Used Hofmann Wheel Balancing Machine for sale (81,630)

Condition: new, Cardan shaft balancing machine BVI-03-74 Available in stock in Poland !!! Delivery time: one day!!! . . Machine for driveshafts weighing up to 150kg and up to 4700mm long. Suitable for small workshops with a large range of different shafts, including trucks. This balancing machine has high productivity and serves to balance the cardan shafts of cars and trucks. It makes the process of balancing the cardan shaft easy thanks to many technical solutions, while the machine has an affordable price, which reduces your financial burden and allows you to develop your business effectively. . . TWO TIMES faster than your machine. This balancing machine is majored to balance the shaft not only qualitatively, but also quickly. If you can balance in 2-2.5 times faster, then this is your real competitive advantage. . . HIGH PERFORMANCE ACCESSORIES The machine is equipped with three main types of adapters: 1. Fast clamping universal adapters. It has two main advantages: The first is that due to the special design the driveshaft flange is clamped within 5 seconds. This advantage is due to the fact that the driveshaft flange does not need to be fixed with bolts. THE SHAFT CAN BE CLAMPED 4 TIMES FASTER WITHOUT BOLTS. The second advantage is the centering rings. The driveshaft is mounted in the adapters with centering rings that can be made on an ordinary lathe to fit most common driveshafts. 2. KV Flange adapters. Used for balancing shafts with cross-tooth flanges. Applies to four flange sizes: 120, 150, 180, 205 mm. Usually used on truck driveshafts. 3. Adapter with slots. Used to mount various flanges with holes. Mounting the driveshaft is the same as on universal adapters, with the help of centering rings. KEY FEATURES Nwjdpfopbv Tfox Aazel • Balancing of 2, 3 and 4-support cardan shafts • Shaft length up to 4700mm, weight up to 150kg • Cardan installation in 1 minute • Standard set of adapters - Installation of 80% of cardan shafts; • Three ways of fixing the center bearing • Soft-bearing type machine - high sensitivity to any vibration • Machine is operated by one worker • Sliding bearing supports - quick changeover, comfortable operation • Safety bracket with clamp for quick installation • Measurement in all planes at one time • Calibration of the machine by the operator • Displays imbalance in real time • Create and print reports SPECIFICATIONS Maximum cardan shaft weight 150 kg Maximum flange diameter 300 mm Maximum length of cardan shaft 4700 mm Number of machine supports 4 Number of simultaneously measured planes 2, 3, 4 Minimum achievable residual specific imbalance, 10 g mm/kg Rotor speed range 1000-2000 rpm Power supply 380V, 3 Ph, 50Hz Power, minimum, 2,2 kW Dimensions (length x width x height) 6000 х 1100 х 1450 mm Weight 700 kg ! We manufacture а full range of equipment for drive shaft balancing and repair service. Please contact us to get the best offer!

Condition: new, The 9D717 balancing machine is a versatile and reliable tool for balancing a wide range of rotors from 15 to 1500 kg. This machine is capable of balancing different types of rotors, including inboard and outboard cantilever rotors, rotors on special mandrels and rotors in their own bearings. The machine's design is simple yet functional, allowing it to easily balance armatures, generator rotors, impellers and fan wheels, even with large initial imbalances. In addition, the machine can balance rotors in their own bearings, saving repair time and preventing damage to the rotor trunnions. It is suitable for determining and eliminating unbalance on rotors of electric motors, metallurgical gears, screws and printing equipment. The 9D717 balancing machine is also capable of balancing disc-type parts such as impellers and smoke pump impellers, as well as correcting unbalance on shaft-type parts such as threshing drums and combine rotors. Overall, this machine is highly versatile and effective in balancing various types of rotors, making it ideal for repair and production shops. HIGHLIGHTS • The specially designed rollers use advanced patented “Exact Barrel” grinding technology and are mounted on precision bearings. • The monolithic design of the supports and base eliminates vibration losses during balancing by reducing the number of "oscillating system" elements. • Allows large initial unbalances to be measured without destroying the machine, and rotor unbalance to be corrected directly on the machine. • The low natural resonance frequency of the supports allows the rotor to be balanced at low speeds. • The width of the support rollers and roller block allows the installation of rotors with very short rotor bearing journals. The modular design allows rotors with unusual configurations to be mounted using spacers or tools. • The height of the roller block is adjustable, allowing rotors with different journal diameters to be balanced. • The belt drive has a patented "Long stroke" design that allows any rotor to be rotated using only two drive belts. • The frequency converter drive provides smooth acceleration and deceleration of the electric motor and infinitely variable speed control of the rotor. MEASUREMENT AND CONTROL • We make balancing easier - the main advantage of our balancing systems. • The balancing process is displayed in real time and the unbalance behaviour of the rotor is monitored on the screen to achieve the best possible result. • The maximum sensitivity of the machine at any moment of operation, the set-up and calibration of the machine is carried out by the operator himself. • Free from the influence of external vibration factors on the measurement result, it has a high degree of protection against various types of interference. • Easy to learn working skills and maintenance for any employee. SPECIFICATIONS Weight range of balanced rotors 15 - 1500 kg Maximum rotor diameter (above the bedding) 1800 mm Distance between centres of rotor supports 360 – 3000 mm Support type Rollers Transmission element for rotor rotation Belt / Cardan Minimum achievable residual specific unbalance 0.4 g*mm/kg Rotor speed range 300 – 1500 rpm Electric motor power 7.5 kW Parameters of the supply network 380V, 3 Ph, 50Hz Do you need a machine for a different load capacity, diameter or length? We manufacture balancing machines for every needs. Nwsdpfx Aopdpn Uoazjl Please contact us to get the best offer! 👇

Condition: new, VSR turbocharger high-speed balancing machine SBR-10 SBR-10 professional specialised equipment for high-speed balancing of assembled turbo cartridges. Equally useful for car and truck turbocharger. The machine was designed for entry level turbocharger repair workshop, including medium re-manufacturers. It solves a wide range of tasks that repair centres face on a daily basis. The SBR-10 simulates the same testing and balancing conditions as the turbocharger on the vehicle, this allows the quality of the repair to be guaranteed. It also allows checking turbocharger for oil leakage. A well-balanced turbocharger has a long service life which reduces the return rate of turbochargers and helps to build up your reputation. HIGHLIGHTS Mounting the cartridges on their standard surfaces (as on the engine) allows the installation of almost all turbochargers. Wide range of accessories and adapters for installing any kind of turbos Includes adapters for installing turbochargers with lower oil inlet and reverse rotation turbines Oil system with oil heating allows to recreate similar conditions to the real one during balancing. The turbocharger rotation and measurement is automatic. The cycle includes acceleration to maximum speed, measurement during the cycle, and air shutdown. Emergency shutdown is provided in case of extreme vibration increase, which prevents cartridge destruction even in case of assembly errors Automatic cycle allows to carry out vibration measurement in a short and sufficient period of time. Vibration measurement of the turbocharger housing - up to a value of 10G, which 2 times better than other analogs. KEY FEATURES • car and truck turbocharger balancing • Any turbocharger installation • All type turbocharger adapters • Reverse rotation adapters • Balancing speed up to 300 000 rpm • Fast oil heater and temperature regulation • 3-stage oil filtration • Real-time unbalance measurement • Automatic cycle turbocharger balancing • An industrial fanless touch screen pc control system • Access to self-editing of the data base • Creation and printing of reports on turbocharger balancing SPECIFICATIONS Maximum compressor wheel diameter 120 mm Maximum rotation speed 300 000 rpm Pneumatic system operating pressure 0,8 – 1,0 MPa Minimum air receiver volume 1000 L Power supply 220V, 1Ph, 50Hz Power input 1,5 kW Dimensions 1120 х 780 х 1274 mm Weight 285 kg We manufacture fuul range turbo repair equipment. Please contact us to get more info! Njdonfvmhspfx Aazswl 👇

Condition: used, NC universal tool milling machine MAHO type MH 700 P with HEIDENHAIN TNC 121 linear control . 71247 Circuit diagram no. ET 226 Built in 1979 Travel paths X: 600 mm, Y: 400 mm, Z: 400 mm Table size 900 x 500 mm Spindle mount ISO 40 Spindle speed 40-2000 rpm, 18 steps Feed rate X, Z-axis 1 - 600 mm/min, continuously variable Feed rate Y 1 - 300 mm/min, continuously variable Rapid traverse X, Z-axis 1.5 m/min Rapid traverse Y-axis 0.75 m/min Vertical spindle travel 80 mm Horizontal spindle travel 80 mm Spindle drive 4 kW Power supply 380 V, 50 Hz, 10 kW - HEIDENHAIN TNC 121 NC linear control - Vertical milling head with automatic Quill feed - Hydro-mechanical tool clamping - Coolant system in the machine base - Universal built-in rotary table, swiveling and tilting via threaded spindles +/- 30° - Universal built-in rotary table with manual transverse adjustment of 200 mm - Universal built-in rotary table with 360° rotation function and hydraulic clamping - Rotary table with direct indexing 72 x 5° and indirect indexing via hole plate 1:120 = 1 rev = 3° - Pivoting control panel - Central lubrication system - Electrical diagram Space requirement L x W x H 2000 x 1650 x 2250 mm Nedpfjwd Szbsx Aazswl Weight approx. 2800 kg Good condition

Condition: used, Year of construction: 1977, Mobile excavator Manufacturer: Liebherr Type: A 921 C Year of manufacture: 1977 Nwsdpozrzymjfx Aazel Weight / operating weight: approx. 18,000 kg Engine oil and oil filter changed - All diesel filters changed - Diesel tank cleaned and recoated - Hydraulic oil changed - Air filter changed - Excavator greased - 2 new batteries - Operating hours approx. 10,300 hours - Tires approx. 70% - Excavator bucket width approx. 1.2 m - Excavator fully functional Transport length: approx. 8.50 – 9.00 m Transport width: approx. 2.48 – 2.50 m Height (above cab): approx. 3.15 – 3.20 m Engine & Drive Engine type: Deutz F6L 912 (air-cooled 6-cylinder naturally aspirated diesel) Power: approx. 100 – 106 hp (70 – 78 kW) at 2,300 rpm Displacement: 5.6 liters (5,652 cm³) Cooling system: Air cooling (very low maintenance, ideal for cold starts) Maximum speed: approx. 20 km/h (Hydrostatic drive with stepped control) Hydraulics & Working Equipment Hydraulic system: Hydromatik axial piston pumps with performance-controlled sum control Hydraulic oil tank capacity: approx. 270 liters Diesel tank capacity: approx. 228 liters Standard deep bucket volume: approx. 0.60 – 1.00 m³ 22926

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm Nodpfx Asv R E Rdeazswl - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: used, CNC universal tool milling machine DECKEL, type FP 4 MA Machine No. 2204-1734, Serial No. 25842, Year of manufacture 1989 CNC path control: GRUNDIG Contur 2 Travel distances: X: 485 mm, Y: 385 mm, Z: 380 mm Table size: 800 x 460 mm Spindle mount: ISO 40 Spindle speed: 63 - 3150 rpm, 18 speeds Feed rate: max. 2000 mm/min Distance table - spindle nose: max. 480 mm Arbor displacement, vertical: 80 mm Arbor displacement, horizontal: 150 mm Main spindle drive: 3.7 / 4.4 kW Power supply: 400 V, 50 Hz, 13 kW - CNC path control: GRUNDIG Contur 2 with TFT screen - Hydro-mechanical tool clamping - Swiveling control panel - Electronic handwheel for all three axes - Mechanical handwheels for all three axes - Fixed angular table Nodozwmc Ropfx Aazswl - Coolant system in the machine base - Central lubrication - Control cabinet located next to the machine, dimensions W x D x H: 800 x 750 x 1150 mm Space required, dimensions W x D x H: 2400 x 2300 x 2000 mm Weight: approx. 2400 kg In good condition

Condition: ready for operation (used), The Klingelnberg PSR 500 U worm gear testing machine was designed as a universal machine for the flexible testing of worm gears and is used by manufacturers of gear and transmission technologies for the single-flanking rolling test process for worm gear sets (EFWP). Technical data: Max. worm gear diameter: 500 mm Max. spindle length: 500 mm Max. spindle diameter: 200 mm Center distance: 0 ... 400 mm Max. measuring speed: 60 rpm Braking torque: 2.5 Nm Max. worm gear weight: 150 kg Max. spindle weight: 50 kg Table diameter: 300 mm Machine weight: 800 kg Nwsdpfx Aszxghvsazjl Dimensions: 1500 x 1500 x 1600 mm The following parameters can be measured here: • Flank deviations Fi', fi', fl', fk' • Flank clearance, runout, roundness (option) • Contact pattern with digital camera • Pitch deviation • FFT analysis, spectrum *Image shows the machine in its current condition as a retrofit/modernized unit. *Further information about the machine is available upon request.

Condition: ready for operation (used), The WS 1250 CNC gear shaping machine features a configuration comparable to the Lorenz LS 1000 or LS 1250 models, is designed as a universal machine, and is employed by manufacturers of gears and transmission technologies for the process of gear shaping. Technical Data Diameter: 1250 mm Nwedpfeyw Hxnex Aazjl Module: 12 mm Face width: 210 mm Dimensions: 3,750 x 2,500 x 3,600 mm Machine weight: approx. 19,000 kg *All details and data are non-binding. Subject to prior sale. Special Features: The machine is equipped with a digital CNC control by Siemens type 840 D, as well as digital servo motors and drive amplifiers. The control cabinet is air-conditioned. Sinumerik 840 D: PCU 50, 566 MHz, 256 MB RAM, NCU 572.4, 3-axis/spindle, NC memory 2.5 MB, PLC memory 96 KB, 19” flat operating panel OP 10 C, 10.4” flat screen, electronic handwheel for linear axes, diagnostic system for error messages, warnings, and informational texts.

Condition: used, functionality: fully functional, total height: 1,100 mm, table diameter: 310 mm, overall weight: 5,000 kg, total width: 2,300 mm, total length: 1,800 mm, For sale is a gear hobbing machine as shown in the attached pictures. Manufacturer: LORENZ Max. wheel diameter: 500 mm Max. module: 5 Max. gear width: 100 mm Max. gear shaping length: 75 mm Number of strokes/min of the cutter: 45 / 424 Cutting speed: 18 Screw diameter: 78 mm Max. gear shaping diameter: 500 mm Max. external shaping diameter: 500 mm Nodezz Ilnjpfx Aazswl Max. internal shaping diameter: 450 mm Hole diameter of the table: 125 mm Diameter of table: 310 mm Total power: 3.0 kW Voltage: 220 / 380 V

Condition: used, Year of construction: 1985, machine/vehicle number: 0440298, Wheel diameter: 500 Minimum wheel diameter: 50 Maximum external ring diameter of the machined wheel with internal gearing: 800 Maximum distance from ram axis to table axis: 355 Minimum distance from ram axis to table axis: 0 Maximum number of teeth on machined wheel: 300 Minimum number of teeth on machined wheel: 12 Smallest module: 1.5 Largest module: 8 Table diameter: 500 Nwsdpoywh N Iefx Aazsl Table bore: 120 Bore depth: 650 Year of manufacture: 1985 Weight: 5,200 kg

Condition: refurbished (used), Shot blasting machine, Turntable Shot Blas Machine, abrasive blasting machine, surface treatment machine, Wheelabrator-Berger, Used Machine Manufacturer: Wheelabrator-Berger Maschinenfabriken GmbH & Co. KG Machine No.: 8502 Order No. (Kom. Nr.): 80305 Overall Dimensions Width: 2000 mm Depth: 2150 mm Height: 3900 mm Njdpfx Aaszbqp Dozewl Dust Collector Dimensions Width: 1400 mm Depth: 1270 mm Height: 3500 mm Dust Collector Manufacturer: Abrasiv Technical Specifications Automatic cleaning process with air blow-off Total electrical power: 15 kW Refurbished shaft and belt pulley Two electric motors have been rewound

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, wheel diameter: 400 mm, overall weight: 4,000 kg, distance between centers: 550 mm, spindle speed (max.): 3,000 rpm, controller model: Siemens 840 D, TECHNICAL DETAILS Max. wheel diameter: 400 mm Workpiece diameter: 36–400 mm Centre distance: 135–290 mm Max. spindle speeds (infinitely variable): 3,000 rpm Centre width: 100–550 mm Njdpfx Ajywg Hxeazswl MACHINE DETAILS Control: CNC Siemens 840 D Dimensions & Weight Space requirement: approx. 2,000 x 3,055 x 2,788 mm Machine weight: approx. 4,000 kg EQUIPMENT Single-flank rolling test Double-flank rolling test Structure-borne noise testing Helical contact testing (double-flank contact) Use of up to 6 test carriages Highest test accuracy and repeatability Machine table with workpiece drive Swivelling pneumatic unit Spray lubrication (Type: Vogel) Oil mist extraction (Type: Elbaron)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 13230, wheel width: 25 mm, wheel diameter: 130 mm, controller model: Siemens 840D, spindle diameter: 85 mm, stroke rate (max.): 2,500 1/min, TECHNICAL DETAILS Nwjdpszb Dtcefx Aazsl Wheel diameter max.: 130 mm Wheel width: 25 mm Module max.: 3 Module min.: 0.5 Ram spindle diameter: 85 mm Stroke rate: 500 - 2,500 strokes/min (continuously adjustable) Stroke: 30 mm MACHINE DETAILS Control model: Siemens 840D Total power requirement: 48 kVA Dimensions & Weight Space requirement (L x W x H): 4,700 x 3,000 x 3,300 m Machine weight approx.: 11.5 t EQUIPMENT Tailstock with point Chip conveyor Hydraulically actuated tailstock arm and linear guides

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Round stock milling machine, Stellmacher, type RST310/3-3 SE, for the production of cylindrical milled wood with a diameter of 150 to 310 mm, with an electric drive of 45 kW for the milling head. The feed rate is adjustable from 1 to 12. There are two roller conveyors on wheels for feeding and removing the wood. Nodpfjy Ta Ibjx Aazjwl

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 0440298, table bore: 120 mm, table diameter: 500 mm, overall weight: 5,200 kg, gear diameter: 500 mm, TECHNICAL DETAILS Wheel diameter: 500 mm Minimum wheel diameter: 50 mm Maximum external ring diameter of processed gear with internal gearing: 800 mm Maximum distance from shaping axis to table axis: 355 mm Minimum distance from shaping axis to table axis: 0 mm Maximum number of teeth of processed gear: 300 Minimum number of teeth of processed gear: 12 Smallest module: 1.5 Largest module: 8 Table diameter: 500 mm Table bore: 120 mm Nsdpfx Ajyx U T Aeazowl Bore depth: 650 mm MACHINE DETAILS Weight: 5,200 kg

Condition: ready for operation (used), Year of construction: 1989, AUTOMATIC GEAR GRINDER – 2 units available Manufacturer: CSEPEL Model: FKA 326-10 THE MACHINE USES THE FASSLER DRESSING METHOD. • Gear diameter: 320 mm • Module range: 0.5 – 6 • Slide stroke: 180 mm • Number of teeth: 10 – 260 • Max. workpiece weight: 80 kg Nodpfx Aszxzlieazswl • Clamping length: 420 mm THE MACHINES ARE COMPLETE WITH NUMEROUS ACCESSORIES: GRINDING WHEELS, WHEEL HOLDER, FASSLER DRESSING TOOL, CHANGE GEARS.

Condition: ready for operation (used), Year of construction: 1989, • Gear grinding machine NILES ZSTZ 08 CNC Njdpfezk Hfrjx Aazewl • CNC: Fanuc 180i-M • Minimum/maximum module: 2/14 • Maximum grinding diameter: 800 mm • Maximum grinding diameter without tailstock: 1000 mm • Minimum grinding diameter: 50 mm • Grinding wheel speed: 2450 rpm • Maximum helix angle: 45° • Rotary table diameter: 630 mm A set of change gears is available.

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 68910, workpiece weight (max.): 5,100 kg, wheel width: 180 mm, grinding wheel diameter: 330 mm, helix angle: 45 °, rotational speed (min.): 1,100 rpm, rotational speed (max.): 1,900 rpm, type of input current: AC, wheel diameter: 10 mm, gear diameter: 330 mm, overall weight: 5,100 kg, total height: 2,300 mm, total length: 6,000 mm, total width: 4,500 mm, Wheel diameter - max. 10 - 330 mm Wheel width 180 mm Module - max. 7 Module - min. 0.5 Clamping length 420 mm Number of teeth 10 - 600 Helix angle - max. +/- 45° Speed 1100 - 1900 rpm Grinding wheel diameter 280 - 350 mm Grinding wheel width 84 - 104 mm Machine weight approx. 5.1 t Required space approx. 4.5 x 6.0 x 2.3 m Grinding oil filtration unit Reishauer AF Nwodpfeykrmcox Aazjl

Condition: good (used), Gear hobbing machine using the Fellow system, brand Alfred Herbert, max diameter 180 mm, max module 4, in good condition. Nodsy Swmfspfx Aazowl

Condition: ready for operation (used), Year of construction: 1989, Gear grinding machine NILES ZSTZ 10 H Table diameter: 1000 mm Max. working diameter: 1250 mm Nwjdpezk E U Eofx Aazsl Module: - Min.: 2 - Max.: 25 Max. helical angle: 45 degrees Max. workpiece weight: 4000 kg Number of teeth: 10-250 mm Dimensions: 7700x4540x3320 mm Machine weight: 30 tons A set of change gears is available. Video of the machine in operation is available!

Condition: used, Year of construction: 2024, overall weight: 17,000 kg, workpiece length (max.): 500 mm, workpiece height (max.): 1,200 mm, workpiece diameter (max.): 800 mm, MAXIMUM Ø800 PROFILE GRINDING. OPERATIONAL CONDITION. Nwedpfx Aaozrzwfjzol

Condition: good (used), Year of construction: 1973, FELLOWS 70-15 GEAR SHAPER - Model 70-15 Fellows heavy duty vertical gear shaping machine , suitable for the manufacture of external straight spur gears up to 70" pitch diameter, as well as internal spur gears and splines within a range of 0" to 88" pitch diameter, regardless of shaper-cutter radius. This unique feature, combined with the machines 15" face-width capacity and 1.7DP cutting capability in steel, provide a formidable platform for producing a wide range of larger geared part members. Equipped with: * Machine Main Base With Work-table, Upper Column, Cutter Ram and Slide of "Super Robust" Construction * Machine with "Saddle Backoff" Method of Cutter Relieving * Cutter Spindle 6.25" diameter w/Standard Straight Spur Guide * Cutter Positioning via Stroke Jog-Button * Rapid Rotation of Work Spindle for Trueing Work-Piece * Rapid Saddle Traverse for Traversing Saddle Relative to Work * Automatic Depth Feed Mechanism for One to Four Cuts, With 4 Speed Motor Providing Speed Change on Finishing Cut * Assorted Work and Feed Change Gears * Assorted Stroke Change Gears * 2" Riser Plate * Main Drive Motor 15HP, 650/220 rpm, 240 Volt 60Hz w/Westinghouse Rectifier Unit for AC * Power Forced Lubrication to Working Elements with "Lubriquip Lub Controller" * Coolant Tank, Pump, and Piping, With Chip Pan * Full Complement of Electrics * Assorted Guards, Covers * 84" T-Slotted Table * Hydraulic System * Work Lamp * Work Platform * Cutter Adaptor * Manuals Specifications: Max. Diameter External Gear Cut (Nominal): 70" Max. Diameter Internal Gear Cut (Nominal): 88" Max. Diameter Workpiece Accommodated: 104" Worktable Diameter: 84" Max. Permissible Weight of Workpiece & Fixture: 36,000 Lbs. Max. Distance Workspindle Centerline to Centerline of Cutter Spindle: 35" Nwjdpsrtrxisfx Aazel Min. Distance Workspindle Centerline to Centerline of Cutter Spindle: 0" Max. Work & Fixture Clearance Height w/Cutter Spindle in Upper Position: 28" Max. Diametral Pitch (full length teeth): 2 DP Max. Diametral Pitch (stub teeth): .75 DP Max. Diameter Pitch (30P.A. splines): 2-5/5 DP Diameter of Cutter Spindle: 6.25" Max. Stroke Length: 19.118" Max. Face-Width (nominal): 15" Stroking Speeds (infinitely variable): 5 to 122 S.P.M. Max. Infeed of Cutter Ram: .0020 inch/min. Min. Infeed of Cutter Ram: .0005 inch/min. Max. Rotary Feed Per Stroke (per 1" of cutter diameter): .0068"/Min. Min. Rotary Feed Per Stroke (per 1" of cutter diameter): .0006"/Min. Approximate Machine Dimensions: 192"L x 144"W x 150"H Approximate Machine Weight: 95,000 Lbs.

Condition: good (used), Year of construction: 1993, Equipped with: 9" Cutter Head Power Stocks Crowning Auto Loader Heidenhein Scales Variable Feed/Speed Cutter Head RS232 Serial Port Trabon Lube Coolant W/Magnetic Chip Separator AC Servo Motors Full Splash Guards Stack Light Manuals Specifications: Work Gear Pitch Diameter 9" & 12" Cutter Head: 1-12", 1-8" Work Gear Max. O.D. 9" & 12" Cutter Head: 12 1/2", 8 1/2" Diameter Pitch Range: 4-20 Distance Between Centers: 23" Cutter RPM 9" & 12" Cutter Head" 50-500, 50-400 Max. Table Travel Conventional, Tangential, Diagonal: 5", 2" 5"-2" Diagonal Traverse Angle Straight Shaving: 0 Deg. - 90 Deg. Traverse Angle Crown Shaving: 45 Deg. Max. Approx. Max. Table Angle Crowning: 5 Deg. Max. Table Angle Taper: 1 Deg 30' Max. Cutter Head Crossed Axes Angle Left & Right: 25 Deg. Table Cross Feed Inches Per Minute: .5-35 Njdpfxeruahwe Aazewl Table Up-Down Feed Inches Per Minute: .004-12.5 Table Up-Down Travel: 8 1/8" Approx. Weight: 9600 lbs

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 32006, input voltage: 480 V, The Sprinter for Gears with Short Face Widths up to 100 mm The 100S Gear Shaping Machine is ideally suited for small face widths, for shaping spur and helical gears, internal and external, and for crowned and tapered gears. With only 6 m2 the 100S is one of the most compact machines of its class. Equipped with: Siemens Sinumerik 840D SL Control Hydraulic System 180 Degree Load System HSK-63 Spindle Auto Stroke Adjustment Chip Conveyor Chip Basket Flexlink Automation Festo Pneumatics Rittal Panel Conditioners Chiller 480/3/60, 35 KvA Motor & Controls Specifications: Workpiece With External Gear: -Largest Module (Steel W/Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Diameter: 100 mm Workpiece With Internal Gear: -Largest Module (Steel With Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Swing Diameter: 150 mm -Maximum Internal Diameter: 100 mm Tool: -Locating Cone In The Cutter Spindle: HSK-D63 -Diameter Shaping Spindle: 85 mm -Maximum Stroke Length: 30 mm Machine Travel Distances: -Radial (X-Axis): 180 mm -Column Tilting (B-Axis): -1 - +11 Degrees Machine Workpiece Table: -External Diameter: 220 mm -Clamping Diameter: 160 mm -Bore: 63 mm Speeds: -Feed Rate X-Axis: 12,000 mm/min -Workpiece Table (C-Axis): 0-400 min-1 -Cutter (C2-Axis): 0-300 min-1 -Spindle Stroke (A-Axis): 500-3,000 min-1 Electrical Equipment: -Operating Voltage: 480V -Supply Voltage: 115V Nwjdpfortrvyox Aazjl -Control Voltage: 24V -Frequency: 60 Hz -Connected Load of Machine: 35 kVA -Cable Cross-Sectional Area: 35 mm2 -Protection: 80 A Machine Overall Dimensions (L x W x H): 3,380 x 3,950 x 3,015 mm Weight of Machine: 7,800 kg