Used Hawe Central Lubrication for sale (11,017)

Condition: refurbished (used), functionality: fully functional, Year of construction: 2024, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680 kg Overhauled: 11/2024 by Wiemers AG General Information / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / Working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional modifications/upgrades to the original machine performed: - External stroke adjustment - New, machine-independent, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety door with monitoring (integrated in the emergency circuit) - Machine enclosure below safety door with chip protection and tool storage area - Electrical sensing of clamping jaws (tool removal monitoring to prevent unintended retraction of the broaching bridge) Nlodpfx Aasw Ighiszjg - Coolant swing system with solenoid valve operated during swing motion (for switching on coolant before broaching stroke – optical flow control ensures lubrication, no dry cutting!) - Routing of electrical cables in protective steel conduits - Heavy-duty control cabinet mounting for machine components - Additional oil-proof drip tray on the control cabinet - Three-sided closed splash guard cabin (W = 960 x D = 450 x H = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel with durable labeling - 4 central lubrication points for trapezoidal spindle drive Remarks: The machine has been completely overhauled, the machine body fully refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, solenoid valve, and drain tap), including the coolant/lubrication swing system, is new - The clamping jaws are new - Complete electrical system (control cabinet) is new - All sheet metal and enclosures are new - The following components have been overhauled and re-used: - Machine base - Machine column - Machine table with table insert - Broaching bridge (clamping jaws new) - Gear wheels - Electric motor (new brake, new bearings) The machine is stored in our warehouse and can be inspected under power. The attached images are original photos of the machine. The machine is CE marked. The CE marking corresponds to the status as of 1998 (first overhaul).

Condition: like new (used), Kunzmann WF 7/3 Nsdpfxjzy Uh To Aazslg Tool milling machine Kunzmann WF7/3 with Heidenhain TNC 124 control, manufactured in 1997, in good CONDITION. CE compliant!! The machine comes from the vocational school of the HWK Augsburg and, according to the master craftsman, has approximately 300 operating hours. Technical data: Year of manufacture: 1997 Fixed angular table Clamping slots: 6 Slot width: 14 H 7 Slot spacing: 63 mm Maximum load: 300 kg Spindle speeds S I: 1 – 1125 min-1 Spindle speeds S II: 1126 – 4500 min-1 Feed rate (potentiometer 100%): longitudinal and transverse 0 – 2000 mm/min. Rapid traverse: longitudinal and transverse 5000 mm/min. Feed rate: vertical 0 – 2000 mm/min. Rapid traverse: vertical 4000 mm/min. Travel distances X/Y/Z: 600/400/400 mm Vertical and horizontal quill - SK40 Hydraulic clamping system Weight: approx. 2000 kg Dimensions: approx. 2 x 2 x 2 m Main drive motor: 7.5 kW Accessories and equipment: Heidenhain TNC 124 control Hydraulic chuck, vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, operating manual for the control unit and programming examples Handwheels Coolant system About the machine: Offered is a tool milling machine Kunzmann WF7/3 with a Heidenhain TNC 124 control. This universal milling machine is in very good original condition. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site under power. You can find more milling machines from well-known manufacturers on our website.

Condition: used, Year of construction: 2011, operating hours: 12,390 h, KOMATSU WA250-6 wheel loader with mulching grapple and folding bucket, high-lift bucket, and automatic climate control. FOUR-WHEEL DRIVE Year of manufacture: 2011 Operating hours: 12,389 Power (kW / hp): 104 / 141 Nledpfxjzuvqrj Aazsg Engine displacement: 6,690 cm³ Operating weight: 11,500 kg Gross vehicle weight (GVW): 13,800 kg Load capacity: 4,100 kg Attachments: Mulching grapple / folding bucket High-lift bucket Bucket volume: 2 m³ Additional equipment: Automatic climate control Heater Reversing fan Rearview camera CD radio Comfort seat Automatic / torque converter transmission Central lubrication system Solid rubber tires for landfill use - German machine, always well-maintained / all servicing done by a specialist workshop!! - First owner! - Ready for operation! Errors and prior sale excepted! = Further information = Year of manufacture: 2011

Condition: good (used), A. COSTA PUMA/2/75 – 2 x 55 kW TWO-ARBOR MULTI-SAW For sale: a professional Italian two-arbor multi-saw from A. COSTA, model PUMA/2/75. This machine is designed for longitudinal resawing of wooden elements. It features a heavy-duty, industrial design with two saw arbors and a crawler feed system. MACHINE SPECIFICATIONS: • Manufacturer: A. COSTA S.p.A. – Marano Vicentino, Italy • Model: PUMA/2/75 Njdpoz D Nqbsfx Aazjlg • Machine number: 90EC3 • Year of manufacture: 1990 • Type: two-arbor multi-saw • Power supply: 380 V • Frequency: 50 Hz • Rated power (from nameplate): 114 kW • Rated current (from nameplate): 217 A • Main motors: 2 x 55 kW • Feed motor: 4 kW • Maximum cutting height: 160 mm • Two saw arbors • Crawler feed system • Material pressure rollers • Adjustment of working unit settings • Kickback protection • Central lubrication system • Electric control panel • Cutting width: 350 mm The machine's design allows for efficient resawing of wood using two saw units – a lower and an upper arbor. NAMEPLATE: A. COSTA S.p.A. Marano Vicentino – Italy MODEL: PUMA/2/75 NO.: 90EC3 YEAR: 1990 POWER: 114 kW CURRENT: 217 A VOLTAGE: 380 V FREQUENCY: 50 Hz USED MACHINE – CONDITION AS SHOWN IN THE PHOTOS. The machine is preserved in its original, heavy-duty industrial construction. It is sold in the condition and configuration shown in the photos. Due to the machine's size and weight, on-site pickup and transport by the buyer are preferred. The machine can be inspected before purchase.

Condition: like new (used), functionality: fully functional, Tool milling machine Deckel FP 4 MK Type 2203 Nljdpfx Ajzvxlhjazsg Equipped with a hydraulic tool clamping system and central lubrication.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Technical details: Clamping table surface: 300 x 700 mm Electro-magnetic chuck: 300 x 600 mm Maximum travel: 640 mm x 320 mm Max. distance spindle center / table: 520 mm Max. workpiece weight*: 200 kg Grinding wheel: 300 x 30 x 75 mm Table speed, hydraulic: 2 - 18 m/min Automatic cross feed: 0.5 – 10 mm/stroke Rapid traverse, cross: 990 mm/min Graduation on handwheel: 0.02 mm Automatic vertical feed: 0.01 / 0.1 mm Rapid traverse, vertical: 360 mm/min Graduation on handwheel: 0.01 mm Grinding spindle motor: 4.0 kW Spindle speed: 1,440 rpm Hydraulic pump motor: 1.5 kW Length x width x height: 2,000 x 1,650 x 1,850 mm Weight approx.: 1,400 kg Surface Grinding Machine Bernardo FSM 3060 AHD 2-axis digital readout ES-12 H with LCD display Control with touch operation Electronic handwheel Grinding wheel Wheel flange LED work light Electro-magnetic chuck Balancing stand Balancing arbor Nedpfx Ajyut A Teazslg Protective covers Demagnetizing unit Coolant system Diamond dresser Machine mounts Central lubrication Operating tools

Condition: good (used), Year of construction: 2013, functionality: fully functional, The FAMAR TANDEM 400 is a powerful CNC vertical lathe with two independent machining stations. The machine is equipped with driven tools, automatic workpiece loading and unloading, a measuring probe, high-pressure coolant, and coolant filtration. The tandem design enables efficient series production and the simultaneous use of two separate machining stations. Main technical parameters: Standard chuck diameter: 400 mm Maximum chuck diameter: 400 mm Nominal turning diameter: 300 mm Maximum turning diameter: 400 mm Maximum turning length: 480 mm Maximum turning length: 300 mm Number of main spindles: 2 Max. main spindle speed: 4,000 rpm Rated power of main electric spindle: 49.6 kW Rated torque: 458 Nm S6 40% power: 61.7 kW S6 40% torque: 724 Nm Machine dimensions: approx. 3,900 × 3,500 × 3,200 mm Machine weight: approx. 21,000 kg Electrical connection: 400 V / 50 Hz Installed power: 90 kW CE compliant Tooling equipment UTTUM50 – turret for driven tools, size 50 Max. driven tool speed: 8,000 rpm Torque: 100 Nm Power: 15.6 kW UTDUM50 – turret tool disk Size VDI 50 12 tool positions Direct tool drive PPP40 – preparation for 2 hydraulic circuits For special workpiece clamping Piping and valves Control via M-functions Automation TRPAPE20 – 1 automatic circulating pallet conveyor for loading and unloading workpieces A single conveyor system for both workpiece infeed and outfeed Circulating pallet magazine Belt design Pallet occupancy monitoring system Pallet sorting system Working height approx. 950 mm Automatic workpiece loading and unloading via the machine TRPNVBPTE4 – Shuttle system with rotary station Loading/unloading shuttle system Integrated rotary station Including 1 set of jaws for the workpiece AZGRRB500 – set of jaws for Shuttle rotary station MPDM2 – automatic measuring probe Automatic workpiece measurement Coolant, filtration, and chip removal LBCVTT50 – belt conveyor for chips Separate conveyor for chip removal Particularly suitable for short chips, such as cast iron, brass, and some aluminum alloys LBVA760 – coolant tank Volume 760 l LBAP10 – high-pressure pump Pressure 20 bar Internal tool cooling LBFTC – paper filter for coolant Suitable for cast iron and aluminum Filtration of particles approx. 0.08 mm Flow rate max. 60 l/min LBFTTDF – double switchable filter Nodpfx Aasz Dq N Eozjlg Filtration of particles approx. 0.1 mm Bypass system allowing filter cartridge replacement AZPL – air workpiece position control Additional equipment: CNC control Siemens 840D sl 2 main spindles Driven tools C-axis 12-position turret VDI 50 1 automatic workpiece pallet conveyor Shuttle system with rotary station Automatic measuring probe Separate belt conveyor for chips High-pressure cooling 20 bar Coolant filtration Hydraulic clamping circuits Central lubrication Complete safety guarding CE The machine is particularly suitable for automated series production of rotational parts, where the two independent machining stations, driven tools, and automatic workpiece handling can be utilized.

Condition: excellent (used), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, machine/vehicle number: Z45, feed length X-axis: 1,200 mm, feed length Y-axis: 700 mm, feed length Z-axis: 500 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, travel distance X-axis: 1,200 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 2 m/min, rapid traverse Y-axis: 2 m/min, rapid traverse Z-axis: 1 m/min, position of the milling head: pionowa, spindle speed (max.): 2,050 rpm, spindle speed (min.): 30 rpm, total height: 2,180 mm, total length: 2,475 mm, total width: 2,260 mm, rotational speed (max.): 2,050 rpm, rotational speed (min.): 30 rpm, overall weight: 5,000 kg, table length: 1,600 mm, workpiece weight (max.): 1,800 kg, table load: 1,800 kg, table width: 500 mm, torque: 18 Nm, Equipment: rotational speed infinitely variable, Universal milling machine EUROMETAL FUS 50, year of manufacture 2021, equipped with a T-slot table 1500x500mm, servo motors on three axes X, Y, Z controlled by manual handwheels or automatic feed function, rapid traverse, digital parameter readout, ISO 50 spindle taper, mechanical spindle speed adjustment range 50-2050 rpm, swiveling vertical milling head, spindle brake for tool change, automatic central lubrication system, cooling system, work light, ER40 tool holders and holders for the head; traverse range X – 1200mm, Y – 700mm, Z – 500mm. The milling machine is in perfect condition after approx. 100 hours of operation. Nodpfx Aaoy Nmngszslg

Condition: used, Year of construction: 2018, x-axis 3060 mm y-axis 1530 mm z-axis 160 mm workpiece weight 200 kg/m² traversing speed 100 m/min weight 12000 kg dimensions of the machine ca. 10150 x 4050 x 2420 mm Combination laser, consisting of a flatbed laser and a tube laser Nlodpsz A Hz Uofx Aazsg Flatbed laser: Work table (mm) 3048 x 1524 Max. simultaneous speed (m/min) 141 Positioning accuracy (mm): 0.05 Repeatability (mm): 0.05 Laser power (kW): 3 Max. material thickness, carbon steel (mm): 16 Max. material thickness, stainless steel (mm): 8 Max. material thickness, aluminum (mm): 8 Configuration: - SIEMENS 840 D sl control system - Auto-Focus cutting head - IPG 3 kW laser source - Automatic shuttle table - Automatic verification of sheet size and position - Start position can be set using a laser diode - Automatic nozzle cleaning - Central lubrication Tube laser: Tube diameter: 25â??400 mm Tube length: 3000 mm

Year of construction: 2010, operating hours: 11,200 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 12222321222, Equipment: type plate available, Elumatec SBZ122/33 profile machining center, year 2010 Technical data: Working area: X - 3850 mm, Y - 350 mm, Z - 280 mm Electrospindle 10 kW - max. 20,000 rpm (overhauled in 2023) (RF-HSK-F63 125/125x430 24/6.5) Tool holder HSK-63 F Tool changer Nlsdpfx Aaow Rv A Uezjg Work table with 4 clamps with automatic positioning Pneumatic clamping operation Photoelectric safety barrier Operator handheld terminal Control panel workstation USB connection Operating software: Windows 7 system Production software: EluSoft, EluCAM Numerical control: Ferrocontrol Protective fencing with doors (laser safety barrier) Automatic and central lubrication of linear guides Weight: 1,940 kg Total connected load: approx. 14 kW Machine dimensions: 4,670 x 2,000 x 2,540 mm Required space: 5,165 x 3,000 x 2,540 mm Machine used for aluminum profile processing. Serviced and ready for operation.

Condition: good (used), functionality: fully functional, Multiblade Foiler WD FR8 with centering device 2x floating saws maximum saw blade distance 550 mm maximum cutting height 165 mm maximum clearance: width 880 mm x height 180 mm central lubrication system hydraulic roller lifting system feed speed continuously adjustable in the range of 0-250 m/min centering conveyor at the entrance to the machine full hudraulics strong solid body Nedpsqwgy Nsfx Aazolg robust line not afraid of challenges

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, For sale: Hundegger SC 480 Speed-Cut – Year 2023 We are selling our fully automatic cutting system, the Hundegger SC 480 Speed-Cut, from 2023. Machine equipment (excerpt): - SC 480 Fully automatic cutting system, base machine with 5-axis sawing unit – mirrored version - Hundegger production software CAMBIUM - Line laser for component referencing - Infeed and outfeed cross conveyor 10.1 m, 7 strands (for timber lengths up to 13 m) Nsdpfxjza Dzde Aazolg - Hydraulic lifting table for timber length 13 m (6 t) - Vertical finger milling cutter 6.5 kW and 10 kW HSK spindle - 4-axis revolver milling cutter 7.5 kW universal unit - Drilling unit 3.0 kW hydropneumatic - Grooving unit - Inkjet labeling system (max. 101.6 mm) - Label printer system on the component discharge area - Discharge table, pneumatic, for timber lengths up to 13 m - Central lubrication system - Various other options and units General: Year of manufacture: 2023 Operating hours: low (machine from ongoing operation) Regularly maintained by Hundegger Condition: very good Contact: Philipp Schöb, Schöb AG, Haagerstrasse 80, 9473 Gams

Condition: used, Year of construction: 2020, Overview Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Nlodpfx Aaszzz N Hszog Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Technical data - Manufacturer: Krones - Model: Ergomodul - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm - Container infeed: worm with servo drive; detects damaged and fallen-over containers - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Condition Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 2,800 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, spindle motor power: 30,000 W, total height: 1,915 mm, total width: 2,035 mm, overall weight: 5,650 kg, product length (max.): 3,821 mm, number of axes: 3, This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw power chuck diameter of 305 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 3100 M horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D control touchscreen with ShopTurn 15-inch display • 3-axis CNC horizontal turning machine with driven tools and tailstock • C-axis main spindle: 360° resolution 0.001° • C-axis speed: 200 rpm • C-axis torque: approx. 1162 Nm • Swing diameter over bed: 720 mm • Swing diameter over cross slide: 590 mm • Max turning diameter: 376 mm • Max turning length: 725 mm • Main spindle bore: 115 mm • Bar capacity: 103 mm • Spindle nose: ASA A2-11 • Max torque: approx. 1112 Nm • Rapid traverse X-axis: 24 m/min • Rapid traverse Z-axis: 30 m/min • Feed force X-axis: 9465 N • Feed force Z-axis: 17379 N • Three-jaw power chuck diameter: 305 mm with soft jaws • 12-station tool turret with BMT65P tool holders • Max driven tool speed: 5000 rpm • Driven tool power: approx. 7.7 kW • Driven tool torque: approx. 75 Nm • Tailstock with quill diameter: 100 mm • Quill stroke: 100 mm • Hydraulic clamping system with hollow cylinder • Monoblock cast iron machine bed, Meehanite construction • 30° slant bed design • Hardened and ground guideways with low-friction coating • Automatic central lubrication • Coolant system: 7 bar pressure • Coolant tank capacity: approx. 235 liters • Hydraulic tank: approx. 20 liters • Full enclosure with working area lighting • Bar feeder interface • Oil skimmer • Electronic safety clutch for X and Z axes • Electrical connection: 400 V, 3-phase, 50 Hz • Total power: approx. 47 kVA Nlodpfxey E I Hio Aazeg • Unused (like new) • OPTIONAL: HALTER LoadAssistant Universal Big 70 (Robot) • Gripper for Doosan Universal Big 70 • Rotation Station • Workpiece Support • Base Plate 23 mm / 175 mm Big 70 • Machine Interface Box • () Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2014, KOVOSVIT MAS MULTICUT 630S x 3000 multi-axis turning center for sale. Heavy-duty multitasking machine configured for complete machining of large and complex components. Machine is equipped with milling spindle, lower turret, right spindle/tailstock, automatic tool changer and hydraulic steady rest system. Machine is currently under power and can be inspected in production. Nedpfx Aaoy U Nacezslg Main configuration: MULTICUT 630S x 3000 Siemens SINUMERIK control with SHOPTURN Right spindle / tailstock Milling spindle with high-pressure coolant Automatic tool changer 120 tool positions CAPTO C8 Magazine for 3 boring bars with automatic exchange B-axis prepared for automatic boring bar clamping Hydraulic steady rest K5.1 Ø100–410 mm High-pressure coolant through spindle – 60 bar External coolant system Chip conveyor Automatic door opening Central lubrication Machine status signal lamp Electrical cabinet with air conditioning Prepared for bar feeder USB and Ethernet connection Tool measuring probe Viviport spin windows in doors Technical details: CAPTO C8 system Max boring bar length: 500 mm Max boring bar weight: 12 kg Through hole right spindle: Ø127 mm 10,000 rpm spindle option S1/S6 spindle power: 37/47 kW Spindle torque: 140/180 Nm Machine hours: System power on time: 52,270 h Machine power on time: 49,264 h Automatic cycle time: 9,599 h

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: AL 00 - 647, functionality: fully functional, 5-axis CNC machining center Software: SCM Xilog Plus Operator software: SCM Panel-Mac X = 3470 mm Y = 1240 mm Nlsdpfx Aaeyyb N Tszjg Z = 180 mm 6 cross beams 6 loading aids Rear & middle stop rows Vacuum pump 90 m³/h Vacuum cup positioning with crosshair laser Disc tool changer with 12 tool positions 5-axis milling spindle 360° 11 kW 20,000 rpm Tool interface HSK 63-F Handheld control unit Drilling head X = 7 Y = 5 X horizontal 2 x 2 Y horizontal 1 x 2 Grooving saw with 5-axis milling spindle Safety device "Bumper" Central lubrication

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Deckel FP 1 MK with TNC 123, year of manufacture 1994, with CE marking. Spindle speeds: 40 - 2000 rpm, SK 40. Travel distances: X 300, Y 160, Z 340. Stepless feed rate + rapid traverse in all axes. Weight: approx. 880 kg. Accessories: Universal table, electric central lubrication system, coolant system, Njdpfx Aaozx Ep Sozolg collet set, 5 tool holders, Röhm machine vise, swarf drawer. Condition: Original, not repainted, smooth operation at all spindle speeds and axis movements, and flawless guidance. Can be inspected while powered on. Free loading at D-88433 Schemmerhofen.

Condition: excellent (used), Year of construction: 2019, operating hours: 7,000 h, functionality: fully functional, MACHINE CONSTRUCTION: - Cast iron bed, spindle head, and saddle system developed through computer-aided design and analysis (CAD/CAE), ensuring high rigidity and vibration damping - Fully supported table guide in every working position - X-axis (table movement) on 2 precision cylindrical roller guides, supported by 6 runner blocks each - Y-axis with 2 precision cylindrical roller guides - Z-axis with hardened and ground guideways, with TURCITE-B coating - Guideway protection via metal telescopic covers - Hydraulic counterweight / balance system - CE conformity Axes: - Preloaded ballscrews with large pitch for long-lasting precision - Digitally controlled, liquid-cooled ballscrew on the X-axis - Gear-driven ballscrews, ballscrew nuts with centralized lubrication, and lifetime-lubricated bearings CONTROLLER & ELECTRONICS + CAPACITY: Nledpfx Aaszzf Rujzjg - High-speed CNC, 1 ms block processing time - Storage capacity: 120 GB SSD - Technology program memory: 100 GB SSD - Number of processor cores: 4 CNC operating system: - User interface operating system: Windows 10 - Technology program storage: WINDOWS file system - Total storage capacity (system program, PLC, parameters, technology program memory) on a single SSD - New user interface (40-00005216-00w) SCREEN: Color graphical LCD touchscreen COMMUNICATION: USB, Ethernet, EtherCAT MEASURING SYSTEM: - HEIDENHAIN absolute EnDat 2.2 - PROGRAMMING: ISO, myNCT TECHNICAL DATA: - X-travel: 2100 mm - Y-travel: 1500 mm - Z-travel: 1000 mm Distance from spindle nose to table surface: 200~1000 mm Distance between columns: 1650 mm Distance between table and gantry/crossrail: 1710 mm AXES: - Rapid traverse speed X / Y / Z axis: 20 / 20 / 15 m/min - Max. working speed: 10 m/min - Motor power: 4 kW ACCURACY (according to JIS6338): - Positioning accuracy: +/- 0.01 mm (In the entire working area!) - Repeatability: +/- 0.004 mm TOOLING: - Max. tool diameter / with adjacent tool omitted: 125 / 215 mm - Max. tool length: 400 mm - Max. tool weight: 20 kg - Optional tool taper: SK50 Accessories & Equipment: - Angle head (manual) - Chip conveyor - Coolant flush gun - 15 pcs of SK50 tool holders - Machine leveling feet - Manuals The machine is in good used condition and operates accurately.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, DECKEL FP 4 MK Year of manufacture: 1992, with TNC 113 active digital control with positional programming Nledozxwz Tspfx Aazog Spindle speeds: 50 - 2500 rpm Travel ranges: X 500, Y 400, Z 400 Feed rate: stepless + rapid traverse Hydraulic tool clamping system SK 40 Hydraulic machine vice Allmatic 125 Universal table Central lubrication, electric, lighting, machine feet, coolant system. Condition: original, not repainted Smooth and quiet operation at all spindle speeds Guideways and axis movements are in perfect condition. Weight approx. 1500 kg Can be inspected while powered on. Free loading D - 88433 Schemmerhofen

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 712 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 515 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: Siemens und Heidenhain, workpiece height (max.): 400 mm, workpiece diameter (max.): 540 mm, workpiece weight (max.): 200 kg, total height: 3,360 mm, total length: 4,040 mm, total width: 2,770 mm, table load: 200 kg, rotary table diameter: 410 mm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, number of spindles: 1, number of slots in tool magazine: 60, tool length: 280 mm, tool diameter: 76 mm, tool weight: 7,000 g, Equipment: chip conveyor, documentation/manual, Machine available with Siemens 828D Technical data 5-SIDE MACHINING • B/C-axis encoder • B-axis +30° to -120° • C-axis 360° • Media preparation table TOOL MAGAZINE CAPACITY • 60-position magazine (chain) • Tool diameter 76 mm • Tool length 280 mm • Tool weight 7 kg LARGE MACHINING AREA • Travel X: 712 Y: 540 Z: 515 • Swivel diameter 540 mm • Workpiece weight 200 kg • Workpiece size ⌀540 mm x 400 mm USER-FRIENDLY DESIGN • Large work area doors • Short distance to the spindle • Good access to the machining area and tool magazine EQUIPMENT • CNC control Siemens 828D (15") or Heidenhain TNC 640 • MPG handwheel • 60-position tool magazine • 12,000 min⁻¹ (taper #40), coupling • Spindle cooler • Air blow-through through the spindle • 20 bar coolant supply • CAN filter for chip flushing/ring cooling • Automatic central lubrication system Njdozlhvhepfx Aazolg • Media preparation table (6 connections) • Glass scales X, Y and Z axis • Chip conveyor • Direct path measuring system C/B axis • Deublin rotary union • CE specification

Condition: used, Year of construction: 2005, operating hours: 9,464 h, CAT 365B L FS Series II Year: 2005 Hours: 9,464 Engine: Cat 3196 ATAAC kW / HP: 297 / 404 Weight: 73,340 kg Tracks: 650 mm triple grouser shoes Bucket: 4.00 m³ Digging depth: 2,480 mm Dump height: 10,960 mm Njdpfx Aewlimqjazolg Equipment: Central lubrication system Air conditioning Radio Machine in technically and visually perfect condition, available immediately

Condition: excellent (used), mileage: 136,029 km, fuel type: diesel, color: red, lifting height: 37,400 mm, mast type: telescopic, Year of construction: 2016, operating hours: 7,578 h, = Additional Options and Accessories = - PTO = Further Information = General Information Year of manufacture: 2016 Intended use: Construction Technical Information Number of cylinders: 6 Drive: Wheeled Functional Mast: Telescopic (4 sections) Mast length: 37.4 m Lifting capacity: 40,000 kg Superstructure brand: TEREX AC40 CE marking: yes Condition Technical condition: very good Visual condition: very good TEREX AC40 CRANE Nodouxu Dtepfx Aazjlg DRIVE 4X4X4 COUNTERWEIGHT 5.5 TONS CARRIER 136029 KM AIR CONDITIONING AUTOMATIC TRANSMISSION TIRES 60% GOOD SIZE 445/95/R25 ADBLUE CENTRAL LUBRICATION SYSTEM UPPER STRUCTURE HEATING 1 TIMBER SLEEPER 15 T. 1X WINCH MAX. LIFTING CAPACITY: 40,000 KG MIN / MAX BOOM LENGTH 9.5 M / 37.4 M MAX WORKING HEIGHT 37.4 METERS CE CERTIFICATE FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPANOL

Condition: used, Year of construction: 2013, operating hours: 11,082 h, Boom type: Monoblock boom Fueling pump: Yes Ground plate width in mm: 500 Service weight: 72400 Emission class: Emission class 3A EPA certification: Yes Complete cab protection: Yes Air conditioning: Yes Stick length: 2600 Machine width in mm: 4200 Engine: Liebherr D 9508 Bulletproof glass: Yes Rear view monitoring with camera: Yes Additional extras: Cab height increase of 800 mm, lifting cylinder with piston rod Nljdpfx Aaozx Ntuozog Central lubrication system: Yes Condition of left track in %: 90 Condition of right track in %: 90 Condition of track roller in %: 80 Condition of undercarriage in %: 90 Condition of idler in %: 80 Visual condition: clearly used - 4 Condition of support wheel in %: 50 Technical condition: Requires repair - 4 Condition of turret in %: 90 ---- Air conditioning Machine width: 4200 mm Cab height increase: 800 mm Transport height 3700 mm with removed cab and stick

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, total height: 2,200 mm, total length: 1,700 mm, total width: 1,100 mm, rotational speed (max.): 2,650 rpm, power: 1.6 kW (2.18 HP), water tank capacity: 100 l, RÖSLER RZ 150 A cleaning system – automatic sludge removal For sale: a professional RZ 150 A cleaning system with automatic sludge removal. This unit is designed for industrial use, fully automated, and equipped with modern solutions to increase efficiency and durability. Key parameters: • Dimensions: 1700 x 1100 x 2200 mm • Power: 1.6 kW • Rotor speed: 2650 rpm • Rotor made of aluminum alloy • Steel housing Nlsdpfszca Apox Aazeg Equipment and functions: • Smooth start and stop thanks to the frequency inverter • Adjustable sludge removal speed • Automatic retraction of the cleaning blade • Automatic removal of remaining water • Electronic vibration control • Automatic rotor flushing • Special bearing lubrication system to extend the unit's service life Central control unit E61-400: • Control and monitoring of the cleaning system • E61-400 control unit • SIEMENS S7-1200 controller • Ensures automatic and stable operation of the entire system Sludge removal time is adjustable from 2 to 5 minutes, depending on the consistency. A single cycle removes up to 25 kg of sludge. Additional system equipment: • Sandpiper P9 diaphragm pump for supplying water to the centrifuge • Pump operation cycle control • Water level control in the tank The set also includes a P 100 SB-P9 buffer tank for residual dirty water from the centrifuge. The tank is required if the centrifuge is located far from the source of dirty water. P 100 SB-P9 buffer tank: • Height: 700 mm • Capacity: 100 l • Designed for transporting dirty water and rotor flushing water to the buffer tank • Made of durable HDPE polyethylene (black color) • Sloping, 3-sided funnel-shaped bottom • P9 diaphragm pump – operating pressure 4 bar • Water level control RSKM 30 waste container: • Capacity: 300 l • Dimensions: 1300 x 820 x 800 mm • Manual operation • Can be transported and emptied using a forklift • Made of steel • Discharge port with drain plug • Equipped with a tilting mechanism The unit is robust, efficient, and ready for operation.

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: AN-No.: 88.04.017 D, 8 very clean (reworked) Jakob Müller Frick AG looms NF42 from 1988, 1989 and 1990 from my stock. Machines run perfectly, 100% functional (refurbished) 12 shafts, without creel, with Mütrans, partly Müdata 1 piece NF 2/84mm from 1989 for 6.900€ AN-No.: 88.04.017 D with Müdata and Mütrans, 16 stocks 3 pieces NF 2/84mm overhauled from 1990 for 6.500€ each AN-No.: 90.01.704 B Nsdpfx Aaor Ix Igozelg AN-No.: 90.01.755 A AN-No.: 90.01.229 A 1 piece NF 2/84mm overhauled from 1989 for 6.500€ AN-No.: 89.00.118 D 3 pieces NF 2/84mm refurbished from 1988 for 6.500€ each AN-No.: 88.04.244 A AN-No.: 88.02.758 A AN-No.: 88.02.758 B The machines come from a curtain band production and were originally equipped with a Z compartment. They were converted to standard compartments as part of the general overhaul. Dogonl All tension trees and press rollers have been newly vulcanized by Westland. The card rollers in the chain case are also new or newly vulcanized. The central lubrication in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and have 12 shafts installed. All machines are equipped with Mütrans II. Individual machines with double belt take-off (heavy fabrics) can optionally be supplied. I think possible for 4-5 machines. It is also possible to equip it with finely knurled tension trees. I think it is also possible for 4-5 machines. All needle holders are suitable for double needles. For this purpose, two additional Mütrans II can be installed upon request. The machines have been rebuilt from scratch. All bearings, shafts and bushings have been checked and replaced if necessary. All swing arms have been checked and replaced if necessary. Installed are: 1st shaft free (spacer block installed) 2nd and 3rd shaft swingarm 201 4th - 6th shaft swing arm 202 7th - 9th shaft swing arm 203 10th - 12th shaft swing arm 204 13th shaft swing arm 205 All shaft springs have been checked and replaced if necessary. Nothing is porous, cracked or defective. The electrical installation has been checked, the circuit board for the thread monitoring has been checked and, if necessary, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and free of damage. The machines come without Müdata. 4 machines are also equipped with a crawler gear. The machines have been set up and tested. The machines come without oil, strands, slats, reeds, needles and chain links. Delivery on a Euro pallet, FOB Wuppertal