Used Ide Single Screw Coextruder for sale (17,093)

Year of construction: 2024, operating hours: 2 h, condition: new, functionality: fully functional, For sale is an as-new spiral cooling tower made of stainless steel 304. As a precautionary measure, the basket was completely shot-blasted, and every single stainless steel component was pickled and then hand-polished. All screws and nuts have been replaced with new ones, all shafts have been replaced with stainless steel, and all ball bearings have also been replaced with stainless steel deep groove ball bearings. Replacement motors (drive for the basket and for the modular belt), as well as approximately 20 meters of modular belt, are included as spares. Laedpeyvrvpofx Anxog Total modular belt width: approx. 340 mm, blue area width approx. 280 mm, outer side areas on the right and left made of stainless steel. Total belt length: 100 m. Number of tiers: 9. Spacing between each tier: 105 mm. Overall tower height: 2060 mm. Overall length incl. discharge belt: approx. 4000 mm; discharge section: approx. 2000 mm; total width: 2235 mm; running surface inner width: 370 mm; running surface outer width: 465 mm. Modular belt is made of stainless steel and POM. This spiral cooling tower also comes with a Z-belt. The Z-belt shown is for reference only and is not the original.

Condition: like new (used), Year of construction: 2024, Pallet rack 5m high, Nedcon, 1,000kg / pallet, approx. 720 storage locations - second-hand - : Price: 21.250.- € (net) incl. delivery within Germany (without islands)! Example configuration - other configurations on request! Price per frame: € 146.50 (net) Price per trusses: 29.-€ Accessories: Price per corner collision protection 90 degrees: € 55 (net) Price per support collision protection: 14.-€ (net) Manufacturer: Nedcon Type: Pallet rack Year of manufacture: current new goods Shelf load: 3.000kg Max. Pallet weight: 1.000kg Max. usable bay load: 9,000kg (other bay loads on request) Frame Quantity: 66 pieces Frame height: 5m (other frame heights up to 7.50m available at short notice) Frame depth: 1.10m Frame bracing: bolted (frames are not delivered pre-assembled) Cross beams Quantity: 360 pieces Clear width: 2.70m (also available in 1.80m and 3.60m) Incl. ground anchor Condition: New Available: Delivery time approx. 2 - 3 weeks Location: INGABE: Project name: Example 5m high User: Alexander von Westernhagen Company: Alexander v. Westernhagen Transport Country: Germany Postal code: 60000 Project area: A Country: DE Width of goods: 800 mm Height of goods: 1250 mm Weight of goods: 1000 kg Ljdsttwi Dspfx Anxoag Pallets per compartment: 3 pallets Pallets per compartment end: 0 pallets Number of levels: 3 levels Total number of bays: 10 bays Number of bays End: 0 bays Number of single rows: 2 row(s) Number of double rows: 2 row(s) RESULT: Shelf load: 3000 kg Bay load: 9000 kg Net bay width: 2700 mm Net bay width end: 2700 mm Distance level to level: 1500 mm Frame height: 5000 mm Frame height end: 5000 mm Frame width: 1100 mm Beam height: 110 mm Number of pallet spaces: 720 units Shelf length: 28100 mm Minimum space requirement: 28300 x 17200 mm MATERIAL LIST: Id PartNo Description Amount Corr. UnitWeight Material 1 50320 Set Frame 1006820 5000x1100 450_2,R5019 54 0 61,37 FRAME 2 50320 Set frame 1006820 5000x1100 450_2,R5019 12 0 61,37 FRAME 3 50340 Set of supports CC1104015A-275 PR2-4HK 2700 360 0 14.54 BEAM 4 50346 Set of spacers NR screwed L200, se 44 0 0.36 ACC 5 57859 Anchor Fischer FAZ II plus M12/ 10 mech 264 0 0.1 ACC

Condition: ready for operation (used), Year of construction: 1986, screw diameter: 105 mm, Single screw extruder manufactured in 1986. This PREALPINA Prealpina 105 × 30D features a screw diameter of 105 mm and an output capacity of up to 300 kg/h. It is designed for processing various post-consumer plastics, including PE and PP. The machine includes essential components such as a gravimetric dosing. If you are looking to get high-quality plastic recycling capabilities, consider the PREALPINA Prealpina 105 machine we have for sale. Contact us for further details. • Machine Type: Plastic Recycling Extrusion Line Laedpfx Aezht H Rjnxog • Screw Diameter: 105 mm • L/D Ratio: 30:1 • Extruder Type: Single Screw Extruder • Material Processed: PE, PP, LDPE, HDPE (Post-consumer plastics) • Output Capacity: Up to 300 kg/h • Installed Power: 255 kW • Power Supply: 3 × 400 V + N + PE • Main Drive: Faurndau (renewed in 2021) • Degassing: Single Degassing • Barrel: Bi-metal Barrel C60/R121 • Screw Design: Ø105 mm with spiral shear and rhombic mixing section, RC3 hard-faced flights • Material Feeding System: Screw Feeding from Silo • Feeding Equipment: Feeding Screws, Elevator, Gravimetric Dosing Units, Stuffing Unit • Hopper Type: Gravity Hopper • Screen Changer / Melt Filter: Ettlinger ERF 250 (Laser-Perforated Continuous Filter) • Pelletizing System: ECON EUP 600 Underwater Pelletizing System • Machine Condition: Good Working Condition • Availability: Immediately Available, Decommissioned / Dismantled • Spare Parts Pack: New Screws and Cylinder Sets • Melt filter and underwater granulation system have already been dismantled Optional • Masterbatch Dosing • Water Bath • Water Pump • Heat Exchanger • Centrifuge • Extraction Blower • Cyclone • Vacuum Pump • Spare Parts Pack: New Screws and Cylinder Sets • Big Bag Loading Station

Condition: used, Year of construction: 2019, operating hours: 6,744 h, functionality: fully functional, machine/vehicle number: 1163744, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 18,000 m/min, rapid traverse Z-axis: 18,000 m/min, feed length X-axis: 1,016 mm, feed length Y-axis: 660 mm, feed length Z-axis: 630 mm, feed rate X-axis: 12,700 m/min, feed rate Y-axis: 12,700 m/min, feed rate Z-axis: 12,700 m/min, nominal power (apparent): 45 kVA, torque: 460 Nm, controller manufacturer: Haas, controller model: Haas, workpiece length (max.): 1,370 mm, workpiece width (max.): 610 mm, workpiece height (max.): 630 mm, workpiece weight (max.): 1,814 kg, total height: 630 mm, total length: 1,370 mm, total width: 660 mm, table width: 610 mm, table height: 630 mm, table length: 1,372 mm, table load: 1,814 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,454 h, spindle motor power: 44 W, number of slots in tool magazine: 30, Equipment: chip conveyor, We have two machines: SPECIAL PACKAGE PRICE – €125,000 FOR BOTH MACHINES Haas VF-3 YT50 (Ad ID A22113533) + Haas VF-4SS (Ad ID 22522747) Buy both machines together for €125,000. Excellent opportunity for a complete Haas machining package. • Haas VF-3YT/50, 2019. • 10,000 rpm original high-performance spindle, 44.7 kW, vector drive, gearbox • 2-speed gearbox • ISO 50 tool holder • 30 ATC (Automatic Tool Changer) • Chip conveyor with 4 additional lead screws • RTAP-3 – Synchronized threading without expensive holders with compensation • TSC 300 psi (21 bar) • Coolant chiller • Programmable coolant nozzle • MIN QTY LUBE • Automatic air gun • TAB – air cooling through the spindle Lodpfx Aozc Ni Sonxsag • Renishaw WIPS – measuring, scaling, rotation • High-speed machining • ACF 25-micron filter • Electrical cabinet cooler • Mist condenser • 4th-axis pre-wiring • DWO/TCPC • WIFI connection to local network • WIFI camera • Automatic door • 15 tool holders • 4,454 hours of cutting (Spindle On Time) • 6,744 hours of cycle time The machine is powered on and available for inspection at any time. Complete documentation available. Original paint, no accidents, no crashes. Regularly maintained machine. Immediate availability.

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Manufacturer: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine Laedpfx Ajwm Iy Esnxog This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other. Operating Principle The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle. Applications Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.

Condition: good (used), functionality: fully functional, For sale is a robust TOS Trenčín SUI 40 guide and lead screw lathe with a center distance of 1,500 mm. This machine comes from an industrial setting and impresses with its massive cast iron construction, high rigidity, and excellent smooth running. The proven SUI series from TOS is one of the most durable conventional lathes in its class and is still valued today in industry, toolmaking, and training workshops for its precision and reliability. The machine is in a well-maintained, used condition. All essential components are present. The machine bed shows a good overall condition; guides and supports appear well-maintained. The mounted three-jaw chuck, four-position tool holder, tailstock, and safety guard are included in the offer. Equipment: ✓ Center distance 1,500 mm ✓ Massive machine bed ✓ Guide and lead screw ✓ 3-jaw chuck ✓ Four-position tool holder Ljdozmp Tkepfx Anxeag ✓ Tailstock ✓ Coolant system ✓ Safety guard on the chuck ✓ Emergency stop switch ✓ Industrial version Application areas: Ideally suited for: Mechanical engineering Toolmaking Maintenance Workshops Repair shops Training workshops Single-piece and small-batch production Condition: Used Good overall condition Signs of wear consistent with age Inspection is highly recommended Sale from the current location

Condition: used, Year of construction: 2018, Overview This Krones Linatronic M is an empty bottle inspector for glass bottles, built in 2018. It inspects every empty container before filling and rejects any container that fails one of the inspection stages. The machine combines camera-based base, sealing surface, screw thread and sidewall inspection with high-frequency and infrared residual liquid and caustic detection. Two sidewall modules with four mirror assemblies and four cameras provide a compact full-front view of the container, and the DualFlash neck finish lighting inspects the outer and inner sealing surface separately using two minimally offset lighting angles. Foreign containers are identified at the machine infeed by height, contour and colour detection. Three Ecopush rejection points separate foreign, dirty and damaged containers. The machine is operated from a Krones iPanel CD terminal. Technical data - Manufacturer: Krones - Model: Linatronic M - Machine type: empty bottle inspector - Year of manufacture: 2018 - Application: inspection of empty bottles prior to filling; neck ring detection for returnable PET containers included - Inspection modules: base inspection, sealing surface inspection, screw thread inspection (cone optics), sidewall inspection - Sidewall inspection: 2 modules with 4 mirror assemblies and 4 cameras, two views per camera at 45° - Residual liquid and caustic detection: high frequency and infrared - Additional detection: polarising transparent films at container base and sidewall, glass fragments at the container base, scuffing via sidewall camera - Foreign bottle detection at the infeed: container height, contour and colour via camera - Rejection: 3 x Ecopush - foreign containers at the infeed, dirty containers and damaged containers at the discharge - Control: Krones iPanel CD operator terminal, prepared for data connection to a single-station PC (Datalyser) - Test bottle programme with 2D code - Conveyor height: 1,200 mm, adjustment range 1,155 - 1,315 mm - Minimum required room height: 2,810 mm - Overall dimensions: approx. 6,700 x 1,300 x H 2,800 mm - Direction of operation: right-left machine - Power supply: 400 / 230 V, 3/N/PE, 50 Hz, 6 A full load current, 20 A pre-fuse; auxiliary supply 230 V, 1/N/PE, 5 A - Standards: IEC 61439-1 / IEC 60204-1, CE marked - Machine base and housing: stainless steel (AISI 304 equivalent), clean design Equipment - DualFlash neck finish lighting, separate inspection of outer and inner sealing surface - Combined thread inspection via the sidewall mirror assembly - Fallen container detection in front of the machine (photoelectric sensors with infeed pusher) - Base blow-off unit with clocked air nozzle for foam and lubricant residues - Container blower at the infeed, conveyor dead plate (3-fold) - Servo-driven collection module for rejected containers at the discharge Lsdpezy Ud Isfx Anxjag - Festo pneumatic system with maintenance unit, food-grade lubricants - Emergency mode: passage operation without inspection - OEM machine data sheet and dimension drawing Condition Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: used, Year of construction: 2018, Delivery time approx. 5 months. Machine from educational use – TOP condition, low hours (edging unit unused). No tools included. Dismantling, delivery, assembly, commissioning, and training not included in the price. Includes Maestro 3D and Pro View. Lodpfx Anjzvhlksxjag MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding made for you: The CNC machining center is equipped with a comprehensive selection of edge banding tools to meet any woodworking requirement. MAIN ADVANTAGES · High performance with the advanced H80C edge banding unit, 8,000 rpm drilling spindles. The most robust spindle technology on the market, offering over 1,000 maintenance-free operating hours. · Better equipped: Suction cups can be disabled and configured via the FLEX worktable to optimally adapt the machine to requirements. · Easier, more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies “MAESTRO EDGE”. · Easier operation: The lowered frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are needed. Base structure: The base frame is a monolithic construction made from thick-walled steel, reinforced across the entire machine bed with welded square plates for exceptional rigidity. The bed’s shape, with a wide base, is the secret to lasting precision and stability. The load-bearing structure consists of a particularly robust, monolithic steel base, heavily ribbed and highly stiffened; the extra-wide support was specially designed to give the machine maximum stability, ensuring lasting precision regardless of operating conditions—with no need for floor anchoring. The base provides a large, solid support for the moving gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of handling the highest loads, ensuring top-quality performance and greater accuracy. The moving gantry is made from a robust single piece anchored to the base, sliding along top-quality prismatic guides with recirculating ball carriages. The working unit is attached and moves along the Y and Z axes on prismatic guides with recirculating ball carriages. Movement of the lower carriage (X-axis) and the working unit along the moving carriage (Y-axis) is enabled by rack-and-pinion transmission with helical teeth. This design results in greater tooth-on-tooth engagement, delivering higher acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, ensuring perfect balance with dynamic loads and smooth acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for maximum finishing quality.

Condition: like new (used), Year of construction: 2019, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 65487, Equipment: documentation/manual, For sale is an Innomatec LTC-802 M Leak Test Computer in like-new condition, from our company’s inventory. The device was factory-calibrated by Innomatec in 2026 and will be sold including a current factory calibration certificate. According to the manufacturer, there are currently no restrictions regarding service or spare parts availability. Manufacturer: Innomatec Mess und Schnellanschluss Model: LTC - 802 M Year of manufacture: 2019 Condition: like new Category ID: 404 Type ID: 2224 Type: Measuring system Technical data Manufacturer: Innomatec Model: LTC-802 M Year of manufacture: 2019 Mass flow method Pressure range: 0.05 to 5 bar Single-channel leak test device Configurable testing system Suitable for large-volume components Factory calibration 2026 Scope of delivery: Innomatec LTC-802 M Original power supply Accessories as shown in the photos Factory calibration certificate Ledpfszltyfjx Anxeag Operating instructions (as shown in the photos) Application areas Automotive industry Medical technology Industrial manufacturing Quality assurance Leak testing Automated production systems Condition Like-new condition Factory-calibrated by Innomatec (2026) Completely cleaned Ready for immediate use Note: The photos of the current factory calibration certificate are part of the listing and can be found in the attached images. Sale is made by a company with an invoice. Inspection possible by appointment. If you have any questions or need more information, please feel free to send us a message or call us.

Condition: reconditioned (used), functionality: fully functional, screw conveyor diameter: 27 mm, Warehouse – No. 2875 1 used compounding and granulation line, partially overhauled in 2026 and functionally tested, consisting of: Brabender gravimetric 2-component dosing system (expandable, optional at extra cost) with 1x FlexWall 40, 1x DDW-MD5, Congrav RC4 stand-alone control Twin-screw extruder Leistritz type ZSE 27 HP Co-rotating, self-cleaning, segmented screws and cylinder with intensive cooling. Screws 2x Ø 27 mm - 36 L/D with 8 cylinder zones with 3 degassing zones, 1 vacuum pump 1.5 kW Screw speed up to 1,200 rpm - adjustable Extruder drive 33.8 kW - heating power 9.8 kW installed Melt pressure sensor Control system Macromatex III MAAG Gala underwater granulation system type LPU, model SLC 5, including: Polymer start-up valve with hydraulics Die plate 20°, granulator SLC 5 with 1.5 kW drive Water box – temperature-controlled water system with Ledpfx Anjz A Sxljxeag Granulate centrifugal dryer type 1150, 1.5 kW drive Xantec control system Siemens Accessories: Single tempering unit for the extruder processing section The system is ready for demonstration; a test run / sample production with your material is possible on short notice. Details and dates upon request. We have other compounding extruders available ex-works: Alphatec, Coperion, Leistritz, Berstorff-Krauss Maffei, as well as all accessories: granulation systems (BKG - MAAG gala, Sikoplast, IPS, Scheer, ...), melt filters (BKG, Ettlinger, Alphatec, ...). Commissioning / training for all our systems can be carried out by our technicians; details upon request.

Condition: like new (used), Year of construction: 2004, functionality: fully functional, overall weight: 4,000 kg, total height: 2,100 mm, total width: 6,200 mm, type of input current: three-phase, input voltage: 400 V, control cabinet height: 1,800 mm, input current: 1,250 A, Siemens Sikus Type 3200 Power Distribution Panel Sub-distribution switch cabinet, distribution panel, power distribution board 400V 1250A (for further information, please refer to image 21) 9x single cabinets 600mm – 1x 800mm = total length 6200mm (contrary to the drawing: 10x 600mm!!) Cabinet dimensions approx. H210xW60/80xD60cm each, incl. plinth and lifting eyes Connection from transformer 1250A to circuit breaker (Siemens 3WN6361-DWA05-1KA1) with coupling switch etc. (images of the circuit diagrams are attached). Three identical Siemens circuit breakers are installed. Equipped with multiple transformer metering on the main switch and residual current monitoring Laodpfx Anjynv H Ioxsg Busbar rated up to max 1600A Outgoing circuits: circuit breakers – Neozed NH00, NH1 fuses, etc. Excellent condition – almost as new – see pictures The dismantling was carried out by a professional electrical company. All copper busbar connectors and screws are included. Internal wiring for energy metering is pulled back and labeled. The cabinets are dismantled and packed on 5 pallets. Weight approx. 4000kg Collection only by appointment in 75053 Gondelsheim Forklift available for loading Shipping by freight forwarder possible, please inquire with ZIP code

Year of construction: 2017, condition: used, Manufacturer : Transvis Type: Semi-automatic cap screwdriver Application: screwing / capping Year: 2017 Maximum product dimensions: Ø 54.5 x 82 mm Minimum product dimensions: Ø 45.5 x 68 mm Product weight: 90–150 g HMI control panel Lodpfjy H Rfqex Anxeag Asynchronous motor power: 0.18 kW Two-hand control Torque control Overall dimensions: 650 x 1000 x 1800 Screw capper dimensions: 650 x 935 x 990 Weight : 100 kg Spare parts and formats available Power supply: 220V single-phase / 6 bar compressed air Technical documentation available Video available in running condition

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 10 h, control type: CNC control, We are offering a near-new ERBEND D-SFA 4230 CNC folding machine on behalf of one of our customers. This machine has less than 10 operating hours and is in absolute mint condition. A unique opportunity to acquire a high-end CNC folding machine without long lead times. Technical Specifications: This servo-driven folding machine is built for precision, speed, and flexibility: Working length: 4200 mm Capacity steel (S235): 3 mm Capacity stainless steel: 2 mm Capacity aluminium: 4 mm Machine dimensions: 2200 x 6100 x 2300 mm Machine weight: 11,800 kg Positioning accuracy: ± 0.1 mm Thanks to the servo drives and ball screw system, the machine guarantees high precision and reliability. Ledpfxjy Idp Eo Anxoag Configuration & Equipment This machine is fully equipped and ready for immediate production: CNC control (Erfold 3D) with full 2D/3D programming and simulation Double bending system (upward and downward bending for higher productivity) U-type back gauge (4200 mm) with pneumatic fingers Integrated suction cups for stable sheet positioning Complete segmented tooling set (top & bottom) 200 mm high upper tooling with pneumatic clamping Motorized CNC axis adjustments (A-B-D axes) Manual crowning system for optimal bending results Foot pedal with 3 functions + safety light guards Additionally equipped with motorized clamping beam and folding beam, ensuring fast and accurate processing Condition Less than 10 operating hours Fully operational and available for inspection under power No wear – in like-new condition Available immediately Applications / Industries This folding machine is ideal for: Sheet metal fabrication companies Roofing and façade cladding HVAC production Machinery and construction industry Interior and custom metalwork Both single-piece production and serial manufacturing The double bending capability combined with 3D CNC control makes it highly suitable for complex parts as well as efficient batch production. Why this machine? Like-new condition at a significant cost advantage No delivery time Fully equipped and production-ready Large working length (4200 mm) Proven ERBEND quality Interested or want to schedule a viewing? Contact us for more information or to see the machine in operation.

Condition: excellent (used), Year of construction: 2008, operating hours: 29,000 h, functionality: fully functional, MANDELLI Storm 2500 Horizontal Machining Center / Flexible Manufacturing Cell Manufacturer: Mandelli Sistemi S.p.A. Model: Storm 2500 Type: U 42 / 8000 Factory No.: XXXX Year of manufacture: 2008 Origin: Italy Control: Siemens Sinumerik 840D System Control: CswWin / Beckhoff Industrial PC Condition/Maintenance: Very good / Single-shift machine / Very low operating hours Technical Data: X-axis travel: 2,600 mm Y-axis travel: 1,500 mm Z-axis travel: 1,800 mm B-axis: 360,000 positions / continuous APC / Pallet axis: 360,000 positions Rapid traverse linear axes: 35 m/min B-axis speed: 8 rpm Accuracy to VDI 3441: Positioning accuracy P: 10 µm Repeatability Ps: 5 µm Spindle / Head: U-head horizontal / vertical Spindle taper: ISO SK 50 Speed range: 37 – 6,000 rpm Spindle power: 44 kW Max. torque: 706 Nm Tool Magazine: 208 tool positions Rack tool magazine with automatic tool handling Max. tool length: 600 mm Max. tool diameter: 450 mm Max. tool weight: 35 kg Pallet System: Front transpallet / automatic pallet change system 6 pallets, each 1,000 x 1,250 mm 4 fixed stations Rotary unit for loading and unloading workpieces Electrical Data (as per nameplate): System: S2500 / 840D Rated voltage: AC 400 V, 3 Ph / PE Frequency: 50 Hz Current at full load: 178 A AC auxiliary voltage: 230 V DC auxiliary voltage: 24 V Standard: IEC 60204-1 / EN 60204-1 Chip Conveyor: Manufacturer: Meta Year of manufacture: 2007 Weight: approx. 1,100 kg Additionally, a screw conveyor is visible in the machine area. Equipment / Peripherals: Filtration unit Hydraulic power unit Chip conveyor Screw conveyor COSEMA peripheral unit Control cabinet system Coolant and lubricant periphery Separate operator panel Comprehensive pallet system Clamping Devices / Fixtures: Multiple heavy-duty angle plates, fixture plates, t-slotted/platen clamping plates, customer-specific clamping devices, and pallet setups are available. Tools / Accessories: Ljdpfey H D R Tex Anxoag Numerous SK50 tool holders, boring bars, boring tools, milling holders, drill and reaming tool holders, extensions, adapters, as well as various spare and standard tools are visible. Several hundred additional tool holders can be purchased on request. Optional / On Request: Apfel tool cabinets with extensive tool inventory Additional clamping devices and fixtures ELBO CONTROLLI tool presetting unit Workbenches / tool storage / racking systems by agreement The machine is in good, production-ready condition. This is a heavy-duty horizontal machining cell for the flexible complete machining of large and complex workpieces. The work area shows normal signs of wear characteristic of a production heavy machining system. The system must be removed from the facility in June 2026. Earlier availability possible by arrangement. Inspection under power is possible by appointment. All information provided to the best of our knowledge. Subject to errors, prior sale, and technical modifications.

Condition: used, functionality: fully functional, Sawmill for sale: Ledpov Hm T Sjfx Anxsag The line starts with a Bongioanni bandsaw and a Costa Multiprisma sawmill. Due to their design, they are suitable for processing both soft and hard hardwoods. The price includes the lines, additional machines (dust extraction, recycling machines) as well as the necessary saw blades and spare parts. The sawmill can be viewed in Cegléd, Hungary, by prior arrangement. Line 1: - 1-1 Log yard with single-sawn saw - 1-2 Costa Multiprisma: 280 two-axis prism saw with log turner, 60-80 m3/8 hours depending on the wood species and diameter - 1-3 Roller conveyor with discharger - 1-4 Custom-built cross-cut saw: for single-size cutting, with size adjustment option. - 1-5 Conveyor belts for transporting lump waste. - 1-6 Grinder (drum) - 1-7 Grinder conveyors: screw conveyor, bucket elevator, chute, direct loading onto wagon/truck 2nd line: - 2-1 Log store with splitter - 2-2 Log conveyor track, with drop-off - 2-3 Intermediate log store with splitter - 2-4 Bongioanni log splitting bandsaw and trolley, with 1300 digital control, multiple size presetting options, sheet deflection indicator, laser ruler, 25-45 m3/8 hours; depending on the type of wood, diameter and cut pattern - 2-5 Roller conveyor with ejectors - 2-6 Cross conveyor with singler - 2-7 Storti TGS-78 cutting saw: with digital control, three saw units for up to double the size of the cut - 2-8 Roller conveyor with graders - 2-9 Intermediate prism magazine - 2-10 Roller conveyor - 2-11 Costa Leopard II. series cutter, with 2-axis automatic feed and power control - 2-12 Roller conveyor with ejector and sorting table - 2-13 Conveyor belts for lump waste - 2-14 Grinder (drum) - 2-15 Grinder conveyors: screw conveyor, bucket elevator, rédlers (walking floor truck loading option) 3. Auxiliary machines: - 3-1 E. Gillet slitting band saw, associated conveyors, manipulator, feed mechanism - 3-2 Joiner's band saw (800) - 3-3 Pallet cube cutting machine (starboard) - 3-4 SOCOLEST Valdoi double edge circular saw, with conveyors, cutting circular saw - 3-5 VEB STANDARD single-axis formatting circular saw - 3-6 STVO single-axis formatting circular saw machine

Condition: ready for operation (used), Year of construction: 2022, number of axes: 6, This 6-axis FANUC LR Mate 200 iD 14L robot arm was manufactured in 2022. It features a lightweight controller at 40 kg, operates on 200-230 V~ AC, and is designed for single-phase power with a consumption of 1.2 kVA. It meets CE, EMC, and EN55011 (Group 1, Class A) safety certifications. Consider the opportunity to buy this FANUC LR Mate 200 iD 14L robot arm. Contact us for more information about this machine. Machine Benefits Lsdozvmhwjpfx Anxsag Technical Machine Benefits • Weight of the robot controller: 40 kg • Input voltage: 200-230 v~ (alternating current) • Phases: 1 phase • Mains frequency: 50/60 hz • Safety certifications: ce, emc, en55011 (group 1, class a) • Robot is completely new and has 0 operating hours!

Condition: repair required (used), Year of construction: 2010, operating hours: 64,380 h, functionality: unexamined, power: 132 kW (179.47 HP), volume flow: 1,562.4 m³/h, pressure (max.): 8.1 bar, type of cooling: water, Screw compressor Atlas Copco GA132VSDW Inverter integrated 132 kW 8.10 bar 26.04 m3/min Lsdpfx Aozznqkonxsag Year of manufacture: 2010 Operating hours: 64,380 h

Condition: used, Year of construction: 2005, functionality: fully functional, Equipment: CE marking, HOMAG OPTIMAT BAZ211 VENTURE 20 (Router No. 5) Year of manufacture: 2005 Basic structure and drives • Machine bed: Heavy-duty, stable design with compact linear guides. • X and Y axis drives: Digital AC servo motors and rack and pinion gears with pre-tensioning for backlash-free operation. • Z axis drive: Digital AC servo motor with ball screw; travel range is 535 mm. • Lubrication: Manual central lubrication for all drives and linear guides. Main spindle and C axis • Power: 11 kW in S6 mode (7.5 kW in S1). • Cooling: Liquid-cooled, vector-controlled asynchronous motor. • Speed range: Continuously programmable from 0 to 18,000 rpm. • Tool holder: HSK F63 according to DIN 69893. • C axis: Equipped with an aggregate interface, pneumatic interface, and 3-point support. Clamping system (Cantilever table) • Cantilevers: 6 pieces with a tubeless, dual-circuit vacuum system. • Stops: 6 longitudinal stops in the cantilevers (stroke 140 mm) and 2 adjustable lateral stops. • Suction cup equipment: • 10x dual-action vacuum suction cups (160x115x100 mm), 4 with integrated lift. • 2x dual-action vacuum suction cups (125x75 mm). Lodpfjzr N H Ujx Anxjag • Pneumatics: 4 connections with a single-circuit system for mechanical clamps. Workpiece dimensions • Length (X): Max. 3050 mm (individual setup) or 900 mm (shuttle mode). • Width (Y): Max. 1220 mm for milling; max. 1150 mm for all aggregates. • Thickness (Z): Max. 60 mm with standard suction cups; up to 300 mm including fixtures for top-side milling. • Minimum thickness: 12 mm for chamfering, 16 mm for radius milling. Tool changer and accessories • Type: Disc-type tool changer (12 positions) for HSK F63 tools and aggregates. • Diameter capacity: 12x max. 135 mm, or a combination of 6x 180 mm and 6x 85 mm. • Vacuum system: Liquid ring pump with a capacity of 66 m³/h (equivalent to 100 m³/h for vane pumps). Control system (Power Control PC85) • Hardware: Industrial PC (2 GHz) with 512 MB RAM, a hard drive for data and a second for backup (cloning). • Software: • woodWOP: Graphical interface for CNC programming. • woodDesign: 3D interface for furniture design. • woodScout (optional): Graphical diagnostic system. • Communication: Ethernet card and modem for remote diagnostics.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, power: 9 kW (12.24 HP), cutting width (max.): 450 mm, control type: CNC control, overall weight: 6,100 kg, Equipment: CE marking, documentation/manual, in production from 2023 / 1 shift only, 6200 hours band 6830 x 54x1,3 It is a highly efficient automatic,band-saw with multiple material feed. Bandsaw is designed for performance cutting of very hard and tough materials. This bandsaw is using extremely robust construction optimized with target to get maximum rigidity of machine and minimum vibrations. Stroke of frame and feeder stroke is realized by sharpened ball screws. Machine guarantees maximum possible power a precision. The machine is designed for vertical cuts. It is suitable for serial production in industrial premises. The machine is designed to saw steel materials, but also non-ferrous and light metals. However, we recommend consulting the manufacturer about this option. Conception of bandsaw is FCV= feeder-cut-main vice. Conception FCV enable cut material in automatic cycle with shortest possible end. Laodpfeykkqgox Anxsg Cutting parameters The shortest cutting mm 10 The smallest divisible diameter mm 30 The shortest rest during one cut mm 40 The shortest rest during automatic cut mm 90 Single step of material feed Min mm 3 Single step of material feed Max mm 730 Multiple feed mm 19999 Performance parameters Blade dimensions mm 6830x54x1,3 Blade speed m/min 20-150 Blade drive kW 9 Pump of the cooling emulsion kW 0,16 Blade cleaning brush motor kW 0,12 Chip conveyor motor kW 0,12 Motor of the blade drive cooling kW 0,6 Frame ballscrew motor kW 0,5 Feeder ballscrew motor kW 1,5 Electric input Ps kW 17,7 Installed power Ps kW 12,8 Electrical connection 3 x 400V, 50Hz, TN-S

Condition: like new (used), Year of construction: 2017, functionality: fully functional, KASTO KASTOwin pro AC 5.6 metal band saw, automatic (2017) Manufacturer: KASTO Type: KASTOwin pro AC 5.6 metal band saw, automatic Year of manufacture: 2017 Condition: As new Cutting range: 560 x 560 mm Smallest cutting dimension: 25 x 25 mm Ljdpfxozy Sbde Anxeag Cutting speed: 12–150 m/min Saw motor power: 11 kW Shortest remaining piece length: 10 mm in single cut, 35 mm in automatic mode Feed system: electromechanical feed via two ball screws, each with its own servo drive, infinitely adjustable. Retraction unit on both sides for lifting the saw band during the return stroke – protects the tool and cutting surface. Two electrically driven, self-adjusting cleaning brushes for removing chips from the saw band. Automatic adjustment of the band guide arm to the material width. Control system: ExpertControl with a larger display and automatic material height detection. Total weight: 4,300 kg

Condition: like new (used), Equipment: type plate available, Used stainless steel transport container Prepared for agitator Type: SBPA150 Item number: 10796 Volume: 173 liters Type: Upright design on pallet Design: Single-walled, 1.5mm wall thickness Material (wetted parts): 1.4301 stainless steel Surface: Satin-finished outside, IIId inside Internal weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top: 1/2 hinged lid Underbody: dished bottom with outlet bead Tank dimensions: Tank diameter: 650mm Total height: 815mm Pallet: 675 x 719mm Equipment: 1x 1/2 hinged lid on the top, latching function (lid can be latched in open 90° position) Stainless steel sheet metal grates underneath the hinged lid, screwed, removable Laodpfxer A Enge Anxog DN50 ball valve outlet fitting DIN11851 Galvanized transport pallet Type plate

Year of construction: 2003, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 041-03, Stock No. 2834 TECNOVA mini 60 granulation system, partially overhauled, in working order, ready for demonstration, consisting of: Material feed hopper Stuffing unit TECNOVA single-screw extruder with 60 mm screw – 36 L/D – cylinder, air-cooled 1 degassing unit with vacuum pump Extruder drive 30 kW, screw speed up to 200 rpm Melt filter/screen changer Hot-face granulator, complete with die plate and knife bar Granulate/pellet blower Control cabinet, relay control A test run/sample production with your material can be arranged on short notice; details and schedule upon request. OPTIONALLY, the system can also be equipped with strand granulation; details upon request. Lodpez A Ti Ejfx Anxjag Further granulation systems/extruders ready for demonstration are available ex-works Wuppertal.

Condition: used, Year of construction: 1992, Kaeser BS61 Screw Compressor Fully automatic, fully piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-damped. Discharge pressure: 10,00 bar Motor power: 37.00 kW Free air delivery: 5,25 m³/min Lodsypklbspfx Anxoag

Condition: good (used), Ktron Soder Screw feeder Lodjz Ak Sgopfx Anxsag Stainless screw feeder, batch feeder, 150Kg stainless hopper, twin screws, 35mm screw diameter, 3Ph

Year of construction: 2024, condition: excellent (used), functionality: fully functional, Complete extrusion line / extrusion system including packaging technology For sale is a complete, fully operational extrusion system for food products. The system consists of several coordinated components and covers the production process from mixing the raw materials through extrusion, drying, and cooling to packaging. The mixer is designed for batches of up to approximately 300 kg. The installed single-screw extruder achieves – depending on the raw materials used, the recipe, and the process parameters – a production output of approximately 70–90 kg per hour. Scope of supply / components of the extrusion line: 1. Mixer – designed for up to approximately 300 kg 2. Single-screw extruder – output approximately 70–90 kg/h 3. Conveyor screw / conveyor system 4. 3 × product or intermediate hoppers 5. Drying oven / belt dryer – approximately 5 meters long 6. Exhaust and ventilation system 7. Cooling system / cooling drum 8. Doypack packaging machine 9. Flowpack packaging machine The system enables a largely continuous production process from raw material preparation to the finished, packaged end product. Technical design All components were manufactured in Ukraine and are CE-certified. All parts and surfaces that come into direct contact with the product during the production process are made of stainless steel. The entire production line has a length of approximately 28 meters in the configuration shown. Individual machines and components can be arranged differently if necessary, depending on the available production space. Possible applications The extrusion system is suitable, for example, for the production of: Puffed and snack products rice or grain-based products cereals and extruded products functional snacks other extrudable food products The actual production output and the final product depend on the raw materials, recipe, die, and the respective extrusion and drying parameters. Inspection of the system is possible after prior appointment. We will be happy to provide further technical information, images, and details on the individual machines upon request. Laedpeztkxbjfx Anxeg It is also possible to purchase the individual machines separately. The price list is as follows: 1. Mixer – designed for up to approximately 300 kg - €5,000.00 2. Single-screw extruder – output approximately 70–90 kg/h - €15,000 3. Conveyor screw / conveyor system - €2,500.00 4. 3 × product or intermediate hoppers - €1,000.00 per hopper 5. Drying oven / belt dryer – approximately 5 meters long - €20,000 6. Exhaust and ventilation system - €500.00 7. Cooling system / cooling drum - €2,000 8. Doypack packaging machine - €18,000 9. Flowpack packaging machine - €15,000