Used Hydraulic Gantry Press for sale (26,848)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, stroke length: 500 mm, table width: 800 mm, table length: 800 mm, Equipment: documentation/manual, HURSAN 300 tons hydraulic press Year of manufacturing 2021 Table 800x800 mm Ibodpfxoy Szqnj Afhsb Stroke 500 mm

Condition: ready for operation (used), functionality: fully functional, table width: 1,800 mm, table length: 2,700 mm, Complete hydraulic press in good working condition, with 12 plates with dimensions of 2700/1800 mm Ibsdpfx Asxzgplsfhjb

Condition: good (used), Year of construction: 1983, Offer 26245 Technical data: - max. pressing force 100 t - max. ram stroke approx. 500 mm - stroke speed 25 mm/s - return speed 125 mm/min - installation height approx. 800 mm - overhang to the center of the ram 380 mm - ram clamping surface 530 x 400 mm - ram clamping pin 40 mm - table size 750 x 560 mm Iedpfoz A Az Rjx Afhsbb - table bore / through hole in the table 200 mm - table height above floor 720 mm - oil filling volume approx. 200 l - drive 400 V / 11 kW - space requirement approx. W 1150 x H 2980 x D 1850 mm - weight approx. 4600 kg

Condition: good (used), Year of construction: 1989, machine/vehicle number: 4113, functionality: fully functional, operating hours: 4,109 h, overall weight: 6,600 kg, Hydraulic press brake Manufacturer: DoneWell, Hahn & Kolb Stuttgart Type: 80 - 2500 Year of manufacture: 1989 Control system: Cybelec Model Eva Pac Max. working width: 2500 mm Max. clamping force: 100 t Back gauge: 750 mm with 2 stop fingers Condition: good Die: Multi V 7 angle Ibjdpfxozyanlj Afheb Tools

Condition: repair required (used), Year of construction: 1972, machine/vehicle number: 611, functionality: limited functionality, pressing force: 100 t, For sale is a Hans Schön hydraulic press with 100 ton capacity. It was last used approximately 7 years ago. At that time, the machine had an issue with a hydraulic valve, which was not repaired since the press was no longer needed. Otherwise, the machine ran flawlessly until then. The press does not have UVV (accident prevention certification)! Ibjdjx Ehlcspfx Afhob

Condition: ready for operation (used), Year of construction: 1998, power: 37 kW (50.31 HP), pressing force: 250 t, stroke length: 150 mm, table width: 900 mm, table length: 1,000 mm, overall weight: 16,000 kg, Very nice and well maintained hydraulic press. 250 tons pressing force. Approximate dimensions: H: 380 cm. W: 200 cm. L: 200 cm. Weight: 16,000 kg. Can be loaded by crane on collection against payment. Transportation can be arranged. Sold for customers. Ibedpfxsry Trpo Afhsb Location: DK-7600 Struer. Make an appointment for a demonstration.

Condition: good (used), Storage location: 3125 Manufacturer: WMW Zeulenroda Machine number: 052/04/16 Type / Model: PYE10SS Pressing force: 10 t Table area: 500 x 400 mm Ram plate: 360 x 275 mm Overhang: 255 mm Through-hole: 140 mm Max. distance between table and ram: 650 mm Ijdjzl Dnaspfx Afhjbb Stroke: 400 mm Downward speed: 200 mm/s Upward speed: 450 mm/s Connection: 4.5 kW Accessories / Equipment: Condition: good Weight: 1.5 t Dimensions: 900 x 1,400 x 2,400 mm

Condition: new, pressure 20 t stroke 180 mm daylight between the columns 540 x 100 mm dayligth max. 990 mm 72 mm diameter of piston 48 mm weight of the machine ca. 0,12 t dimensions of the machine ca. 0,8 x 0,7 x 1,8 m Our frame presses are officially CE certified according to the latest rules. Almost all presses offered in this area are not CE certified. - with manual hydraulics - Move the cylinder sideways - Pressure gauge - 2 press documents Ijdsupxc Tjpfx Afhebb

Condition: new, pressure 10 t stroke 180 mm daylight between the columns 335 x 115 mm Ibsdpfx Aoupxc Hjfhsb dayligth max. 340 mm 56 mm diameter of piston 40 mm weight of the machine ca. 0,05 t dimensions of the machine ca. 0,75 x 0,53 x 1,6 m Our frame presses are officially CE certified according to the latest rules. Almost all presses offered in this area are not CE certified. - with manual hydraulics - Move the cylinder sideways - Pressure gauge - 2 press documents

Condition: refurbished (used), Year of construction: 2018, machine/vehicle number: DF0150, pressing force: 63 t, pressure:63 t passage width:700 mm stroke:500 mm Approx. weight (w/o operational materials):5,1 t Measurements L x W x H:ca. 1500 x1600 x 2995 mm Return Capacity:6 t Engine Output:11 kW Iedpfsfhcc Uex Afhobb Max Working height:700 mm Approaching Speed max. :140 mm/sec Pressure Speed:15 mm/sec. Travel:500 mm Ram plate:600 x 540 mm Table size:750 x 600 mm Table height above ground level:850 mm Oil Tank Capacity:150 l Control voltage:24 V Frequency:50 Hz Siemens Control System:S7 1200 Monitor:Siemens 12 Zoll Special feature: When operating at 260bar the machine reaches a pressure level of 70 tons.

Condition: used, Year of construction: 1992, functionality: fully functional, pressing force: 250 t, stroke length: 400 mm, table width: 1,250 mm, table length: 1,150 mm, die cushion stroke: 150 mm, installation height: 700 mm, Hydraulic double column press DUNKES HDS 250/10 Year of construction 1992 Technical data: Pressing force at 260 bar: 250 tons Rapid lowering speed: 365 mm/s Table clamping area approx.: 1150 x 1250 mm Ram clamping area approx.: 1150 x 1250 mm Die cushion area approx.: 800 x 1000 mm Die cushion pressing force (200 bar): 100t Die cushion stroke: 150mm Power requirement: 45 kw Isdpfx Afoup Si Hshebb Installation height: 700 mm ram stroke: 400 mm Conversion of the control system to SIEMENS (in 2005) Machine height approx. 5,400 mm TP language currently Polish

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 290/02, functionality: fully functional, Ulrich Schöwerling Delta Z50 de luxe – Hydraulic Baling / Press Machine The Delta Z50 de luxe, manufactured by Ulrich Schöwerling Maschinenbau, is a heavy-duty vertical hydraulic baling and pressing machine designed for efficient compaction of various industrial and waste materials. Thanks to its solid construction, powerful hydraulic system and simple operation, it is well suited for warehouses, production facilities and recycling plants. The machine operates via an electric motor-driven hydraulic unit. The press platen moves vertically from top to bottom, ensuring effective compression. The design allows for bale tying, making the finished bales easy to handle and transport. ⚙️ TECHNICAL PARAMETERS • Manufacturer: Ulrich Schöwerling Maschinenbau (Germany) • Model: Delta Z50 de luxe • Machine No.: 290/02 • Machine type: Vertical hydraulic baler / press • Power supply: 400 V Iedpfx Afsyghhhjhsbb • Frequency: 50 Hz • Current consumption: 16 A • Motor power: 8 kW • Machine weight: approx. 850 kg • Certification: CE compliant Typical applications: paper, cardboard, plastic film, textiles and other compressible industrial materials

Condition: refurbished (used), Year of construction: 2019, machine/vehicle number: DF0195 - Rev.00, pressing force: 40 t, pressure:40 t passage width:850 mm stroke:500 mm Weight of machine approx.:ca. 3,8 t dimensions:ca.1300 x 1800 x 3200 mm return capacity:4 t pestle plate:600 x 450 mm table plate:750 x 720 mm table height over floor:850 mm Oil cooling (electric):1,5 kW (max) max. working heidht:700 mm motor capacity:12,7 kW Approaching Speed max. :140 mm/sec pressure speed:15 mm/sec Ibsdpfx Aefhcc Hofhjb Return Speed:140 mm/sec Oil Tank Capacity:160 l Monitor:WEG - 10 Zoll Siemens Control System:S7 1200

Condition: used, functionality: unexamined, Press with hydraulic unit for sale Ijdsw Izrispfx Afhsbb

Condition: used, Single-column hydraulic press, straightening press, punching tool – ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine No. 317 / 690 Year of manufacture approx. 1986 Pressing force 150 tons Stroke 125 mm Ram stroke 35 mm Table size 280 x 210 mm Ram surface Ø 125 mm Ibjdpfed Swtaex Afheb Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Ram surface with 4 threaded holes M16 and 20 mm guide groove, with a centering bore Ø 15 mm in the center - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Good condition

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Ibsdoy Uiyvopfx Afheb Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: used, Year of construction: 1987, machine/vehicle number: 10064, functionality: fully functional, operating hours: 90,041 h, input voltage: 380 V, type of input current: three-phase, pressing force: 200 t, stroke length: 300 mm, table width: 800 mm, table length: 1,290 mm, table height: 1,000 mm, ram plate width: 800 mm, ram plate length: 1,300 mm, oil tank capacity: 1,300 l, total length: 2,330 mm, total width: 1,600 mm, total height: 4,150 mm, overall weight: 21,000 kg, control cabinet height: 2,070 mm, control cabinet length: 1,500 mm, control cabinet width: 400 mm, DGUV certified until: 06/2026, die cushion stroke: 70 mm, distance between side stands: 420 mm, installation height: 600 mm, Equipment: safety light barrier, 1x tool safety input Two-hand control panel with emergency stop 8x hydraulic clamps Isdpfx Aoyvgrhjfhsbb Electrically adjustable depth stop Cut stroke damping Ejector - draw cushion for ram and press table Electronic stroke and pressure measurement system Hydraulic main drive pump completely overhauled with a new drive motor

Year of construction: 2026, condition: new, functionality: fully functional, The new KORPLEG PS range: • Multi-axis press brakes (X, Y1, Y2, R, Z) for greater precision and productivity • A robust and durable mechanical design • Very quick and easy operation • Ultra-comprehensive standard equipment • An affordable budget with no hidden costs or surprises Machine equipped with an ESA 630 CNC control system with a 10" graphic display, controlling the 4 axes X, Y1, Y2 and R, plus two external axes, for controlling the machine pressure and the crowning table. • High-precision digital rules for bending (Y1, Y2 axes, controlled by CNC). • CNC-controlled bending pressure regulation • Hydraulic crowning table with CNC-controlled pressure • A complete set of punches, 135 mm height, standard (deer foot), straight or gooseneck (to be specified) • A multi-V die with chain-driven reversal or single-V dies (to be specified) • Quick-release clamps for punches with a push button for quick removal of segmented tools • 2 front part support arms, mounted on linear guides for easy movement Machine equipped with an ESA 630 CNC control system with a 10" graphic display, controlling the 4 axes X, Y1, Y2 and R, plus two external axes, for controlling the machine pressure and the crowning table. THE MECHANICS AND HYDRAULICS DEDICATED TO BENDING • High-precision digital rules for bending (Y1, Y2 axes, controlled by CNC). • CNC-controlled bending pressure regulation • Hydraulic crowning table with CNC-controlled pressure • A complete set of punches, 135 mm height, standard (deer foot), straight or gooseneck (to be specified) • A multi-V die with chain-driven reversal or single-V dies (to be specified) • Quick-release clamps for punches with a push button for quick removal of segmented tools Ibodpfx Afezcyx Dohsb • 2 front part support arms, mounted on linear guides for easy movement THE REAR MECHANISM: BENDING STOP ASSEMBLY • Rear stop (X-axis), driven by a servomotor and mounted on high-precision (0.05 mm) ball screw linear guides • Height-adjustable rear stop (R-axis), driven by a servomotor and controlled by the CNC. • 4 retractable bending stops that can be moved transversely (Z-axes): 2 manually and 2 with a joystick (Option Z1, Z2 digitized with CNC 640 or 650) OPTIMIZED OPERATOR SAFETY WHILE MAINTAINING GOOD ERGONOMICS: • Side guards with safety barriers and a Class 4 safety module • Rear protection with safety barriers • Assembly with 2 up/down pedals and an emergency stop. • All emergency stops and barriers are connected to a safety module that must be reset in the event of a stop. NUMERICAL CONTROL WITH TOUCH SCREEN: Thanks to the graphics and touch screen, programming and operating a press brake has never been so simple and intuitive. • Making a complex part becomes straightforward • Making simple parts becomes accessible to everyone

Condition: good (used), Year of construction: 1981, machine/vehicle number: 027-006-20, Offer 26244 Technical data: Iedpfx Aoz A Axvefhobb - Max. pressing force 63 t - Max. ram stroke 500 mm - Stroke speed 200 mm/sec - Return speed 400 m/min - Installation height 800 mm - Overhang to center of ram 360 mm - Ram clamping surface 530 x 460 mm - Ram clamping pin 40 mm - Table size 750 x 560 mm - Table bore / through hole 180 mm - Table height above floor 700 mm - Oil capacity (approx.) 300 l - Drive 380 V / 11 kW - Space requirement (approx.) W 1150 x H 3100 x D 1750 mm - Weight (approx.) 4300 kg

Condition: used, Year of construction: 2013, pressing force: 500 t, total length: 6,000 mm, total width: 3,000 mm, total height: 5,000 mm, overall weight: 200,000 kg, Press force: 16,000 kN Max. ram stroke: 1,700 mm Max. opening between table and ram: approx. 2,450 mm Min. opening: 770 mm Ram plate: 4,500 × 2,500 mm Table size: 4,500 × 2,500 mm Rapid traverse: 350 mm/s Working speed at 66% press force: 23 mm/s Working speed at 100% press force: 13 mm/s Max. return speed: 220 mm/s Max. retraction force: 1,600 kN Ram cushion: Force: 2,000 kN Stroke: 150 mm Pressure plate: 3,650 × 1,580 mm Table cushion: Force: 2 × 1,000 kN or 3 × 500 kN Ibedpfx Aezyd Hlefhob Stroke: 300 mm Pressure plate: 1,550 × 700 mm Drive: Main motors: 2 × 132 kW Motor filter unit: 4 kW Motor speed: 1,500 rpm Suitable for demanding forming, deep drawing, and pressing operations with large tools and high press forces. Pressing force max.: 500 t Dimensions (LxWxH) approx.: 6000 x 3000 x 5000 mm Weight approx.: 200,000 kg Year of construction: 2,013 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 300 t, stroke length: 400 mm, table width: 600 mm, table length: 600 mm, Equipment: documentation/manual, OZKOC 300 tons hydraulic press monoblock frame New in 2025, almost new Table 600x600 mm Ibjdey Szm Nspfx Afhsb Stroke 400 mm

Year of construction: 2002, condition: good (used), Used Rhodes 60ton hydraulic press for sale Four pillar hydraulic press for sale. Year/new: 2002 Nominal force: 63 tonnes Design pressure: 200 bar Maximum stroke: 250 mm Approach speed: 150 mm/s Pressing speed: 15 mm/s Return speed: 150 mm/s Maximum tool size: 800 mm x 800 mm Maximum top tool mass: 750 kg Mass of press: 7000 kg Number of lifting points: 4 Ibodpfx Afen Tnv Esheb Electrical supply 400-3-50 Pneumatic supply 5.5 bar Worson Die Cushion Type DDC 104 In stock and available for immediate delivery. Can quote for new hydraulic c, d and h frame presses. Free standing hydraulic press complete with hydraulic cushion.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 3599, total height: 2,600 mm, total length: 2,200 mm, total width: 2,200 mm, overall weight: 16,300 kg, pressing force: 100 t, passage height: 1,200 mm, passage width: 1,200 mm, Hydraulic press (previously used for lamination of door panels) Pressing area: 1300x1100 mm Press cylinders: 4x D110 mm Maximum pressing force: 1000 kN Ijdpfowt Axcox Afhjbb The machine is currently disassembled and was fully operational until it was taken apart. For an additional charge, two compatible heating plates including control cabinet are also available.

Condition: used, Year of construction: 2011, functionality: fully functional, operating hours: 1,000 h, input voltage: 380 V, type of input current: three-phase, pressing force: 1,200 t, stroke length: 600 mm, table width: 3,000 mm, table length: 2,000 mm, table height: 700 mm, ram plate width: 800 mm, ram plate length: 600 mm, distance table to ram: 700 mm, oil tank capacity: 700 l, total length: 2,000 mm, total width: 3,000 mm, total height: 4,200 mm, overall weight: 60,000 kg, control cabinet height: 2,000 mm, control cabinet width: 400 mm, distance between stands: 2,200 mm, Equipment: safety light barrier, H-frame, 4 columns, daylight 700 mm, stroke 600 mm, distance between columns 2200 mm x 1260 mm, dimensions (LxWxH) 3000x2000x4200 mm, 380V-15kW, weight 60,000 kg Ibedjxn Rvcepfx Afhjb

Condition: good (used), Year of construction: 1990, Power: 1.000 kN Size of bolster: 800 x 750 mm Distance betw. columns: 900mm Size of ram: 800 x 600mm Daylight: max. 800 mm Stroke: 480 mm Speed: Fast down: 300 mm/s Working: 30 mm/s Fast up: 300 mm/s Electric power total: app. 31 kW Weight: app. 13.000 kg Size of footprint: app. 1,6 x 2,90 x 3,8m (T x B x H) • die cushion, activ, 400kN, stroke 200mm • allowed for 2-hand working Ibedpfxez Atv Ij Afhob • equipped by oil - air chiller • ram guiding by 4 pc. hard chromed Guiding columns