protection and monitoring technology Scope of delivery according to description and pictures Transport: Transport by freight forwarder. Dimensions (L × W × H): approx. 1,050 × 610 × 1,400 mm Weight: approx. 400 kg Freight shipping possible. Changes, errors and prior sale are subject to change. We will be happy to answer any further questions by telephone.

Condition: used, Year of construction: 2019, Overview This BORTOLINKEMO MA88/2 is an automatic partition inserter, built in Italy in 2019. It places cardboard partitions into cases on the packaging line, so that bottles travel separated and protected. Iiodpfx Aez Rvpxsm Doh The machine runs at up to 40 cycles per minute and was used in a winery. It is still installed and can be visited by appointment. Technical data - Manufacturer: BORTOLINKEMO - Model: MA88/2 - Year of manufacture: 2019 - Machine type: automatic partition inserter for cases - Output: up to 40 cycles per minute - Power supply: 400 V, 3 phases + PE, 50 Hz - Full load current: 12 A - CE marked Equipment - Partition magazine and insertion head in the upper housing - Case infeed and outfeed on roller conveyors - Operator control box with push buttons and emergency stop - Separate electrical control cabinet - Machine frame with transparent safety guarding and signal tower - Electrical diagrams and documentation available Condition Used machine from 2019, still installed. Can be inspected on site by appointment. Availability Available immediately. Location: France. Sold EXW; dismantling and truck loading are not included.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 600 kg, New separator bucket with 4 rollers Ideal for excavators from 7 tons upwards. Iisdpfxszltd De Am Doh

Condition: reconditioned (used), Manufacturer: Provisur / Beehive Model: RSDD-04 Type: Separator Dimensions: 2150 x 700 x 1650 mm Power: 21 kW Power supply: 400V 50Hz 3N Sieve hole diameter: 1 mm Iiodpoy Akhdofx Am Deh Material: Acid-resistant stainless steel Machine renovated and ready to work.

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, rotational speed (max.): 3,520 rpm, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, Used, very good condition Westfalia SA7-01-576 Separator, year of construction 1977. Packed in wooden crate to IPPC standard, ready to be shipped. - Brand new Time control box with Burkert valves and automatic controls - Performance 500 - 3.000 Ltr - self-cleaning - Motor 4 kw, 380V / 50 Hz - Start-switch including phase changer and emergency stop function - with Tools, Instruction Manual and Spare part list - Made in Germany Iiedpfszryq Rjx Am Deh If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Machinetype: Shear / Bar shear Manufacturer: Peddinghaus YOM: 2001 - Rebuild 2011 by Schubert Controls: Siemens S7-300 PLC with 8" MP277 touch panel Shearing force: 2000kN Strokes per minute: 48 Max. Diameter: 63mm Automatic length adjustment Driven material feed table - 7m long Main drive: 30kW Iodpfszp Nuyex Am Dsih Total weight: aprox. 9tons Includes large collection of knives

Condition: used, volume flow: 7,500 m³/h, Oil mist extractor for CNC machines, Donaldson Torit brand filter separator. The unit is designed for filtration of oil mist (emulsions as well as pure oil), vapors and fumes generated by various metal cutting processes. Filtration efficiency reaches 99.97% Isdpfsxd Ry Hjx Am Dsih Model: DMC-D2 Fan power: 7.5 kW Capacity: 7,500 m3/h Filtration area: 40.8 m2 Filter cartridges in very good condition. Stock no.: 1043