Used Leiner Kkd-50 for sale (34,728)

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, For sale is a Cognex camera system for difficult OCR assembly verification and defect detection applications. The system never went into use and is being sold with all accessories as a set as shown in the pictures. The model number is IS7802-373-50-LAB // 821-10035-2R and is welcome to be researched on the internet. Iedpfx Aomx Sl Tjcpotn Digital Machine Vision Camera (2Mpixel) with PatMax RedLine + Gigabit Ethernet (GigE) - Demonstrator - COGNEX (In-Sight 7000 Gen2 Series) - 7802 - 1600x1200pixels UXGA resolution (1/1.8" CMOS monochrome scanning with global shutter) - 53fps - C-mount type / S-mount type - 7. 2GB (program; non-volatile flash memory) + 512MB (SDRAM) + 8GB (SD card) - 1 x digital input (15-28Vdc / optocoupler; isolated trigger input) + 3 x digital inputs (15-28Vdc / optocoupler; isolated discrete inputs) + 4 x digital outputs (26. 4Vdc 50mA / sink/source discrete outputs) - 8-pin M12 connector (Ethernet) + 5-pin M12 connector (supply) + 12-pin M12 connector (breakout) + Micro SD card slot - supply voltage 24Vdc - with RS-232C + Ethernet + PROFINET + CC-Link + Modbus TCP communication capability - IP67 - aluminum (die-cast) housing - compatible with Patmax redline

Year of construction: 1991, condition: excellent (used), functionality: fully functional, Möhringen high-performance band saw from a small sawmill. Frame width 750 x 710 mm. Stroke 500 mm. Speed 300 rpm. Hydraulic feed, continuously adjustable from 0 to 12 m/min. Hydraulic raising of the saw wheels with adjustable wheel pressure. Automatic adjustment of the saw frame overhang. Automatic electric central lubrication system. Full and idle pulleys. Reinforced steel flywheel. Electromagnetic remote control. Itodpfx Acsz N Dd Uspjn Saw mounting with sliding guides, saw gauges. Hydraulic saw tensioner. Electrical control cabinet and accessories. Professionally disassembled and loaded onto a truck for transport.

Condition: used, operating hours: 11,708 h, lifting height: 4,450 mm, fuel type: diesel, mast type: duplex, motor manufacturer: Deutz, Year of manufacture: 1990 Empty weight: 9.490 kg Itjdjziwkpepfx Acpsn Lifting capacity: 5.000 kg Maximum passing height: 310 cm Please contact Tobias Mayr for more information = Additional options and accessories = - 4th valve

Condition: excellent (used), This conveyor belt machine is ideal for trimming the edges of small carpet samples. K-50 Diagram Itsdpfx Ajz Savgjcpjn The key component of the KS 50 edge beveling machine is our SE 50 cutting unit. The machine is designed with an adjustable angle from 0° to 60°. The cutting depth is adjustable from 2 mm to 22 mm. The guide plate for carpet samples can be easily adjusted steplessly from 20 mm to 210 mm. Quick and easy adjustments can be made by releasing the locking lever. The conveyor belt is driven by a three-phase motor. The speed of the cutting motor and the conveyor belt is adjusted steplessly using frequency inverters. Larger pieces of carpet are guided manually as they pass through. Cutting width is 50 mm.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 8,110 h, load capacity: 5,000 kg, lifting height: 4,330 mm, free lift: 1,320 mm, fuel type: diesel, mast type: triplex, construction height: 2,350 mm, fork carriage width: 1,300 mm, empty load weight: 7,644 kg, total length: 3,100 mm, drive type: Diesel, construction width: 1,500 mm, Diesel forklift Load center: 600 ISO class: FEM 3 A Mast type: Triplex Transmission: Electric drive, AC Technical condition: good Front tire type: Superelastic Front tire size: 2 x 355/50-15 Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 2 x 250-15 Rear tire condition: 60 - 80% Battery year of manufacture: 2019 Double auxiliary hydraulics, cabin with heater, blue spot light, 2 front work lights, 2 rear work lights Itjdpfx Aoz Hnwrjcpen

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 6,967 h, load capacity: 5,000 kg, lifting height: 3,750 mm, free lift: 1,210 mm, fuel type: gas, mast type: triplex, construction height: 2,159 mm, fork carriage width: 1,350 mm, empty load weight: 7,180 kg, total length: 3,150 mm, drive type: Treibgas, construction width: 1,340 mm, Internal combustion forklift Load center: 600 ISO class: FEM 4 A Mast type: Triplex Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 355/45-15 Front tire condition: 0 - 20% Rear tire type: Superelastic Itjdpfx Aez H Ezbocpon Rear tire size: 2 x 250-15 Rear tire condition: 60 - 80% Battery year of manufacture: 2019 3-way valve, semi-cabin with PVC doors and heater, PVC side panels, double bottle holder, Blue Spot, 4x front work lights, 1x rear work light.

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 10,010 h, load capacity: 5,000 kg, lifting height: 5,440 mm, free lift: 1,650 mm, fuel type: electric, mast type: triplex, construction height: 2,560 mm, fork carriage width: 1,300 mm, fork length: 1,400 mm, empty load weight: 8,194 kg, total length: 2,900 mm, drive type: Elektro, construction width: 1,400 mm, Electric 4-wheel forklift truck Load centre: 500 mm Fork width: 120 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tires type: Superelastic Front tire size: 355/45-15 non-marking Itedpfxexn U Ics Acpen Rear tires type: Superelastic Rear tire size: 200/75-9 non-marking Battery voltage: 80V Battery capacity: 840Ah Battery year of manufacture: 2009 Description: In addition to this Still model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease-purchase & financing under attractive conditions are always possible. We are also happy to purchase your used equipment outright, even if you do not buy a truck from us. Our owner, Mr. Peter Sawitzki, will be pleased to advise you in detail about this RX60-50. P.S.: Our master forklift workshop specializes in repair, maintenance, refurbishment and custom construction of forklifts from 8 tons and up. We are also happy to offer your vehicle for consignment sale at our facility. Sideshift, Full free lift,

Year of construction: 2016, condition: used, Year of manufacture: Nov 2016 New: No Isdpfxexvbgbs Acpetn GEBRUIKTE TRAILER BANDEN 12 MM 11 MM 250 EURO 7/8 MM 150 EURO 4/5 MM 100 EURO

Condition: used, empty load weight: 16,200 kg, maximum load weight: 48,050 kg, overall weight: 64,250 kg, axle configuration: > 3 axles, first registration: 08/1976, loading space length: 7,800 mm, loading space width: 3,150 mm, loading space height: 1,380 mm, suspension: steel, tire size: 445/65R22.5, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 4 axles, Kässbohrer axles, leaf suspension, forced steering, lashing rings, 2-piece loading ramps, front support. Bodywork: 750 mm ramp width, fifth wheel height 1550 mm, king pin 3 ½", 4 x 13t axles, 4 axles with hydraulic forced steering, overall length 13,100 mm. Itsdpfx Acsxyzyispsn ACCESSORY DETAILS WITHOUT WARRANTY, subject to modifications, intermediate sale and errors excepted!

Condition: excellent (used), Year of construction: 2005, SIEMENS 840D control Itjdpfx Acouy R Siopon with B + C axis Working travels 500 x 450 x 400 mm Table swivelling +110°/-5° Table rotating 360° Spindle taper SK40 Spindle speeds -9'000 rpm tool changer 16 pos. 3D measuring tracer Laser tool setting system Zero point clamping system UNILOCK Misc. accessories MARCELS MASCHINEN CH

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, CNC Vertical Machining Center DECKEL MAHO DMU 50 eVolution With Heidenhain iTNC 530 path control Year of manufacture: 2004 Travel ranges: X 500, Y 420, Z 380 Spindle speed range: 0 – 18,000 rpm, stepless (SK 40) With the following accessories: 2-axis NC rotary table 500mm x 380mm Iodpfx Aez Ia I Sjcpstn Vertical tool changer with 32 magazine slots Full enclosure with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 3D measuring probe Coolant system 4 adjustable machine feet Operating manuals

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 5,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 500 mm, spindle motor power: 3,700 W, controller manufacturer: FANUC, controller model: Series 18-i-T, number of slots in tool magazine: 24, number of axes: 5, This 5-axis Gildemeister GP 50 was manufactured in 2004. It features a twin-spindle configuration with independent electrospindles and a continuous C-axis on both spindles. The machine includes two independent Sauter turrets with a total of 24 tool positions, all suitable for driven tools. If you are looking to get high-quality turning capabilities, consider the Gildemeister GP 50 horizontal turning machine we have for sale. Contact us for further details. • Y-axis: No • B-axis: Yes (associated with sub-spindle) • C-axis: Continuous on both spindles • Spindles: • Main spindle: Independent electrospindle with continuous C-axis • Sub-spindle: Independent electrospindle with continuous C-axis • Twin-spindle configuration • Bar passage (main spindle): 50 mm • Turrets / driven tools: • 2 independent Sauter turrets • Tool stations: 12 + 12 (24 total), all positions suitable for driven tools • Driven tools: Yes (both turrets) • Main spindle turret: 12 driven tool positions • Sub-spindle turret: 12 driven tool positions • Machine configuration: • 5-axis configuration • No Y-axis • B-axis with sub-spindle • Independent main and sub-spindle • Twin independent turret configuration • 24 total tool stations • Driven tooling on both turrets Additional equipment • Bar feeder: Top Automazioni • Bar feeder passage: 70 mm • Automatic bar feeding system • Tooling / accessories included: • 12 tool holders for 20 × 20 mm or 25 × 25 mm square tools • 4 radial driven tool holders • 2 axial driven tool holders, 90° • 10 drill holders, 90° • Approx. 60 spindle collets in various diameters • Collet types: BA60 and BA52 • Collets for Top Automazioni bar feeder Isdoz D E Amepfx Acpjtn Technical Specification Taper Size VDI 30 Counter Spindle Yes Driven Tools Yes

Condition: used, New diesel generator set, power generator, emergency power generator RTE Type 50kVA - identical to DAEWOO DAGFS 50 New, unused Serial No. 6739 - FB2512886 - Year of manufacture 2026 Rated power 50 kVA Continuous power max. 40 kVA Standby power 55 kVA / 44 kW Rated current 33 Amps Voltage 400/230 Volts, 50 Hz 230 Volts, 50 Hz Fuel consumption 99-liter tank capacity for an operating time of up to 8.5 hours at 75% load Fuel consumption at 75% load approx. 11 liters/h Fuel consumption in standby mode approx. 4 liters/h Itedpez Ek R Sofx Acpon Drive engine 4-cylinder diesel inline engine RICARDO ZH4105ZD Engine power at 1500 rpm 45 kW Engine power at 1800 rpm 55 kW Displacement 1500 cc Tank capacity 99 liters - Simple and compact design with sound-insulated metal housing - Forklift pockets for easy and safe transport - 3x CEE-16 Amp socket (3-pole, 230 Volt) - 1x CEE 16 Amp socket (5-pole, 400 Volt) - Terminals for cable power connection for external consumers, e.g. construction power distribution box - ATS module for grid replacement operation, for automatic emergency power switchover in case of power failure Space requirement L x W x H 2150 x 950 x 1200 mm Weight 900 kg New machine from stock

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 505004, total width: 970 mm, total length: 680 mm, total height: 700 mm, empty load weight: 250 kg, input voltage: 380 V, Manufactured: 08/2005 Power: 0.55 kW Power supply: 220/380 V three-phase 50 Hz Dough weight: 50 to 1200 g Production: 1200 pieces/hour External casing made of stainless steel Mechanical side adjustments Forming belts Output receiving table Emergency stop on the front panel Dimensions: 970x680x700 mm Weight: 250 kg Used SINMAG SM-380S dough sheeter The used SINMAG SM-380S dough sheeter is designed for professional dough shaping in bakeries. This unit, manufactured in August 2005, features a 3-cylinder system, mechanical adjustments, and felt conveyor belts. Its nameplate indicates a power of 0.55 kW and a 220/380 V three-phase 50 Hz power supply. The specific data for this machine is distinguished below from the characteristics derived from the European documentation for the range. Why this SINMAG SM-380S stands out The operation is based on the progressive rolling of the dough and then its elongation. The mechanical controls allow adjusting the passage through the cylinders according to the desired result. The documentation for this generation specifies that the right handle adjusts the spacing of the front cylinders, while the left handle adjusts the inclined cylinders to adapt the final length. This design allows bakers to work with different dough weights without complex electronic programming. The European documentation associated with this version states a range of 50 to 1,200 g and a shaping width of 750 mm. Itodez Eht Dopfx Acpjn Key advantages 3 cylinders for rolling and shaping Mechanical adjustments for rolling and length Felt conveyor belts Stainless steel construction, as documented for the SM-380S version Extendable receiving table Emergency stop present on this unit Wide range of documented dough weights Detailed technical specifications

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: HFE50-20LV010254, functionality: fully functional, pressing force: 50 t, stroke length: 350 mm, throat depth: 400 mm, working width: 2,090 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of axes: 8 Axis configuration: Y1 + Y2 + X1 + X2 + R1 + R2 + Z1 + Z2 Press force: 50 t Max. working width: 2,090 mm Frame distance: 1,665 mm Overhang: 400 mm Max. stroke: 350 mm Punch holder: Quick-change holder Tool holder type: European design MACHINE DETAILS Drive system: CNC Control system: Amada Operateur 2 CNC Power: 6 kW Dimensions & Weight Dimensions (L x W x H): 3,600 x 2,000 x 2,800 mm Weight: 5,500 kg Transport packages: 2 EQUIPMENT Tools Documentation CE marking Itjdpfx Acezzbaljpon

Condition: used, Year of construction: 1997, Working width: 500 mm Planer cutterhead: Strip cutter Number of cutters: 4 Length of surfacing table: 2800 mm Adjustment of surfacing table: Lever Indication of chip removal: Scale Adjustable angle of the fence: yes Motor power: 5.5 kW Ijdoz I Iumepfx Acpetn Machine length: 2800 mm Machine width: 1000 mm Weight: 900 kg

Condition: good (used), Year of construction: 2015, operating hours: 1,932 h, functionality: fully functional, Horizontal baling press Presto CC 50 M, year of manufacture 2015, with lifting and tilting device, semi-automatic. Technical data: Manufacturer: Presto Type: CC 50 M Year of manufacture: 2015 Operating hours: 1932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Feed opening: 1030 x 1100 mm Feed volume: 0.85 m³ Tying: 3-fold, wire, manual Throughput capacity at bulk density of: 35 kg/m³ - 1.3 t 60 kg/m³ - 1.7 t 100 kg/m³ - 2.2 t Bale dimensions: 750 x 1100 mm Iodpfx Acjz A T Tqjpjtn Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (L x W x H) Machine weight: approx. 4000 kg Materials: Paper, cardboard, film Note: The machine is in good condition. It has been inspected and tested by us in 28816 Stuhr. The video can be found on our website or our YouTube channel. The operating manual is available in German. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty.

Condition: used, The HERBOLD Plastkompaktor is a system for agglomerating films, fibres, chips, dust and flakes. Iedpoz Hxp Eefx Acpetn Poorly free-flowing waste is transformed into an agglomerate with a high bulk density and good flowability, which can therefore be fed directly into extruders and injection moulding machines. The system for sale has a main motor with 110 kW drive power and a throughput of 600 to 2000 kg/h depending on the feed material. All thermoplastics can be processed, even sensitive materials such as PET, PA and bioplastics can be agglomerated without thermal damage or discolouration. The system consists of the feeding device with silo, the compactor, a secondary granulator with sifting and fines return. On request, pre-shredding can be offered that is customised to the task at hand Trials can be carried out in our technical centre for suitability tests and sampling. We are the manufacturer of this system and can guarantee service and spare parts supply. The system is available at short notice!

Condition: good (used), DC Norris CTTC 50 Sous Vide Cook Tank / Tumble Chiller Itodszzzq Dspfx Acpen Industrial DC Norris CTTC 50 dual-purpose sous-vide cook tank and tumble chiller, designed for controlled low-temperature cooking and rapid cooling of vacuum-packed food products. Approximate cooking capacity of 136 kg and cooling capacity of 225 litres. Featuring automatic cooking and chilling functions, rotating drum for tumble chilling, stainless steel baskets, integral heating and cooling system and Mitsubishi HMI touchscreen control. Suitable for meat, poultry, fish, soups, sauces and other prepared foods. All-stainless-steel construction.

Condition: used, Year of construction: 2011, operating hours: 26,476 h, functionality: fully functional, workpiece height (max.): 500 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 2,590 mm, total length: 4,780 mm, total width: 4,410 mm, table height: 390 mm, table length: 390 mm, overall weight: 5,900 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 25 W, number of slots in tool magazine: 30, Equipment: chip conveyor, Year of construction: 2011 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Isdez Dku Uspfx Acpjtn Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Ready for internal cooling (40/80 bar) RENISHAW Measuring probe Automatic door Machine running times Under power: 43774 Spindle Working: 26476 Rated power kVA: 48 Basic machine dimensions / weight Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900

Year of construction: 1999, condition: ready for operation (used), travel distance X-axis: 600 mm, travel distance Z-axis: 2,290 mm, number of axes: 2, Cylindrical grinding machine manufactured in 1999. This Cetos BHU 50 A x 2000 features a swing diameter of 500 mm and a center distance of 2000 mm. It has a maximum grinding wheel width of 200 mm and can accommodate workpieces weighing up to 300 kg. If you are looking to get high-quality grinding capabilities, consider the Cetos BHU 50 A x 2000 machine we have for sale. Contact us for further details. - Z-Axis Travel (Longitudinal Travel): 2290 mm- X-Axis Travel (Cross Movement): > 600 mm (tested, capable of more)- Hydraulic Rapid Stroke (X-Axis): 120 mm- Max. Grinding Diameter: Minimum 500 mm- Grinding Wheel Diameter (New): 500 mm- Swing Diameter: 500 mm- Center Distance: 2000 mm- Grinding Wheel Dimensions (Diameter x Width x Bore): 500 x 80 x 203 mm- Grinding Wheel Diameter After Partial Wear: 380 mm- Minimum Ground Swing Diameter with Worn Wheel (380 mm): 70 mm- Maximum Grinding Wheel Width: 200 mm- Maximum Width of Multi-Piece Wheel Set: 200 mm- Maximum Sum of Individual Wheel Widths in Multi-Piece Set: 200 mm- Swing Diameter in Open Steady Rest: 110 mm- Swing Diameter in Closed Steady Rest: 110 mm- Taper in Workhead Spindle: MORSE 5- Taper in Tailstock Sleeve: MORSE 5- Clamping Chuck Diameter: 200 mm- Bore in Sleeve for Internal Grinding Spindle: 100 mm- Workhead Swivel Angle: +95° / -5°- Wheelhead Swivel Angle: ±45°- Upper Table Swivel Angle at 2000 mm Center Distance: +5° / -3°- Machine Weight with Standard Accessories (at 2000 mm Center Distance): 6700 kg- Workhead Spindle Speeds (Infinitely Variable): 18–112 min⁻¹ / 90–560 min⁻¹ (1st Row / 2nd Row)- Smallest Table Longitudinal Travel: 1 mm- Largest Table Longitudinal Travel (at 2000 mm Center Distance): 2290 mm- Cross Movement of Wheelhead: 415 mm- Hydraulic Rapid Traverse of Wheelhead: 60 mm- Table Speed (Infinitely Variable): 0.05–4 m/min- Cross Movement of Wheelhead per Automatic Infeed: 0.2 mm/ø- Cross Movement of Wheelhead per Automatic Infeed for Fine Grinding: 0.15 mm/ø- Automatic Infeed of Wheelhead at Table Reversals for Plunge Grinding: 0.0005–0.01 mm/ø- Automatic Infeed of Wheelhead at Table Reversals for Traverse Grinding: 0.005–0.05 mm/ø- Speed of Automatic Wheelhead Infeed During Plunge Grinding: 1 ⁻¹- Infeed Speed for Spark-Out Infeed: 0.015 ⁻¹- Total Power Requirement of Electric Motors: 16 kVA- Wheelhead Motor Power: 9.5 kW- Maximum Workpiece Weight Admitted Between Centers: 300 kg- Maximum Overhanging Workpiece Weight (Including Clamping Device): 60 kg- Table Infeed Advance: 6 m.min⁻¹ Iedpfxoz E Nfhs Acpjtn

Condition: used, empty load weight: 6,100 kg, maximum load weight: 27,900 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 08/2020, loading space volume: 45 m³, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, | Menci container body, approx. 50 m³ | SAF axles with disc brakes | Tool box, aluminum rims | Grain hatch, roll-over tarpaulin | Lift axle | Tires: 385/65 R22.5 | New braking system with disc brakes and air suspension | Subject to errors, typos, and prior sale. Iedpfxez Srmie Acpotn

Condition: new, table diameter 1500 mm table load 5000 Kg swivelling range 0 - 130 Grad turning speeds 0,05 - 0,5 U/min height adjustment 1300 - 2050 mm Iodpofv Ay Dofx Acpetn max. torque on the faceplate 10000 Nm engine output 1,5 / 1,5 kW welding current 1000 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch.

Condition: used, bore capacity in steel (diameter) 50 mm Itedpet U Sc Djfx Acpen bore capacity in cast iron (diameter) 60 mm threading cutting capacity: M36 throat 400 mm bore stroke 230 mm spindle taper MK 4 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 54 - 1032 U/min transmission ratio 12 Stufen column diameter 200 mm table surface area 550 x 550 mm total power requirement 3,0 kW weight of the machine ca. 0,72 t dimensions of the machine ca. 2,6 x 0,6 x 1,2 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark * inkl. IR/RS - (AUTOMATIC TURNING INVERSION FOR MANUAL TAPPING)

Condition: new, internal dimension 550 x 730 x 400 mm 0 185 l operating pressure 5-8 bar weight 50 kg dimensions 0,7 x 0,6 x 1,35 m Specification: Large lockable flap. Ijdpoupxigjfx Acpjtn Comfortable gloves. Multifunctional cleaning sprayer. LED lighting. Air blower. Readable pressure gauge. Adjustable air pressure regulator. Removable cleaning grid. Removable filter for dirt. Removable water collection tray. Internal dimensions (LxWxH) 550 x 730 x 400 mm Interior volume 185 l Operating pressure 5-8 bar Weight 50kg Dimensions L x W x H 0.7 x 0.6 x 1.35 m Since this parts cleaner has a thermostat that sets the degreaser to 50 Degrees Celsius can heat up, it is advisable to use this degreasing cabin To be used in combination with the Eurol cold degreaser HF Plus. This degreaser has a higher flash point than the usual cold degreasers.