Used Leica Leitz Dmrb 301-371.010 for sale (1,045)

Condition: ready for operation (used), smar LD 301 Intelligent measuring transducer, serial no. as per photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Isdpfx Abjxah Dbo Aoid

Condition: excellent (used), Year of construction: 1991, max. wheel diameter 10 - 330 mm gear width 180 mm max. module 7 min. module 0,5 clamping length 420 mm number of teeth 10 - 600 ical angle +/- 45 ° turning speeds 1100 - 1900 U/min grinding wheel diameter 280 - 350 mm grinding wheel width 84 - 104 weight of the machine ca. 5,1 t Isdpszd Hgijfx Ab Aoid dimensions of the machine ca. 4,5 x 6,0 x 2,3 m

Condition: good (used), Year of construction: 1999, Parts shown by hand not come. Iisdpfxjwbz Tue Ab Ajd

Year of construction: 1992, condition: ready for operation (used), Gear diameter range: 10mm-330mm, gear width: 180mm, max. module: 7, min. module: 0.5mm, clamping length: 420mm, number of teeth range: 10-600, helix angle: +/-45°, speed: 1900rpm, grinding wheel diameter range: 280mm-350mm, grinding wheel width range: 84mm-104mm. Machine dimensions X/Y/Z: approx. 4500mm/6000mm/2300mm, weight: approx. 5100kg, control: Fanuc Series 160i-T. Documentation available. An on-site inspection is possible. Iisdpfxszg Iq Ie Ab Aed

Condition: used, Electric forklift, EP type EFXZ-301-H - Li-Ion Front forklift, electric forklift Year of manufacture: 2026 Rated load capacity: 3000 kg Load capacity at 500 mm load center: 3000 kg Load capacity at 600 mm load center: 2700 kg Load capacity at 700 mm load center: 2500 kg Lifting height: 4800 mm Overall height: 2300 mm (container compatible) Mast height: 2300 mm Free lift: approx. 1600 mm Fork length: 1150 mm Iisdpfxjzay A Dj Ab Ajd Fork width: 120 mm Fork thickness: 40 mm Fork carrier width: 1150 mm Operating voltage: 80 Volt - 4-wheel superelastic, solid rubber tires - front 23x9-10 / rear 18x7-8 - Hydraulic power steering - Triplex free-lift mast - Side shifter - Operator protection roof - Drive battery Li-Ion, 80 Volt, 280 AH - Automatic charger installed with mains connection 230 Volt - LED lighting front and rear - According to operating hour meter, 10 operating hours - New TÜV inspection UVV (surcharge 150 EUR net) Length without forks: approx. 2550 mm Overall width: 1225 mm Weight with battery: 4600 kg New - unused, manufactured in 03-2026

Condition: good (used), Item: D-1036-Bulk feeder. ABK Sweden Type: STR 301 Stainless Steel bulk feeder with close vat at bottom. Discharge height: 2700 mm Ijden Nxpropfx Ab Asid Dimension: L 3500 x H 2700 x W 1500 mm Vat: W 1500 x L 1450 x H 1350 Vat inside: W 900 x L1050 x H700 Flight height: 100 mm Belt width: 300 mm

Condition: new, Year of construction: 2024, empty load weight: 178 kg, Dreipunktstreuer D301 0.3m³ Description: Spreader with three-point linkage (CAT 1) and a single spreading material chamber. The spreading material is conveyed via an auger and distributed by the patented spreading disc unit. Hydraulically driven motors, controlled by Kugelmann hydraulic block. All drives can also be operated manually in the event of control failure. Chain drive ensures high torque when starting the auger. Corrosion-resistant material combination: stainless steel subframe (VA) and plastic spreading material hopper. Support legs can be folded up towards the spreader during operation. Features: - Hydraulically driven single-chamber spreader with auger and spreading disc - Corrosion-resistant combination of stainless steel subframe and plastic hopper - Dimensions (WxDxH): 1080 x 590 x 1200 mm - Unladen weight: 178 kg - Includes apron/splash guard - Includes tarpaulin cover - Includes road lighting (compliant with StVZO) - RAL 2011 signal color - Manual emergency operation - Foldable support legs - Low energy consumption - Operable from an oil flow rate of 15 l/min - Patented spreading disc unit - Manual adjustment of spreading pattern - Winter service marked with reflective white warning film - Can be operated without control unit (via control cabinet key on easily accessible side) - Mounting for CAT 1 Standard Equipment: - Hydraulic drive for auger and spreading disc - Stainless steel (VA) subframe with RAL 2011 signal paint - Stainless steel spreading disc - Plastic spreading hopper - Plastic spreading disc guard - Mesh tarpaulin cover - Apron - LED lighting in accordance with StVZO - Foldable support legs (remain on device during use) - Manual adjustment of spreading pattern - Winter service marking - Operation possible without control unit - All drives are regulated and equipped with manual emergency operation - Hydraulic hoses with SVK couplings for forward and return - Spreader is fully storable (can be set down) Carrier Vehicle Requirements: - min. 20 L/min at reduced spreading output - max. 50 L/min with external oil cooler - Kugelmann system internally rated at 230 bar - Carrier vehicle with mounted spreader must not exceed permissible axle load or gross vehicle weight Optional Equipment: - k-basic 2 control unit - Wiring harness (flying) - Microprocessor control with CAN-BUS technology - Closed loop control of all drives (with feedback) - Functions: > Adjust spreading width > Adjust spreading density > Rotating beacon on/off > Work light on/off > Spreader operating/pause > Illuminated keys and rotary controls Iisdox S Tpvjpfx Ab Ajd > Data recording > Speed simulation > x2 key for travel-dependent spreading (compatible with k-basic 2) - Option: Travel-dependent spreading incl. start/stop function – driving signal required - LED work light 12V Storage location: not specified

Condition: new, power: 18 kW (24.47 HP), fuel type: diesel, fuel: diesel, Year of construction: 2023, operating hours: 45 h, Empty weight: 2.362 kg Max. working load: 3550 kg Rental currency: EUR Please contact KEY-TEC Sales for more information Iedpfx Abjw U Iqls Aeid

Condition: new, power: 18 kW (24.47 HP), fuel type: diesel, fuel: diesel, Year of construction: 2024, operating hours: 72 h, Empty weight: 2.362 kg Rental currency: EUR Iodpfxoyi R Dwo Ab Ajid Please contact KEY-TEC Sales for more information

Condition: used, Year of construction: 2005, functionality: fully functional, Used Muller model FTHSM 301 stainless steel drum lifter/blender. Suitable for blending, lifting, inverting and swiveling different type of barrels. Total height of column is 3400 mm, maximal lifting height (clamp axis) approx 2700 mm, maximum load up to 150 kg. Blender has following options: - blending: 2-10 rpm, rotating 360°, manually adjustable clamp inclination up to 30°, adjustable blending time 1-99 min. Iiedpezh Enmofx Ab Aed - inverting: 2 rpm, range 0-180° - lifting/lowering: 3m/min - swivelling: manually, max 350° - has a universal clamp with manual clamping operation by handwheel. Includes control panel.

Condition: used, Year of construction: 1993, Technical details: sheet width: 3150 mm plate thickness: 13 mm distance between columns: 3670 mm Iisdpfx Aou Icnfeb Ajd Knife length: 3150 mm down holder: 18 Stück back gauge: motorisch 1000 height over floor: 850 mm operating hours: 3256 Table dimensions: LxB: 3770 x 500 mm total power requirement: 30 kW weight of the machine ca.: 12,9 t dimensions of machine: 4,4 x 2,8 x 2,4 m Short stroke Continuous run Gap lighting Hydraulic sheet metal lifting device rear light curtain Positionable backgauge *

Condition: used, Year of construction: 1998, Technical details: total power requirement: 0,16 kw dryer Buran Buran DSM, YOM 1998; capacity 0,16kW, possible pressure 16bar, Filter-Ultramat Typ AG 0009, with internal safety against overpressure - with oil separator Iisdeu Nzxfjpfx Ab Aed *

Condition: refurbished (used), The vacuum pump will be fully overhauled upon receipt of the order and will then be ready for use. We recommend that installation is carried out only by trained personnel. Adaptation materials are available upon request. Oil filling: M-VAC 150 Delivery time: approx. 8 weeks Technical data: Dry claw vacuum pumps Motor rated power: 5.5/6.5 kW (50/60 Hz) Motor rated speed: 2900/3500 min-1 (50/60 Hz) Ultimate pressure: 150 hPa (mbar) (50/60 Hz) Ultimate pressure for continuous operation: 150 hPa (mbar) (50/60 Hz) Nominal suction capacity: 290/345 m³/h (50/60 Hz) Isdpjxt Ephjfx Ab Aoid The filter shown in the pictures is not included in the scope of delivery, but can be ordered as an option. Subject to prior sale! This offer is only valid for customers within Germany and in European countries!

Condition: used, Lens housing Diameter 145 mm Height without base 440 mm Isdpfxjcrcvke Ab Asid Base width 80 mm Width of the lens housing 280 mm

Condition: good (used), Bosch DMA 140D 301-D, 1070077623-216 Technical data: 670V-705V140A max. version: V.0.019  *New price: 13554,-€  Item condition: Used, in perfect condition Financing through our bank is also possible. Iijdeid Ii Topfx Ab Ajd komplett-konzept.leasingo.de You can find more plug-in cards - new and used - in our shop! International shipping costs on request!

Condition: used, Year of construction: 2024, machine/vehicle number: SN073384, functionality: fully functional, 12 months warranty, except for the engine. Iiedew Ia Rwspfx Ab Ajd

Condition: used, Year of construction: 2011, operating hours: 64 h, functionality: fully functional, Water chiller, MTA, 88.3 kW, model Tae Evo 301, 380III, weight: 775 kg. Inspected equipment, fully charged with refrigerant gas. VAT not included. Shipping throughout Spain and Europe. Shipping costs not included. Reference: 1148. Applications: plastics processing, air conditioning, automotive, pharmaceutical chemistry, food industry, laser, machine tools, oenology, etc. Tested – condition can be verified at our facilities. 2 units available. Isdpfx Absyfww No Ajid

Condition: used, Year of construction: 1994, operating hours: 36,170 h, machine/vehicle number: 50557900, power: 260 kW (353.50 HP), operating pressure: 9 bar, DEMAG air compressor including PARKER HIROSS air dryer! Isdsy Iapnspfx Ab Ajid TECHNICAL DETAILS Air pressure: 9 bar Air flow rate: 28 m³/min Motor rated power: 260 kW MACHINE DETAILS Electrical voltage: 400 V Electrical frequency: 50 Hz Max. operating temperature: 65 °C Refrigerant: 407C 7.5 kg Operating hours: 36,170 h EQUIPMENT Air dryer PARKER HIROSS POLESTAR SMART Type: PST460 Serial number: 398037030001 Year of manufacture: 2011 Motor power: 6.26 kW Weight: 525 kg

Condition: new, Model Name Iiedpfxel Sva Io Ab Aod SHARK 331-1 NC 5.0 SPIDER

Condition: new, Model Name Shark 332-1 SXI evo Iiodjgvkafopfx Ab Ajd

Condition: ready for operation (used), Year of construction: 1971, machine/vehicle number: 003711428, table mounting size: 254 x 1100 mm Ijded I Az Aspfx Ab Aoid table movement x: automat. u. v. Hand 682 mm table movement y: von Hand 380 mm table movement z: von Hand 457 mm milling head swivelling by: +/- 90 bzw. +/- 45 ° spindle taper: ISO 40 spindle turning taper: 70 - 2300 rpm tailstock carriages: 0,038 - 0,152 mm/min spindle drive: 380 V, 2,2 kW space needed: 1600 x 1600 x 2150 mm weight: 1420 kg

Condition: new, Year of construction: 2026, coolant pump power: 1,500 W, grinding wheel diameter: 300 mm, workpiece weight (max.): 1,700 kg, spindle speed (max.): 4,000 rpm, disc diameter: 300 mm, grinding spindle motor power: 3,000 W, grinding wheel bore: 32 mm, grinding wheel width: 10 mm, CNC Band Saw Blades Grinder NBS 301 is ideal for the sharpening of stellite, CV, bimetal and carbide-tipped band saw blades up to 300 mm wide. It operates with ceramic, CBN or diamond grinding wheels using water cooling. Driven diamond dressing wheel with automatic cycle is installed in order to keep the shape of ceramic stone clean and consistent. Thanks to this, the stable and consistent tooth shape of the sharpened blade is ensured. The grinding cycle is controlled via CNC servo motors; with the result that the saw tooth dynamics remain consistent. CNC Band Saw Blades Grinder NBS 301 incorporates a coolant reservoir and spray system which helps to keep the saw blades cool during grinding. Why are our sharpeners unique ? 1. Adjustment time savings 2. Grinding stones savings 3. Perfect, precise cutting edge and improved the quality of wood cutting 4. Extended life of your tools Isdpoy U Eqwsfx Ab Aoid 5. Issues with professional staff or machine operators ? No need to worry 6. The flexibility of automatic sharpener

Condition: new, Year of construction: 2024, Pad Printing Machine TIC 301 SDEL Iodpsfffqrofx Ab Asid 4-colour-machine, stand model, electro pneumatic control, open ink system, cliché size: 4x100x150mm), with servo controlled sliding table, which is height-adjustable via spindle, pad pressure 168kgs when 6bar. Delivery time 14-16 weeks

Condition: used, Double grinding pedestal AEG type DWS DWS 301/1100 No: 87 154303 Year of manufacture: approx. 1970 Grinding wheel diameter: max. 300 mm Grinding wheel width: max. 40 mm Ijdpfx Absxrgtxj Aeid Motor power: 1.1 kW Grinding wheel speed: 1500 rpm Power connection: 380 Volt, 50 Hz - Fitted grinding wheels Ø 260 mm - Motor newly fitted with bearings Required space (L x W x H): 650 x 450 x 370 mm Weight: 64 kg Good condition

Condition: used, Year of construction: 2000, type of input current: three-phase, 1 unit gravimetric dosing system / dosing scale for bulk materials. Last used to dose 4-5 tons/hour of limestone powder into the process. Container: stainless steel. Discharge via screw conveyor. Maximum container fill level: 205 kg. Adjustable discharge weight. Voltage: 400 Volt. Iiedpfjv T T H Sjx Ab Asd