Used Index G300 for sale (1,339)

Condition: ready for operation (used), Year of construction: 2006, operating hours: 31,900 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: OKUMA, controller model: OSP-200M, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis Okuma MA-600HB was manufactured in 2006. It features a maximum spindle speed of 12,000 RPM and a BT50 tool holder. The machine is equipped with a coolant system in the spindle at 30 bar and includes a Renishaw MP10 for tool measurement. If you are looking to get high-quality machining capabilities, consider the Okuma MA-600HB horizontal machining centre we have for sale. Contact us for further details. • Coolant through spindle: 30 bar • Tool breakage detection • MOP-Tool • DNC-DT Additional equipment • NC table 0,001 (NC rotary/indexing table) • Renishaw MP10 probe • Mayfran MT10 (chip conveyor/coolant handling) Technical Specification Fsdpfx Alszx D Dzo Segh Taper Size BT 50

Condition: ready for operation (used), Year of construction: 2020, laser power: 3,000 W, number of axes: 3, Tube cutting machine manufactured in 2020. This Bodor X2260 features a powerful 3 kW laser and is equipped with a CNC control panel interface, automatic chuck system, and a dedicated extraction system. It also includes a tube support roller and conveyor loading bed for enhanced efficiency. If you are looking to get high-quality tube cutting capabilities, consider the Bodor X2260 machine we have for sale. Contact us for further details. Fgjdpjzzzucefx Al Ssh - Laser Power: 3 kW- Axis Configuration: Rotational chucking system for tube indexing and linear feed axes- Features: Automatic/pneumatic chuck system, tube support roller/conveyor loading bed, CNC control station with touchscreen interface, keyboard & mouse, dedicated Bodor extraction/filtration unit- Condition: Very well maintained, low operating hours

Condition: ready for operation (used), Year of construction: 2012, operating hours: 50,106 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840 D solutionline, spindle speed (max.): 9,000 rpm, spindle motor power: 16,000 W, number of axes: 5, This 5-axis Matec 30 HV vertical machining centre was manufactured in 2012. It features a generous X-axis travel of 3000 mm, Y-axis travel of 800 mm, and Z-axis travel of 800 mm (horizontal). The machine is equipped with a powerful motor spindle, capable of speeds up to 9000 rpm, and a maximum table load of approximately 2500 kg. If you are looking to get high-quality machining capabilities, consider the Matec 30 HV machine we have for sale. Contact us for further details. • Travel Z: 800 mm (horizontal) • Travel Z: 700 mm (vertical) • Tilting swivel head with 1° indexing (Hirth coupling) • Swivel radius: 250 mm • Spindle power: 16 kW (40% duty cycle) • Spindle power: 11 kW (100% duty cycle) • Torque: 100 Nm (40% duty cycle) • Voltage: 400 V • Installed power: 55 kW • Central lubrication system • Machine status: fully functional • Operating hours: 50,106 h Fjdpfxeyrqvlj Al Sogh Additional equipment • NC rotary table Ø800 mm (horizontal), maximum table load approx. 2500 kg • Internal coolant supply through spindle (20 bar) • Paper band filter coolant system with approx. 450 l tank • Electronic handwheel • 3D measuring probe (Renishaw) • Work area lightingPlease note: the vice and zero-point clamping system shown are not included in the scope of delivery. Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2011, operating hours: 80,000 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 40 mm, displacement volume: 201 cm³, total length: 5,245 mm, total width: 1,525 mm, total height: 2,300 mm, overall weight: 7,200 kg, input frequency: 50 Hz, input voltage: 400 V, The machine comes from the current series production of a plastics processor and, according to the previous owner, is fully functional. An inspection at the production facility is possible after scheduling an appointment. Key data (according to manufacturer's specifications ENGEL) • Clamping force 1,200 kN (120 t), tie-barless clamping unit • Platen dimensions 790 × 790 mm (Wide Platen), minimum tool size 350 × 350 mm • Tool installation height min. 400 mm, opening stroke 506 mm, max. platen distance 900 mm • Ejector 130 mm stroke, 39.8 kN • Injection unit 1 (330H, horizontal): screw Ø 40 mm, displacement volume 201 cm³, specific injection pressure 1,221 bar / increased 1,667 bar • Injection unit 2 (80W, angled position): displacement volume 38 cm³ (screw Ø 22 mm) or 49 cm³ (Ø 25 mm) [CHECK 09/25: which screw] Fsdpfxsz Eimfe Al Sogh • Hydraulics: pump drive 30 kW, oil capacity 300 l • Connection 3 × 400 V, 50 Hz, 139 kW / 220 A • Control system ENGEL CC 200 [CHECK 09/25] • Operating hours 87,300 h (as of 09/2026); plasticizing cylinder Ø 40 mm from 2021 with 20,300 h (according to the previous owner) Your advantages • Tie-barless: The tool space is free from tie bars. Large and bulky tools with core pulls can be accommodated, for which a larger clamping force class would often be required in tie-bar machines. • Short setup times: Tools are installed from the side without tie-bar removal. • Automation: Robots travel horizontally into the tool space – smaller cell, lower hall height, shorter cycles. • Tool-friendly: Platen parallelism via the patented ENGEL Flex-Link system (according to the manufacturer). • Hydraulic connections for core pulls, parallel movements programmable (according to the previous owner) – for tools with sliders, undercuts and thread cores. • Combi version with space for a rotary table or indexing plate (according to the manufacturer). • Main injection unit with a newer plasticizing cylinder (2021). • Second injection unit, according to the previous owner, was not used in operation, therefore minimal wear. [CHECK 09/25: unit available + free injection test] Typical applications 2K hard/soft and two-color: handles with TPE zone, housings with molded-in seal, switches and operating elements, connectors with seal, rollers with soft tread, closures with sealing lip, cable glands, medical components, two-color design parts. Single-component: technical precision parts and parts with inserts. Scope of supply • Injection molding machine as described [CHECK 09/25: with both injection units] • ENGEL data sheet, layout plan, platen drawing Not included in the scope of supply: the peripherals visible in the photos (removal/automation with protective enclosure, temperature control units, material handling and drying, mobile switch cabinet) and tools. Terms and conditions • Price on request • Available presumably from week 48/2026 • Payment 100% advance payment • Transport throughout Europe on request Note: The technical specifications are based on the manufacturer's documentation and the information provided by the previous owner. They are for informational purposes only and do not constitute an agreement on the condition or a warranty within the meaning of §§ 434, 443 BGB. We will confirm individual values during the inspection or upon request. Offer subject to change, prior sale reserved.

Condition: used, mileage: 100 km, power: 157 kW (213.46 HP), first registration: 03/2026, fuel type: diesel, overall weight: 7,500 kg, gearing type: mechanical, number of seats: 2, loading space length: 4,200 mm, Equipment: ABS, air conditioning, soot filter, Vehicle number: 540075 accident-free, service history, non-smoker ---- ASSISTANCE SYSTEMS * Lane change warning system * Start-off assistant * Rear view camera ENGINE TRANSMISSION & CHASSIS * Traction control (ASR) INTERIOR * Air conditioning LIGHT & VISIBILITY * Green tinted windows * Side marker lights * Daytime running lights Other features * Chassis color anthracite gray * Driver's cab color E1980 crystal white * Headlight insert. and bumper: Stone Grey * Cab steps and fenders Stone Grey * Wheel trim rings silver grey * Goodyear * Tire pressure monitoring system * Front axle(s): 215/75R17.5 * Driven rear axle(s): 215/75R17.5 * Without spare tire * Steel disc wheels, silver grey * Pneumatic steering column lock * Soft-touch steering wheel, color black * Roof hatch with manual operation * Driver's seat: Air-sprung luxury driver's seat * Passenger double seat, velour cover * Converter 24 V to 12 V, 15 A, 180 W * Emissions class Euro 6 * Manual transmission, 6 gears * Rear axle ratio 3.73 * Mechanical differential lock * 6-speed manual transmission 6S800 OD, 6.58-0.78 * Engine PX-5, 153 kW/208 hp. Cab emblem: 210 * Wheelbase 3.15 m / rear overhang 1.32 m * Standard component layout * Tank for AdBlue 30 l, right side of the chassis * Fuel tank left * AdBlue tank filler cap without locking * Rear underrun protection * Tail lights with bulbs * Battery box left, no spare wheel holder * Longitudinal member 210/4.5 mm, without internal reinforcement * EAS unit right, central discharge * Plastic fuel tank, 110 l * Maximum ambient temperature 38 degrees * Temperate climate * Air intake above, behind the cab * Water separator, heated * Body fastening method BAM 1, console type B * Fixed plug connection. Front driver's cab * Tail lift application * Use with drawbar, type plate, up to max. GVW * Pneumatic connection for trailer, swivel coupling * Crossbar D85-Dc70-V25 ball coupling D85, mounted * Electrical connection for trailer 24V/2x7-pin + 12 V * FGG chassis weight max. 7500 kg * Max. total train weight drive power 18000 kg * First transmission auxiliary drive N./4c-U-32/25 * Exhaust brake * Parking brake actuation with test position * Reverse alarm system * Basic immobilizer * DAF Side and Turn Assist * Alcohol lock, prepared * Electronic stability control (VSC) * Speed limit detection * DAF Drowsiness Detection * Rubber cab suspension, mechanical * Short-haul cab * Side not glazed / rear single glazed * 5 mirrors * Electrically adjustable mirrors * Mirror brackets, structure 2.50 - 2.60 m * Sun visor outside, green, translucent * Headlight beam for right-hand traffic * Halogen headlights with height adjustment * Adaptive Cruise Control with FCW and AEBS-3 * Digital tachograph, VDO 1C, version G2V2 * Speed limiter setting 85 km/h nom. * PACCAR Connect * Antennas: AM/FM + GSM + GPS * FMS connection, prepared * DAF Infotainment System: DAB radio with loudspeaker * Front: 3.60 t, parabola, raised, HD, F36 * Rear axle: 5.00 t, parabola, raised, SR 5.14 * Front axle 1, 3,200 kg, load index 124 Fodpfjx Egr Isx Al Sjgh * Rear axle 1, 5000 kg, load index 116 * Generator 100 A, batteries 2x 125 Ah * Guarantee Plus drive train-3 years-200,000 km * Meiller DSK Type 3 model 11 * Plug-in storage rack as bulkhead attachment. ---- Subject to prior sale and errors.

Condition: used, mileage: 500,412 km, power: 355 kW (482.67 HP), first registration: 08/2022, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 08/2023, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, FT XG 480 Maximum ambient temperature: 38 degrees Rear: SR1344 air suspension Main mirrors Pneumatic control for parking brake Type plate: Standard (EC) Maneuvering mode Armrests on both sides of the driver's seat 12-speed TraXon gearbox 12TX2210 DD, 16.69-1.00 LED skylights Dashboard design: Plateau Front leaf suspension: standard Interior trim color: Exclusive Co-driver's seat, fixed base Parking heater with waste heat pump and timer Cab, interior trim: Hexagon LED interior lighting Dashboard table Automatic transmission with manual override - full version Front chassis floor design: Base plate Basic immobilizer Stabilink rear axle suspension Driven rear axle(s): 315/70 R22.5 Anti-slip control (ASR) CRYSTAL WHITE Drive axle with disc brakes Steel disc wheels, silver-gray Running board/step, left side Work lights, LED Eco-Fuel Heated fuel pre-filter DAF Connect Adaptive Cruise Control with FCW and AEBS-3 Front axle 1, 8,000 kg, load capacity index 156 Electronic Stability Control (VSC) Lane change warning system Pollen filter Brake performance monitoring LED daytime running lights Driver Performance Assistant Central locking Generator 150 A, batteries 2 x 210 Ah LED headlights, cornering and fog lights Electrical trailer connection 24V/15-pole, cable: 15-pole + EBS 1195-liter aluminum fuel tanks: 765 liters left + 430 liters right, H 620 mm Wheelbase 4.00 m / rear overhang 0.99 m Antennas: DAB preparation, 2x mobile, GNSS extra: CB Upper bunk Analog control of auxiliary gearbox, no 1st auxiliary gearbox DAF Infotainment Exclusive with luxury speakers Cab air-suspended Reversing warning system MX-13 engine, 355kW/483PS, cab emblem: 480 Armrests on both sides of the co-driver's seat DAF Corner View Two LED lights for the rear of the cab Turning assistant Driver's seat, swivel base ZF Intarder Steering wheel, leather Mechanical differential lock Xtra Comfort mattress for lower bunk Front axle(s): 385/55R22.5 Digital tachograph, VDO 1C Rear lights with LEDs Exterior sun visor Preparation for compressed air system Side fender, extended Co-driver's seat: cinema and lamp, table, fabric upholstery Emission standard Euro 6 Parking brake assistant Refrigerator and drawer Storage compartment with drawer in the center console Speed limiter set to 90 km/h Automatic cab climate control ECAS remote control with extended functions Driver's seat: Luxury Air Rear axle ratio 2.38 Battery energy monitoring Aluminum compressed air tank Signal horns, 2 sets R1, 315/70R22.5 Fedpfxsz Ifczj Al Ssgh F1, 385/55R22.5 Wind deflectors for side windows Auxiliary air conditioning unit, roof NGD DAF Cool Ultimate Lift axle switch Compressed air gun in the cab CB radio 40 channels Cold power socket for coffee machine Voltage converter 1,800 Watt sine wave

Condition: used, mileage: 45,000 km, power: 390 kW (530.25 HP), first registration: 06/2025, fuel type: diesel, overall weight: 18,000 kg, gearing type: automatic, emission class: euro6, Equipment: soot filter, Vehicle number: 550025 1st owner, accident-free, service book maintained, non-smoker ---- ASSISTANCE SYSTEMS * Lane Change Warning System EXTERIOR * Sun visor, exterior OTHER EQUIPMENT * ZF Intarder Additional Features -----Color/Paintwork----- Chassis color: Anthracite gray * Cab color: E1980WHTE CRYSTAL WHITE -----Tires/Wheels----- Goodyear * RR, not applicable * Front axle(s): 385/55R22.5 * Aluminum Alcoa Dura-Bright 32 mm * F1,385/55R22.5GO EQMS 160/150 K Steering BBA 3P * R1,315/70R22.5GO EQMDU 154/150 L Traction ABB 3P -----Equipment/Special Equipment----- XG+ cab * Cab air-suspended * Adaptive Cruise Control with FCW and AEBS-3 * Front: 8,00 t, parabolic, 163N * Emission class Euro 6 * OBD-E engine H6, fuel B7 * Automated transmission, TraXon, 12 gears * Wheelbase 4.00 m / rear overhang 0.99 m * Standard component arrangement * Horns, 2 sets * Headlights with height adjustment * LED skylights, additional LED lights, cab roof, pre-wiring * Two LED headlights for cab rear wall * Windshield with sun protection film * Laminated glass with sun protection film * DAF Corner View * Central locking, 3 keys, 2 remote controls * Side fenders, extended. Both sides foldable * Side skirts with extension on upper/lower side * Door panel: Leather * Driver's seat: Xtra Leather Air * Driver's seat, swivel pedestal * Passenger seat: Cinema & table, leather upholstery * Refrigerator and drawer * Mattress with mattress topper for DAF Relax Bed * Curtains with partition curtain * LED interior lighting: Exclusive * Stand-alone air conditioning, integrated * Roller blind, passenger side * Auxiliary power supply: Standard + 2x 40 A * ECAS remote control with extended functions * FMS connector, extended and pre-wired * PACCAR Connect with navigation and tablet software * Digital tachograph, VDO 1C, version G2V2 * Speed limiter set to 90 km/h * DAF Info Exclusive pre-wiring, Exclusive speakers * Antennas: Radio, 2x mobile phone, GNSS Extra: CB * Rear: Air suspension SR1347 * Rear axle 1, 13000 kg, load capacity index 149 * Axle load monitoring * MX-13 engine, 390 kW/530 hp, cab emblem: 530 * ECO performance * 12-speed TraXon transmission 12TX2620 DD, 16.69-1.00 * Rear axle ratio 2.40 * Mechanical differential lock * Compressor 2-cylinder without clutch * EAS unit right, . h. Overh. 85-l-AB fender left * Compressed air tank made of aluminum * 1185-l-Al fuel tanks: 845 stage left + 340 right, H 620 mm * Fuel tanks left and right * Catwalk with step, extra long * One wheel chock * SAF S36-20, cast iron, 150+40mm, low maintenance * Fixed wired body signals and warnings * Fixed control transmission secondary drive, no 1st transmission secondary drive * Generator 150 A, batteries 2 x 210 Ah AGM * Technically permissible GVW chassis weight max 19500 kg * Maximum ambient temperature 45 degrees Fodpey Tgqpofx Al Segh * Garantie Plus vehicle - 3 years - 500,000 km * Extended maintenance interval * Standard tool kit * Standard fuel quantity + 30 liters * Executive package XG/XG+ * Climate package ---- Subject to prior sale and errors. The vehicle description serves only for the general identification of the vehicle and does not constitute a guarantee in the legal sense of purchase. You will receive the exact scope of equipment from our sales staff. Please contact us.

Condition: excellent (used), Year of construction: 2011, operating hours: 1,345 h, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,050 mm, controller manufacturer: Fanuc, overall weight: 21,000 kg, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, x-axis travel 1250 mm y-axis travel 1100 mm z-axis travel 1050 mm spindle speed range 8000 rpm spindle drive motor 30/22 kW pallet size 800 x 800 mm machine weight approx. 21 t machine dimensions approx. 5.0 x 8.0 x 4.0 m distance table / center of spindle 200 (100) - 1350 (1200) mm Torque 600 tool taper 50 SK b-axis Fsdpfjz H A S Dox Al Sogh 0.001 ° table – indexing 90° in 2.5 sec. Control unit CNC Manufacturer of control unit FANUC 31i A

Condition: good (used), Year of construction: 1988, Drilling machine COLGAR Fral 70, serial no. 8709 158 A563, year of manufacture probably 1988, travel ranges XYZ = 8,000 x 2,500 x 1,000 mm, W-axis 1,500 mm, ISO 50, 40-position tool changer, FIDIA control system, tool changer, chip conveyor, indexing head, rotary table, head changer with various auxiliary units. Fgedpez Iccrofx Al Ssh

Condition: excellent (used), For sale: Professional turning and finishing holder with SK40 mounting, ideal for facing, finishing, and rough machining of end and flat surfaces. The high-quality tool steel construction ensures stability, rigidity, and high clamping precision. 📌 Technical data: Fgsdpfx Ajxizb Esl Sjh • Type: Turning and finishing holder with insert • Mounting: SK40 DIN 69871 B • Dimensions: SK40 × 40 × 40 • Head diameter: Ø40 mm • Total length: approx. 60 mm • Condition: Used, very good technical condition – fully functional ✅ Advantages: • High machining accuracy and clamping rigidity • Suitable for use with indexable inserts • Designed for facing, finishing, and rough machining • Compatible with milling machines and machining centers with SK40 mounting

Condition: new, power: 350 kW (475.87 HP), fuel type: electric, axle configuration: 2 axles, color: white, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Options: * CRYSTAL WHITE * DAF Digital Vision System * Laminated glass with sun protection film * Central locking, 3 keys, 2 remote controls * Windshield with sun protection film * External sun visor * Two LED headlights for the rear of the cab * Rear view camera with preparation for 2nd camera * DAF Corner View * High beam assistant * Fixed cab steps * Front chassis version: Aero floor panel * Air-suspended cab * XG+ cab * Headlight beam pattern for right-hand traffic * Headlights without height adjustment * LED skylights * Chrome trim on the front of the cab, side walls: darkened * LED headlights, cornering and fog lights * LED daytime running lights * Side fenders, foldable on both sides * Adjustable roof spoiler, for XG+ cab * Side panel: complete * Chassis color: Black * Roof spoiler color: Crystal White * Side fender color: Crystal White * DDVS housing color: Crystal White * CRYSTAL WHITE * Color of headlight bezel: Crystal White * Color of bumper: Crystal White * Lower cab step: Crystal White Fedpfxoz Hg Dko Al Segh * Color of side panels: Crystal White * Steering wheel, leather * Driver's seat: Xtra Leather Air * Passenger seat: Xtra Leather Air * Door panel: Leather * Cab interior trim: Natura * Passenger seat, swivel pedestal * Mattress with mattress topper for DAF Relax Bed * Curtains with partition curtain * Refrigerator and drawer * Dashboard design: Vision * Auxiliary power supply: Standard + 2x 40 A * LED interior lighting: Exclusive * ECAS remote control with extended functions * Stationary air conditioning, integrated * Color of interior trim: Exclusive * Cab wall paneling: textile * Roof hatch with electric operation * Preparation for air compressor * Driver's seat, fixed pedestal * Upper sleeper bunk * Automatic cab climate control * Safety net for upper sleeper bunk/storage compartment * Armrests on both sides of the driver's seat * Armrests on both sides of the passenger seat * Storage compartment with drawer in the center console * Stationary heater with waste heat pump and timer * Speakers: Exclusive * Predictive Cruise Control * Digital tachograph, VDO version G2V2A * Speed limiter: 90 km/h * PACCAR Connect 10-year subscription * Tachograph calibration * Antennas: Radio, 2x cellular, GNSS, Extra: CB * DAF Truck Navigation * Infotainment including DAF Truck Navigation * Wireless charger * Adaptive Cruise Control with FCW and AEBS-3 * Preparation for toll system * FMS connector, extended and prepared * Driver Performance Assistant * Rear warning system * Lane change warning system * Emergency hammer * Hill start assist * DAF Side and Turn Assist * Electronic Stability Control (VSC) * Speed limit recognition * DAF Drowsiness and Distraction Detection * Main chassis switch * Standard immobilizer * Axle load monitoring * Front leaf suspension: medium * Front: 9,00 t, parabolic, 183N * Front axle 1, 9,000 kg, load index 160 * Rear axle load capacity 13,00 t * Stabilink rear axle suspension * One ride height position, standard height * Rear: Air suspension SR1344 * Rear axle 1, 13000 kg, load index 149 * Front axles: 385/55R22.5 * Alu Alcoa Dura-Bright 32 mm * F1,385/55R22.5GO EQMSU 160/158 L Steering ABA 3P * Wheel trim rings, silver-grey * Goodyear * Tire pressure monitoring system * Driven rear axle(s): 315/70 R22.5 * R1,315/70R22.5GO EQMDU 154/150 L Traction ABB 3P * Urge-to-move * Rear axle ratio 2,38 * Mechanical

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, position of the milling head: Schwenkbar (45°), table diameter: 4,000 mm, total length: 13,300 mm, gear diameter: 5,000 mm, total height: 5,700 mm, total width: 7,500 mm, input frequency: 50 Hz, workpiece diameter (max.): 5,000 mm, type of input current: three-phase, milling length: 600 mm, spindle speed (max.): 125 rpm, spindle speed (min.): 10 rpm, travel distance X-axis: 2,750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 1,750 mm, overall weight: 115,000 kg, distance table to spindle center: 3,300 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, The ZFWZ 5000 originates from Modul's Chemnitz gear machining division and is completely overhauled and delivered with a Siemens Sinumerik ONE control system by Serwema Retrofit Solutions, the company that houses the Modul drawing archive. Proven kinematics, new electrical system, new drives, new safety technology: you get the performance of a new machine at a fraction of the price and with a delivery time of twelve months. Fsdpfx Ajz Etmpjl Sjgh The machine mills external gears, both straight-toothed and helical, up to a module of 40 in hobbing and up to a module of 50 in single-indexing. With the internal milling attachment, internal gears are produced for gear rings of large roller bearings, rotary couplings, and planetary hollow gears, as used in wind power, mining, crane, and shipbuilding technology. Workpieces up to 5000 mm in diameter can be accommodated on the 4000 mm table, the milling head pivots by ±45°, and the 82 kW drive power at the milling head allows for roughing with high chip volume as well as finishing with precision. Technical data: max. workpiece diameter 5000 mm, table diameter 4000 mm, distance from milling spindle axis to table axis 300–1800 mm, distance from milling spindle axis to table surface 550–3300 mm, max. milling cutter diameter 500 mm, max. milling cutter length 600 mm, tangential travel 600 mm, milling cutter speed 10–125 rpm, drive power of milling head 82 kW, swivel angle ±45°. Installation dimensions approx. 13.3 × 7.5 × 5.7 m, weight approx. 115 t. The machine is delivered with a new Siemens Sinumerik ONE control system and Sinamics S120 drives, the latest Siemens generation with full availability of spare parts and support, in an air-conditioned switch cabinet of our own manufacture. The user-friendly interface makes setup and programming possible without in-depth G-code knowledge. The geometry acceptance is carried out according to the manufacturer's standard or DIN, with a protocol, jointly with you in Chemnitz. The scope of delivery also includes a machine safety fence with state-of-the-art safety technology, a new paint finish in RAL 5015/7035, a magnetic chip conveyor, circulation and loss lubrication, a hydraulic unit, a coolant system, and the operating manual.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, CNC Fanuc 18i - MB TRAVELS: X axis: mm 850 Y axis: mm 700 Z axis: mm 750 Distance from spindle center to pallet top: mm 50 - 750 Distance from spindle nose to table center: mm 150 - 900 TABLE: Pallet size: mm 500 x 500 Pallet loading capacity: kg 500 Pallet surface: 24 – M16 x P 2.0 Pallet index degree: deg 1 Fgsdsvw Uyujpfx Al Soh SPINDLE: Max spindle speed: Rpm 14.000 Spindle taper: ISO 40 Max spindle torque (25% ED): Nm 220,5 FEEDRATE: Rapid traverse rate (X, Y, Z): m/min 60 Cutting feedrate: mm/min 30.000 AUTOMATIC TOOL CHANGER: Type of tool shank: MAS403 BT40 Tool storage capacity: 120 Max tool length: mm 400 Max tool weight: kg 10 Method of tool selection: Fixed address Tool change time (tool-to-tool): sec 1 Tool change time (chip-to-chip): sec 3,5 AUTOMATIC PALLET CHANGER: Number of pallet: 7 Type: Rotary shuttle Pallet change time: sec 7,5 Pallet rotation in loading station: deg 90 MOTOR: Spindle motor (30 min): kW 18,5 / 22 Feed motor (X, Y, Z, B): kW 7,0/7,0/7,0/2,7 MACHINE SIZE: Machine height: mm 3.000 Machine dimension: mm 5.600 x 2.700 Machine weight: kg 15.000 Machine equipped with: • High pressure through the spindle 35 bar • Chip conveyor • Instruction manuals and CE declaration

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, CNC Fanuc 180i-TB Fgjdpfx Aox H Nxcjl Soh WORKING CAPACITY Max workable diameter: 680 mm Max workable diameter on X guide: 565 mm Max turning diameter: 324 mm Max turning length: 600 mm SPINDLE Spindle nose diameter (flat flange): 170 h5 mm Spindle bore: 79 mm Max bar diameter: 65 mm Chuck diameter: 200 / 250 mm Drive power 100% ED: 25 kW Speed range: 5,000 rpm Max torque S1 100% ED: 270 Nm Peak speed: 900 rpm C AXIS Speed: 250 rpm Holding torque: 200 Nm Indexing accuracy: 0.025° TOOL TURRET Number of tool stations: 12 Tool holder interface (cylindrical shank) VDI 69880: 40 mm Driven tools speed: 4,500 rpm TAILSTOCK Tailstock stroke: 580 mm Tailstock force: 8 kN Tailstock taper: MK 5 Rapid traverse speed Z2: 6 m/min DIMENSIONS Machine dimensions: 4,350 x 2,460 x 2,080 mm Machine weight: 6,000 kg Machine complete with: No. 10 fixed tool holders Autoblok self-centering chuck Ø 250 mm Losma filtration system Operation and maintenance manuals and CE declaration

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 980 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 8,000 rpm, spindle nose: ISO 50, number of spindles: 240, CNC MSX 701 III Travels (X/Y/Z axes): 900 / 800 / 980 mm Pallet working surface: 630 x 630 mm Pallet load capacity: 1,200 kg High-torque spindle max speed: 8,000 rpm Rapid traverse rate (X, Y, Z): 50 m/min Tool magazine capacity: 240 tools Spindle motor power (30 min / continuous): 37 / 30 kW Machine Configuration: 240-position RACK tool magazine Spindle taper DIN 69871 – ISO 50 Tool breakage detection in magazine Index table with 1° indexing FASTEMS interface, model MLS-MD Spindle speed 8,000 rpm – 37/30 kW TOOL IC SYSTEM BALLUFF interface No. 600 macro variables No. 1 load monitor No. 200 storable programs No. 512 tool life management Fgedpfx Aoykpg Hel Sjh No. 999 tool offsets No. 48 workpiece coordinate systems Data server + ATA card Mori Seiki scraper-type chip conveyor with drum filter MARPOSS application, model MIDA T25G, with E86N radio transmission system META pumping unit, model M 50/50, partial filtration system, 50 bar high pressure COMET drilled pallet Instruction manuals and CE Declaration of Conformity

Condition: ready for operation (used), Year of construction: 1973, functionality: fully functional, machine/vehicle number: 162 026, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, table load: 15,000 kg, TECHNICAL DETAILS Travel range, X-axis: 3,000 mm Travel range, Y-axis: 2,000 mm Travel range, Z-axis: 1,250 mm Travel range, W-axis (spindle stroke): 700 mm Table size: 2,000 × 1,500 mm Table load capacity: 15,000 kg Table rotation: 360° Table indexing: 1° Spindle speed: 8–800 rpm MACHINE DETAILS Position measuring system: Heidenhain linear scales Fsdpfx Asz Ahabjl Ssgh EQUIPMENT Heidenhain linear scales

Condition: used, mileage: 363,000 km, power: 355 kW (482.67 HP), first registration: 10/2022, fuel type: diesel, color: white, gearing type: automatic, number of seats: 2, Equipment: ABS, soot filter, Vehicle number: 263423 ---- ASSISTANCE SYSTEMS * Lane change warning system INTERIOR * Side paneling EXTERIOR * Exterior sun visor OTHER EQUIPMENT * ZF Intarder Additional features * Automated transmission, TraXon, 2 gears * MX-12 engine, 355 kW/483 hp, cab emblem: 480 * Roof hatch with electric operation * Driver's seat: Luxury Air * Co-driver's seat: Comfort Air * Driver's seat, swivel base * Mattress with mattress pad for DAF Relax Bed * Upper bunk * Automatic temperature control and air conditioning * Curtains with partition curtain * Refrigerator and drawer * Middle storage compartment * Dashboard table * LED interior lighting: Luxury * Parking heater with waste heat pump and timer * Wheelbase 4.00m / rear overhang 0.99m * Work lights LED * Fuel tanks left and right Fgsdoz N Rcdopfx Al Sjh * Tail lights with LEDs * EAS unit right, bumper covers right and rear, 85-I-AB fender left * 1195-I-AI fuel tanks: 765 liters left + 430 liters, H 620 mm * Cab color E1980 Crystal White * Technically approved GVW chassis weight max 20500 kg * JOST JSK37C, cast iron, 150 + 12 mm * Electrical connection trailer 24V/2x7 po. Cable: 2x7-pole + EBS * Cab air-suspended * XG cab * Two LED spotlights for cab rear wall * LED skylights * Pneumatic control for parking brake * Axle load monitoring * Front: 8.00t, parabolic, 163 N * Rear: Air suspension SR1344 * Front axle 1, 8,000kg, load index 156 * Rear axle 1, 13,000 kg, load index 149 * Front axle(s): 315/70 R22.5 * Driven rear axle(s): 315/70 R22.5 * Side windows, extended. One side foldable * Adjustable roof spoiler for XG cab * Adaptive Cruise Control with FCW and AEBS-3 * Digital tachograph, VDO 1C, Version G2V1 * Battery energy monitoring * Generator 110 A, battery 2x 210 Ah AGM ---- Subject to prior sale and errors. The vehicle description is for general identification purposes only and does not constitute a warranty in the legal sense. You will receive detailed information about the exact equipment from our sales staff. Please contact us.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 153-06SP0610, compressed air connection: 8 bar, Textile screen printing machine with 10 stations and 6 printing units (Made in Germany), used for only 454,220 prints, and includes 2 x Digiflash Rutland intermediate dryers. The machine is fully functional, in good condition, and can be inspected in operation until the beginning of October. • 10 aluminum sandwich pallets, 420 x 600 mm • 10 aluminum sandwich pallets, 320 x 600 mm • Various squeegees • Power requirements: 3 x 400 V, 50 Hz, 16 A Fjdoztqy Sspfx Al Sogh • Digital microprocessor control • Operation via touchscreen, text display selectable in various languages • Screen holder from the side • Pneumatic screen clamping • Double indexing and ½ indexing • Control panel on each printing arm • Registration accuracy: 0.025 mm • Adjustable cycle speed • Jump setting Optionally, a Rutcure Master 18 drying tunnel can be purchased additionally, with a chamber length of 260 cm, belt width of 105 cm, and 18 KW, manufactured in 2007. Price: 1350 euros (negotiable).

Condition: excellent (used), Year of construction: 2007, Mori Seiki NL2500Y/700 CNC lathe Year: 2007 Control: MORI MSX-850 III Main spindle: Spindle nose: A2-8 Main spindle drive power: 18.5 kW Max. main spindle speed: 4000 rpm Fjdpfx Alsyxppro Ssgh Max. spindle bore: 80 mm Max. turning diameter: 366 mm C-axis 0.001 degree TURRET: Number of positions: 12 pcs. Number of driven tools positions: 12 pcs. Min. spindle indexing increment 0.001° Travel X/Z axis: 280 / 785 mm Travel Y axis: +/- 50 mm Max. speed driven tools: 6000 rpm Power driven tools: 5.5 kW TAILSTOCK: Taper: MT5 Distance between centers: 705 mm ELECTRICAL SUPPLY: Total drive: 39 kVA WEIGHT AND DIMENSIONS: Space requirements: 3800 x 2143 mm Machine height: 2232 mm Machine weight: 6100 kg Accessories/options: - 2 cabinet accessories - 5 pieces driven tool holders, several static holders - collets, inserts, tools, sleeves, etc.... - high pressure paper band filter type, micro filtered, coolant tank - swarf conveyor - collet type chucks, different sizes - Kitagawa 3-jaw hydraulic chuck diameter 210 mm - Full set of documentations - Parts catcher Under power in our warehouse. Video available upon request!

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Features and technical data: 2-jaw drill chuck up to 20 mm shank diameter Pneumatic positioning adjustment on 2 levels 0-100 mm Max. drilling depth: 150 mm Precision indexing rail 12 mm Center locking and cross adjustment 2 pneumatic safety clamping cylinders Motor 1.5 kW Speed: 2800 rpm Long hole drilling device, lowerable, with 2 program cams Machine weight approx. 310 kg Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop) Fgedpfxew I Uy Tj Al Soh Availability: short-term Location: Röllbach

Condition: used, Year of construction: 2004, Technical details turning diameter 210 mm turning length 700 mm control Okuma OSP-E 100 L total power requirement 35,7 kVA weight of the machine ca. 7,1 t dimensions of the machine ca. 2660 x 2000 x 2330* mm Additional information CNC turning and milling center with C-axis and Y-axis, 2 turrets, and subspindle. CNC control: Okuma OSP-E 100 L Maximum turning diameter: 210 mm Swing over bed: 400 mm Distance between spindle noses: 960 mm Main spindle: Spindle bore: 53 mm Speed range: 50 to 6000 rpm Motor power: 11/7.5 kW Subspindle: Spindle nose: JIS A2-6 Speed range: 38 to 5000 rpm Motor power: 11/7.5 kW Z-axis: Travel: 700 / 700 mm (ZA + ZB) Rapid traverse: 40000 mm/min W-axis: Travel: 940 mm Rapid traverse: 40000 mm/min X-axis: Travel: 167 / 192 mm (XA + XB) Rapid traverse: 30000 mm/min Y-axis: Travel: 92 mm (+50/-42 mm) Rapid traverse: 15000 mm/min C-axis: Indexing: 360 x 0.001 deg. Rapid traverse: 400 rpm Disc turret: Fgsdpfx Aezzwmuel Seh 2 x 12 stations Tool holder mount: VDI 30 mm Power of driven tools: 4 kW Total connected load: 35.7 kVA Machine weight: 7100 kg Machine dimensions: 2660 x 2000 x 2330 mm* Plus swarf conveyor and bar loader Accessories FMB Turbo 5-42/6200/A bar loader, year of manufacture 2005 Chip conveyor Coolant system Collet chuck for main and subspindle Both turrets equipped with tool holders Machine documentation.

Condition: good (used), Year of construction: 2000, Punch press Manufacturer: EHT Type: Strippit 1500/30 Fgjdpfx Aleul S Eaj Seh Year of manufacture: 2000 CNC control: Fanuc Working area without repositioning: 2500 x 1500 mm Maximum material thickness: 8 mm Punching force: 30 tons Turret with 46 tool stations, including 4 indexing stations, size D 3 programmable clamps Metal table Used exclusively in single-shift operation Includes tools from WILSON TOOL 51026

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Fsdpfjr Hr Arex Al Sjgh Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: new, diameter -- mm workpiece length -- mm work piece width 0 - 3 mm speeds 3600 U/min range of angles 30 - 60 (stufenlos) ° weight of the machine ca. 31 kg dimensions of the machine ca. 530 x 420 x 410 mm Maximum bevel width of 3 mm - Mechanically adjustable bevel angle Fedpfxeppgcrs Al Sjgh Designed for deburring and chamfering steel parts and workpieces. Processing of different materials. Solid and stable machine construction. * Scale for setting the processing depth * Security cover * Adjustable processing angle * For steel, stainless steel, aluminum and other materials * Precise, massive and overlong mechanical guide - Number of indexable inserts: 5 pieces (four-sided) - Feed: manual

Condition: new, saw blade diameter 600 x 30 mm capacity 90 degrees: round 215 mm capacity 90 degrees: square 195 x 195 mm capacity 90 degrees: flat 140 x 395 mm capacity 45 degrees: round 170 mm capacity 45 degrees: square 170 x 170 mm capacity 45 degrees: flat 100 x 175 mm turning speeds 2800 U/min total power requirement 3.0 kW weight of the machine ca. 310 kg range L-W-H 1077 x 1214 x 1558 mm Fodpfoxaccfjx Al Sjgh Features: - Semi-automatic high-performance circular saw (underfloor) * For cuts from 0° to 180° right and left * In aluminum and light metal alloys * With rising saw blade * With extremely large cutting range (saw blade diameter 600 mm) * Digital display for angle adjustment from 0° to 180° - Manually opening safety cover - Hydro-pneumatic saw blade feed (via two-hand operation) - 2 pneumatic vertical vices with quick adjustment - Heavy-duty cast iron construction ensures vibration-free . . operation and maximum precision - Large bearing-mounted turntable with internal indexing at 0/45° * Ensures quick adjustment for miter cuts - Extractor nozzle for connecting a chip extraction system - Pneumatic spray system for cooling and lubricating the saw blade - Machine base frame - Powerful saw drive with 3-phase 3HP motor Included in delivery: - 1x carbide saw blade ø 600 mm - Blow-out gun - Full protective cover - Tool set - Detailed operating instructions, maintenance manual, etc.