Used Horizontal Cardboard Baler for sale (7,434)

Condition: used, Year of construction: 2014, operating hours: 11,517 h, Empty weight: 6.000 kg - Year: 2014 - Documentation available: No - CE certificate present: No - Serial number: 070614/B/1-407 - Operating hours: 11517 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - C-axis present: Yes - Type milling table: Flat table - Drilling unit present: Yes Duedpfxsx E Uk Ue Apwjt - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 18 - Tool changer positions [pcs.]: 12 - Vacuum pump present: Yes - └ Number [pcs.]: 2 - └ Brand: Becker - └ Year of manufacture: 2023 - └ Main motor power [kW]: 18.5 - └ Capacity [m³/h]: 600 - └ Vacuum pressure [bar]: 250 - Working range X [mm]: 7220 - Working range Y [mm]: 1580 - Z-axis working range [mm]: 180 - Transport weight [kg]: 6000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2018, total height: 2,300 mm, total length: 3,870 mm, total width: 1,900 mm, Empty weight: 2.500 kg - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: AH/121500 - Number of milling spindles [pcs.]: 12 - Type milling table: Flat table - Drilling unit present: Yes - Saw unit present: Yes - Tool changer positions [pcs.]: 8 - Tools included: Yes - Table length [mm]: 2570 - Table width [mm]: 1290 - Working range X [mm]: 2486 - Working range Y [mm]: 1255 - Z-axis working range [mm]: 150 - X-axis maximum stroke [mm]: 3120 - Y-axis maximum stroke [mm]: 1685 - Z-axis maximum stroke [mm]: 250 - Transport dimensions: 3870mm x 1900mm x 2300mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information Dsdpfx Apjxrdngewsut VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2018, operating hours: 10,347 h, total height: 2,400 mm, total length: 7,000 mm, total width: 2,400 mm, Colour: Grey Empty weight: 3.450 kg - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 10347 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 Duodsxtbgpspfx Apwet - Type milling table: Beam table - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 10 - └ Vertical drilling spindles [pcs.]: 24 - Saw unit present: Yes - Tool changer positions [pcs.]: 25 - System/software: Xilog plus - Safety feature: Bumper guard - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - CNC options: Barcode reader, Offcut conveyor - Working range X [mm]: 3110 - Working range Y [mm]: 1320 - Z-axis working range [mm]: 180 - Transport dimensions: 7000mm x 2400mm x 2400mm (l x w x h) - Transport weight [kg]: 3450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2012, total height: 2,400 mm, total length: 13,500 mm, total width: 2,450 mm, Empty weight: 2.500 kg Biesse Rover A1536 G FR Year 2012 Central lubrifaction FT work table, X 3765 Y 1560, 9 zones Dujdpfxewnip Dj Apwot 12 kW electro spindle, ISO 30, air cooled Biesse WORKS Biesse NEST MODULE Air conditioner 16 pos. revolver magazine Work area XYZ 3765*1585*170 2x vacu pump 250 m³ C axis 360° BH 17 L drilling group Including loading and unloading system - Year: 2012 - Documentation available: Yes - └ Type Documentation: User manual, Electrical diagrams - └ Type: Hardcopy - CE marking present: Yes - CE certificate present: No - Serial number: 81399 - Type milling table: Flat table - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 7 - Saw unit present: Yes - Tool changer positions [pcs.]: 16 - Vacuum pump present: Yes - └ Number [pcs.]: 2 - └ Brand: Becker - └ Capacity [m³/h]: 250 - Working range X [mm]: 3765 - Working range Y [mm]: 1585 - Z-axis working range [mm]: 170 - Transport dimensions: 13500mm x 2450mm x 2400mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2014, total height: 2,400 mm, total length: 4,500 mm, total width: 2,200 mm, Empty weight: 2.500 kg CNC Machining Center Biesse skill 12 24 G FT Year of construction 2014 Machine no. 60961 Recording HSK F63 10x vertical drilling 12 switch positions Software: BiesseWorks X axis 2465 mm Y-axis 1260 mm Z axis 324 mm Disassembled for transport on normal trailer; 4500x2200x2400mm; Duodpfx Aswnhanepwst Own weight 2000kg - Details: - └ Description: Pallet with white control box does not belong to this machine - Year: 2014 - Documentation available: Yes - CE certificate present: No - Serial number: 60961 - Number of milling spindles [pcs.]: 1 - Type milling table: Flat table - Drilling unit present: Yes - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 12 - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - Working range X [mm]: 2465 - Working range Y [mm]: 1260 - Z-axis working range [mm]: 324 - Transport dimensions: 4500mm x 2200mm x 2400mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 1999, total length: 3,350 mm, total width: 1,550 mm, total height: 1,800 mm, Colour: White Empty weight: 3.300 kg Price: On request In very good condition. In 2017 Refurbished for €32.000 - Year: 1999 - Documentation available: Yes - CE marking present: Yes Dujdpfx Apey Ivx Eowet - CE certificate present: No - Drive system: Teach-in - Control system brand: Monforts - Control system type: Monforts Control System MTC K - Power [kW]: 15.0 - Centre height [mm]: 250 - Swing over bed [mm]: 500 - Carriage turning diameter [mm]: 290 - Distance between centres [mm]: 1500 - Spindle bore [mm]: 70 - Min. spindle speed [rpm]: 2 - Max. spindle speed [rpm]: 2800 - Options: Fixed steady, Three-jaw chuck - Transport dimensions: 3350mm x 1550mm x 1800mm (l x w x h) - Transport weight [kg]: 3300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2007, total height: 2,500 mm, total length: 11,000 mm, total width: 2,400 mm, Colour: Grey Empty weight: 7.200 kg Price: On request - Machine available from: 2026-06-24 - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 97649 - Number of milling spindles [pcs.]: 2 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Min. spindle speed [rpm]: 1000 - - Max. spindle speed [rpm]: 20000 - - Main motor power [kW]: 9 - └ Milling spindle 2: - - Number of controlled axes [pcs.]: 3 - - Main motor power [kW]: 18.5 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: No - Tool changer positions [pcs.]: 22 - System/software: BiesseWorks - Safety feature: Safety mat - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: VTLF 250 - └ Year of manufacture: 2007 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 250 - Tools included: No - CNC options: EPS system, Offcut conveyor, Manual control - CNC documentation available: USB stick, User keys/licenses - Table length [mm]: 6200 - Table width [mm]: 1320 - Working range X [mm]: 6200 - Working range Y [mm]: 1535 - Z-axis working range [mm]: 275 - X-axis maximum stroke [mm]: 6820 - Y-axis maximum stroke [mm]: 1963 - Transport dimensions: 11000mm x 2400mm x 2500mm (l x w x h) Dedjy Ipntjpfx Apwjut - Transport weight [kg]: 7200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 1959, total length: 3,500 mm, total width: 1,200 mm, total height: 1,500 mm, Colour: Green Empty weight: 2.000 kg - Year: 1959 - Documentation available: No - CE certificate present: No - Serial number: 37 - Drive system: Conventional - Centre height [mm]: 270 - Swing over bed [mm]: 540 - Carriage turning diameter [mm]: 360 - Distance between centres [mm]: 1500 - Bed width [mm]: 450 - Spindle bore [mm]: 62 - Min. spindle speed [rpm]: 14 Dsdpfxey Idtwe Apweut - Max. spindle speed [rpm]: 710 - Options: Fixed steady, Three-jaw chuck - Transport dimensions: 3500mm x 1200mm x 1500mm (l x w x h) - Transport weight [kg]: 2000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2004, functionality: fully functional, Year of manufacture: 2004 Dusdpfx Asy I Dqcspwjt Control: Fanuc Travel distances: 760/760/800 Without tools

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Duedpfx Aju Tha Ispwot Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2007 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The PZA cardboard shredder was in use in a Dutch logistics centre to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 1 piece Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredder was an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machine is in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Duodpfx Aou Thhropwet Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Djdpfex A U Ncox Apwjut Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Technical details grinding length 600 mm grinding width 400 mm workpiece height 400 mm Duedpfxey Idnuo Apwst total power requirement 23 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 3592 x 3519 x 2203 mm Additional information Horizontal surface grinder in almost new condition Operating hours: CNC on: 1198 hours Machine on: 1117 hours Automatic operation: 509 hours Grinding operation: 228 hours Okamoto Touch Screen Control Travel X-axis: 600 mm Travel Y-axis: 22.5 – 497 mm Travel Z-axis: 400 mm Grinding wheel dimension 355 x 38 x 127 mm Speed range rpm: 1-2800 (stepless) Rapid traverse mm/min: 4000 Main drive kW: 7.5 Maximum table load in kg: 1000 Accessories: - Electro-permanent magnetic clamping plate: 400 x 600 P13 mm, height 80 mm (make Wagner) - 2 grinding wheel flanges (without grinding wheel) - Table dresser - Automatic straight dresser, spindle box mounted - Automatic compensation of the wheel dressing amount - Automatic central lubrication - Ball screw in the Y and Z axes with AC servo motor and measuring system - Coolant system with belt filter system

Condition: used, Year of construction: 2014, Technical details: x-travel: 760 mm y-travel: 760 mm z-travel: 760 mm total power requirement: 43 kW weight of the machine ca.: 11,5 t Dujdpfx Asxrwpdopwet dimensions of the machine ca.: 2,7 x 4,73 x 2,87 m max. table loading capacity: 500 kg

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Dedou Dahnepfx Apwjut Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: used, Year of construction: 2005, cutting diameter 230 mm cutting speed 35 - 70 m/min cutting width 260 x 200 mm saw band length 2720 x 27 x 0,9 mm total power requirement 1,1 kW weight of the machine ca. 0,68 t Djdpfxsy N D Nbe Apwout dimensions of the machine ca. 1,8 x 1,8 x 1,6 m

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 150, Used Okuma MA-600HB Horizontal Machining Center Year: 2008 Spindle cooling Max. 6000 rpm Z- 810 mm X- 1000 mm Y- 900 mm Tool magazine for 150 tools Djdpfx Apsyrf I Ajwsut 1 spindle 4 axes 10-pallet system We have 2 units available. Price is per unit, ex location.

Condition: good (used), Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, Used Okuma MA-600 HB horizontal machining center, year 2008, including turncut function, spindle cooling, 6000 rpm. Travels: Z-810 mm, X-1000 mm, Y-900 mm. Tool magazine for 150 tools, 1 spindle, 4 axes, 6-pallet changer function. Duedpfx Apeywicvowot

Condition: excellent (used), Year of construction: 2006, Heller MCH 250 4 axes Year of manufacture: 2006 Control: Siemens 840 D Dodpfx Apey Nyckeweut Spindle speed: 12,500 rpm Travel distances: X: 800 mm Y: 800 mm Z: 800 mm Pallet size: 630 x 630 mm Max. tool length: 600 mm

Condition: excellent (used), Year of construction: 2006, Heller MCH 280 C 5 axes Year of manufacture: 2006 Dedpfxsy Nybgo Apweut Control: Siemens 840 D Spindle speed: 8000 rpm Travel paths X: 1000 mm Y: 1200 mm Z: 1100 mm Pallet size: 630 x 630 mm Rotary table: 360,000° x 0.001° Tool magazine positions: 400 Interface: HSK 100

Year of construction: 2007, condition: good (used), For Sale: Dujdoy Egyzspfx Apwst Neat Ibonhart horizontal bag loader Brand: Ibonhart Model: APH6 Year: 2007 - With automatic bag table system - Infeed and outfeed conveyors included - Adjustable distances set mechanically - Robust and reliable machine - Manual and documentation present - Central oil lubrication Maximum product dimensions: Length: 50 cm Width: 20 cm Height: 14 cm Capacity: 50 pieces per minute Machine inspection on location is possible. Price: €19,000 EXW Includes proper loading and packaging. Transport negotiable Subject to type and typographical errors.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Horizontal thin-cutting band saw 300 mm working width, tillable 12 degrees New 2025 model with bigger wheels and inverters on wheels. 80 mm blade width Touchscreen Schneider, PLC and Inverters Schneider Germany 22.0 KW saw motor Djdpfjy Dpl Djx Apwjut Bigger wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm * same as new *

Condition: excellent (used), Year of construction: 2020, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 2003031, type of input current: AC, total length: 1,670 mm, total height: 1,550 mm, total width: 1,070 mm, input voltage: 220 V, overall weight: 450 kg, film width: 370 mm, Pillow Flow Wrapping Machine – Model KFD323 (2020) High-quality pillow flow wrapping machine in good working condition, fully operational and ready for immediate use in production. Key Specifications: Model: KFD323 Year of Manufacture: 2020 Power Supply: 220 VAC Packing Speed: 15–30 bags per minute (depending on product and film) Film Width Range: 80–370 mm Features & Benefits: Suitable for a wide range of products including food, bakery items, and general goods Consistent and reliable sealing performance Dujdpey Edglofx Apwet Adjustable settings for speed and film width to suit different packaging needs Compact and efficient design for easy integration into existing production lines The machine has been well maintained and is ideal for businesses looking for a cost-effective packaging solution without compromising on performance. 📩 Videos, additional photos, and inspection/viewing can be arranged upon reques

Year of construction: 1990, condition: good (used), Make: Fuji Type: automatic packaging machine Model: FW-3400 Year of construction: 1990 Frame: steel, lacquered Dimensions: L x W x H = 4.500 x 1.100 x 1.600 mm Duodsfx Sqgjpfx Apwst Product width: max 140 mm Product height: max. 60 mm Product length: 80 - 350 mm (range cut length) Capacity: 20 - 300 packages / minute Other: foil width up to 430mm separate mobile transformer cabinet digital display with controls English documentation as-is or adjusted to customer needs

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details grinding length 600 mm grinding width 400 mm workpiece height 375 mm Additional information CNC Precision Surface and Profile Grinding Machine Grinding area: 600 x 400 x 375 mm Grinding spindle motor: 3.7 kW Table drive: hydraulic Cross-axis drive: electromechanical Grinding wheel: 300 x 50 x 76.2 mm Peripheral speed: 10 - 32 m/s Electromagnetic plate: 600 x 400 mm with holding force control and automatic magnetic pole reversal for demagnetizing Dodpsy Ew N Hofx Apwsut Features: Partially enclosed, open-topped loading compartment with a sliding door Cleaning kit for cleaning the work area with hand-held impulse nozzle Holder for prism arm with single-point diamond, MK 0 Grinding spindle speed control with V-constant controller Universal paper filter unit UPF 100, tank capacity approx. 280 liters Coolant pump: 20 liters/minute at 1.5 bar With mud box Machine light Grinding wheel flanges