Used Leutenegger Und Frei Fermentation Stop Cell for sale (14,200)

Condition: new, neu ca. 8 Wochen ab Auftragse Deutschland 3478 € 3000 mm 820 - 940 mm 300 kg/m 350 mm 63 x 3 mm 15 mm 2600 mm 250 mm with mm-scale and magnifier on stop carriage rolls and table with manual measuring system and a rigid flat steel guide stop carriage 6-fold ball bearing mounted, manually slideable and fixable fold up material stop FURTHER LENGTHS: 2 meter € 2.719,- 4 meter € 4.162,- OPTIONS: Nlodpfxjwirnlo Abueh material depth stop arm sprung and adjustabel up to the mechanical zero (man. dischargeable by eccentric lever SZ 05 € 528,- cover plate between the carrier rollers, galvanized per running meter SZ 06 € 122,- FURTHER LENGTHS AND ROLL WIDTHS ON REQUEST. (sample photo)

Condition: new, maximum load weight: 1,975 kg, overall weight: 2,500 kg, axle configuration: 2 axles, loading space length: 3,100 mm, loading space width: 1,850 mm, loading space height: 2,150 mm, total length: 4,488 mm, total width: 1,913 mm, total height: 2,150 mm, Year of construction: 2026, Humbaur HT 25 31 18 with cover and bows LH1500 and steel grating extension 620 mm Description: Everything the professional needs: A sturdy flatbed trailer with a completely hot-dip galvanized frame and chassis. All important components such as the longitudinal members or the underrun protection are also protected against corrosion, and the drawbar can be easily replaced if damage occurs during demanding work. Recessed lashing eyes secure the load. Each one can withstand a tensile force of up to 400 kg, as tested by Dekra. The robust side walls are made of anodized aluminum with recessed fasteners and, like the hot-dip galvanized corner posts, are completely removable. Nsdpfezphqtsx Abuelh Technical data: * Extended drawbar * Trailer type - Tandem axle * Construction type - Aluminum * Weight - 525 kg * Gross vehicle weight - 2500 kg * Payload - 1975 kg * Internal length - 3100 mm * Overall length - 4488 mm * Internal width - 1850 mm * Overall width - 1913 mm * Internal height - 350 mm including cover 1850 mm, or with steel grating extension 970 mm * Overall height - 1110 mm including cover 2610 mm * Loading height - 735 mm * Tires - 15 inches Standard equipment: V-shaped drawbar, hot-dip galvanized * 13-pin plug and reversing light * Floor panel, 18 mm thick * Side walls made of anodized aluminum with recessed fasteners, completely removable * Lashing eyes integrated into the V-shaped outer frame profile, tensile force 400 kg per lashing eye, Dekra tested * Support wheel

Condition: repair required (used), functionality: not functional, operating hours: 12,015 h, power: 11 kW (14.96 HP), input voltage: 11 V, intake manifold diameter: 500 mm, filter area: 213 m², total height: 7,500 mm, total length: 3,000 mm, total width: 3,000 mm, 213 m² filter area (standard filter hoses), vibrating motor, fire protection damper in the return air duct, motorized adjustment of the return air (inside/outside), fire hose, approximately 27 m³ intermediate silo, articulated arm discharge to the press. Nlsdpfx Abjz R Sulsuoh Briquetting press: motor 11 kW, 12,015 operating hours. The hydraulic pump was replaced and the hydraulic block was overhauled at approximately 10,000 hours; the hydraulic cylinders are leak-proof. The press operates in automatic mode with a level sensor; a second sensor is activated when the silo is overfilled. The briquettes have a diameter of 70 mm, and the density can be adjusted. The system requires repairs: the chrome plating on the clamping chuck is worn off. Since the system has not been in operation for 12 years, the electrical system needs to be overhauled, and the mechanical components need to be serviced. I would assist with the dismantling; a forklift is available.

Condition: excellent (used), Year of construction: 2021, Automated depalletizing station from THULL with YASKAWA YR-1-06VXL35-A00 and YASKAWA YR-1-041 XH190-A00 robots. - Manufacturer: THULL - System type: Automated cell for depalletizing cans - Intended use: Metal cans Nlodpfx Aoz Snyfobujh - Can dimensions (Ø x H): 90 x 82 mm / 90 x 92 mm - Performance: 300 cans/min. (18,000 cans/hour) - Number of robots: 2 - Robot 1: YASKAWA YR-1-06VXL35-A00 - Number of axes (Robot 1): 6 - Payload (Robot 1): 35 kg - Robot 2: YASKAWA YR-1-041 XH190-A00 - Number of axes (Robot 2): 4 - Payload (Robot 2): 190 kg - Year of robot manufacture: 2021 - Gripping system: Layer gripper and gripper for interlayer sheets - Empty pallet magazine: 15 pallets - Magazine load capacity: 500 kg - Vacuum pump: GARDNER DENVER G-BH2 - Conveying system: Plate and chain conveyors - Can outlet: From 5 lanes to 1 lane - Safety devices: Protective enclosure and safety light curtains

Condition: good (used), Year of construction: 2000, Tassold Fermenter - Used Nljdpfj Ad Abtex Abush - Year of manufacture: 2000-2005 - Capacity: approx. 100 liters - Manual control - Pump - On mobile wheels - Machine in good working condition/bakery condition - Collection from warehouse/delivery option available - Price: 1,500 €

Condition: excellent (used), Year of construction: 2023, Cell manufacturing year: 2023 Maximum stacking height: 2200 mm Performance: up to 12 cartons/minute Number of robots: 1 Robot: YASKAWA Motoman PL80 Robot manufacturing year: 2022 Serial number: 295-11-1 Number of robot axes: 5 Robot payload: 80 kg Robot weight: 560 kg Gripping system: vacuum gripper Interlayer magazine: 1 unit, with side access Transport system: roller conveyor with carton centering Nsdpfx Abez Snw Rouslh Safety devices: robot cell with safety light curtain

Condition: used, Year of construction: 2010, A Yaskawa robot cell for integration with CNC machines or production lines is offered. Robot type: YR-MH00005-E00, axes: 6, max. payload: 5kg, horizontal reach: 706mm, vertical working range: 1193mm, repeatability: +/-0.02mm, robot weight: approx. 27kg, control: Yaskawa DX100. Equipped with pneumatic Schunk gripper, SMC air preparation unit Series AC30 and 4 individual valves from the SY5000 Series. Including safety enclosure, pneumatic tubing, connection wiring, safety door switch and safety relay. The interface for integration with a CNC production machine or production line is prepared. An on-site inspection is possible. Nedozxr Rvjpfx Abuelh

Year of construction: 2016, condition: used, The offered system consists of a total of seven documented components: It is equipped with: Pitec flour filling station, silo 1 capacity: 5400kg, silo 2 capacity: 4000kg, silo 3 capacity: 4000kg, silo 4 capacity: 4000kg, Pitec discharge station with electronic scale, Thuba Earth Monitoring System. Inspection possible by appoint Nodpfx Absz H Ur Neuolh

Condition: used, Year of construction: 2023, operating hours: 2,600 h, functionality: fully functional, total width: 18,500 mm, total length: 23,000 mm, compressed air connection: 6 bar, type of input current: three-phase, input current: 500 A, power: 275.5 kW (374.58 HP), space requirement length: 23,000 mm, space requirement width: 18,500 mm, For sale is a state-of-the-art, fully integrated wood pelletizing and shredding line (built in 2023) for processing A1-grade waste wood and disposable pallets into high-quality heating pellets. This turnkey complete system covers the entire process, from material feed to two-stage shredding, metal separation, suction and filtration technology, pelletizing, cooling, and bagging into big bags or smaller containers. Equipment: * Automatic scraper floor hopper with feeding system * AMIS shredder ZWS 1700 * High-performance cutting mill * Belt conveyor magnet and metal separator * SPÄNEX suction and filtration system with fire protection * GreCon spark detection system Nledpfozhbf Isx Abuoh * 10 m³ material hopper with dosing system * 2 × ECOKRAFT pellet presses LP22 * Rotary screen systems with conveyor belts * Big bag system and semi-automatic bagging system Technical data: * Year of manufacture: 2023 * Total connected load: 275.5 kW * Required fuse rating: 500 A / 400 V * Production capacity during test run: approx. 460 kg/h * Space requirement: approx. 23 × 18.5 m The system is in near-new condition and is available immediately. Detailed technical documentation with all components and specifications is available and will be provided upon request.

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Nledpfx Abewc Afhjujh Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Nsdpfxjwc Ri Io Abujlh Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: Nlodpfx Abswc Rk Esueh SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: good (used), functionality: fully functional, For sale is a high-quality FELSOMAT FlexBox for automated workpiece handling in serial production. The system is designed for the automatic loading and unloading of CNC turning, milling, grinding, or gear cutting machines. It features servo-driven handling with a pneumatic gripper and an additional linear transfer axis, enabling the implementation of multiple processing stations or larger travel distances. The system comes from an industrial production environment and is ideally suited for special machine builders, automation specialists, or as a basis for retrofit projects. Equipment: FELSOMAT FlexBox Fully enclosed safety enclosure Automatic linear handling Servo-driven axes Pneumatic workpiece gripper Additional linear transfer axis Workpiece storage Control panel Nlodpfozivapjx Abueh Safety monitoring Control cabinet integrated Extraction connection Completely wired Typical applications: CNC turning machines CNC machining centers Grinding machines Gear cutting machines Measuring stations Assembly automation Manufacturing cells Technical data (typical) Feature Specification Manufacturer FELSOMAT Model FlexBox Design Automation cell Axes Servo linear system Gripper pneumatic Workpiece handling automatic Voltage supply 400 V Safety cabin present Additional axis Linear transfer Scope of supply FELSOMAT FlexBox Servo handling Linear transfer axis Gripper system Control panel Control cabinet Safety cabin Condition The system is in good optical condition. The handling system, linear axis, and safety devices are all fully functional. The machine is being sold due to the closure of the operating facility. An inspection can be arranged at any time by appointment.

Condition: good (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN MOUNTED SPREADER DUPLEX 1.8 m³ STAINLESS STEEL made of V2A stainless steel Container volume 1.8 m³ - 2 screw conveyors - Spreader with spreading disc, 8 m spreading width (rustproof) - K-Tronic 2 control system with flying cable harness - Wet salt systems (technical data see below *) - For moistening in the impeller of the spreading disc - Automatic dry material reduction - 2 side salt tanks and 1 center tank - Tank capacity approx. 820 liters - Stainless steel spreading disc, 8 m spreading width - Screw couplings - Cable separation - Folding roof Nedpjzf E Dvsfx Abuslh - All-round beacon, halogen - PVC skirt - Work light - Volumetric meter or weight meter of the control system as - Spreading control - Sign "Winter service" - Drive via vehicle hydraulics * Wet salt system mounted on the spreader Wet salt system suitable for the above-mentioned spreader, driven by a hydraulically operated gear pump in a separate closed control circuit (with feedback) for maximum dosing accuracy, even with low application rates, stepless and percentage- accurate dosing, capacity, as described above, 820 liters Standard equipment: - Salt tanks on both outer sides, as well as under the container between the spreader compartments - Level indicator or conveying control - Connection for filling - Hydraulically operated gear pump for dosing - Filter unit - Brine distributor - Control system k-tronic 2 - Paint finish RAL 2011 - municipal orange - Access ladder - Electrical spreading control - Electrical spreading pattern adjustment - Mounting kit according to agreement and vehicle Advantages of KUGELMANN mounted spreaders: - Kugelmann screws always have 3 pitches (patented) - The screws can be run in reverse with the push of a button, so that solid objects can be quickly and easily loosened (patented) - Daily application counter standard - Extremely low construction and extremely low center of gravity, resulting in significantly better vehicle handling and loading of spreading material as well as visibility to the rear - Control systems are always interchangeable (data is stored on the slave) - High level of in-house production - High-pressure resistant hydraulic motors, even with full pressure in the return line, no seals are damaged! (Can occur due to incorrect connection of the hydraulic lines.) Subject to change, printing errors, and prior sale. All information is provided without guarantee. The sale takes place with the exclusion of any warranty.

Condition: used, Year of construction: 2006, Overview This crate palletizing and depalletizing line was integrated in 2006 by Profipack Verpackungsmaschinen GmbH (Austria) around two Yaskawa Motoman NX100 articulated robots - one palletizing cell and one depalletizing cell - together with a Logipack vertical pallet strapper. It is still installed at a German brewery, where it palletized and depalletized crates for beer, CSD and mineral water production until the whole line was stopped. Because it served multiple product lines, it handles a wide variety of crate formats on Euro pallets. The machine can be visited on request. Technical data - Manufacturer / integrator: Logipack (vertical strapper), Profipack Verpackungsmaschinen GmbH (system integrator, Austria) - Robots: 2x Yaskawa Motoman NX100 articulated robots (palletizer + depalletizer) - Year of manufacture: 2006 - Machine type: crate palletizing and depalletizing line - Capacity: 33,000 bph (160 bottles per layer) - Pallet format: Euro - Crate formats: 5x4 - 400x300x300 mm / 6x4 - 400x300x270 mm / 5x4 - 400x300x210 mm / 4x3 - 355x275x345 mm / 4x3 - 400x300x330 mm / 5x4 - 355x275x255 mm / 5x4 - 400x300x290 mm - Controls: Siemens SIMATIC S7 PLC, B&R Power Panel HMI with ACOPOS servo drives, Danfoss VLT 5000 frequency drives, SEW MOVIDRIVE Equipment - Palletizer robot cell (Yaskawa Motoman NX100) with layer-gripper tooling - Depalletizer robot cell (Yaskawa Motoman NX100) with layer-gripper tooling - Logipack vertical pallet strapper - Pallet and crate roller/slat conveyors - Layer-forming / grouping table - Unloading table - Pallet magazine Njdpfx Abjzk I N Ssuslh - Separate BMS-branded control cabinet - Safety fencing with light-curtain guarding Condition Used - complete, still installed; no longer in production (line stopped). Availability Available immediately. Location: Germany. Can be visited on request. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: good (used), - Capacity: approx. 5,000 liters - Filling quantity: approx. 3,500 – 4,000 kg - Equipped with a slow-speed special agitator Equipment: - Bottom discharge slide valve, DN 65 - Clear outlet: DN 40 - Oval manhole - Sampling valve - Dome, DN 400 Dimensions: - Diameter: 1,900 mm - Height of conical bottom: 800 mm - Shell height: 1,500 mm - Overall height: approx. 2,900 mm Nsdezc H Tujpfx Abuelh

Condition: good (used), Die set, hand pipe thread cutter, thread cutting machine, pipe thread cutter, pipe thread cutter, cutting head, tap wrench -Tap cutting set: 47-piece / internal and external threads -Size: M3 to M20 -Individual components: see photos -Dimensions: 500/420/H85 mm Nlodpfx Aeyk Upyjbujh -Weight: 9.1 kg

Condition: good (used), Roller conveyor, conveyor track, roller conveyor belt, roller track, saw roller block, saw roller block, saw horse, saw roller conveyor, length stop, longitudinal stop, saw stop, material stop, motorized length stop, controlled length stop, roller conveyor, conveyor track, roller conveyor belt, roller track -Length stop for: saws -with: stop by hand in longitudinal direction -with: Side stop movable via hydraulic motor in transverse direction -Display via: SIKO mechanical position indicator -Roller conveyor: Ø 80 x 1340 mm -max. stop length: 2950 mm Nlodpfsd D R Syex Abush -Roll spacing: 300 mm -Dimensions: 3000/1640/H940 mm -Weight: 534 kg

Condition: excellent (used), functionality: fully functional, Weiler Primus lathe in excellent condition. Can be inspected while powered on. Nedpox Htf Hefx Abuelh Technical data: Center distance: 450 mm Center height: 120 mm Spindle bore: 23 mm Speed: 30 – 3000 rpm Tailstock: MK 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1550 mm Price reduced!

Condition: new, Year of construction: 2026, ATTENTION: Njdpfx Abjfvzmyjuolh No machine is sold, only GRINDING WHEELS for these machine types: SCHNEEBERGER LEPUS, SCHNEEBERGER WSL and LAMELLO Lepus. Image 1 + 2 Pictures 3 - 5 are sample pictures for these machines dry & wet chisels u. Hand planer knife grinding machines Price per piece: Grinding wheel COARSE orange: EUR 75.- excl. VAT. & Shipment CHF 75.- excl. VAT. & Shipment Grinding wheel FEIN white: EUR 115.- excl. VAT. & Shipment CHF 115.- excl. VAT. & Shipment Z.K .: Minimum purchase quantity 2 pieces per order. Your direct contact: Marc Brönnimann We sell grinding wheels for the following chisels and hand planer knives / sharpening machines: LEPUS, SCHNEEBERGER, LAMELLO, WSL, can be used wet & dry!

Condition: used, Stop for chop saw, pull saw, stop and measuring system -Manufacturer: elumatec, stop and measuring system with digital display -Inclusion: Bosch profile Nledpfx Abjinwuqouoh -Length unit: 4280 mm -Price: complete -Dimensions: 4710/510/H635 mm -Weight: 72kg

Condition: used, mileage: 2,600 km, power: 18 kW (24.47 HP), first registration: 05/1975, fuel type: diesel, overall weight: 1,300 kg, color: green, gearing type: mechanical, suspension: other, operating hours: 2,600 h, Equipment: all wheel drive, 1. First owner, new inspection (MOT/emissions test), diesel, manual transmission, all-wheel drive, first registration: May 23, 1975, 2,600 operating hours, Holder rotary tiller, original condition, permissible total weight: 1,300 kg, first-owner version, lawn tires also possible (both are available). FOR US, THE CONDITION AND OUR GUT FEELING ARE DECISIVE; THE PRICE IS SECONDARY. If you have any further questions, please do not hesitate to contact Mr. Schlägel at the following number. //*TRADE-IN, PART EXCHANGE, OR FINANCING OF YOUR VEHICLE IS POSSIBLE! All information is without guarantee.* You can find more offers on our website: The description and specified data do not constitute a warranty and are not binding. The purchase contract concluded at the car dealership when purchasing the vehicle is binding. Errors and prior sale are subject to change! Nsdpfx Asvictmsbujlh

Condition: good (used), Length stop, rip fence, saw stop, material stop, motorized length stop, controlled length stop -Length stop: for various machining options -Max. stop length: 2970 mm -Individual components: see photos Accessories: incl. Haubold stapler Nlodpfjhablasx Abuoh -Dimensions: 3550/760/H1200 mm -Weight: 396 kg

Condition: used, Length stop, length stop, saw stop, material stop, motorized length stop, controlled length stop -Length stop: for various processing options -Max. Stop length: 2970 mm -Individual components: see photos -Dimensions: 3530/700 / H1170 mm -Weight: 346 kg Nledpfxohablts Abuoh

Condition: new, neu ca. 8 Wochen ab Auftragse Deutschland 4776 € 3000 mm 820 - 940 mm 300 kg/m 350 mm 63 x 3 mm Nlodpfjyq Spkjx Abuoh 15 mm 2550 mm 250 mm digital readout adjustment by handwheel pneum. brake material depth stop with 12 times ball bearings on generous large dimensioned guiding profile FURTHER LENGTHS: 2 meter € 3.801,- 4 meter € 5.319,- OPTIONS: Measuring systm with 1/10 mm readout Z 58 with magnetic polring and sensorhead SZ 09 € 883,- material depth stop arm sprung and adjustabel up to the mechanical zero (man. dischargeable by eccentric lever SZ 05 € 528,- pneum. arm retraction (10 mm discharge stroke) of sprungmaterial depth stop (SZ 05) SZ 07 € 441,- cover plate between the carrier rollers, galvanized per running meter SZ 06 € 122,- FURTHER LENGTHS AND ROLL WIDTHS ON REQUES.