Used Johnford Gt-80D-2S for sale (2,272)

Condition: used, mileage: 467,100 km, power: 260 kW (353.50 HP), first registration: 01/2016, fuel type: diesel, number of seats: 60, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, parking heater, * Our internal number: 1168 * S 516 MD * Retarder * French inspection certificate is available. * Currently fitted with 58 seats (no reclining seats) --> therefore, the number of seats can be increased. * An additional row of seats is included separately, allowing for 60 seats. * The following repairs were carried out at EVOBUS in June 2026: * Retarder replaced * Retarder control unit replaced * Exhaust gas recirculation valve replaced * Haldex separator replaced * 2 x V-belts replaced * Air reservoir with drain replaced * Oil separator replaced * Cost: 8,500 EUR / net * In July 2026: Air conditioning service performed * Side matrix (without control unit) * Interior route display * Seats can be adjusted to face backwards * LIFT * Lifting mechanism - trunk lid on the right side * Storage compartments * Convector heater * Auxiliary heater * Air conditioning * Rear entrance * No toilet, no refrigerator. * Wheelchair-accessible bus * The customer is obliged to independently verify the condition and equipment of the goods/vehicle! * etc. Crjdexwr Apepfx Aamjf * Vehicle may be in operation / mileage and condition may vary. * All information is subject to change without notice. * We reserve the right to sell the vehicle in the meantime. * We refer to our general terms and conditions.

Condition: new, functionality: fully functional, empty load weight: 587 kg, maximum load weight: 2,113 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 403 mm, loading space width: 2,055 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, MARTZ GT 400/2 2.7T NEW VEHICLE Internal dimensions: 403cm x 205cm Total weight: 2700kg Payload: 2113kg Braked tandem axle trailer Overrun brake and handbrake from KNOTT 2x 1350kg axles and brakes with automatic reversing function Curved loading platform Bolted, hot-dip galvanized steel frame Steel ramps in the rail channel Numerous lashing points along the entire length Reinforced 14-inch tires M+S tires 13-pin connector Side marker lights at the front Rear lights with reversing light, NSL (no stopping lane), and triangular reflectors Winch with brake and bracket 2x wheel chocks Perforated steel running boards 2x wheel stops OPTIONAL ACCESSORIES – PERMANENTLY REDUCED PRICES FROM FEBRUARY 2026 - Equipment for 100 km/h (shock absorbers) - Rear supports - Spare wheel with bracket - Complete LED lighting - Anti-theft device - Replacement of steel rail with aluminum rail - Replacement of 10" tires with 13" tires - Wheel stops - Folding crank rear supports - Anti-sway coupling - Wheel stops across the entire width Further accessories available upon request! Crodpfx Aaezl Anrjmof Plus freight to Gera and vehicle registration document 250 € net. Images are for illustrative purposes and may show optional accessories at an extra cost. Have you not yet found the right trailer? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repairs, also for caravans. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. We also offer a wide selection of rental trailers. Visit us online or come by directly!

Condition: used, mileage: 880,264 km, power: 315 kW (428.28 HP), first registration: 08/2010, fuel type: diesel, number of seats: 50, gearing type: automatic, emission class: euro5, color: grey, brakes: retarder, Year of construction: 2010, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), fog lights, power assisted steering, = Additional options and accessories = - Autoradio - CD - Climate control - Coffee-machine - Double glazing - DVD - EBS - Electrically operated mirrors - GPS navigation - Heater - Hydraulic power steering - Individual air cooling - Individual lighting - Kitchen - Refrigerator - Reverse camera - Sun visor - Tachograph - TV/Video Csdpfxoy Hu E Is Aamsrf = More information = Engine capacity: 11.967 cc Dimensions (LxBxH): 1302 x 365 x 255 cm Make of engine: Mercedes Benz Tyre tread remainder on axle 1: 80%

Condition: used, mileage: 747,000 km, power: 315 kW (428.28 HP), first registration: 03/2010, fuel type: diesel, number of seats: 47, gearing type: mechanical, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), onboard kitchen, soot filter, 47 passenger seats, 2 tour guide seats, 18 standing places Armrests for passenger seats Mounts for ski racks Onboard kitchen Ventilation nozzles 2 flat-screen monitors Footrests for passenger seats Luggage racks in the passenger compartment Hostess call system Folding tables for passenger seats Automatic climate control Refrigerator at the front Reading lights Microphone for the driver Radio with CD player Crodpfx Aszl Idljamjf Tour guide seat Tour guide cabinet Retarder Tinted side windows Heated driver's seat Cruise control Safe Curtains WC/CC switchable Central locking

Condition: used, functionality: unexamined, Ferwood Code: RU0011864 - Manufacturer Code: SP075S-MF1-10-1C1-2S - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer a refurbishment service. Please contact us. 3.5KG 20X20X20 Credpfx Aaoymd Auomef

Condition: used, functionality: unexamined, Ferwood Code: RU0011869 - Manufacturer Code: SP075S-MF2-20-1C1-2S - Condition: Used - Functionality: Not tested - Compatible machine: - If interested, we offer a refurbishment service, please contact us. 4KG 36X26X21 Cedpoymd Iwofx Aamjrf

Condition: used, Year of construction: 2016, Lifting capacity: 200 kg Crodpfx Aaozflywsmof Please contact Gebrauchtgeräte Center for more information

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 173180025, empty load weight: 975 kg, working height: 50 mm, working width: 3,000 mm, working length: 3,000 mm, Equipment: CE marking, TECHNICAL DETAILS Working area, X-axis: 3,000 mm Working area, Y-axis: 3,000 mm Working area, Z-axis: 50 mm Horizontal drilling spindles: 4 MACHINE DETAILS Power of main motor: 3 kW Voltage: 400 V Current consumption: 3 A Dimensions & Weight Cedpfx Aasy Tu Uiemorf Dimensions (L x W x H): 1,750 x 1,800 x 1,800 mm Net weight: 975 kg Transport packages: 1 EQUIPMENT CE marking Horizontal drilling machine Vertical drilling machine Saw unit included

Condition: excellent (used), functionality: fully functional, 1 x Thread-drilling machine Steinel BT 6.52 with coolant system + small vise Technical specifications: Max. thread size: M 6 (further technical specifications see photos) The machine can be inspected while powered on. Codpfx Aaozk Iyqjmsrf

Condition: good (used), loading space length: 6,200 mm, loading space width: 1,640 mm, loading space height: 2,050 mm, color: red, Year of construction: 2020, operating hours: 370 h, General information Field of application: Construction Drivetrain Type of fuel: Hybrid Weights Empty weight: 1.950 kg Functional Mast: articulated arm Lifting capacity: 220 kg Lift height: 1.360 cm Working height: 1.560 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information TÜV Marked: yes Reconditioned: Yes Delivery terms: EXW Max. horizontal reach: 810 m Max swing of platform in degrees: 355 Latest inspection: 2026-07-17 Production country: HU Additional information Please contact Rothlehner Arbeitsbühnen GmbH for more information Crsdozmlt Tspfx Aamef

Year of construction: 2014, condition: good (used), Machine details Manufacturer: CARTES Model: GT 363 HSD Year: 2014 Machine type: Label finishing / embellishment / converting machine Cedpfjzkavdsx Aamjrf Maximum material width: 360 mm Maximum print / working format: 340 x 320 mm Maximum speed: up to 15,000 cycles/hour Machine layout dimensions: approx. 8,288 mm length x 1,628 mm width/depth x 2,148 mm height Status: Machine is still in production until approx. the end of the year Reason for sale: Replacement by a faster machine _____ Configuration The machine is equipped with the following units: • Unwinder • Corona pretreatment • Flat hot foil stamping unit • 2 x transverse flat hot foil units • 1 x longitudinal foil guide • Foil unwinding 1” • Foil rewinding 3” • Flat screen printing unit • UV-Ray UV curing unit • Flat die-cutting unit • Matrix rewinding, 3” / 76 mm core • Edge trimming knives • Backside slitting / backside scoring • Razor blades for longitudinal slitting • 2 x rewinding shafts, 3” _____ Accessories included • 2nd plate for hot foil stamping • 2 plates for embossing / relief stamping _____ Service and condition The machine is currently still in operation and is reported to be in good working condition. A technical service was carried out by a Dortschy technician in October 2024. FGT condition rating: 8/10 ★★★★★☆☆ This rating is based on the year of manufacture, the current production status, the recent service and the overall configuration of the machine. Final condition remains subject to inspection, technical confirmation and video review. _____ Main advantages • Attractive price compared to the original new price of approx. EUR 244,500 • Strong configuration for premium label finishing • Hot foil stamping and embossing capability • Flat screen printing unit for special effects and high-value applications • UV curing system included • Flat die-cutting unit included • Matrix removal, slitting and rewinding included • Still in production • Recent service in October 2024 • Compact and complete finishing solution for label converters

Condition: used, Year of construction: 2002, Technical details: grinding length: 1500 mm grinding width: 700 mm workpiece height: 580 mm table load capacity: 2380 kp table speed -stepless-: 5 - 35 m/min grinding wheel dia. x width: 500 x 100 x 203 mm grinding wheel motor: 18 kW speeds:: stufenlos elektronisch total power requirement: 35 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 5,3 x 2,9 x 3,8 (3,18) m surface grinding machine, Cedpfjq Sbh Uox Aamerf paper-filter, DRO 3 axis, automatic infeed, dwheel, full cabin *

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Wire EDM machine type Agiecut Classic 2s, year of manufacture 2004, for sale. Crjdpfx Ajy Snm Noamof The machine is in good condition and operates flawlessly. An inspection under power is gladly possible. A video is also available upon request. Technical machine data: Agiecut Classic 2S • Manufacturer: AGIE SA, CH-6616 Losone (Made in Switzerland) • Model / Type: AGIECUT CLASSIC 2S • Year of manufacture: 2004 (with CE marking) • Serial number (unit): 663 • Equipment list No.: C32.102 • Circuit diagram No.: 629.412 Electrical connection values & performance • Voltage: 3 x 400 V • Frequency: 50 Hz • Power: 9 kVA • Rated current: 14 A • Short-circuit current: 10K Weight & components • Total weight: 2,580 kg • Subcomponents (serial numbers): o MC 2S CLASSIC (unit): Serial 663 / Equipment List 002.354 o DA CLASSIC 2S: Serial 659 / Equipment List 033.804 o CABINET CLASSIC 2S (control cabinet): Serial 665 / Equipment List 028.254 Loading can be arranged by us upon agreement. If you have any questions, please feel free to contact us at any time.

Condition: good (used), Year of construction: 1993, Year: 1993 Consisting of: Gathering machine Müller Martini 210 S Description: - Chain tensioning station - Number of gathering stations: 18 - Pump - Set up element - Intermediate element with vibrating Side stitching unit - Transfer into the binder Cjdpszg Hdyofx Aamorf Perfect binder Müller Martini Normbinder Description: - 20 clamps - Main milling station - 1st spine preparation station - Excluding dust extraction system - Base for 1st spine glue system - hotmelt spine glue unit, interchangeable - Premelter for spine glue unit - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit - SF Stream cover feeder - Scoring station - Pump - SF Nipping and pressing station - Lay down device Transport system - Escape delivery Three knife trimmer Müller Martini Zenith S (3672) Description: - Semi automatic setting - Right hand infeed - Precounter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4 – 17 Option not in price included - Stream feeders - book bloc feeder - Gauzing station - Palletizer

Condition: used, Year of construction: 2014, Lifting capacity: 250 kg Please contact Gebrauchtgeräte Center for more information Credpfx Aajzflp Ejmef

Condition: used, maximum load weight: 600 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 04/2025, loading space length: 2,500 mm, loading space width: 1,260 mm, loading space height: 300 mm, total width: 1,710 mm, total height: 790 mm, The box trailer consists of a sturdy aluminium construction with a wear-resistant wooden floor. Cedpoy A A Snefx Aamorf Errors and prior sale excepted.

Condition: used, mileage: 160,847 km, power: 162 kW (220.26 HP), first registration: 02/2016, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 2 axles, color: yellow, gearing type: automatic, emission class: euro6, Equipment: ABS, crane, soot filter, Renault D14 220 3Skipper + Effer 65 2S crane Suspension: leaf-leaf Wheelbase: 3.75 m Effer crane Type: 65 2S 3x hydraulic extension 2x stabiliser points We are also happy to assist you with financing/leasing options through our partners. Crodpfxeyyrq Ie Aamjf All information without guarantee. Subject to errors and prior sale.

Condition: used, Year of construction: 2018, total height: 1,800 mm, total length: 1,750 mm, total width: 1,800 mm, Colour: Grey Empty weight: 975 kg - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 173180025 - Main motor power [kW]: 3 - Working range X [mm]: 3000 - Working range Y [mm]: 3000 - Working range Z [mm]: 50 - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 4 - Vertical drilling unit: Yes - Saw unit present: Yes - Voltage [V]: 400 Credpfx Aaeyf Hc Ijmef - Current consumption [A]: 3 - Transport dimensions: 1750mm x 1800mm x 1800mm (l x w x h) - Transport weight [kg]: 975kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), Code: 0423 Brand: ME.SA - ITALY Model: GT 60 S - CE Standard Chain and locks mortising machine with bits and cutters for joinery, wooden joinery, doors, furniture and various – CE Standard Technical data: Max mortise length 250 mm Head transverse stroke mm 100 Head rotation +/- 45° Vertical stroke of upright bracket 250 mm Vertical rotation of upright bracket +/- 45° Max window/door frame height 1000 mm Chain motor 3 Hp Vertical spindle motor 2 Hp Min/max horizontal spindle centre distance 50/130 mm Overall dimensions mm 850 x 900 x 1900 h Codpfxozgt Ede Aamerf Weight kg 390

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Classic 2S Year of manufacture: 2004 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm Travel distances U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in the bath) / 450 (without the bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Includes AGIEJOGGER handbox for convenient setup AGIE IPG generator AGIEVISION control Dimensions (length x width x height): 1640 x 2040 x 2220 mm Cedpfjzcaxkox Aamjrf Net weight: 2580 kg After receiving your order, our machines are cleaned and fully overhauled. Subsequently, a test cut is performed to achieve the best possible surface finish for acceptance. You will receive a 6-month warranty on the machine. We would be happy to offer on-site commissioning and training.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, AGIECUT Classic 2S Year of manufacture 2001 Travel paths: X= 350 mm, Y= 250 mm, Z= 256 mm Travel paths U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Crodpfxev Dkvrj Aamsf Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achieveable surface quality: Ra: 0.30 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient setup AGIE HSS-C generator AGIEVISION control Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after we receive the order. A test cut is then carried out with the best surface for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Condition: used, axle configuration: 3 axles, first registration: 07/2020, loading space length: 5,750 mm, loading space width: 2,150 mm, loading space height: 900 mm, wheelbase: 1,000 mm, gearing type: other, driver cabin: other, brakes: other, * German trailer * 1st owner * Condition as shown in photos * Special trailer with tridem axle and split loading platform * Front body with mesh extension, electrically tiltable on both sides * Behind that: flatbed/platform/low-loader with access ramps * Large loading area with phenolic plywood floor and DIN lashing rings * Ideal for landscaping, construction industry, and much more * Loading platform dimensions: 3.75 m x 2.15 m x 0.35 m, aluminum sideboards * Payload: 2,230 kg * Tipper area: 2.00 m x 2.15 m x 0.90 m * Electric tipping mechanism with cable remote control * Road approval for 100 km/h Cjdpfxoxnqv Aj Aamjrf * Tip floor with steel base * Tridem axles * Gross vehicle weight: 3,500 kg * Curb weight: 1,270 kg * Payload: 2,230 kg If a new TÜV inspection (MOT) is desired, we are happy to provide an offer through our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV certification, without new SP, and without new UVV. More trucks can be found on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and expressly recommend viewing and inspecting the goods to avoid misconceptions regarding condition and suitability. Viewings and inspections are possible at any time by prior arrangement and are expressly encouraged. All information is provided without guarantee. No liability is accepted for errors or incorrect information in this offer. The buyer is obliged to independently verify the condition and features of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: used, Year of construction: 1997, - Printing process: 6-colour UV letterpress - Maximum material width: 300 mm - Maximum print width: 280 mm - Maximum print length (repeat length): 280 x 240 mm - Maximum speed: 7,200 prints per hour - UV curing: 6 GEW UV dryers - Die cutting: 1 rotary die-cutting station Crsdpfx Aajwv D Uwsmjf - Rewinder: Integrated with slitting function (5 knives) - Unwinder: With end position sensor - Additional equipment: - Rotometrics print control at the die-cutting station - Metal-backed polymer printing plates - 11 magnetic print cylinders

Condition: used, Year of construction: 2005, - Printing process: 6-colour UV letterpress - Maximum material width: 300 mm - Maximum print width: 280 mm - Maximum print length (repeat length): 280 x 240 mm - Maximum speed: 7,200 prints per hour - UV curing: 6 GEW UV dryers - Die cutting: 1 rotary die-cutting station - Rewinder: Integrated with slitting function (5 knives) - Unwinder: With end position sensor - Additional equipment: - Rotometrics print control at the die-cutting station Codpfjwv D U Dox Aamsrf - Metal-backed polymer printing plates - 11 magnetic print cylinders

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2,896 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 580 mm, total height: 1,700 mm, total width: 1,628 mm, overall weight: 3,600 kg, controller manufacturer: FANUC, controller model: i-series, product length (max.): 2,834 mm, number of axes: 3, This 3-axis DOOSAN Puma GT 2100M was manufactured in 2017. It features a maximum turning diameter of 300 mm and a turning length of 513 mm. The machine is equipped with 12 tool stations and offers rapid traverse speeds of 24 m/min in the X-axis and 30 m/min in the Z-axis. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 2100M horizontal turning machine we have for sale. Contact us for further details. • Swing over bed: 600 mm • Swing over saddle: 390 mm • Recommended turning diameter: 210 mm • Max. turning diameter: 300 mm • Max. turning length: 513 mm • Bar working diameter: 65 mm Csdpfey Tx S Ssx Aamorf • Spindle nose: ASA A2-6 • Spindle bearing diameter (front): 110 mm • Spindle through-hole diameter: 76 mm • Minimum spindle indexing angle (C-axis): 0.001° • Number of tool stations: 12 • OD tool size: 25 mm • Boring bar diameter: 40 mm • Indexing time (1st swivel time): 0.15 s • Rotary tool spindle speed: 5,000 rpm • Rapid traverse (X-axis): 24 m/min • Rapid traverse (Z-axis): 30 m/min • Quill diameter: 80 mm • Quill bore taper (live): MT4 • Quill travel: 80 mm • Electric power supply: 30.43 kVA Additional equipment • None specified (no robots, automation or bar feeder listed) • Tools excluded; available at additional cost Technical Specification Driven Tools Yes Counter Spindle No