Used Megey Bm-M 1,2 for sale (69,158)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system with hot-dip galvanized finish Scope of supply: 4 rack uprights, 4,160 mm high, with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (1,300 mm spacing) Fastening material (screws, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm Bsdpfx Alod Tqals Aeln - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to withstand the acting loads. The ground conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: new, roller (top) diameter: 56 mm, roller diameter: 56 mm, sheet thickness steel (max.): 1 mm, - Capacity 1050 x 1 mm - Roll diameter 56 mm - Conical roller - Swiveling top roller - Foot control Bedpfsr Ixrkex Al Aoln - Emergency stop - Documentation - 400V

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Bsdpfjfdkbhsx Al Ajln Detailed description: - Stable steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable transport with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The base must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational accident insurance association, it is recommended that the rack uprights have a minimum of 500 mm overhang from the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system with hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (spacing 1,300 mm) Blodpfxofdkb Tj Al Aon Fastening material (screws, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height at 100 mm intervals - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with prior notification of delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by wind and snow loads. The substrate must be made of concrete, level, and suitable for dowels, and must be able to absorb the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored to the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized design Scope of supply: 4 rack uprights, height 3,500 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight services with notification before delivery. Bledpefdkb Uefx Al Asn The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow loads. The substrate must be made of concrete, level and suitable for dowels, and must be able to absorb the applied loads. The customer is responsible for checking and ensuring the soil condition and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top edge of the upright on the top storage level.

Condition: good (used), Year of construction: 1987, turning diameter over cross slide: 810 mm, spindle bore: 130 mm, turning diameter: 1,140 mm, turning length: 7,500 mm, quill stroke: 300 mm, total length: 7,500 mm, total width: 2,300 mm, total height: 1,650 mm, bed width: 600 mm, Please note: not original pictures its only 3000 length not 5000 mm   3 Guide way construction 2 Axis HeidenHain Digital readout Feed in 3 directions all tool post slide Central lubrication Bledpfx Aev S Dp Iol Ajn   Work load flying in chuck 2500 kg Work load NOT supported 8500 Kg Work load supported 10000 kg   Optional 4 chuck approx. 1200 mm Optional 4 chuck approx. 1500 mm Optional package with 3 steady rest fixed model from  .... to ....  Turning length: 5000 / 7500mm Turning diameter bed Ø: 1140mm Turning diameter slide: 810mm Turning diameter pit Ø: 1500mm Pit length: 2500mm Spindle bore: 130mm Bed width: 600mm Quill: 130Ø Quill stroke: 300mm Spindle mount: 6Mk Power: 25kW Speed: 9 - 900rpm Length: 7500mm Width: 2300mm Height: 1650mm Weight: 12000kg

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Bledpfoxz Dqmsx Al Ajn Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m • Cut detector • Swivelling control panel • Micro-spray device • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 1997, turning diameter over bed slide: 1,240 mm, turning diameter over top slide: 980 mm, turning length: 3,000 mm, DBC Turning Length: 3000mm Swing over bed Ø: 1240mm Swing over cross slide Ø:980mm Swing in the gap Ø: 1980mm Gap length: 1500mm Spindle bore: 130mm Spindle power: 30kW Bjdpfxjx Di Rqs Al Ajln Bed width: 500mm Stroke pinole: 300mm Spindle taper: 5Mk Speeds / ranges: 800Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Workpiece load: 4000 Length: 7000mm Width: 2200mm Height: 2300mm Weight: 12400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: not inspected (used), Year of construction: 1995, functionality: unexamined, pressing force: 200 t, stroke length: 400 mm, throat depth: 250 mm, working length: 3,100 mm, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the machine within the specified period between 08.04.26 and 16.04.26! TECHNICAL DETAILS Maximum pressing force: 2000 kN / 200 t Maximum working length: 3,100 mm Maximum stroke: 400 mm Throat depth: 250 mm MACHINE DETAILS Bljdeyk U Ddepfx Al Aon Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Rated current: 100 A Connection power: 22 kW Total connected load: 35.5 kW Dimensions & Weight Dimensions (L x W x H): 4,500 x 4,000 x 3,200 mm Machine weight: 19 t Transport width: 2,700 mm EQUIPMENT Workshop drawer cabinets Numerous punches, dies, and additional press brake tooling Operating manual External reference: 17

Condition: new, sheet width 1000 mm plate thickness 3,3 mm distance between columns 1050 mm diameter of upper rolls 90 mm total power requirement 1,1 KW weight of the machine ca. 0,39 t dimensions of the machine ca. 1,4 x 0,9 x 1,2 mm Bledpfx Alerb Hcfo Aen Sheet metal bending machine with special dimensions: - Capacity 700 x 4 mm - Conical bending - Swing-out top roller - Emergency release safety device - Documentation - 400V

Condition: new, - Capacity 1550 x 2.2 - Electrically adjustable rear roller - Digital display - Hardened rollers - Conical roller Bljdpfx Alsviyune Aon - Swiveling top roller - Brake motor - Foot control - Emergency stop - Documentation - 400V

Year of construction: 2001, condition: ready for operation (used), Max. pressing force: 1000kN, max. working length: 3100mm, throat depth: 250mm, connected load: 18kW, weight: 9.5t, operational hours counter: 76,566h, with accessories and documentation, was maintained regularly. Blodpolzizmefx Al Aen

Condition: new, roller (top) diameter: 46 mm, roller diameter: 46 mm, input voltage: 400 V, empty load weight: 225 kg, - Capacity 1050 x 0.8 mm - Roll diameter 46 mm - Conical roller - Swivel top roller - Foot control - Emergency stop - Documentation - 400V Bljdpjr Iza Rsfx Al Aen

Condition: used, Year of construction: 2024, For inquiries regarding the attachment, Mr. Herden is available to assist you (by phone). Seppi M. BMS 125 Forestry Mulcher / incl. rotary actuator / Year of manufacture: 2024 / DEMO machine / in stock & immediately available / very good condition Blodpfx Aeyltvbsl Asn Price: €33,490.00 net / €39,853.10 gross Working width: 125 cm Total width: 156 cm Depth: 111 cm Height: 85 cm Weight: 1,285 kg - Ideal machine for mulching in hard-to-reach locations such as along roadsides, riverbanks, steep slopes, or for clearing gas and power lines - Mulches shrubs and wood up to 30 cm Ø - Suitable for excavators from 13 to 30 tonnes - For mounting to various adapter plates - Drive designed for hydraulic motor depending on the carrier machine’s flow rate - Indirect V-belt drive with 5 V-belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge along the entire length of the hood - Front chain guard - Rear chain guard - Height-adjustable skid shoes in sandwich design, reinforced with a carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools and tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 OPT 465 M-BOOST angle-axis piston motor - With automatic displacement regulation 60–80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60–80 - Required pressure in bar (min-max): 200–350 - Required hydraulic flow rate: 80–170 l/min OPT 372 hydraulic 190° rotation device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening the rear hood Optional: Verachtert CW20/30/40 adapter plate incl. bolts and installation = €2,510.00 net The rotor requires 3 hydraulic lines: supply, return, and leakage oil. An additional hydraulic circuit is required for the hood. The unit is supplied without hoses or connectors. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse has a very large selection of various Seppi M. products that are ready for immediate delivery! Mr. Herden is happy to assist you by phone. Upon request, we can also provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with a stock of 800 used vehicles, we are one of the largest commercial vehicle dealers in...

Condition: excellent (used), Year of construction: 2015, workpiece weight (max.): 20,000 kg, spindle motor power: 90,000 W, spindle speed (max.): 75 rpm, turning diameter: 4,000 mm, turning height: 1,900 mm, New 2015. Purchased 2022 for a project was cancelled before commissioning was completed and the machine has not been used in any production after commissioning. Very full documentation is available upon request Main specification details. Turning diameter 3600mm. Maximum turning height 1900mm. Maximum table load 20,000kgs. Table speeds are infinitely variable between 14rpm and 75rpm. Table drive motor 90KW AC. Bsdpfx Aljy Uxdko Asln Table torque to 61168NM. Z axis thrust 36000NM. X and Z axes traverse rates 1-5000mm/min. Ram is 320mm diameter Price, ex works UK Midlands £330,000 VTT-WB can quote transport installation and commissioning

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 3,000 mm, workpiece height (max.): 30 mm, TECHNICAL DETAILS Axis: 920 mm X-axis: 3,000 mm A-axis: 360° Material thickness Z: 12 mm - 30 mm Feed rate: 20 m/min Minimum dimensions (plate): X: 300 mm Y: 120 mm Z: 12 mm Maximum/minimum hole diameter: 3 mm - 35 mm Maximum cutting depth with saw blade: 10 mm MACHINE DETAILS Motor power: 0.75 HP Bedpfxezkt A Ro Al Ajln Voltage: 400 V Required extraction capacity: 2,300 m³/h EQUIPMENT 4-position drill chuck Saw blade in the X direction

Condition: excellent (used), overall weight: 277 kg, total width: 650 mm, total length: 1,940 mm, total height: 1,050 mm, input voltage: 220 V, Plockmatic Production Booklet Maker (PBM) 350, including the (SquareFold) BookFold Module and Trimmer Module. This booklet maker is in very good condition! The machine can be used offline, as shown in the photo, or connected to a machine from the Ricoh Pro 8100/8200, C7100/C7200, or C9100/C9200 series. Counter readings: PBM 350: 187,000 BookFold Module: 176,000 Trimmer Module: 207,000 Produces professionally finished booklets, both inline and offline, with stapling and folding. Capacity: up to 35 sheets of paper (80 g/m²) for folded booklets of approximately 140 pages. Supported paper sizes: width of approximately 206 mm to 320 mm, length up to approximately 457 mm. Suitable for A and B formats and various custom sizes. Are you looking for other options for this machine? We are flexible and can customize the machine to your requirements! This machine has been inspected and thoroughly tested by our own specialized technical service department. Bljdpfoz Atuqsx Al Asn Would you like more information? Please feel free to contact us. Worldwide shipping is possible.

Year of construction: 2005, condition: excellent (used), Description New blades and counterblades with suction HS-40/SL-SP Specifications Manufacturer TRIA Model BM 50-30 Bsdpfxszwwdxs Al Ajln Year 2005 Condition Used Stock Number AI2182

Condition: good (used), Year of construction: 1990, pressure ca.10 t throat anpassbar mm stroke 250 mm table surface area 220 x 220 mm mm material diameter max. ca. Ø 267 mm Blsdpfxsul Eawj Al Asn total power requirement 1,5 kW weight of the machine ca. 430 kg dimensions of the machine ca. 899 x 772 x 1520 m

Condition: used, GEA crumb master. 600 wide belt. As new condition can be supplied with a wet coater. Bledpjz D Hqlofx Al Asn

Condition: used, Booklet Maker / Broschürenanlage CP Bourg BSF - BCM-e - BM-eSpeed max. 5000 booklets/hour Grammatur / Paper weight 60 - 350 g/m2 Papierformat / Paper Size min. 119 x 1180mm - max. 370 x 600mm Broschürendicke ((mit Heften-Falzen-Schneiden) / Booklet thickness 2-30 sheets of 75gsmKopf-/Blockheftung / TOP/side stitching: Papierformat min. 119x170mm - max. 370x300mm Broschürendicke / Booklet thickness 2 - 55 Blatt 80 g/m²Falzen/Frontbeschnitt / Folding/trimming: Papierformat min. 119x170mm - max. 370x300mm Broschürendicke / Booklet thickness 2 - 55 Blatt 80 g/m² Frontbeschnitt / Face trimming 0 to 25 mm (0 to 0.98 in)Bogenanleger Bourg BSF für Offline- und Inline-Verarbeitung Sheet Feeder Bourg BSF for Off-Line and In-Line finishing Online-Video-Inspection by Skype-Video Bjdpfxsq Sbp Us Al Asln We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2024, condition: new, The LITech V-BM100 is designed for “1001 laboratory applications”. Typical processing times are between 15 and 45 seconds. The Mixer mill can prepare 2 or more samples from 0,2ml of up to 60 ml. It is designed as well for high-sample throughput. Bljdpsgkr Rcofx Al Aen

Condition: new, For inquiries regarding the attachment, please contact Mr. Herden (by phone). Seppi M. BMS 125 Forestry Mulcher / incl. Rotary Motor / NEW / In Stock & Immediately Available Price: €35,190.00 net / €41,876.10 gross Working width: 125 cm Overall width: 156 cm Depth: 111 cm Height: 85 cm Weight: 1,285 kg - Ideal machine for mulching in hard-to-reach locations such as roadside verges, riverbanks, steep slopes, or for clearing around gas and electricity lines - Mulches brush and wood up to 30 cm diameter - For excavators from 13 to 30 t - Suitable for mounting on various attachment plates - Drive designed for hydraulic motor, depending on the carrier’s oil flow - Indirect V-belt drive with 5 belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge along the entire length of the hood - Front protection with chains - Rear protection with chains - Height-adjustable skid runners in sandwich construction, reinforced with a hard metal plate - Color: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools with tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 OPT 465 M-BOOST Axial Piston Motor - With automatic displacement adjustment 60-80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60 - 80 - Required pressure in bar (min-max): 200 - 350 - Required hydraulic flow: 80 - 170 l/min OPT 372 hydraulic 190° rotary device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening the rear hood The rotor requires 3 hydraulic lines: pressure, return, and leakage oil. An additional hydraulic circuit is needed for the hood. The machine is supplied without hoses or fittings. Bsdpeyltv Iefx Al Asln Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) are in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse, all available for immediate delivery! Please contact us for more information. We are happy to provide you with a financing offer upon request. We are the official sales and service partner for Seppi M. We are the official sales and service partner for Magni telehandlers. We are the official sales and service partner for DMS. We are the official sales and service partner for Westtech. We are the official sales and service partner for JCB construction machinery. We are the official sales and service partner for Mercedes-Benz. We are the official sales and service partner for Iveco. We are the official sales and service partner for Holp. We are the official sales and service partner for OilQuick. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the full Seppi M. product range for you! Errors and prior sale reserved! = Further Information = Please contact Marius Herden for more details.

Condition: refurbished (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, total height: 17,000 mm, total width: 34,000 mm, total length: 23,000 mm, overall weight: 2,600 kg, compressed air connection: 8 bar, warranty duration: 6 months, pressure: 6 bar, working width: 2,400 mm, infeed height: 1,000 mm, power of the servo motor: 7 W, Equipment: documentation/manual, This is a used machines, fully refurbished and serviced by EMproject89. It is located in our facility in Serbia. Available NOW!! Specifications: BOXmaker PRO 2400S - automatic setup (set-up time up to 30 seconds) Bodod Sap Tspfx Al Aoln CAPACITY: up to 1200 boxes per hour (FEFCO 200) MACHINE DIMMENSIONS: 3400mm x 2300mm x 1700mm CARDBOARD TYPE: single, double, and triple wall up to 10mm and 1000GSM MAXIMUM BOARD SIZE: 2400mm X 7000mm MINIMUM BOARD SIZE: 200mm width x 800mm length Servo puller: 2m/s Slotting knives x2 Servo powered slotting subassembly (30% faster cycle) Creasing wheels with integrated Scalpels (longitudinal creasing and cutting off glue flaps) x2 Scalpel module (for longitudinal cuts) x2 Hand Holder Tool (making holes, die cut) Crosscutting Tool - Buying directly from the manufacturer EMproject89 - The machine was inspected, serviced, refurbished / a software update was carried out - The manufacturer does the installation and training - Extended warranty of 6 months - 20% discount on spare parts during the extended warranty period

Year of construction: 2016, condition: ready for operation (used), Rotor diameter: 260mm, rotor blades: 3, stator blades: 2, motor power: 7.5kW, throughput: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1600mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible. Bsdpfjubyyvsx Al Ajln