Used Krause 140Cm / 72Cm for sale (121)

Year of construction: 1996, condition: good (used), Make:KRAUSS-MAFFEI Description: used type: KMD-2-50-KK output capacity: max. approx. 140-180 kg/h for H-PVC pipes, depending on material and product this can vary year of construction:1996 Screw diameter:50-103 mm (conical) Screw length:1300 mm Screw speed: max. 43 m/min. Podpoh Nmt Dofx Am Tjgp Drive motor: DC motor 25 kW Cylinder heating/cooling zones: 4/3 (oil cooling) inlet piece heating zone: 1 tool heating zones: 5 Equipment: dosing unit with hopper, vacuum pump for barrel degassing, barrel cooling unit, screw tempering unit Gearbox, was installed at 53,000 hrs. Overhauled worms and the cylinder Note: current running time is 62,590 hrs. Good Second hand functional

Condition: excellent (used), Year of construction: 2013, Equipment: documentation/manual, Machine KraussMaffei KM650-4300 GX Clamping force kN: 6500 Clearance between tie bars ( h x v ) mm: 1110 x 960 Mould opening stroke mm: 1450 Mould height min. mm: 450 Mould height may. mm: 1000 Ejector stroke mm: 250 Screw diameter mm: 90 (mixing HPS-M) L/D ratio: 20 Injection pressure bar: 1839 Stroke volume cm3: 2290 Control version: MC5 Screen text: Germany Condition: Checked, ready to work Equipment: \- Anti-vibration levelling pads \- BluePower - Servo pump drive for lower energy consumption \- Wear resistant plasticizer, surcharge \- BluePower - Complete insulation of plasticizing cylinder for lower energy consumption \- 2 x pneumatic valve on moving platen for blow function \- 2 x pneumatic valve on fixed platen for blow function \- Pneumatic cascade control, 4-fold for hotrunner Pjdpfxjy Apdqs Am Tjgp \- Hydraulic cascade control, 4-fold for hotrunner \- Conveyor control \- Mechanical robot interface according to EUROMAP 18 \- Hydr. actuated ejector plate including tapped holes and clearance holes in the moving platen for ejector bolts \- Hydraulic core pull system 2-fold on moving platen \- Hydraulic core pull system 2-fold on fixed platen \- Pneumatic core pull system 1-fold on moving platen \- Pneumatic core pull system 1-fold on fixed platen \- Pressure relief for hydraulic core pulls \- Pressure relief for hydraulic cascade valves \- 20 hotrunner control circuits \- Combination of sockets (3 Sockets, single phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) \- Potential-free contact for signal "plasticizing" on socket HAN 3 A \- Switch over to holding pressure depending on cavity pressure (Kistler) \- Quality statistics \- Chip card reading unit \- Graph display and analysis package with 10 graphs \- Trend graphics \- PV-closed loop control \- Interface for production data consisting of 5 potential free contacts inside the control cabinet \- 3 free programmable in- and outputs in the control cabinet: KraussMaffei Linear Robot LRX 350: \- Fully integrated control \- Horizontal stroke: 4000 mm \- Vertical stroke (telescopic): 2000 mm \- Demolding stroke: 1200 mm \- Maximum payload: 35 kg

Condition: reconditioned (used), We have several Krauss-Maffei MC3 control units that have been tested and are in good working order. Podpfx Aet Uzbpom Tjgp

Condition: good (used), Krauss-Maffei injection unit 220 (complete) with electric screw drive. Screw diameter: 40 mm. Podpfx Amsfwcrnj Tegp

Condition: ready for operation (used), Year of construction: 2001, Used injection molding machine directly from the manufacturer! We as manufacturer KraussMaffei offer here one of our used injection molding machines. CONTROL - MC4 TECHNICAL DATA CLAMPING UNIT - injection force: kN 8000 - distance between columns (h x v): mm 1120 x 1000 - distance of mold opening max: mm 1400 - mold installation height min/max: mm 600/1100 - opening stroke of the clamping platen: mm 2000 - Ejector stroke: mm 250 - Ejector force: kN 226 ( Backward: 59 ) SCREW UNIT - Screw diameter: mm 95 - Ratio Ls/D: 23 - Injection pressure: bar 1795 - Injection volume: cm3 3367 - Injection size for PS: g 3064 - Injection capacity: cm3/s 690 - Closing force of the nozzle: kN 166 ELECTRICAL PARAMETERS - capacity of pump motor: kW 90 - heating power: kW 61 WEIGHT AND DIMENSIONS - net weight: t 45 Podjnh Rwgopfx Am Tegp - dimensions of the machine (L x W x H): m 10,4 x 2,86 x 2,39 Basically, we deliver this machine in a functioning basic condition. In addition, we as the manufacturer of these systems can offer various add-ons depending on the individual case, such as: - Possible control updates to extend the lifetime of the plant - Updates for energy optimization of the machine - Possible connection to digital products from KraussMaffei - Plasticizing conversions - Optional: Organization and arranging of delivery (Not included in the price) - Optional: Installation and commissioning (not included in the price) You will receive from us first-class service as well as the possibility to purchase immediately desired spare parts packages of wear parts in order to ensure a continuous production of your new used machine. Do not hesitate and ask us right away!

Condition: reconditioned (used), Year of construction: 2015, Used injection molding machine directly from the manufacturer! We as manufacturer KraussMaffei offer here one of our used injection molding machines. CONTROL - MC4 Pgodjnh Rnujpfx Am Top TECHNICAL DATA CLAMPING UNIT - injection force: kN 5000 - distance between columns (h x v): mm 900 x 800 - distance of mold opening max: mm 1170 - mold installation height min: mm 480 - opening stroke of the clamping platen: mm 1650 - Ejector stroke: mm 250 - Ejector force: kN 95 ( Backward: 48 ) SCREW UNIT - Screw diameter: mm 90 - Ratio Ls/D: 20 - Injection pressure: bar 1742 - Injection volume: cm3 1953 - Injection size for PS: g 1777 - Injection capacity: cm3/s 649 - Closing force of the nozzle: kN 115 ELECTRICAL PARAMETERS - capacity of pump motor: kW 90 - heating power: kW 44 WEIGHT AND DIMENSIONS - net weight: t 25,8 - dimensions of the machine (L x W x H): m 7,65 x 2,33 x 2,55 Basically, we deliver this machine in a functioning basic condition. In addition, we as the manufacturer of these systems can offer various add-ons depending on the individual case, such as: - Updates for energy optimization of the machine - Possible connection to digital products from KraussMaffei - Plasticizing conversions - Optional: Organization and arranging of delivery (Not included in the price) - Optional: Installation and commissioning (not included in the price) You will receive from us first-class service as well as the possibility to purchase immediately desired spare parts packages of wear parts in order to ensure a continuous production of your new used machine. Do not hesitate and ask us right away!

Year of construction: 2020, condition: new, Krauss Maffei Touch panel the newest version for MC5/ MC6 Spare parts width- Pgedpeqvuicefx Am Tjp 37 cm height-47cm length-8cm

Condition: used, Krauss Maffei Motherboard Pgedpfxeu Axiho Am Tsp

Condition: new, It is new spare parts never used. Pgsdpfxeygucfj Am Tep Krauss Maffei MC 5 display M5V121 new never used Was bought for Krauss Maffei 2300 ton machine. M5-Anzeigeeinheit 12Z LxWxH 310x 360x60 mm 3600 g

Condition: used, Year of construction: 2003, clamping force: 1,500 kN, Equipment: documentation/manual, Injection Moulding Machine KM 150-700/C2 Clamping Unit 1. Clamping force: 1500 kN 2. Platen size (h × v): 780 × 790 mm 3. Tool opening stroke: 600 mm 4. Clearance between tie bars (h × v): 500 × 500 mm 5. Minimum mould installation height: 300 mm 6. Ejector stroke: 150 mm 7. Hot runner – number of zones used: 12 8. Control of pneumatic valve pins: 1 pc Psdpfx Aeyfm Ahom Tegp Injection Unit 1. Screw diameter: 45 mm 2. Injection pressure: 2336 bar 3. Maximum shot volume: 305 cm³ 4. Maximum shot weight (PS): 278 g 5. Cores: 2× hydraulic circuit (BAP) 6. Screw L/D ratio: 22

Condition: good (used), Year of construction: 2004, Working hours : 21.447 h Clamping force: 125 tons Tie-bar spacing (horizontal × vertical): 470 mm × 470 mm Psdjxqx Avjpfx Am Togp Platen size (mould plate) approx: 745 mm × 770 mm Minimum mould height (installation height): approx 300 mm Mould opening (stroke): 600 mm Maximum daylight between plates: approx 900 mm Screw diameter: 40 mm Injection volume: ~ 204 cm³ (≈185 g PS) in one similar spec sheet Motor power / drive: 18.5 kW drive power (pump drive) Heating power: around 11 kW

Condition: good (used), • MAFO barrel washer.. • Total dimensions : • Length : 721cm. • Width : 140cm. • Height : 230cm. • Opening : • Width : 60cm. • Heigth : 74cm. • Inlet conveyor: • Length : 200cm. Pedpjd Ixw Usfx Am Togp • Width : 200cm. • INDAUK.

Condition: excellent (used), Year of construction: 2008, power: 7.5 kW (10.20 HP), roller diameter: 410 mm, Equipment: CE marking, Behringer HBP 413 A, manufactured in 2008, very little use, original paint, major inspection completed, etc. – everything has been done. Podpfxjzkq Ude Am Tegp

Condition: new, Year of construction: 2025, functionality: fully functional, BEHRINGER HBE 411 A Dynamic, BRAND NEW MACHINE! Cut monitoring 22 AFC-Pro 33 Saw drive 5.2kW 50-2 Chip conveyor 100 Bar start detection 535 Pgjdjzixylopfx Am Tjp Lighting Behringer new machines: Come-See-Buy Immediately available from stock Warranty from date of purchase Machine breakdown? Replacement in the shortest possible time Delivery and setup available on request Immediately available from stock

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 410 mm, BEHRINGER HBE 411 A Dynamic, BRAND NEW MACHINE! manual positioning 18 cut monitoring 22 saw drive 5.2 kW 50-2 chip conveyor 100 5 Micro 250 bundle clamping device 440 bar start detection 535 retraction cylinder 550 clamping pressure regulation 832 line laser 940 lighting 941 cutting channel extension Behringer New Machines: Come-See-Buy Available immediately from stock Pgjdozixx Ijpfx Am Tep Warranty from date of purchase Machine downtime? Fast exchange available Delivery and installation on request Available immediately from stock

Condition: excellent (used), Year of construction: 2016, cutting height (max.): 560 mm, cutting width (max.): 560 mm, Equipment: CE marking, Available from mid-July in stock. KAST=win A 5.6, year of manufacture 2011. Podpfx Amozhtv Ee Tjgp

Condition: excellent (used), Year of construction: 2011, Behringer Eisele HCS 160 MF including sorting and feed magazine, air filtration system, and much more. The machine will arrive at the end of August and will then be refurbished. The photos show the original condition. Pgodpfozhki Asx Am Top

Condition: new, Year of construction: 2022, You have a Behringer saw and your control panel is defective, the membrane keypad is broken, but the machine is still too good to replace. The BT 41 is a very common control panel and we can repair it for you! Please contact us. Pgedpfxetv Ip Io Am Tjp

Year of construction: 2024, condition: new, We sell chip brushes for the common machine types for Behringer and Kasto sawing machines. Minimum order quantity 20 pieces. We are happy to answer your inquiries. Podpfotp T N Uex Am Tjgp

Year of construction: 2024, condition: new, We sell chip brushes for the common machine types for Behringer and Kasto sawing machines. Pgedpfx Aoww Dgism Tep Minimum order quantity 20 pieces. We are happy to answer your inquiries.

Year of construction: 2024, condition: new, We sell chip brushes for the common machine types for Behringer and Kasto sawing machines. Minimum order quantity 20 pieces. We are happy to answer your inquiries. Pgodpfx Amsv Uau Sj Tep

Condition: excellent (used), Here we offer you a TPS Blue-M temperature convection oven. TPS Blue-M temperature convection oven Blue M 7780 specifications Temperature range: 15 °C above ambient temperature up to 704 °C Internal dimensions W x D x H: 25cm x 20cm x 20cm External dimensions W x D x H: 51cm x 38cm x 72cm Casing dimensions W x D x H: 68cm x 48cm x 77cm Electrical power: 380V 3-phase 50 Hz CW-7780 has 8 shelf positions on 2" centers Flush-mounted extraction hood, stainless steel design, without extraction / fan Pgedpjzdr Dtjfx Am Tjp Type: CW-7780-JY-MP550 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2013, functionality: fully functional, cutting height (max.): 310 mm, cutting width (max.): 520 mm, Equipment: CE marking, documentation/manual, Behringer HBP 310-523 GA NA 300 PC, manufactured in 2013, with extensive equipment: PHOTOS will follow! - Powered infeed conveyor with cross transport - 3000 mm feed gripper with single-stroke, rotating movement - Double miter saw - Powered outfeed conveyor with hydraulically pivoting bridge - Pusher on fixed supports - General technical data in the appendix Podpfxezdq Hmo Am Tsgp This CNC-controlled sawing system is ideally suited for steel trading, mechanical engineering, and metal construction. Lengths, miter cuts on both sides, and material removal – all automatic.

Condition: used, Year of construction: 1998, Hydraulic chainsaw Blade maximum diameter 500mm Small stroke cutting capacity: 250/120mm Double stroke cutting capacity: 600/120mm Command by double buttons Motor 7.5kw Small run: 36 cups/min Double feed: 18 cuts/min 400V 350 cm stop with rollers with digital display Pjdpfsyngb Asx Am Togp 1 m roller conveyor at discharge Machine documents Machine footprint: Chainsaw: 110cm/140cm/h175cm (with pallet) Conveyor discharge: 370cm/110cm/h90cm Input conveyor: 70cm/65cm/h90cm Dimensions of the assembly: 530cm/140cm

Condition: used, Year of construction: 2007, functionality: unexamined, machine/vehicle number: AYA320NY3006, overall weight: 950 kg, total length: 1,700 mm, total width: 1,650 mm, total height: 2,120 mm, input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, Mazzali Intensys Lab Burn-in industrial (climate) oven, including manual Type: Intensys Lab 12+12HD Code: AYA320NY3006 Year of construction: 2007 Mains connection: 400V Temperature range: -40°C / +180°C (external cooling) Load capacity: 12 plates Oven Dimensions: 72 x 50 x 72cm Dimensions: 170 x 165 x 212 cm Weight: ~950 kg Podpfx Aewm Htqom Tsgp