Used Holzher 6310 Cut 110 for sale (18,875)

Condition: good (used), Year of construction: 2021, total width: 500 mm, total length: 800 mm, total height: 500 mm, overall weight: 65 kg, sheet thickness (max.): 40 mm, operating speed: 2,600 mm/s, Cutting machine CEVISA - CHP-12 MACH-ID 9406 Make: CEVISA Type: CHP-12 Year: 2021 Max. nominal thickness 40 mm Max. recommended thickness 20 mm Max. bevel length in several runs 18 mm Max. bevel length in single run 12 mm MIn. bevel inner diameter 100 mm Fpodpfx Adezcng Ascjh   X Bevel K Bevel V Bevel Y Bevel High average cutters lifespan around 1000 M Self feed Zero maintenace Min. Beveling angle: 22.5° Max. beveling angle: 45° Min. plate thickness: 4mm Maximum sheet thickness:40mm Power: 3 HPkW Feed rate: 2600mm/min. Length: 800mm Width: 500mm Height: 500mm Weight: 65kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2013, total width: 500 mm, total length: 800 mm, total height: 500 mm, overall weight: 65 kg, sheet thickness (max.): 40 mm, input voltage: 3,000 V, operating speed: 2,600 mm/s, Cutting machine CEVISA - CHP 12 MACH-ID 9404 Make: CEVISA Type: CHP 12 Year: 2013 Max. nominal thickness 40 mm Max. recommended thickness 20 mm Max. bevel length in several runs 18 mm Max. bevel length in single run 12 mm MIn. bevel inner diameter 100 mm   X Bevel K Bevel V Bevel Y Bevel High average cutters lifespan around 1000 M Fpodpfx Ajzcngcjdcoh Self feed Zero maintenace   Min. Beveling angle: 22.5° Max. beveling angle: 45° Min. plate thickness: 4mm Maximum sheet thickness:40mm Power: 3 HPkW Feed rate: 2600mm/min. Length: 800mm Width: 500mm Height: 500mm Weight: 65kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2006, operating hours: 14,808 h, total height: 2,850 mm, total length: 9,000 mm, total width: 2,450 mm, Colour: White Empty weight: 4.000 kg Price: On request - Machine available from: 2026-07-10 - Year: 2006 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: AA1/015406 - Operating hours: 14808 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Min. spindle speed [rpm]: 600 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - - C-axis present: Yes - Type milling table: Beam table - Tool clamping system: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes Fjdpsx Hfikefx Adcjph - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Tool changer positions [pcs.]: 16 - System/software: Xilog plus - Safety feature: Safety mat - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 250 - CNC options: Offcut conveyor, Manual control - CNC documentation available: User keys/licenses - Table length [mm]: 3050 - Table width [mm]: 13 - Working range X [mm]: 3110 - Working range Y [mm]: 1300 - Z-axis working range [mm]: 200 - X-axis maximum stroke [mm]: 3500 - Y-axis maximum stroke [mm]: 1815 - Z-axis maximum stroke [mm]: 440 - Installed length [mm]: 4600 - Installed width [mm]: 6500 - Installed height [mm]: 3400 - Transport dimensions: 9000mm x 2450mm x 2850mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting attachment, quick-change thread cutting chuck, quick-change thread chuck -Manufacturer: Holex, Thread cutting chuck, quick-change thread chuck, 7 pieces -Type: 335620-10 -Size: M5 to M20, see photos -Submission/Price: complete Fpodpfxjzcu Sro Adceh -Transport dimensions: 330/120/H70 mm -Weight: 4.4 kg

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 7411231, Size 92 cm, Program, Spare knife, big side tables Machine no: 7411231 Fodpfx Aewnqwcedcsph

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Horizontal thin-cutting band saw 300 mm working width, tillable 12 degrees New 2025 model with bigger wheels and inverters on wheels. 80 mm blade width Touchscreen Schneider, PLC and Inverters Schneider Germany 22.0 KW saw motor Bigger wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm * same as new * Fpsdpfxozbi I So Adceh

Condition: good (used), Year of construction: 1991, Used press brake from Safan Type CNCS 110 4300 Fpodpfjza T Dbjx Adcoh Capacity 4300 x 110 tons Control system updated, ESA CNC control Y1, Y2 and X axes CNC controlled Equipped with a flat-bedding system / bending / hemming function Includes a set of tools

Condition: used, In this offer you purchase a used cutting system "Fotoba FHS42 PW" Object of sale: Fpedsqmm D Sopfx Adcoh 1 x Fotoba FHS42 PW suitable for: HP Pagewide Pro XL 10000 HP Pagewide XL 8000 Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Fpsdpfxou Tg Spo Adcoh Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, year of last overhaul: 2025, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. Fpodpfx Aevf E Avsdceh General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: ready for operation (used), Indramat MAC 090C-0-KD-2-C/110-A-0/S001 permanent magnet three-phase servo motor, serial no. as per photo, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos,The agreed sales discounts do not apply to this item. Please ask for price separately! Fpjdpfx Adoi D Ihuecsh

Condition: ready for operation (used), Indramat MAC090C-1-GD-1-B/110-A-2/-I01250/SO13 motor SN: MAC090-42934 - Tacho constant 3.0 V / 1000 min-1 / brake 14 Nm DC 24 V, used, good condition, 100% functional, delivery as per photos. Fsdpfx Adextv U Usceph

Condition: ready for operation (used), Indramat MAC090C-0-KD-3-C/110-B-1/S001 permanent magnet motor , serial no. according to photo , hole spacing of mounting holes: 116 x 116 mm, Ø drive shaft: 24 mm ,used, strong traces of use, 100% functional, scope of delivery according to photos Fpedsi D Imnjpfx Adcsh

Condition: ready for operation (used), Indramat MAC093A-0-PS-4-C/110-A-0/WI560LV Permanent magnet three-phase servo motor SN:19865,used, normal signs of wear, 100% functional, scope of delivery as per photos Fodpfxsumfv Ie Adceph

Condition: ready for operation (used), Indramat MAC093B-0-GS-4-C/110-B-0/WI522LV Permanent Magnet Motor SN:MAC093-32704 + Stegmann DG 1604 2500 PULS / REV encoder SN:330003657, used, normal signs of use, 100% functional, scope of delivery as per photos Fjdpfx Aei D In Tedcoph

Condition: ready for operation (used), Stöber Antriebstechnik P521SPD0100ME 110/130/24 gearbox SN: 1770700, used, in good condition, 100% functional, scope of delivery as per photos. Fpedsy Srqxjpfx Adcjh

Condition: ready for operation (used), Stöber Antriebstechnik P521SPD0100ME 110/130/24 gearbox SN: 1770704, used, in good condition, 100% fully operational, scope of delivery as per photos. Fpedpfx Asy Srriedcsh

Condition: ready for operation (used), Heidenhain RCN 226 16384 03S17-7V K4 .533 110-01 rotary encoder, serial number: 26456896A, professionally fully overhauled and tested with 6 months warranty, 100% functional, scope of delivery as per photos. Fsdoy Nql Njpfx Adcoph

Condition: new, Indramat MAC 090A-0-ZD-2-C / 110-A-0 / S005 SN:75121 ,unused, 100% functional, scope of delivery according to photos Fjdpfx Aei D Ihijdcoph

Condition: ready for operation (used), Indramat MAC 090A-0-ZD-4C/110-B-1/WI522LV Permanent Magnet Motor, serial no. as per photo, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos,The agreed sales discounts do not apply to this item. Price please ask separately! Fsdpfx Aji D Ihqedceph

Condition: ready for operation (used), Indramat MAC 090C-0-GD-4-C/110-A-1/WI578LV/S001 three-phase AC servomotor, serial number: 68558, used, in good condition, 100% functional, scope of supply as shown in the photos. Fpodpfx Adoy T Uncecsh

Condition: ready for operation (used), Rexroth MAC090C-0-KD-2-C/110-A-0 3-phase permanent magnet motor MNR: R911223273 SN:MAC090-93905, used, normal signs of use, 100% functional, scope of delivery as per photos Fpsdetz Idkspfx Adcoh

Condition: ready for operation (used), Rexroth MAC090C-0-KD-2-C/110-A-1 3-phase permanent magnet motor MNR: R911223272 SN:MAC090-93908, used, normal signs of use, 100% functional, scope of delivery as per photos Fpjdpfx Ajtz Idqjdcoh

Condition: ready for operation (used), Indramat MAC090A-0-ZD-1-B/110-A-0/-I01250 Permanent Magnet Motor SN MAC090-11754, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Fsdpfxslntwis Adcjph

Condition: ready for operation (used), Indramat MAC090B-0-JD-2-C / 110-A-1 Permanent Magnet Motor, Serial No.: MAC090-80045, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fpodpfxsy T Unpj Adcjh