Used Hcp Grv 554 for sale (128)

Condition: used, mileage: 18,629 km, power: 180 kW (244.73 HP), first registration: 10/2003, fuel type: diesel, empty load weight: 11,325 kg, maximum load weight: 3,675 kg, overall weight: 15,000 kg, tire size: 285/70R19.5, axle configuration: 4x2, next inspection (TÜV): 11/2025, color: red, driver cabin: other, gearing type: mechanical, emission class: euro3, suspension: air, number of seats: 6, Equipment: ABS, additional headlights, cabin, differential lock, fog lights, low noise, Vehicle location: Bovenden, Doka, 1x air seat, electric mirror, heated mirror, left electric window, right electric window, ABS (anti-lock braking system), constant throttle, PTO, differential lock, fog lights, work lights, rotating beacon, storage box, air suspension, low-noise G1, 4-point hydraulic outriggers, yellow environmental sticker. Superstructure: Metz turntable ladder DLA-K 12/9 L20FA with 2000l water tank & Rosenbauer N20 fire pump (turntable ladder approx. 1157 operating hours). Fire service-specific superstructure: Metz turntable ladder, 4-point hydraulic vertical outriggers with electronic ground pressure monitoring, 230V power supply to the rescue cage, intercom between the main control station and the cage, load eye on the lower ladder for loads up to 1.1 tons, 2-man rescue cage (180 kg max. payload), permanently piped water supply in the top section of the ladder, holder for power generator on the carriage (with power supply for rescue cage), 2 blue lights (double flashing beacons) on the driver's cab, 1 rear blue light (double flashing beacon), FIAM compressed air horns on the driver's cab roof, 2 front flashers, holder for work site spotlights on the front of the vehicle on the right, 2 halogen spotlights 1000 watts/230 volts, 2 drive-on planks, 4 chocks for outrigger plates, water cannon/monitor for attachment to the rescue cage, access ladder for hanging on the base of the ladder, stretcher support for attaching to the rescue cage, hanging device for attaching to the rescue cage, plug-in hanging device for climbing and lowering devices, reflective contour markings on the podium. Firefighting equipment: Metz fire engine, driver and crew compartment for 1+5 crews, seating arrangement in the crew compartment facing the direction of travel, 2,000-liter GRP water tank with electric level indicator, Rosenbauer N20 centrifugal fire pump, 2xB pressure outlets, quick-intervention reel for 50-meter DN25 pressure hose, storage for TP4/1 submersible pump, brackets for 4 self-contained breathing apparatus in the crew compartment, storage for a chainsaw, storage for 60 liters of foam agent in canisters, proportioner for medium and low-expansion foam pipes, storage for 4x B and 6x C roll-up hoses. The vehicle was used in firefighting service until December 2024. The vehicle is being sold due to replacement. The vehicle is being sold for replacement. 10-year factory inspection performed in 2013 at Rosenbauer in Karlsruhe: - Hydraulic hoses replaced, oil and filter changed, - Main control cable replaced in the ladder system, Hedpfx Ajv T U Eceqijfk - Ladder set measured - All hydraulic cylinders checked and sealed. Manufacturer inspection according to DGUV Principle 305-002 on December 2023. Last service with engine oil change performed in December 2023 at 17,948 km. The vehicle batteries were replaced in December 2022. Tires replaced (6-piece) in November 2019. The vehicle was serviced annually by the manufacturer... ACCESSORIES INFORMATION IS SUBJECT TO GUARANTEE. Subject to change, prior sale, and errors! - .

Condition: used, functionality: fully functional, Year of construction: 1997, Used Safan guillotine shear Hsdpfx Aqsxzf Sleijfk Type: VS 255 4 Capacity: 2550 x 4 mm Electrically adjustable backgauge Manual adjustment of cutting angle and blade gap

Condition: used, functionality: fully functional, Year of construction: 1997, Used guillotine shear by Safan Type: VS 255 4 Capacity: 2550 x 4 mm Electric back gauge with NC control Hfsdpsxrf Hwofx Aqiok

Condition: used, Year of construction: 2007, Data sheet of retrofit POS. GE 11.70 Gebhardt 5.5 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \'skeleton\' Year of manufacture: 2007 Belt length: 900 mm Length of main conveyor: 5,549 mm (incl. upper bow piece) Length upper bow piece: 613 mm Total width: 610 mm Belt width: 500 mm Belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 650 mm H 2 above 2,300 mm Difference in altitude: + 1,650 mm, trail/slope 19° or 34% Support: Please ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable Condition: functional and visually good condition Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Hfodpfx Aqok Aa Agsiok Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2007, Gebhardt Belt conveyor system 5549-610-500 with pre-flow belt 900-610-500 RA1005 The belt conveyor system from Gebhardt is from 2007 and is in a very good (used) condition. It has an engine of the brand SEW. The system can be used in up-and-down operation. Inclination angles are adjustable as desired, upper arc and supports can be adjusted. Columns are not included in the scope of delivery. These are optionally available. Consisting of: 1 x pre-flowstrip, 1 x main band, 1 x sheet piece Technical data: Manufacturer: Gebhardt Type: 300.10 Position: GE 12.20 Built: 2007 Condition: very good (used) Engine: fully functional Length main band: 5549 mm (incl. top bow) Nominal/outer width (NB): 610mm Belt width (GB): 500 mm Webbing: slightly structured Length pre-flow belt: 900 mm Length of sheet: 613 mm Webbing: smooth Heights OK Strap: H 1 bottom + 650 mm H 2 top 2,300 mm Hsdsk Aa Akopfx Aqisfk Height difference: + 1650 mm, slope/slope 19Â ° or 34Â ° Engine Type: SEW Gear motor Central drive with clamping station Engine Power: kW 0.37/S1 Hz 50 A 2.00/1.15 Conveyor speed: 0.3 m/s Scope of delivery: without supports (if necessary please enquiries) Optional: supports Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment For an individual, expert consultation, simply contact us. Just contact us by phone or e-mail. We are happy to help you plan and implement your projects. We look forward to hearing from you. Yours sincerely, Your team at Dr. Sonntag GmbH & Co. KG - your specialist and contact for intralogistics Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: excellent (used), Year of construction: 2015, Robopac Athena Combi 5545 automatic shrink film wrapping machine The Athena Combi automatic shrink wrapping machine is based on technologies of high-end industrial machines. Due to continuous product development and research, Athena Combi provides great performance, versatility, and user-friendly interface. Because of the outstanding adaptability and accuracy of the machine, makes it possible to use high range of materials for shrink filming. Hfjdpfov D Ezijx Aqijk The equipment meets the most stringent safety standards as well. Manufacturer: Robopac Model: Athena Combi 5545 Year: 2015 Sealing bar dimensions LxW: 550x450 mm Max. product height: 120 mm Min. Product dimensions LxWxH: 50x20x20 mm Capacity: 30-35 packages/minute Max. product weight: 120 kg. Power: 400V / 12kW / 50-60Hz Machine Dimensions LxWxH: 2.700x1.200x1.500 mm Machine Weight: 600 kg.

Condition: excellent (used), Year of construction: 2009, Boiler Astebo 5500kw,10Bar,120°,year 2009,capacity 5250l Hedpjvu I Dnefx Aqiofk

Condition: new, Year of construction: 2026, CORMAK TS255 Table Saw The CORMAK TS255 is a robust and precise table saw designed for professional woodworking shops and production workshops. Thanks to its advanced construction, large working area, and efficient three-phase motor, the machine ensures reliable performance during intensive use. It is a versatile tool dedicated to precise cutting of solid wood, panels, and wood-based materials. Main advantages of the machine Maximum saw blade diameter of 254 mm – enables cutting elements up to 80 mm thick at a 90° angle. Precise height and cutting angle adjustment – an ergonomic adjustment wheel allows smooth and accurate setting of cutting parameters according to the material being processed. Powerful 2.2 kW (S1, 400V) motor – provides constant power even when cutting hard wood species. Cast iron working table – resistant to deformation, ensuring stability and precise material guidance. Large sliding table and side extension table – increase machining capabilities when working with large elements. Stable steel construction – minimizes vibrations and improves safety and cutting quality. Construction and technology The TS255 table saw has been designed for long-term, trouble-free operation in industrial environments. The cast iron working table is precisely ground, ensuring smooth and accurate movement of the workpiece. The large sliding table (240 × 1320 mm) combined with the main table extension allows efficient processing of elements up to 1300 mm in length and 1250 mm in width. The integrated side table makes handling larger panels easier and more comfortable. The blade height and angle adjustment system is operated using an ergonomic handwheel, allowing quick and precise setting of cutting parameters. With a blade tilt range from 90° to 45°, the machine enables bevel and angled cuts without repositioning the workpiece. Precision and work efficiency Thanks to its solid construction and stable guidance system, the TS255 table saw provides excellent cutting repeatability. The blade speed of 4000 rpm, combined with optimized blade geometry, ensures clean and accurate cuts without tearing or burning of the material. The machine’s high efficiency allows fast and effective processing of large quantities of material, resulting in time savings and increased production performance. Applications The CORMAK TS255 table saw is a versatile solution for: Woodworking and furniture manufacturing companies – for precise cutting of large-format panels and wooden components. Production workshops – where reliability and high machine performance are required. Professional craftsmen – looking for a stable and accurate tool for everyday woodworking tasks. Technical education facilities – as a safe and effective machine for teaching woodworking operations. Standard equipment Carbide-tipped saw blade 254 mm Parallel fence Mitre fence Table extension Sliding table Hfodpfxovxhlgs Aqijk Technical specifications Parameter Specification Maximum saw blade diameter 254 mm Saw blade bore diameter 30 mm Blade speed 4000 rpm Blade tilt range 90°–45° Maximum cutting depth at 45° 50 mm Maximum cutting depth at 90° 80 mm Working table dimensions 350 × 800 mm Sliding table dimensions 240 × 1320 mm Maximum cutting width 1250 mm Maximum cutting length 1300 mm Continuous motor power (S1) 2.2 kW Power supply 400 V Weight 180 kg Machine dimensions 1550 × 1900 × 820 mm

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 5000014, Year of construction: 2008, operating hours: 1,813 h, fuel type: diesel, power: 74.5 kW (101.29 HP), empty load weight: 4,700 kg, TECHNICAL DETAILS Power: 74.5 kW Max. tractive force: 35 kN Hfsdey Iakxspfx Aqijk MACHINE DETAILS Drive: 4x4 Engine: Perkins (diesel) Unladen weight: 4,700 kg Operating hours: 1,813 h EQUIPMENT Closed cabin HUSS exhaust filter system Transport/industrial coupling Simple, robust design (low susceptibility to failure)

Condition: good (used), Reznor UDSA gas air heater UDSA gas warm air heater - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation with CE system certification, version B or C Compact design for easy installation even heat distribution Vertical and horizontal air guide fins as standard Modulation of the heat output up to 50% EC technology ErP Ready These appliances are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Only an approved installation company may carry out the installation of the gas WLE and the gas and flue gas connections. The gas WLEs are suitable for : - Natural gas or liquid gas operation - Recirculated air operation - Intake temperatures below 5°C with stainless steel heat exchanger * - 1-stage or 2-stage heating operation* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outer wall, version C ° Gas WLE type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Hfodpswb A Hiofx Aqijk Destination: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. Nominal heat load (Hs) QN: 66.04 kW Max. Nominal heat load (Hi) QN: 59.50 kW Min. nominal heat load (Hs) QN: 33.02 kW Min. nominal heat load (Hi) QN: 29.75 kW Max. Nominal heat output: 54.74 kW Min. nominal heat output: 26.92 kW Supply voltage: 230V 1N ,50Hz Air flow rate: 5830 m3/h Protection class: IP20 Pin no. 0461BN0677 Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: new, FILTER SYSTEM DE-55 400V Hfjdpfx Aqeg Rbz Ieiok Technical Specifications: Speed: 2850 Power supply: 400V 50Hz (optional) Fan power: 5.5 kW Airflow: 6400 m3/h Internal dimensions (L x H x W in mm): 1140x2250x730 Weight in kg: 199 kg THE OFFER INCLUDES: Filter system DE-55 400V (optional) CE Declaration of Conformity 24-month warranty for consumers 24-month warranty for businesses Professional service after the warranty period

Condition: used, functionality: fully functional, ILLIG Universal Forming Machine Type UA 155 4g solo Technical Data Hedoxlzqfspfx Aqisfk - Siemens control system - Max. material size: 1500 x 1250 mm - Max. forming area: 1450 x 1200 mm - Max. tool height: 700 mm - Max. material thickness: 12 mm - Heating capacity: 96 kW - Total power: 105 kW - Electrical protection: 160 A - Vacuum pump capacity: 250 m³/h - Compressed air requirement: 6 bar Features - Top heater with 5-zone HTS control (700ºC) - Bottom heater with 5-zone HTS control (500ºC) - Cooling fan D06 - Table cascade - Vacuum cascade - Top punch - Includes ILLIG chiller and ILLIG temperature control unit

Condition: used, Year of construction: 1998, ILLIG Universal Forming Machine UA 155 4G + BE 155 P FHZ Technical Specifications: - Maximum material size: 1500 x 1250 mm - Maximum forming area: 1460 x 1210 mm - Maximum tool height: 600 mm Hedpfoxlzrcjx Aqijfk - Maximum material thickness: 12 mm Forming Station - Schleicher P03 control system - Automatic tooling infeed and removal function - Top heater with ceramic elements and 5-zone control - Bottom heater with ceramic elements and 3-zone control - Storage of programs and heating settings - Clamping frame with quick-change system - Upper frame parallel, longitudinal crossbars for use with fixed-format frames - Lower clamping frame for frame installation from below, central clamping via electric motor - Bottom table pneumatically operated, rapid/creep speed adjustable by percentage - Upper stamp rapid/creep speed adjustable by percentage - Pre-blow automation adjustable by percentage - Pre-vacuum adjustable by percentage - De-moulding automation adjustable by percentage - Sheet sag control by light barrier with support air - Six-fold cooling fan - Large front opening for tool changes - Vacuum pump Sheet Feeding - Automatic sheet feeding system - Finishing heater in feeding area for pre-heating or final heating of sheets - Motorized sheet lifter - Motorized adjustable sheet positioning - Motorized transport lifter - Motorized adjustable transport width

Condition: good (used), Drilling capacity: Ø 50 mm Spindle fitting: MT5 Spindle speeds: 18 - 2,000 rpm Spindle stroke: 400 mm Hjdpjy Ia Azefx Aqiefk Maximum horizontal arm travel: 1,250 mm Maximum spindle to floor plate distance: 1,600 mm Equipped with: - Thread-cutting device - Drilling table Machine weight: 4,500 kg Machine dimensions (LxWxH): 2,800 x 1,000 x 3,500 mm

Condition: good (used), Year of construction: 2013, functionality: fully functional, conveyor belt length: 9,050 mm, conveyor belt width: 600 mm, conveyor belt speed: 170 mm/s, total length: 8,450 mm, total width: 1,000 mm, total height: 1,600 mm, discharge height: 1,700 mm, power: 0.37 kW (0.50 HP), TAF item number: 100000554 Manufacturer: FRASCH Year of manufacture: 2013 Overall dimensions (LxWxH) in mm: 8,450 x 1,000 x 1,600 Width incl. side panel in mm: 800 Width incl. drive in mm: 1,000 Side height in mm: 100 Conveyor length, total in mm: 9,050 Conveyor length, horizontal in mm: 6,950 Conveyor length, vertical in mm: 2,100 Conveyor width in mm: 600 Belt type: cleated belt Belt width in mm: 700 Cleats (cleat height/cleat spacing) in mm: 50 / 520 Substructure: fixed supports, height-adjustable Sliding surface: steel Inlet height in mm: max: - min: - Outlet height in mm: max: 1,700 min: 1,500 Drive: Head drive Motor type: Gear motor Motor data: SEW 0.37 kW Conveyor speed in m/s: 0.17 m/s Net weight in kg: Hfedpfx Aqoxf Iukjiek Special features: Some cleats are bent or slightly damaged Condition: Used, fully functional Function test: OK

Year of construction: 2009, condition: used, Chiller, Turbo, Carrier 19XR5655LG467,high effizient, Hedpfsbqy Nbex Aqiofk

Condition: used, Year of construction: 2019, Edge Control Numerical Control Panel height min - max mm 6 - 60 Pvc/Abs up to mm 3 Minimum panel length \ width mm 140 \ 60 Feed speed up to mt/min 10 / 25 continuously Working height electronically adjustable by C.N Lateral roller conveyor with idle wheels for panel support Rectifier unit with 2 motors Coil holder plate Gluing unit for EVA \ PUR glue with cartridge or granular system Edge pressure group on straight profiles with pressure rollers electronically adjustable by N.C Trimming unit with 2 motors Gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 multifunction motors (edger + rounder) with regulation by numerical control in automatic Edge scraping unit with electronic regulation from N.C. Glue scraper group Brush group Machine length mm 6500 approx Weight Kg 2750 approx Hjdpewwhn Djfx Aqiefk

Year of construction: 2017, condition: used, functionality: fully functional, Gemü 55415D19510 2/2-Way angle seat globe piston valve, pneumatically operated with threaded cast copper. PST 4,8-7 bar 180 C PS 12 bar 4 for sale. 1 piece/55 EUR. Good working condition. Please check out our other listings as well. Hfsdst D Rfiopfx Aqiok

Condition: new, Year of construction: 2026, power: 15 kW (20.39 HP), pressing force: 80 t, stroke length: 600 mm, table width: 600 mm, table length: 800 mm, throat depth: 300 mm, Equipment: CE marking, documentation/manual, safety light barrier, 80 Ton C-Frame Hydraulic Press – CHCP 80 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision in metal forming, deep drawing, cutting, and assembly operations. The CHCP 80 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, delivers reliable performance in medium and heavy-duty applications thanks to its robust frame, high capacity, and precise operating capability. Key Advantages - Rigid and vibration-free steel construction frame - High precision (≤120 microns/meter) - User-friendly PLC control system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long lifespan and low maintenance costs Fields of Application Hedpfx Aqeyzb Dtoiofk - Metal forming - Deep drawing and forming operations - Cutting and punching operations - Assembly and pressing tasks - Automotive and related industries Standard Features - Stress-relieved steel construction frame by vibration method - PLC control and touch panel - Argon welding applications - EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) - Parallelism and perpendicularity tolerances according to ISO & DIN standards (≤ 120 microns/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Two-hand operation control system - Cooling system Technical Specifications – CHCP 80 - Press Force: 80 Tons - Stroke: 600 mm - Throat Depth: 300 mm - Table – Ram Distance: 700 mm - Table Size: 600 x 800 mm - Press Depth: 1200 mm - Press Width: 600 mm - Table Height from Floor: 900 mm - Total Height: 2600 mm - Main Cylinder Diameter: Ø200 mm - Motor Power: 15 kW - Weight: 6500 kg General Information - Place of Manufacture: Turkey - Warranty: 24 Months - Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2026, power: 15 kW (20.39 HP), pressing force: 100 t, stroke length: 600 mm, table width: 650 mm, table length: 850 mm, throat depth: 300 mm, Equipment: CE marking, documentation/manual, safety light barrier, 100 Ton C-Frame Hydraulic Press – CHCP 100 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision for metal forming, deep drawing, cutting, and assembly operations. The CRONOSSTECH CHCP 100 C-Frame Hydraulic Press is engineered for heavy-duty manufacturing applications, featuring high tonnage capacity, a robust steel frame, and precision operation. Key Advantages - Rigid, vibration-free steel frame construction - High precision (≤120 micron/meter) - PLC-controlled, user-friendly system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components Hfsdpfx Asyzb Dysqiok - Long service life with low maintenance cost Applications - Metal forming - Deep drawing and stamping - Cutting and punching operations - Assembly and pressing applications - Automotive and supplier industry Standard Features - Steel frame stress relieved by vibration technique - PLC control and touchscreen panel - Argon welding applications - EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) - Parallelism and perpendicularity tolerances in accordance with ISO & DIN standards (≤120 micron/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical equipment - Automatic central lubrication system - Two-hand safety control system - Cooling system Technical Specifications – CHCP 100 Press Capacity: 100 Tons Stroke: 600 mm Throat Depth: 300 mm Table – Ram Distance: 700 mm Table Size: 650 x 850 mm Press Depth: 1300 mm Press Width: 650 mm Table Height from Floor: 900 mm Total Height: 2700 mm Main Cylinder Diameter: Ø220 mm Motor Power: 15 kW Weight: 8,500 kg General Information Country of Manufacture: Turkey Warranty: 24 Months Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2026, power: 5.5 kW (7.48 HP), pressing force: 40 t, stroke length: 500 mm, table width: 500 mm, table length: 600 mm, throat depth: 250 mm, Equipment: CE marking, documentation/manual, safety light barrier, 40 Ton C-Frame Hydraulic Press – CHCP 40 – New / 24-Month Warranty Hydraulic presses are industrial machines designed to deliver high force and precision for metal forming, deep drawing, cutting, and assembly operations. The CHCP 40 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, offers reliable performance for both workshops and production lines with its compact design, robust frame, and precision operation capabilities. Hjdpfsyzb Dgox Aqiefk Key Advantages - Rigid, vibration-free frame construction - High precision (≤120 microns/meter) - PLC-controlled, user-friendly system - Hydraulic and electrical equipment compliant with European standards - Long service life and low maintenance cost Application Areas - Metal forming - Deep drawing and pressing operations - Cutting and punching operations - Assembly and press-fitting processes - Automotive and related industries Standard Features - Stress-relieved steel construction via vibration method - PLC control and touchscreen panel - Argon welding applications - EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) - Parallelism and perpendicularity tolerance per ISO & DIN standards (≤ 120 microns/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic centralized lubrication system - Two-hand control system - Cooling system Technical Specifications – CHCP 40 - Press Force: 40 Tons - Stroke: 500 mm - Throat Depth: 250 mm - Table – Ram Distance: 600 mm - Table Size: 500 x 600 mm - Press Depth: 1050 mm - Press Width: 500 mm - Table Height from Floor: 850 mm - Total Height: 2400 mm - Main Cylinder Diameter: Ø145 mm - Motor Power: 5.5 kW - Weight: 4500 kg General Information - Place of Manufacture: Turkey - Warranty: 24 Months - Condition: Brand new and unused This machine is manufactured in Turkey by CRONOSSTECH.

Condition: new, Year of construction: 2026, power: 22 kW (29.91 HP), pressing force: 200 t, stroke length: 800 mm, table width: 750 mm, table length: 1,000 mm, throat depth: 400 mm, Equipment: CE marking, documentation/manual, safety light barrier, 200 Ton C-Frame Hydraulic Press – CHCP 200 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision for metal forming, deep drawing, cutting, and assembly operations. The CHCP 200 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, is designed for demanding production conditions, offering a high tonnage capacity, reinforced heavy-duty body structure, and superior performance. Key Advantages - Heavy-duty, high-strength steel frame construction Hjdpfx Asyzb Edsqiefk - Stable operation with vibration-relieved structure - High precision (≤120 microns/meter) - PLC-controlled, user-friendly system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long service life and low maintenance cost Application Areas - Heavy-duty metal forming - Deep drawing and stamping applications - High-tonnage die pressing - Cutting and punching operations - Automotive, defense, and heavy industry Standard Features - Stress-relieved, steel frame construction via vibration method - PLC control and touch panel - Argon welding applications - Certified welding in compliance with EN ISO 15614-1 / 2017 (WPQR & WPS approved) - Parallelism and perpendicularity tolerance in accordance with ISO & DIN standards (≤120 microns/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic centralized lubrication system - Two-hand control system - Cooling system Technical Specifications – CHCP 200 - Press Force: 200 Tons - Stroke: 800 mm - Throat Depth: 400 mm - Table – Ram Distance: 900 mm - Table Size: 750 x 1000 mm - Press Depth: 1500 mm - Press Width: 750 mm - Table Height from Floor: 1000 mm - Total Height: 2900 mm - Main Cylinder Diameter: Ø300 mm - Motor Power: 22 kW - Weight: 11,500 kg General Information - Country of Manufacture: Turkey - Warranty: 24 Months - Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2026, power: 18.5 kW (25.15 HP), pressing force: 150 t, stroke length: 700 mm, table width: 700 mm, table length: 1,000 mm, throat depth: 350 mm, Equipment: CE marking, documentation/manual, safety light barrier, 150 Ton C-Frame Hydraulic Press – CHCP 150 – New / 24 Months Warranty Hydraulic presses are industrial machines that deliver high force and precision for metal forming, deep drawing, blanking, and assembly operations. Manufactured by CRONOSSTECH, the CHCP 150 C-Frame Hydraulic Press is engineered for heavy industry and continuous production applications with its high tonnage capacity, reinforced frame structure, and precise operation performance. Key Advantages: • High-strength, vibration-free steel frame construction • High precision (≤120 microns/meter) • User-friendly PLC-controlled system • PARKER / REXROTH hydraulic system • SIEMENS / SCHNEIDER electrical components • Heavy-duty design suitable for industrial use • Long service life and low maintenance costs Applications: • Heavy-duty metal forming • Deep drawing and spinning operations • Die pressing applications • Cutting and punching operations • Automotive and supply industries Standard Features: • Steel frame construction stress relieved by vibration method • PLC control and touch panel • Argon welding applications • EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) • Parallelism and squareness tolerance compliant with ISO & DIN standards (≤120 microns/meter) • PARKER or REXROTH hydraulic system • SIEMENS / SCHNEIDER electrical components • Automatic central lubrication system • Two-hand safety control system • Cooling system Hedpjyzb D Hsfx Aqisfk Technical Specifications – CHCP 150 Press Force: 150 Tons Stroke: 700 mm Throat Depth: 350 mm Table – Ram Distance: 800 mm Table Size: 700 x 1000 mm Press Depth: 1400 mm Press Width: 700 mm Table Height from Floor: 950 mm Total Height: 2800 mm Main Cylinder Diameter: Ø250 mm Motor Power: 18.5 kW Weight: 10,500 kg General Information: Country of Manufacture: Turkey Warranty: 24 Months Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2026, power: 7.5 kW (10.20 HP), pressing force: 60 t, stroke length: 500 mm, table width: 600 mm, table length: 800 mm, throat depth: 250 mm, Equipment: CE marking, documentation/manual, safety light barrier, 60 Ton C-Frame Hydraulic Press – CHCP 60 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision for metal forming, deep drawing, cutting, and assembly operations. The CHCP 60 C-Frame Hydraulic Press by CRONOSSTECH is designed for reliable and consistent performance in both workshops and production lines, thanks to its compact structure, robust frame, and precise operation capabilities. Key Advantages - Rigid and vibration-free frame construction - High accuracy (≤120 microns per meter) - User-friendly PLC-controlled system - European-standard hydraulic and electrical components - Long service life and low maintenance costs Applications - Metal forming - Deep drawing and flanging processes - Cutting and punching operations - Assembly and pressing applications - Automotive and supplier industries Standard Features - Stress-relieved welded steel construction with vibration methodology - PLC control and touch panel - Argon welding applications - Certified welding according to EN ISO 15614-1 / 2017 (WPQR & WPS approved) - Parallelism and perpendicularity tolerance in compliance with ISO & DIN standards (≤ 120 microns/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Dual-hand control system - Cooling system Technical Specifications – CHCP 60 - Press Force: 60 Tons - Stroke: 500 mm - Throat Depth: 250 mm - Table – Ram Distance: 600 mm - Table Size: 600 x 800 mm - Press Depth: 1150 mm Hsdpfoyzb Dmex Aqisfk - Press Width: 500 mm - Table Height from Floor: 850 mm - Total Height: 2500 mm - Main Cylinder Diameter: Ø175 mm - Motor Power: 7.5 kW - Weight: 5,500 kg General Information - Place of Manufacture: Turkey - Warranty: 24 months - Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Condition: good (used), Year of construction: 2011, MANUFACTURER: COMPAIR Hfodpfoya Hacjx Aqiek MODEL: L22RS SERIAL NUMBER: CD10007456001 YEAR: 2011 POWER (kW): 22 OUTPUT (m3/min): 3.15 PRESSURE (bar): 10