Used Metformer Prasa Krawędziowa Hydrauliczna 100T 3100 for sale (1,211)

Condition: used, Hydraulic guillotine shear, swing-beam plate shear BAYKAL Type HGL 3100 x 8 Machine No. 6882 Year of manufacture: 2003 Cutting length: 3100 mm Cutting thickness: 8 mm Backgauge: 5 mm to 1150 mm Iedoyvvkqjpfx Am Ejia Left front angle gauge: 1000 mm Working height: 820 mm Hydraulic sheet hold-downs: 17 units Hydraulic tank capacity: 140 liters (HLP 46) Drive power: 18.5 kW Electrical connection: 400 Volt, 50 Hz - Motorized backgauge with ELGO positioning control Type P9521, with digital position display - Backgauge lift-out at 1185 mm - Single and continuous stroke modes - Left angle gauge 1000 mm - 2 material support arms, each 1000 mm - 17 hydraulic sheet hold-downs - Manual blade gap adjustment - Cutting line illumination - Electric foot switch with emergency stop, free-standing - Finger guard on left side, 1100 mm, foldable, electrically monitored - Safety guard with light barrier at the rear in the backgauge area - 3088 operating hours read off Space required (without sheet supports) L x W x H: 3900 x 2460 x 1660 mm Machine depth with sheet supports: 2930 mm Weight: 6.3 tons In good condition

Condition: good (used), functionality: fully functional, 2.5 HP motor, max. cutting height approx. 45 mm, saw blade diameter approx. 180 mm, depth to fence approx. 500-530 mm, fitted with extraction unit, rear fence table, support consoles/support table, pneumatic pressure bar / workpiece clamping, ex location. Shipping available at extra cost! Iisdpfx Asyu Sl Tem Esa

Condition: used, Year of construction: 1989, sheet length: 3.100sheet thickness: 8,0cutting area width: 3100total power requirements: 11weight approx.: 7500messurements (LxWxH): 4180 x 2150 x 2000 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Iisdporu Un Hefx Am Eea Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 22,000 W, spindle speed (max.): 3,000 rpm, travel distance X-axis: 293 mm, travel distance Y-axis: 130 mm, travel distance Z-axis: 1,350 mm, total height: 2,315 mm, total width: 2,067 mm, overall weight: 8,000 kg, controller manufacturer: FANUC, controller model: 0i-F, product length (max.): 4,530 mm, number of axes: 4, This 4-axis DN SOLUTIONS 3100 LY turn-mill centre was manufactured in 2023. It features a maximum turning diameter of 420 mm and a turning length of 1285 mm. The machine is equipped with a 12-inch main spindle chuck and a rapid traverse speed of 30 m/min in both X and Y axes. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS 3100 LY machine we have for sale. Contact us for further details. • Main spindle chuck size: 12 in (306 mm) • Bar capacity: 102 mm • Rapid traverse: X 30 m/min; Y 30 m/min; Z 10 m/min • Max turning diameter: 420 mm • Max turning length: 1285 mm • Driven tool speed: 5000 rpm • Tooling: 12 stations, BMT65 • Guideway type: Box guideways • Axes/features: C-axis, Y-axis • Electrical: 380 V, 3-phase, 50/60 Hz • Electrical ratings: 55.02 kVA; Full load current 83.60 A; Short circuit capacity 10 kA; Interrupting capacity 5 kA Additional equipment • Optional: • 1 pc. External turning tool post BMT65 25x25 single left, right (500-0679) • 3 pcs. External turning tool post R/L high (500-6960) Iedjyu Rn Topfx Am Esia • 1 pc. Facing tool post BMT65P/SQ 25 mm (500-0834) • 3 pcs. Boring bar holders (ID: 50 mm) BMT65P (500-5555) • 1 pc. IK cover (500-0837) • 1 pc. Reducing sleeve set • 1 pc. Reducing sleeve set (500-0808) • 1 pc. Adapter set PRECI-FLEX Er32 (BMT 65P) (500-0500) • 12 pcs. Covers BMT 65 (500-1931) • 2 angled externally cooled Eppinger AGWs • 2 straight externally cooled Eppinger AGWs • Chip conveyor (hinge belt conveyor). Price on request • Machine is delivered with standard basic package: Turret fully equipped, base holder includedMachine is a Showroom machine that never has been in production. Like new Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Technical data: Max. cutting width: 3100 mm Max. cutting capacity (steel ST45): 0.4 - 10 mm Motorized adjustable backgauge: 1000 mm NC control: OPERATOR Stroke: 160 mm Motor power: 15 kW CE marking Dimensions (L x W x H): approx. 3900 x 2200 x 2250 mm Weight: approx. 9 tons Isdpfxoyxvgqj Am Esia The seller accepts no liability for typographical or data transmission errors. The machine's visual condition, technical functionality, and wear are consistent with its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2024, functionality: fully functional, working width: 3,100 mm, distance between stands: 2,600 mm, warranty duration: 24 months, control type: CNC control, degree of automation: automatic, number of support arms: 2, type of crowning: CNC-controlled, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, safety light barrier, Immediately available, highly upgraded CNC press brake YAWEI PBH160/3100-4C - Pressing force: 1600KN - max. bending length: 3100mm - Year of construction 2024 - CNC controlled hydraulic crowning - DELEM DA66S - 4 CNC controlled axes - Y1/Y2, X, R - Mechanical quick clamping upper tools type Amada - 60mm table with 13.5mm x 22mm groove for insertion dies - 2 front support arms can be moved on linear guides - CE with Fiessler AKAS IIF (automatic height adjustment) - 24 month guarantee - Commissioning, training Iijdpfx Amjyvzhnj Eea

Condition: used, Year of construction: 1985, Cutting length: 3100 mm Cutting height: Adjustable from 0-45 mm Saw unit: Powerful three-phase motor 220/380 volts, 1.8 kW power Clamping bar at the top with a handwheel Iiedpevvkazjfx Am Eoa Storage location: Nattheim

Condition: new, pressure 175 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 120 mm/sec Iijdsxaa Eqjpfx Am Esa work stroke 265 mm dayligth 480 mm table height 900 mm table width 90.0 mm oil volume 230 ltr. voltage 400 Volt total power requirement 18.5 kW weight 10500 kg range L-W-H 4100 x 2000 x 2820 mm ALPMAC Manufacturer Video: ?v=_FxXyPAcxlE ?v=YfkX9RwWv_0 ALPMAC Product Video Model B: ?v=lmT1tfy43WE ----- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: * increased installation height * increased cylinder stroke * increased throat depth ----- ! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH-PERFORMANCE HYDRAULIC COMPONENTS (HAWE GERMANY) ! HIGH RUNNING QUIET DUE TO LOWER OPERATING PRESSURE (50-60 dB) ! INDUCTION-HARDENED & CHROME-PLATED CYLINDER PISTONS FOR CONTINUOUS USE ! ALUMINUM CAST REAR STOP COMPONENTS ! REAR STOP WITH POWERFUL DRIVE MOTOR (1.0 kW) ! MACHINE TABLE MADE OF ROBUST & DURABLE STEEL (C45) GREEN ECO Technology: Lower consumption. More quiet. Full control. ! Peak performance with minimal energy consumption ! Maximum power at minimal cost ! Maximum performance when it's really needed ! Main motor is only activated by the foot pedal ! No energy wasted in standby mode ! Controlled start-up process Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA-58T" with graphics/touchscreen * 2D graphical programming * 15" high-resolution color TFT screen * Bending sequence calculation * Product programming and real-size display * USB interface - CNC controlled axes: Y1 - Y2 - X - R - crowning - CNC electro-motorized backgauge (X-axis) * on ball screws * Travel: max. 750 mm * X-axis travel speed: 350 mm/s * with 2x manually adjustable backgauge fingers - CNC electro-motorized height adjustment (R-axis) * Travel: max. 250 mm * R-axis travel speed: 300 mm/s - CNC electro-motorized table crowning - ROLLERI Rehfuß upper tool "PS 135.85-R08", System "A" * including quick-change clamping * including crowning device in the tool holder - ROLLERI split universal die block "M 460 R" * including 1x die shoe "C 1050-R" - Rear safety device: light barrier - HAWE hydraulic components - FIESSLER AKAS laser safety device in front of the machine (incl. FPSC) - 2x front support arms with sliding system * easily and keylessly height-adjustable - FIESSLER freely movable double foot control - CE marking / Declaration of Conformity

Condition: used, Używana klaryfikująca prasa filtracyjna produkcji Seitz Orion typ OF 100/150 w wykonaniu ze stali kwasoodpornej. Prasa posiada 154 płyty filtracyjne wykonane ze stali kwasoodpornej o wymiarach 1000 mm x 1000 mm, oraz dwie płyty końcowe. Powierzchnia filtracji ok 310 m2. Zamknięcie hydrauliczne. Prasa zamontowana na ramie ze stali KO. W zestawie z maszyną przyłącza podawania, manometry i lokalny panel sterowania. Specifications: Iedpfxoyi Eyge Am Esia Material: Stainless steel Plate Size: 1000 mm x 1000 mm # of Plates: 154 stainless steel filter plates Eyes: 4 Plate Type: Clarifying Surface Area: 310 m2 Closure: Hydraulic

Condition: not inspected (used), Year of construction: 1995, functionality: unexamined, pressing force: 200 t, stroke length: 400 mm, throat depth: 250 mm, working length: 3,100 mm, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the machine within the specified period between 08.04.26 and 16.04.26! TECHNICAL DETAILS Maximum pressing force: 2000 kN / 200 t Maximum working length: 3,100 mm Maximum stroke: 400 mm Throat depth: 250 mm MACHINE DETAILS Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Rated current: 100 A Connection power: 22 kW Total connected load: 35.5 kW Dimensions & Weight Dimensions (L x W x H): 4,500 x 4,000 x 3,200 mm Machine weight: 19 t Transport width: 2,700 mm EQUIPMENT Workshop drawer cabinets Numerous punches, dies, and additional press brake tooling Operating manual Ijdeyk U Ddspfx Am Esia External reference: 17

Condition: good (used), Year of construction: 2003, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, total height: 2,800 mm, total length: 3,200 mm, total width: 2,900 mm, table width: 800 mm, table length: 1,500 mm, table load: 550 kg, rotary table diameter: 800 mm, spindle motor power: 20,000 W, Chip conveyor 3D measuring probe Paper filtration IKZ 15 Bar Under power X - Travel: 1060mm Y - Travel: 710mm Z - Travel: 710mm A - Axis: 360000° B - Axis: - 30 to + 120° Table Length: 1500mm Table Width: 800mm Isdpfsym Sdysx Am Eoia Table load: 550 Table Ø: 800mm Feed rate X-Axis: 15000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 15000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 20kW Speeds / ranges: 12000Rpm ATC / revolver: 32 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 3200mm Width: 2900mm Height: 2800mm Weight: 9500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2015, condition: excellent (used), 3 cement silos 100T with filters, installation in a mobile system Iiedpfx Amjx I D S Hj Esa

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Technical Specifications Protection Laser CNC Bending Table CNC Axes: Y1/Y2/X/R Manual Axis: Z1/Z2 Split Toolless CYBELEC CYBTOUCH 12 Graphic CN ALMOST NEW CONDITION Features Motorized Backgauge Stroke: 800 mm Working Height: 900 mm Main Motor Power: 11 kW Weight: 7900 kg Oil Capacity: 200 liters Folding Length: 3100 mm Power: 135 T Gooseneck: 400 mm Distance Between Columns: 2600 mm Sliding Stroke: 275 mm Approach/Working/Return Speeds: 200/10/120 mm/s Backstop Speed: 230 mm/sec Table slider clearance: 550 mm Table width: Iodpfsv Tz Ukjx Am Ejia 90 mm Machine dimensions L x W x H: 4250 x 2050 x 2700 mm

Condition: ready for operation (used), Year of construction: 2014, operating hours: 23,915 h, pressing force: 255 t, total height: 3,000 mm, overall weight: 15,000 kg, travel distance X-axis: 600 mm, travel distance Z-axis: 1,900 mm, product length (max.): 4,100 mm, number of axes: 5, This 5-axis Bystronic Xpert 250/3100 press brake was manufactured in 2014. It features a press force of 2500 kN, bending length of 3100 mm, and a throat depth of 400 mm. The machine includes a robust 22 kW main motor and operates with high precision. If you are looking to get high-quality bending capabilities, consider the Bystronic Xpert 250/3100 machine we have for sale. Contact us for more information about this machine. • Units available: 2x similar units • Standard stroke [S]: 265 mm • Open height [D]: 550 mm • Distance between side frames: 2750 mm • Throat depth [T]: 400 mm • Table width: 60 mm Iisdpfxjx D Dw Ss Am Eea • Max. backgauge range in X (2/4/5 axes): 1050 mm • X-axis speed (2/4/5 axes): 650 mm/s • X-axis accuracy (2/4/5 axes): +/- 0.04 mm • R-axis travel (2/4/5 axes): 250 mm • R-axis speed (2/4/5 axes): 200 mm/s • R-axis accuracy (2/4/5 axes): +/- 0.1 mm • Z-axis speed (4/5 axes): 1500 mm/s • Z-axis speed (6 axes): 1200 mm/s • Z-axis accuracy (4/5 axes): +/- 0.1 mm • Approx. max. Y-rapid traverse: 200 mm/s • Approx. max. Y-rapid traverse in High Speed*: 220 mm/s • Max. Y-working speed: 10 mm/s • Approx. max. Y-working speed in High Speed*: 20 mm/s • Approx. max. Y-working speed in High Speed for robot operation*: 20 mm/s • Y-axis accuracy: 0.004 mm • Oil capacity: 445 l • Main motor power: 22 kW • Weight: 15 t • Machine width [W]: 2050 mm Technical Specification Bending Length 3100 mm

Condition: ready for operation (used), Year of construction: 2000, operating hours: 59,827 h, pressing force: 204 t, overall weight: 16,600 kg, This HAMMERLE BM 200 - 3100 press brake was manufactured in 2000. It is a robust and reliable machine, ideal for bending applications. Consider the opportunity to buy this HAMMERLE BM 200 - 3100 press brake. Contact us for more information. Machine Benefits Ijdpfxjx D Ni Te Am Esia Qualitative Machine Benefits • The machine has a pressing force of 200 tons over a length of 3 m, which can bend a sheet thickness of up to 20 mm. However, this is all tool dependent. Right now tools for a thickness of up to 8 mm are used Technical Machine Benefits • Max. Working length: 3100 mm • Max. Stroke: 400 mm • Projection: 250 mm • Operating voltage/frequency: 400v 50hz • Control voltage: 24v dc • Connected load main motor: 22 kw • Total connected load: 32 kw • Rated current of back-up fuse: 80 a Extra Information Machine still under power

Condition: used, Year of construction: 1999, sheet width 3060 mm plate thickness 8.0 mm thickness at "Niro-steel" 6.0 mm distance between columns 3100 mm down holder 16 Stück no. of strokes max. 10 - 15 Hub/min oil volume 160 ltr. cutting angle 1.6 ° back stop - adjustable 6.0 - 750 mm Isdsxaci Eopfx Am Eoia Control ELGO P9521 total power requirement 18.5 kW weight 6300 kg range L-W-H 3900 x 2300 x 1630 mm Features: - Robust electro-hydraulic swing beam shear - ELGO digital display model P9521, for electric backgauge * Backgauge travel X = 750 mm * Backgauge-free ball screw drive * Travel speed 100 mm/s - 1x stable side stop * With T-slot, flip-stop, and millimeter scale - 2x stable front support arms - Electric cutting length limiter * Cutting length limiter to increase the stroke rate/min. - Manual cutting gap adjustment * Centrally operated on the right side stand - Front support plates - Front finger/interference guard - Inching operation with push buttons on the left control panel - Protective grille = safety device behind the machine - Operating instructions (PDF)

Condition: used, Year of construction: 2000, sheet width 3060 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3100 mm down holder 16 Stück no. of strokes 20 Hub/min oil volume 160 ltr. cutting angle 1.6 ° Control ELGO Number of working hours ~ 1.100 h total power requirement 11.0 kW weight 5250 kg range L-W-H 3800 x 1940 x 1560 mm from a maintenance workshop with only approx. 1.100 operating hours (!!) Equipment: Iiedpfx Amsxacfae Eja - electro-hydraulic swing beam shears - ELGO NC control unit * for electric back stop * Input of target/actual position value possible - NC electro-motoric back stop * travel path of back stop X = 750 mm * back stop ball screw with no play * travel speed 100 mm/sec - electric cutting length limitation * cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment, via eccentric - tip operation with push buttons on the control panel on the left - front support plates with ball rollers - front finger/interference protection - 1x side stop with T-slot & millimeter scale - 2x front support arms - original operating instructions including CE declaration

Condition: used, Year of construction: 1987, sheet length: 3.100sheet thickness: 8,0cutting area width: 3100total power requirements: 11weight approx.: 7500messurements (LxWxH): 4180 x 2150 x 2000 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Iodpfx Ajyy Tqcjm Ejia Auto-cutting (Flying cut)

Year of construction: 2005, condition: used, Hard cover book line Consisting of Year: 2005 - 2000 - 1999 Book block feeder Solema Autoload Ijdpfx Asyi Emyem Eeia Year: 2000 Nipping machine Sigloch NHG-60 1 Year: 1999 Description: - Pressing station End sheet tipping machine Sigloch VAM Year: 2005 Description: - Cold glue: HHS - End sheet tipping: 2x Book back gluing machine Sigloch SB 3100/2 Year: 2005 Description: - Cold glue spine gluing - Intermediate drying station (infrared) - Cold glue spine gluing - Back lining station - Transport system, length (approx): 60 mtr Nipping & smashing machine Sigloch DNH Year: 2005 Description: - 2 pressing stations

Condition: good (used), machine/vehicle number: 2956, total length: 12,670 mm, total width: 2,600 mm, Year of construction: 2023, operation weight: 7,600 kg, load capacity: 100,000 kg, Seacom RT40-100T from Uniktruck Iiodpfxjyuhzwj Am Eea

Condition: good (used), machine/vehicle number: 2955, total length: 12,670 mm, total width: 2,600 mm, Year of construction: 2023, operation weight: 7,600 kg, load capacity: 100,000 kg, Seacom RT40-100T from Uniktruck Isdpfjyuhzqjx Am Esia

Condition: good (used), machine/vehicle number: 2954, total length: 12,670 mm, total width: 2,600 mm, Year of construction: 2023, operation weight: 7,600 kg, load capacity: 100,000 kg, Seacom RT40-100T from Uniktruck Ijdeyuhzkjpfx Am Eeia

Condition: good (used), machine/vehicle number: 2953, total length: 12,670 mm, total width: 2,600 mm, Year of construction: 2023, operation weight: 7,600 kg, load capacity: 100,000 kg, Seacom RT40-100T from Uniktruck Iedpfsyuhzdjx Am Esia

Condition: good (used), machine/vehicle number: 2951, total length: 12,670 mm, total width: 2,600 mm, Year of construction: 2023, operation weight: 7,600 kg, load capacity: 100,000 kg, Seacom RT40-100T from Uniktruck Iodpfx Ameyuhy Te Eeia

Condition: good (used), machine/vehicle number: 2950, total length: 12,670 mm, total width: 2,600 mm, Year of construction: 2023, operation weight: 7,600 kg, load capacity: 100,000 kg, Seacom RT40-100T from Uniktruck Iodsyuhy Hjpfx Am Esia