Used High Speed Press - Mechanical for sale (53,089)

Condition: used, Year of construction: 1976, Force: 160 tons Windows: 600mm Blodpscna Hfefx Amish Daylight: 420mm Ram adjustment: 80mm Table size: 1100x1100mm Ram size: 1030x800mm Hole in table: 680x250mm Stroke adjustable: 30-100mm Strokes per Minute: 40-1800 Power requested: 18,5KW, weight: 20 tons, height 3950mm Siemens control, ALBA roll feeder material 400x3mm

Year of construction: 1999, condition: good (used), Very nice high 10-t speed Japanese press with fixed stroke of 15 mm, rates from 0 to 2500 strokes per minute Bljdpfsim Iv Dsx Amish

Condition: used, Year of construction: 1992, functionality: unexamined, Technical Specifications Make and model: Bruderer BSTA 25 EL Nominal capacity: 250 kN, 25 tons Year of manufacture: 1992 Year of control upgrade: 2020 Max. number of strokes: 100/1425 Adjustable stroke: 13, 16, 19, 25, 32, 38 mm Table dimensions: 640 x 530 mm Passage between the supports: Longitudinal 640 mm; Lateral 220 mm. Fitted with roll feeder BBV 190/85 on right hand side. Max width of strip: 160 mm Feed length: variable up to 85 mm max Optional: Sound insulating cabin Oil pump. Heat exchange oil cooler. Front and rear safety guards. Fitted on 4 spring feet. Slide/Ram adjustment: 51 mm Bljdpsyktftofx Amijh Documentation included. Press weight cca. 5000 kg.

Condition: used, Year of construction: 1987, functionality: fully functional, table length: 950 mm, table width: 910 mm, pressing force: 80 t, overall weight: 16,500 kg, punching force: 80 t, Max. pressing force: 80 tons / 800 kN Strokes per minute: 100 - 1000 SPM Mains voltage: 400 V Mains frequency: 50 Hz, 60 Hz Bsdjxzr Rujpfx Amislh Power consumption: 43 kW Control voltage AC: 24 V Compressed air connection: 6–10 bar Stroke length adjustment: 16, 19, 26, 35, 43, 51, 58, 63 mm Ram adjustment: 76 mm Average upper tool weight: 600 kg Maximum tool width: 970 mm Bolster area: L–R: 950 mm F–B: 910 mm Ram area: L–R: 760 mm F–B: 510 mm Max. tool width (L–R): 970 mm Strip inlet height: Max.: 160 mm Min.: 70 mm Strip feeder (left): Bruderer BBV 202/120 Max. strip width: 202 mm Feed pitch: 0–120 mm Bed opening: L–R: 920 mm F–B: 320 mm Machine dimensions: Length: 2834 mm Width: 1742 mm Height: 3460 mm Total weight with 1× BBV 202: approx. 17,500 kg Electrical cabinet dimensions: Length: 1200 mm Width: 500 mm Height: 1025 mm Weight: approx. 250 kg The soundproof cabin is not included in the offer, but it can be purchased separately. We also have many additional Bruderer, Schaal, Mabu and Bihler press models in stock, as well as decoilers and strip straighteners.

Condition: good (used), High-Speed punching press - BSTA 18 /600 Stroke power 180 KN (18 tons) Overhauled by Silicon in good working condition Adjustable speed 60 - 600 (strokes) per minute up to 10 strokes in one second Equipped with synchronized double rolls BBV120 feed for strips widths from max. 120 mm Bodpfxe Udtyj Amielh Feed pitch up to max. 60 mm adjustable, highly accurate With stroke counter with programmable auto stop and speed counter Machine complete weight approx 1.5 tons Maximum strip width 120 mm Maximum strip thickness 2.2 mm Maximum feed pitch 60 mm Indexing per minute, infinitely variable 60 - 600 strokes Automatic in feed Operators instruction manual More high speed presses on stock made by Bruderer models BSTA 18, 20, 30, 200, 50 and Schaal and Mabu presses

Condition: good (used), machine/vehicle number: Blinie, BSTA 30 Number of strokes 600 spm Blsdpfx Asdguhcsmijh Feed BBV 120/60 Pressing force 30 T Maximum strip width 190 mm with CE certificate and warranty Machine rebuild Good condition More high speed presses on stock made by Bruderer models BSTA 18, 20, 30, 200, 50 and Schaal and Mabu presses

Condition: like new (used), Year of construction: 2024, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: QYKM-1400x2900, total height: 3,200 mm, total width: 4,300 mm, total length: 7,600 mm, overall weight: 2,500 kg, Equipment: documentation/manual, We are selling our as-new pizza box machine due to business closure. The machine was ordered from China. It is nearly new and operates flawlessly. All components are fully functional. Coating can be applied at any time. Bledpexvy Hmofx Amieh

Condition: used, Mechanical High-Pressure Machine Vice GRESSEL Type MHS 126-3 High-pressure clamping device Jaw width: 125 mm Jaw height: 40 mm Opening width: 221 mm Clamping force: 2 / 3 / 4 tons Guideway height: 62 mm - Clamping force adjustable in 3 stages - High-pressure vice with mechanical power amplifier - Clamping range adjustable in 2 stages Bjdpfsxlkvdsx Amijlh - Lateral thread for workpiece stop Dimensions: 440 x 140 x 102 mm Weight: 26 kg

Condition: good (used), Bacciottini Pit Stop AF High Speed ​​Automatic Creaser Fully operational and ready to use. Bedpfoy Nzkvsx Amijlh Manufactured in 2018. This is the most efficient creasing and perforating system on the market, with a robust design. Made in Italy. Non-stop vacuum feeding with the option of adding material during operation. Two independent compressors (suction and airflow). The set includes creasing and perforating tools. Machine with an enlarged format up to 1000mm. Technical data: Maximum sheet size: 500×1000 mm Min. sheet size: 100×150 mm Maximum speed (for A4 format): 10,500 sheets/h Material weight: 80-600 GSM Maximum number of creases per sheet: 100 Gap distance: 0.1 mm Setting accuracy: 0.1 mm Power supply: 400 V Power consumption: 3.5 kW Weight: 233 kg Dimensions: 170 x 85 x 120 cm

Condition: new, functionality: fully functional, power: 3 kW (4.08 HP), Year of construction: 2025, Equipment: air conditioning, cooling unit, G16 Type: Two chucks Bodswz Ufwopfx Amislh

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal Bedpfx Amjwz Ukyjijlh

Condition: not inspected (used), functionality: unexamined, pressing force: 50 t, stroke length: 40 mm, overall weight: 3,000 kg, rotational speed (max.): 500 rpm, rotational speed (min.): 100 rpm, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you commit to timely collection between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Pressing force: 50 t Ram stroke: 16 - 40 mm Flywheel speed range: 100 - 500 rpm Bjdpfx Amjza Thyoijlh Decoiler diameter: 1,000 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,000 x 2,200 mm Machine weight: 3,000 kg External reference: 43

Condition: ready for operation (used), functionality: fully functional, spindle speed (max.): 30,000 rpm, controller model: Siemens Simo Drive 611, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle speed: 30,000 rpm MACHINE DETAILS Control system: Siemens Simo Drive 611 EQUIPMENT Working spindle Spindle completely overhauled (02/2020) with measurement report Power unit with remote control Spraying device Blodpszaquqofx Amijh External reference: 763

Condition: excellent (used), Year of construction: 2005, Ref: 11098 . 2005 Muller Martini ‘Corona CC-12’ EVA / PUR High Speed Perfect Binder. Excellent condition! Only 36,800 hours worked! Comprising: 36 x 3695/24” top loading feeders with sequential stop/start + handfeed station ‘ASAC’ copy control system with 3714 downstream shut-off element Jogging unit 3643 and Spiral Raceway element 3641 Bjdpfx Aoy Ib S Romielh M.M. automatic motorised make-ready with “Commander” Control System. Programmable with data retrieval, menu-guided set-up and on-the-run adjustment Book transfer section with 25 kW drive motor M.M. ‘Corona CC12-23’ with 22 x 23” Combi-clamps Spine preparation units with cutting/milling/sanding/brushing Interchangeable spine gluing units, comprising; ICS30 EVA hot-melt side glue pre-melt tank 30 ltr. ICS80 EVA hot-melt spine glue pre-melt tank 80 ltr. PUR pre-melt unit PUR spine glue unit EVA hot-melt spine glue unit EVA hot-melt side glue unit Stream cover feeder with nipping Lay-down delivery unit to: Flat conveyor system (details on request) to: NO TRIMMER (trimmer can be found and added) Specification: 3695/24" Gatherer - sig. sizes, Max: 500 x 320 mm Min: 140 x 100 mm CC12/24” Binder book sizes, Max: 510 x 305 mm Min: 140 x 100 mm Book thickness : 3 -- 60 mm Clamp opening, Max: 80 mm Open cover width : 203 - 642 mm Mechanical speed, Max: 12,000 cycles/hr.

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system Blodpfsy Ulu Nsx Amish -Manufacturer: EWM, PULS MIG/MAG welding machine -Type: LUD320W -Max. welding power: 500 A -Features: Water-cooled -Wire feeder case: HIGH-SPEED integral 4X4S 4-roller drive -Dimensions: 1370/820/H1500 mm -Weight: 242 kg

Year of construction: 2019, condition: excellent (used), The Smipack FP6000CS is a high-speed, fully automatic L-bar sealer. Featuring continuous sealing ("CS") and a motorized center seal, it excels at packing a wide variety of items with centered high-quality seals. The "CS" designation signifies the addition of a motorized center seal that adjusts the longitudinal seal to the vertical center of the product Machine Type: Fully automatic L-bar sealer Sealing System: Continuous sealing ("CS") with hot knife / PTFE-coated blade Sealing Bar Dimensions: 640 mm 510 mm Max Pack Height: Up to 200 mm \ 7.8 inches Max Foil Width: Up to 600 mm Production Output: Up to 3,600 packs per hour (depending on product size and film used) Bljdpfey Synfex Amijh Conveyor Speed: 10 to 30 m/min, electronically adjustable via inverter Power Supply: 220 - 240 / 380 - 415 V | 3PH + PE / 3PH + N + PE | 50/60 Hz Installed Power: 3,350 W Usable Films: Polyolefin and Polyethylene up to 30 mu

Condition: good (used), Year of construction: 2000, pressing force: 15 t, table width: 300 mm, table length: 400 mm, Hydraulic clutch CE-Safety 2e hand opperator system Adjustable stroke / ram  Full set books / drawing / CE-Mark Note in the Neck / Throath machine is repaired ! Only EUR 5500 Capacity Kg: 15000 Table Length: 400mm Table Width: 300mm Hole in table:150mm Working height:280mm Throat: 2170mm Blodpfxeyc R Nme Amish Stroke: 50mm Ram adjustment:4 - 80mm Length: 1500mm Width: 1500mm Height: 2100mm Weight: 1200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2000, Capacity Kg 15000 Table Length 400 mm Table Width 300 mm Hole in table 150 mm Working height 280 mm Throat 2170 mm Stroke 50 mm Ram adjustment 4 - 80 mm Hydraulic Clutch CE-Safety 2e hand opperator system Adjustable stroke / ram  Full set books / drawing / CE-Mark Length:1500mm Width:1500mm Height:2100mm Bjdpsyc R Uiofx Amiolh Weight:1500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1979, Technical details: pressure: 250 t slide stroke: 40-160 mm throat: 545 mm ram adjustment: 110 mm Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm drawing capacity: 16 to table height over floor: 1000 mm surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW Bedpfx Ameu Nfinoijlh weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Data at bottom dead center UT: largest stroke: 510mm smallest stroke: 570mm Accessories: - Steel plate 1170x860x80mm *

Condition: good (used), functionality: fully functional, quill stroke: 190 mm, spindle speed (min.): 41 rpm, spindle speed (max.): 1,800 rpm, overall weight: 1,920 kg, workpiece weight (max.): 17 kg, sheet thickness steel (max.): 32 mm, torque: 250 Nm, table height: 900 mm, branded DONAU high speed radial drilling machine type DR 32 - completely overhauled by vaumatec in 2022 - with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain as well as 4 adjustable feet to relieve the table frame) Technical data: Drilling capacity into solid material: St 60/E335 mm Ø 32 (at feed rate 0.20 mm/rev): GG 22 mm Ø 45 Thread cutting: St 60/E355 M26 Thread cutting: GG22 M35 Tool holder: MK4 Column diameter: mm Ø 195 Distance between spindle nose and table: min./max. mm 260/660 Work table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds Speed series I : rpm. 41-1800 Feed rates: mm/rev 0.1-0; 15-0; 20-0.3 Torque at the spindle: max. Nm 250 Smooth running of the boom: Radial N 25 Smoothness of the arm: Axial N 25 Clamping effect: Radial Nm 3500 Clamping effect: Axial N 5500 Feed force: N 7500 Bsdpsrn Riqefx Amiolh Max. permissible mass: kg 17 Max. permissible moment of inertia: kgm 0.002176 Workpiece: max. table load: kg 1000 Center of gravity: in the middle of the work surface

Condition: used, High-performance baler MACFAB - BEMA type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Manufacturer no. MF J0162 Year of manufacture 2021 Pressing force 50 tons. Press plate stroke approx. 1000 mm Cycle time per stroke approx. 40 sec. Pressing chamber floor area 1500 x 1100 mm Pressing chamber height 1650 mm Filling opening 1500 x 870 mm Filling height approx. 1250 mm Bsdpsvq Rtkofx Amiolh Bale format 1500 x 1100 mm Bale height max. 1100 mm Hydraulic operating pressure 200 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz, 12 amps. - with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Pressing operation only with the pressing chamber door closed - 2-hand operation for hydraulic tipping of the finished pressed bale - Free space for manual strapping - Standard industrial bales of 1500 x 1100 x 1100 mm are produced - the highly compressed bale is automatically tipped onto a pallet - only 62 operating hours Space requirement L x W x H 2120 x 1350 x 3220 mm Height for transport with lowered hydraulic cylinders approx. 260 cm Weight 1.8 ton. The machine is in very good condition, as good as new. The press has a new price of EUR 22,200 net at BEMA The BEMA company also buys the packaging waste that you press into bales with this press.

Condition: good (used), Year of construction: 1998, functionality: fully functional, DONAU DANUMERIC 440, year of manufacture 1998 Technical specifications: - Table 1800 x 600 mm, 4 T-slots - Drilling radius 540 – 1590 mm Bodpfxsy Txlre Amislh - Spindle taper SK40 - Speed range 15 – 2800 rpm - Motor power 5.5 kW - Weight approx. 2,800 kg

Condition: ready for operation (used), Industrial CNC router for sale – AXYZ Automation Group Automation Series 6010, fitted with a high-speed Perske GmbH spindle. This is a large-format production machine suitable for woodworking, plastics, signage, and light aluminium work. Solid gantry construction with vacuum bed – ideal for sheet materials. ⚙️ Key Specs Model: AXYZ 6010 (6000 Series) Bed Size: approx. 10ft x 6ft (3048 x 2150mm) Spindle: Perske high-speed spindle Bjdpfx Aey A R Dxjmislh Power: approx. 4kW / 5.5HP Speed: up to 18,000 – 21,000 RPM Bed: Vacuum table (grid type) Axes: 3-axis gantry CNC Power: 3-phase Build: Heavy-duty industrial frame

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and travel paths Tool holder SK 40 Table dimensions mm 4000 x 800 Number of T-slots 6 Distance between T-slots mm 140 Distance between spindle bottom edge min. mm 140 Table top edge max. mm 740 Drilling radius min mm 540 max. mm 1590 U-axis travel path mm 2600 Y-axis travel path mm 1050 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 400 Cutting values Drilling capacity into solid material St 60 mm 40 GG 22 mm 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 200 Feed drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 U-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min. 7.5 / 3 Feed rates infinitely variable mm/min. 5 - 2000 Feed force N 12000 Accuracy Positioning accuracy X, Y axis up to 1200 mm mm ± 0.075 Repeatability X, Y axis mm ± 0.03 Positioning accuracy Z axis mm ± 0.05 Repeatability Z axis mm ± 0.03 Positioning accuracy W axis mm ± 0.05 Repeatability W axis mm ± 0.03 Bledpfsv If T Tex Amish Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 13.0 CNC control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat screen backlit, easy to read from all sides Position information: Cartesian or polar, dimensions absolute or incremental, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, cutting data suggestions depending on material Tool management: max. 500 tools Sub-program technology: yes Machining cycles: cycles for centering, drilling, thread cutting, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible for each cycle Chip breaking / chip removal: possible for drilling cycle Drilling patterns: row of holes, circle of holes, matrix Basic software: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually touching the workpiece for: - any clamped right-angled parts - any clamped round parts - mediation of cast and burnt parts - Angular position detection for round parts by touching - reference edges or surfaces Data interfaces USB interface Painting (new painting) Standard painting, two-component textured paint Machine upper part light gray RAL 7035 Machine lower part signal blue RAL 5005 Documentation Operating and programming instructions Electronics circuit diagram Spare parts drawings Test report for mechanics, electrics and safety equipment

Condition: used, Year of construction: 2000, functionality: fully functional, feed length X-axis: 4,000 mm, feed length Y-axis: 1,050 mm, feed length Z-axis: 200 mm, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and Travel Ranges Tool holder: SK 40 Table dimensions: mm 4000 x 800 Number of T-slots: 6 T-slot spacing: mm 140 Distance: - Spindle bottom edge: min. mm 140 - Table top edge: max. mm 740 Boring radius: - min. mm 540 - max. mm 1590 Travel range U-axis: mm 2600 Travel range Y-axis: mm 1050 Quill stroke (Z-axis): mm 200 Column stroke (W-axis): mm 400 Machining Data Drilling performance in solid material: - St 60: mm 40 - GG 22: mm 50 Thread cutting: - St 60: M 36 - GG 22: M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque: Nm max. 250 Constant from: min-1 15 - 200 Feed drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 U-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min 7.5 / 3 Feed rates, infinitely variable: mm/min 5 - 2000 Feed force: N 12000 Accuracy Positional accuracy X, Y axis at 1200 mm: mm ± 0.075 Repeatability X, Y axis: mm ± 0.03 Positional accuracy Z axis: mm ± 0.05 Repeatability Z axis: mm ± 0.03 Positional accuracy W axis: mm ± 0.05 Repeatability W axis: mm ± 0.03 Electrical data Operating voltage / frequency: V / Hz 400 / 50 Control voltage: V 24 Total connected load: kVA 13.0 CNC control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat screen, backlit, easily readable from all sides Position data: Cartesian or polar, dimensions absolute or incremental, Unit of measurement: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technology: yes Machining cycles: Cycles for centering, drilling, threading, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible in each cycle Chip breaking / chip removal: possible in drilling cycle Drilling patterns: Hole pattern, hole circle, matrix Basic software: Programming in dialog mode, 38 zero-point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - aligning cast and sintered parts Bljdpfx Aoy Ttrtomish - Angle detection for round parts by probing the reference edges or surfaces Data interfaces Paint finish with signs of use Standard paint finish, two-component textured paint Machine upper part: light grey RAL 7035 Machine lower part: light blue RAL 5012 Documentation Operating and programming manual Electrical wiring diagram Spare parts drawings Test report for mechanics, electrical system and safety devices