Used Hidraulic Book Press for sale (12,810)

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 1729, functionality: fully functional, empty load weight: 10,000 kg, workpiece width (max.): 5,500 mm, workpiece height (max.): 980 mm, Equipment: CE marking, Submitting a bid obligates you to collect the item on time, no later than June 22, 2026! TECHNICAL DETAILS Workpiece width max.: 5,500 mm Workpiece height max.: 980 mm Number of working stations: 8 Number of cylinders per press level: 10 Number of clamping devices per press level: 10 Nledpfx Ahoy Tviuezsb MACHINE DETAILS Power of main motor: 1.5 kW Press drive: Hydraulic Dimensions & Weight Dimensions (L x W x H): 8,000 x 2,200 x 2,450 mm Unladen weight: 10,000 kg Transport packages: 1 EQUIPMENT CE marking Separate press stages Motorized rotation 2 working stations per side

Year of construction: 1999, condition: ready for operation (used), functionality: fully functional, workpiece length (max.): 2,200 mm, workpiece width (max.): 800 mm, workpiece height (max.): 40 mm, stroke length: 150 mm, machine/vehicle number: 52850199, TECHNICAL DETAILS Maximum plate size: 2,200 x 800 mm Maximum plate thickness: 40 mm Maximum stroke: 150 mm Working pressure: 6 kg/cm² Total working pressure: 160 tons MACHINE DETAILS Total power: 17.3 kW Heating power: 13 kW Voltage: 380 V Current: 35 A Dimensions & Weight Dimensions (L x W x H): 3,900 x 1,800 x 2,100 mm Weight: 5,900 kg EQUIPMENT Heating 8 cylinders, each with a diameter of 100 mm Nodpfx Ajy Tn R Rshzolb Heating boiler included

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 0-306-04-2737, functionality: fully functional, working width: 800 mm, conveyor belt length: 4,800 mm, feed rate X-axis: 37 m/min, working height: 1,400 mm, working length: 2,300 mm, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! TECHNICAL DETAILS Workpiece width max.: 800 mm Workpiece length max.: 2,300 mm Nlodpfx Ahsy Uwmqozeb Workpiece height max.: 1,400 mm Feed rate max.: 37 m/min MACHINE DETAILS Machine length: 4,800 mm EQUIPMENT Infeed conveyor Outfeed conveyor The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8536

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 0-306-04-1262, functionality: fully functional, working width: 600 mm, conveyor belt length: 3,000 mm, feed rate X-axis: 40 m/min, working height: 1,300 mm, working length: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! The machine must be picked up between June 10, 2026, and June 30, 2026! TECHNICAL DETAILS Workpiece width max.: 600 mm Workpiece length max.: 2,500 mm Workpiece height max.: 1,300 mm Workpiece width min.: 120 mm Workpiece length min.: 300 mm Workpiece height min.: 300 mm Feed rate max.: 40 m/min Conveyor belt length: 3,000 mm Nljdpfx Ahoy Uv Iyozjb MACHINE DETAILS Control system: NC 16 EQUIPMENT Unloading conveyor belt CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 8535

Condition: as good as new (ex-display), functionality: fully functional, type of input current: AC, SWIGRAPH - MARLON 5000 PVC Coil Forming Machine. Automatic PVC/PET forming machine for plastic coils. Coil diameter range: 6mm to 56mm Cut lengths: 7.62cm to 122cm Coil pitch: 4;1 Nsdpev Ifc Iefx Ahzjlb Power supply: 230 vac + external air supply

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P5-0174, working width: 530 mm, type of input current: AC, input voltage: 400 V, overall weight: 175 kg, space requirement height: 1,097 mm, space requirement length: 1,100 mm, space requirement width: 710 mm, input current: 15 A, table width: 1,070 mm, input frequency: 50 Hz, empty load weight: 105 kg, Equipment: safety light barrier, Double Loop closing machine for books and calendars. Adjustable sizes for all diameter rings up to 25 mm Footswitch controlled. Light beam safety guard. Nlsdorzuluopfx Ahzeb Power requirements: 380-415 v 50/60 Hz

Condition: new, RHTC 100 TON M/H-M/C-2 Hydraulic Press Model 100 TON M/H-M/C-2 Year 2025 Condition New Stock Number 2796 Working Width 1000 mm Stroke 380 mm Max Capacity 100ton Nlodpoxwk E Aefx Ahzeb

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, pressing force: 80 t, control type: CNC control, Equipment: safety light barrier, 1 Used Very Clean Amada 8025 cnc down stroke hydraulic pressbrake for sale The Amada HFT 8025 is a CNC hydraulic down-stroking press brake designed for precise sheet metal bending with an 80-ton pressing capacity. It is often equipped with the CD 2000 CNC control system, providing 4-axis control (typically Y1, Y2, X, and R) for high accuracy in industrial applications. Key Technical Specifications Year 2010 Feature Standard HFT 8025 Press Force 80 Tons (800 kN) Bending Length 2,500 mm Nodpfx Asyzy D Eehzelb Stroke Length 200 mm Open Height 470 mm Throat Depth 420 mm Motor Power 7.5 kW

Condition: used, Atom G222 STVL Clicking Press, Bed Area 900 x 430mm, Top Platen Area 370 x 530mm. Serial No. 75161. Country of Origin: Italy Nlsdpfxey Shg Aj Ahzsb Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: like new (used), Year of construction: 2020, working width: 340 mm, type of input current: AC, input voltage: 415 V, RENZ AP 360 Digital Automatic Paper Punching Machine. Excellent condition with little use. Working width: 360mm Punching per pick: 2.4mm Njdpfxjy S Tv Aj Ahzelb Max performance: 100,000 sheets per hour Power supply: 415 vac 3 phase

Condition: ready for operation (used), Year of construction: 2015, Well-maintained, used press brake from Durma. Type: AD S 25100 Capacity: 2550 x 100 tons Y1, Y1, X, and R axes CNC controlled Delem DA66T CNC control Njdpfx Ahoy Urp Hozslb CNC crowning Akas Fiesler laser safety system Amada/Euro clamping system Includes 1 set of tooling

Condition: reconditioned (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, year of last overhaul: 2025, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Nljdpfx Ahjy Urvaszsb Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The packing press has been fully overhauled in our workshop. The press is in very good condition; please see the demonstration video following the overhaul. The machine sustained transport damage whilst being moved. The control cabinet was damaged and slightly dented by a forklift truck, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 2,000 mm, filling opening length: 1,020 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, year of last overhaul: 2026, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Nsdpfxey Uruvj Ahzolb Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: AGO SP40/650, Hahn & Kolb AGO SP40/650 Manual Spindle Press – 40 Ton – Made in Germany Heavy duty industrial manual spindle press manufactured by Hahn & Kolb Stuttgart, Germany. Model AGO SP40/650, built in 1989 with 400 kN pressing force (approx. 40 ton). Extremely robust precision-built machine suitable for pressing, forming, straightening, assembly work, tooling and general engineering applications. Large flywheel operation with adjustable ram and heavy cast construction throughout. Machine Details: Manufacturer: Hahn & Kolb Stuttgart Model: AGO SP40/650 Year: 1989 Press Force: 400 kN (40 Ton) Manual spindle operated Heavy industrial cast construction Precision guided columns Made in Germany Nljdpfx Ahoy R Dxlszob Condition: Good used industrial condition. Clean machine with solid operation and very little wear for its age. Ideal for engineering workshops, fabrication shops, toolrooms or industrial production use. Loading available on site. Transport can be arranged. Open to sensible offers.

Condition: excellent (used), Year of construction: 2010, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFT 8025 downstroke CNC Press brake Year 2010 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 6100 kg Nodsu A Dgrepfx Ahzjlb Bed Length 2500 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Backguage Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, We offer this very good RYOBI 522HE offset printing press, year of construction 2004. Semi auto plate loading, One owner from new. Very clean machine. Njdeywaq Rspfx Ahzelb If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2015, Model Amada HFE MK2 5012 50 tons x 1250 , 4 axis CNC Press Brake Year 2015 Tonnage 50 tonnes Max. Bend Length 1250 mm Stroke Length 150 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 55L Motor Power 6KW Weight 2550 Kg Nodoyym Hkspfx Ahzelb guarding Erwin Sick machine mounted light screen,side and rear interlocked fencing Dimensions Machine Length 2000 mm Machine Depth 2300 mm Machine Height 2300 mm Distance Between Side Frames 1035mm Beam width 60 mm Table height 960 mm Open Height 370 mm Throat Depth 100 mm

Condition: good (used), Year of construction: 2008, Used 6-meter CNC press brake by Amada Type: HFE 400 6 L Capacity: 6100 x 400 tons Stroke: 350 mm Y1, Y2, X1, X2, R1, R2, Z1, and Z2 CNC controlled 9204 operating hours Weight: 36 tons Transport in 2 parts (main frame + separate lower table) Self-adjusting crowning system in the lower table Nlodpfxjy T Hltj Ahzsb 450 mm mounted on the floor foundation Dismantling and loading included

Condition: refurbished (used), Year of construction: 1994, machine/vehicle number: HFBO 125 30 H40402, stroke length: 3,000 mm, Fully refurbished in 2019, AMADA PROMECAM 125.3 press brake, year of construction 1994. Excellent Condition. If you have any questions or need more information, feel free to send us a message or give us a call. Nlsdpfx Ahsy Nibcozjb

Condition: good (used), Year of construction: 2004, Used conventional press brake by Baykal Type APH 3110 180 Capacity 3100 x 180 tons Njdpfxoy Tuiye Ahzjlb Adjustable back gauge and stroke adjustment Amada / Euro clamping system Includes 1 set of tooling

Condition: excellent (used), Year of construction: 2012, working area X .. 370 mm working area Y .. 700 mm pressure 28.0 t plate thickness max. 12.7 mm ST throat 310 mm height of stroke 0 - 40 mm no. of strokes max. 180 Hub/min punch diameter max. 105 mm 845 x 1420 mm work height max. 900 mm oil volume 50.0 l total power requirement 5.0 kW weight of the machine ca. 1800 kg range L-W-H 1800 x 1200 x 1500 mm New price including accessories approx. 35,000 euros Special price on request !! The machine was used continuously in a test area and as a result has very few operating hours !!! Nedpfey Umdfox Ahzelb The ECCO LINE hydraulic punching machine has been specially optimized for the processing of sheet metal and profile parts. It is characterized by its The machines of the ECCO LINE series are equipped with a punching force of LINE series are equipped with 28 tons of punching force in conjunction with the proven Trumpf tool system. Tool change time approx. 15 sec (manual) Mode of operation: After installing the tool, the stops are positioned in X and Y are positioned accordingly and the material is pushed against the stops. By the hole is then punched by pressing the foot pedal Features of the machine: - Maintenance-free hydraulic drive - Stepless stroke adjustment - Compact unit - Constant punching force Features: - Robust electro-hydraulic hole punch - TRUMPF tool system with many insert tools - Stop system with digital displays * Magnetic scale integrated into the side of the machine table * Scanning head integrated in the stops * Energy guiding chains for supply line to the scanning head * Evaluation electronics * Position indicators mounted on the stops * Stake-out device for zeroing the axes * Readout accuracy /- 0.1 mm - Control panel: set-up, single and continuous stroke - Stepless stroke height adjustment - Free-moving foot switch * with many punching tools !

Condition: good (used), Year of construction: 2006, Used 3-meter Bystronic press brake Type: PR 150 3100 Nljdpfx Ahjy Tml Hozsb Capacity: 3100 x 150 tons Y1, Y2, X, R, Z1, and Z2 CNC-controlled Cybelec ModEva 12 CNC control Hydraulic RFA top clamp Hydraulic Wila 13mm bottom clamp Includes 1 set of tooling as shown Year of manufacture: 2006

Condition: used, Year of construction: 1998, Briquette press Weima TH 400 Year of construction 1998 Briquette diameter 50mm Capacity 60-80kg/h Machine no. 950-756 Main motor 7.5kW 200 Bar, 400V Including large collection container Machine is currently not working, the hydraulic block is leaking. - Year: 1998 - Documentation available: No - CE certificate present: No Nedpfxowh I Ure Ahzolb Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2021, operating hours: 44 h, functionality: fully functional, HSM V-Press 860 plus vertical baling press, year of manufacture 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of manufacture: 2021 Operating hours: 44 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical cycle time in idle mode: 25 s Theoretical pressing capacity: 12 m³/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Nedpfx Ahsy Uvt Aozolb Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or any errors that may occur. The offers are non-binding, subject to prior sale and may be revoked at any time. Inspections are possible by arrangement. The sale takes place at our location, without warranty. Our payment terms are 100% prepayment.

Condition: repair required (used), Year of construction: 2003, REP rubber injection press Nedpeizi H Hefx Ahzelb 25 Tons Year : 2003 The 4 columns are to be changed (9000€ of expenses)