Used Micrometers, 6 Pieces for sale (56,328)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, control type: manual, sheet thickness (max.): 6 mm, Equipment: emergency stop, finger protection, foot remote control, Techna – Fab Swing Beam Guillotine Kjdpfjzv Tzkox Aqisnb Model: QC12Y-6 x 3200mm Year: 2007 Max. Cutting Length: 3200mm Max. Cutting thickness: 6mm Machine with: Power Back Gauge Squaring Arm Front Supports

Condition: used, Year of construction: 2026, Special price – demonstration machine, Garbsen. Our WL 6 machine concept. The Weima high-performance shredder, with its flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into wood chips, achieving a significant volume reduction of the material, especially with bulky materials. Mode of operation: The machine is equipped with a large feed hopper and can be loaded via a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without requiring manual assistance. The hydraulically controlled slide feeds the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependent controlled. The internal slide guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are cardanically suspended to avoid transverse forces on the piston seals. The patented and profiled V-rotor, made of solid steel, has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concave, aggressive, and four-way rotatable knives/cutting crowns are located in milled knife pockets on special knife carriers. This patented system guarantees, through the resulting reduction in the cutting gap between the counter-knife and the rotor, a high throughput, low energy consumption, and an optimal discharge of the shredded material. The screen located under the rotor determines the chip size (10 - 100 mm). An optionally available, hydraulically opening screen basket is also available. The power transmission from the electric motors is via V-belts to a heavily dimensioned gearbox, which is attached to the rotor shaft on one side. Precise cutting at high throughput with a profiled V-rotor. The V-rotor, developed specifically by WEIMA, is universally applicable and made of solid material. Its aggressive material feed, with up to two knife rows, guarantees a high throughput with low power consumption. It can be equipped with hardened cutting knives made of steel with edge lengths of 30 mm and 40 mm. These can be repeatedly rotated when worn, which drastically reduces maintenance costs. Intuitive operation thanks to a Siemens PLC control with a touch display. To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. In doing so, we use only high-quality components – for example, from Siemens or Rittal. Intuitively operable touch screens guarantee quick adjustments. Functions such as adjusting the slide timing or stop ensure a high throughput. The built-in overload protection also prevents damage to the machine. Technical specifications WL 6: Feed opening 800 x 1,250 mm. Hopper capacity 0.9 m³. Rotor length 800 mm. Rotor diameter 256 mm. Drive power 22 kW. Rotor speed 90 rpm. Max. number of knives 42 pieces. Type and size of knives: concave / 40 x 40 mm, cutting crowns. Screen size 10-60 mm. Paint: WEIMA standard RAL 2022 / 7016. Connection value 400 V +/- 5% / 50 Hz. Weight approx. 1,600 kg. Including: - Control cabinet* (Rittal) incl. electrical control (Moeller / Siemens) and S Kodpfjy D E Tdsx Aqienb

Condition: good (used), Screws, grub screws, for Bosch profile, construction profile, aluminum profile, aluminum T-slot profile, T-nut - Grub screws: Hex socket set screws with pin, 30 pieces Knjdpjymbixsfx Aqijb -Thread: M12 left -Price/Quantity: 30 pieces -Price: 6 euros net for 30 pieces -Number: 4000 pieces in total -Transport dimensions: 600/400/H200 mm -Weight: 58 kg

Condition: used, Year of construction: 2017, Excellent opportunity to acquire a well-maintained Bystronic BySprint Fiber 4020, equipped with a 6 kW fiber laser source and ByTrans Extended automatic loading and unloading system. Machine Highlights - Year of manufacture: 2017 Knsdpozw Nfnefx Aqisb - Laser power: 6 kW Fiber - Cutting hours: Approx. 2,539 hours - Working area: 4,000 x 2,000 mm - Automatic loading/unloading: ByTrans Extended - Control system: ByVision with 22" touchscreen - Dual shuttle table system for maximum productivity Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! * Year of manufacture: 2017 * Laser power: 6 kW Fiber * Cutting hours: Approx. 2,539 hours * Working area: 4,000 x 2,000 mm * Automatic loading/unloading: ByTrans Extended * Control system: ByVision with 22" touchscreen

Condition: used, Hydraulic guillotine shears SAGITA - MANURHIN - License BEYELER Type 2550 x 6 Machine. No. 00682 Year of construction 1980 Cutting length 2520 mm Cutting thickness 6 mm Backgauge 750 mm Cutting angle adjustable Hydraulic pressure max. 290 bar Motor power 11 kW Mains connection 400 Volt, 50 Hz - Back gauge with motorized adjustment and mechanical actual value display, fine positioning via handwheel - Manual cutting gap adjustment - Infinitely variable cutting length adjustment - 11 pieces hydraulic sheet metal hold-down device - front angle fence left 1300 mm - 3 front table extensions 1300 mm - electric foot switch - very solid and torsion-resistant welded construction - 1 set of replacement blades - slightly damaged (blade length 2550 mm) - operating instructions Space requirement with table supports L x W x H 3200 x 2800 x 1600 mm Space required for transportation L x W x H 3200 x 2150 x 1600 mm Weight 6300 kg Kjdpfx Aqot Ac D Usijnb Good condition

Condition: excellent (used), Year of construction: 2021, overall weight: 8,000 kg, total height: 300 mm, total length: 6,000 mm, total width: 2,000 mm, Make: STOLLE Type: TDG 6/2 Year: 2021 Floorplate Length: 6000mm Floorplate Width: 2000mm Height: 300mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Weight a plate approx.: 6000kg Number of matching pieces: 1 Length: 6000mm Width: 2000mm Height: 300mm Knjdpfx Ajxf Exgsqisb Weight: 8000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Mitutoyo Height Master 515-318 Height Micrometer Height Master 515-318 Height Micrometer Measuring range 10-310 mm Reading marks in 0.001 mm increments Quantity: 1 piece For calibrating and adjusting height gauges and marking devices, for example. Mitutoyo supplies a double-block height micrometer with a counter that makes reading faster, easier, and more accurate. The Height Master's gauge block is arranged in two rows, one on the left and one on the right, each with a height interval of 20 mm. Manufacturer price: €4,170 Kjdpju Egyyjfx Aqijnb Find more items - new and used - in our shop! International shipping costs upon request!

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 265134, warranty duration: 6 months, year of last overhaul: 2026, Equipment: type plate available, Multimatic MUS 6 WP Bakery Divider. Fully automatic machine for dividing and rounding dough. Designed for doughs with a yield (TA) of 148-160. Key features: - Capacity: up to 12,000 pieces/hour, Ksdpfxsuv Hrwe Aqisnb - Weight range: 28 - 85 g, - Number of rows: 6, - Hydraulic system for the main piston, - Condition: as new (after complete overhaul), - Hopper volume: 50 l, - Round product, - Constructed of stainless steel.

Condition: good (used), Year of construction: 2016, machine/vehicle number: 0000087, functionality: fully functional, operating hours: 2,202 h, power: 8,000 kW (10,876.96 HP), input voltage: 400 V, input current: 18 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,550 mm, total length: 4,100 mm, total width: 780 mm, overall weight: 990 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Preliminary milling unit Edge banding glue station Capability to glue up to 60mm Feed rate 11m per min Control panel with temperature setting Trimming of edge banding from a roll Guillotine for trimming edge banding from a roll Top/bottom milling unit with profiled milling cutters Polishing unit Kodpfx Aqjzzcc Ieionb Year of manufacture 2016 Excellent condition

Condition: used, mileage: 248,648 km, power: 103 kW (140.04 HP), first registration: 10/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 6, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, INTERNAL VEHICLE NUMBER: M640----VW CRAFTER 2.0 TDI 6 SEATS----KM: 248,648, MAINTAINED ACCORDING TO SERVICE SCHEDULE LAST OIL CHANGE AT 226,006 KM ON 10/2025 ALL INSPECTIONS WERE CARRIED OUT BY AN AUTHORIZED MANUFACTURER'S WORKSHOP. THE VEHICLE HISTORY IS AVAILABLE IN DIGITAL FORM. ----* ADAPTIVE CRUISE CONTROL (ACC) * CRUISE CONTROL * SPEED LIMITER * AUTOMATIC HEADLIGHT ADJUSTMENT * BRAKE ASSIST * START/STOP SYSTEM * LANE KEEPING ASSIST * BLIND SPOT MONITOR * HILL START ASSIST * SIDE WIND ASSIST * REARVIEW CAMERA * CLIMATE CONTROL * PARKING SENSORS FRONT+REAR ----270° REAR DOORS----6 SEATS----WHEELCHAIR RAMP FROM AMF BRUNS----ELECTRICALLY EXTENDABLE STEP ON THE RIGHT-HAND SIDE SLIDING DOOR----HEATED SEATS----HEADLIGHT CLEANING SYSTEM ----FOG LIGHTS----CORNERING LIGHTS----AUXILIARY HEATER----FRONT WINDSHIELD HEATING----TAXI METER----HEAT EXCHANGER AND EVAPORATOR----* MULTIFUNCTION STEERING WHEEL * ELECTRICALLY ADJUSTABLE AND HEATED EXTERIOR MIRRORS + FOLDING IN/OUT * ELECTRIC WINDOWS * ADJUSTABLE SEATS IN THE CARGO AREA * ONBOARD COMPUTER * USB-C * LUMBAR SUPPORT * APPLE CARPLAY * ANDROID AUTO * MULTI-CD CHANGER * BLUETOOTH HANDS-FREE SYSTEM * SD CARD * MINI-SD CARD * 12V SOCKET * PASSENGER SEAT CAN BE FOLDED DOWN AS A TABLE * HEATED REAR WINDOW * ROOF WITH STORAGE COMPARTMENT * LED LIGHTING DRIVER+CARGO AREA ----Special Equipment: * 2nd Battery with Battery Monitoring * Airbag Driver/Passenger Side * Passenger Airbag Deactivatable * Audio Navigation System Discover Media Streaming & Internet (Touchscreen, USB) * Voice Control System * Multimedia Interface 2 x USB (Type C) Front * Mobile Phone Interface Bluetooth * Mobile Online Services App-Connect Wired and Wireless * Glove Compartment Lockable * Exterior Mirrors Electrically Adjustable, Heated and Folding * Roof Headliner * Driving Assistance Package 2 * Steering Wheel with Multifunction * Driving Assistance System: Parking Assist Front and Rear with Active Flank Protection * Driving Assistance System: Parking Assist Front and Rear * Driving Assistance System: Parking Exit Assistant * Climatronic Climate Control System (Cab) with 2nd Heat Exchanger and 2nd Evaporator * Auxiliary Heater (Air), Winter Tires Additional (Customer Information Required) * Heat Exchanger and Evaporator Additional * Heat Exchanger Additional Additional Equipment: * Exterior Mirror Convex Left * Exterior Mirror Convex Right * Turn Signal LED Integrated in Exterior Mirror * Floor Covering in Cab: Rubber * Aerodynamic Underbody Paneling * Double Headlights * Remote Control (2) Folding * Grab Handles A-Pillars * Interior Lights in Cab: LED * Interior Lights in Cargo/Passenger Compartment: LED * Body/Construction: Box Van High Roof Standard * Body Variant: High Roof in Vehicle Color * Fuel Tank: 75 L * Radiator Grille with Chrome Strip on Top * Steering Column (Steering Wheel) Adjustable * Headlight Range Adjustment Kedpfx Aqozwzxasijnb * Truck Approval * Engine 2.0 Ltr. 103 kW TDI * Multifunction Display Plus * Rear Fog Light * Wheelbase 3640 mm * Tire Repair Kit * Low Emission according to Emission Standard Euro 6d-TEMP * Seat Cover/Upholstery: Fabric * Steel Rims 6.5x16 * Start/Stop System Engine * Sockets (12V connection) in Cab (2 pieces) * Front Bumper in Gray * Lashing Eyes Cargo Area * Warning System for Safety Belt (Driver Side) * Heat-Insulating Glass * Permissible Total Weight 3.50 t ----On request, we can retrofit the vehicle with a trailer coupling. Professional installation - quick and

Condition: good (used), Year of construction: 1973, functionality: fully functional, pressing force: 1,250 t, stroke length: 220 mm, table width: 260 mm, table length: 820 mm, throat depth: 700 mm, total length: 6,400 mm, total width: 4,365 mm, total height: 3,760 mm, overall weight: 135,000 kg, operating pressure: 7 bar, pressure: 7 bar, Upset slide nominal force: 12 500 kN /1 250 ton/ Maximal diameter of work piece: 140 mm Maximal diameter of upset flange: 180 mm Upset slide stroke: 460 mm Slide continuous idle strokes in minute: 35 Electric motor power: 75 kW Overall dimensions: - L-R: 6 400 mm - F-B: 4 3650 mm - Height: 3 760 mm Total weight, circa: 135 000 kg. Kedpfouby N Dex Aqienb

Condition: good (used), Offer 35503 Knsdpfx Aqszi S S Ujisb Technical Data: - 6 pieces of roller-bearing drawers, extendable up to 90% - Drawer size each approx. W 450 x D 530 mm - Drawer heights: 3 x H 85; 2 x H 130; 1 x H 180 mm - No key available - Cabinet space requirement approx. W 540 x D 630 x H 1000 mm - Weight 80 kg

Condition: like new (used), Year of construction: 2002, machine/vehicle number: 54, functionality: fully functional, pressing force: 60 t, table width: 1,100 mm, table length: 3,000 mm, The machine is in like-new condition! Submitting a bid obligates you to pick up the machine on the following dates: Monday, October 5, 2026, Tuesday, October 6, 2026, Wednesday, October 7, 2026, and Thursday, October 8, 2026, until 12:00 PM. The machine is already in storage. TECHNICAL DETAILS Punching force: 60 t Table size: 1,100 × 3,000 mm EQUIPMENT Setup operation Automatic operation Continuous operation Wiring diagrams Knodjzzny Sepfx Aqijb Operating manual

Condition: used, mileage: 430,000 km, power: 375 kW (509.86 HP), first registration: 07/2022, fuel type: diesel, axle configuration: 2 axles, color: silver, gearing type: automatic, Equipment: air conditioning, navigation system, parking heater, Version FH4/Globetrotter "New Version"/ (ADR) with the following equipment: complete equipment 13L 510 hp version, Euro 6e, VEB+ engine brake with 510 hp, I-Shift transmission 12 gears + 2, differential lock, rear axle ratio 2.47:1, front axle 8 tons/rear axle 13 tons max. weight, rear axle air suspension, Globetrotter cab (2 beds) with Driver Comfort+ and Driver Relax 2+ equipment, radio/CD with 4x35W, USB+iPod connection, 80 dBA low noise, disc brakes with EBS/TCS, folding glass sunroof, 33L refrigerator, diesel auxiliary heater, folding table, batteries 210 Ah/alternator 150A, 770L aluminum tank on the left, lockable fuel tank cap, 6 tires front 385/55 and rear 315/70 R 22.5, approximately 70% tread, three-piece fender. Cab interior: textile, dashboard decor, 12V/24V socket, fuel filter heater, sun visor, roof and side spoilers, fog lights and long-range headlights, SAF SKS fifth wheel coupling 36.20 W, SVM 575mm, air compressor 900L/min, leather steering wheel and leather armrests, upper sleeper bed foldable, ADR package with fire extinguisher, dual battery system (gel), LED headlights, auxiliary air conditioning, chrome trim, navigation system, etc. Kedpfx Ajzr Tcmoqionb incl. combined hydraulics for semi-trailers and tipping trailers 150/250 bar with 2 hydraulic lines before and after the fifth wheel coupling, optionally with 200L tank. without hydraulic system Euro... -1,000,- plus VAT. Offer and images are subject to change.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Complete craft beer bottling line: Cime Careddu GOLD DPS 6/6/1 rotary triblock (rinser – isobaric filler with double pre-evacuation – crown capper) and matching Compatta self-adhesive labeler. Both manufactured in 2018, installed in 2019 by Coenco (official Cime Careddu agent for the Benelux), professionally maintained, with low operating hours. Available immediately from a brewery in Dokkum, the Netherlands, due to production shutdown. 1. Triblock – Cime Careddu GOLD DPS 6/6/1 CROWN Type: rotary triblock (rinser – isobaric filler – crown capper) in stainless steel Knodpfxszza Rie Aqieb Year of manufacture: 2018 (serial no. 708) Rinser: 6 grippers, water rinse Filler: 6 isobaric (counter-pressure) filling valves with double pre-evacuation (DPS) and CO₂ pressurization for low dissolved oxygen Capper: 1 head for 26 mm crown caps, with crown feeder Capacity: approx. 1,000–1,200 bottles/hour (33 cl) Bottle formats included: [e.g. 33 cl longneck Ø 60 mm, 33 cl Steinie Ø 69 mm, 75 cl Ø 85 mm – fill in] CIP: cleaning-in-place connections for internal and external sterilization Electrical: 400 V / 50 Hz / 3-phase + N Operating hours: approx. [xxx] hours (approx. [xxx,xxx] bottles filled) CE certified, safety guarding fitted 2. Labeler – Cime Careddu / ENOS Compatta Type: linear self-adhesive labeling machine, one label station (front or wrap-around label) Year of manufacture: 2018 (serial no. 720) Capacity: up to approx. 1,800 bottles/hour Electrical: 400 V / 50 Hz / 3-phase + N Manual station adjustment, suitable for round bottles from 25 to 75 cl

Condition: good (used), Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 6 mm Kedewy N Spjpfx Aqionb -Inside: Ø 80 mm -Bolt circle: Ø120 x 22 mm -Number of teeth: 132 teeth -Number: 11x saw blades available -Price: per piece -Weight: 10.7 kg

Year of construction: 2012, condition: excellent (used), Rotor brake, disc brake, electro-hydraulic disc brake, crane brake, disc, drum and storm brakes, overhead crane brake -Manufacturer: Pintsch Bubenzer, rotor brake disc brake unused -Type: SB 23-450x30-80/6 -Braking torque: 1850 Nm -Accessories: incl. 3 sets of replacement burners -Quantity: 2 pieces brake available -Price: per piece Knodsv Hbk Eepfx Aqijb -Dimensions: 370/330/H650 mm -Total weight: 105.7 kg/pc.

Condition: good (used), functionality: fully functional, Year of construction: 2008, Well-maintained, used plate shear from LVD. Type CS 3100 / 6 Capacity: 3100 x 6 mm Electrically adjustable back gauge and cutting angle Manually adjustable shear gap Knsdpfsz Dwtqex Aqisb Rear safety guard

Condition: good (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 122278, type of input current: AC, conveyor belt width: 650 mm, total width: 1,100 mm, total height: 1,900 mm, total length: 1,800 mm, overall weight: 400 kg, input voltage: 240 V, working height: 800 mm, input current: 3 A, compressed air connection: 6 bar, conveyor belt thickness: 2 mm, outer diameter: 450 mm, input frequency: 60 Hz, inner diameter: 200 mm, control voltage: 24 V, year of last overhaul: 2022, space requirement height: 2,100 mm, space requirement length: 2,300 mm, space requirement width: 1,600 mm, MOSCA SoniXs TR-6 Pro Strapping Machine | Year of manufacture 2022 | Good condition For sale is a high-quality automatic strapping machine from the German brand manufacturer MOSCA, model SoniXs TR-6 Pro. The machine dates back to 2022 and is in good used condition. It is ideally suited for professional use in production, shipping, logistics, warehousing and packaging. The MOSCA SoniXs series uses modern ultrasonic sealing technology and is designed for reliable and efficient strapping processes. The original new price was approximately €40,000. Technical data according to the nameplate: Manufacturer: MOSCA GmbH Model / Type: SoniXs TR-6 Pro Machine type: Strapping machine Year of manufacture: 2022 Machine number: 1322278 Power supply: 1L + N + PE Frequency: 50–60 Hz Voltage: 100–240 V Current consumption: 3.00–1.25 A Maximum fuse rating: 13 A Frame internal dimensions: 1000 mm x 1000 mm Condition: used, good Condition and inspection The machine shows the usual signs of wear for a used industrial machine. The exact scope of delivery and the optical condition can be seen in the pictures. An inspection and functional test after prior arrangement is expressly desired. Logistics and transport Collection: Preferred. Loading/transport: Loading or organization of transport can be arranged. Price and legal information Price: 16,000 EURO negotiable plus legal VAT. Invoice: You will receive a proper invoice with VAT shown. Terms of sale: Sale exclusively to commercial customers (B2B) with exclusion of any warranty and guarantee. If you are interested or have any questions, please send us a message. We will gladly arrange an inspection appointment. Knodpfx Aqsztc S Hjiob

Condition: used, Year of construction: 2011, operating hours: 5,051 h, functionality: fully functional, machine/vehicle number: 20, travel distance X-axis: 730 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 800 mm, controller model: PRO 5, spindle speed (max.): 12,000 rpm, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, Makino A61nx, 4-axis horizontal machining center, fully functional and can be inspected while powered on. 11,324 hours of power-on time 5,051 hours of operating/runtime 3,253 hours of machining time 4,188 hours of spindle runtime A Travels  X-axis travel (frame) ..... 730 mm  Y-axis travel (spindle) ..... 650 mm  Z-axis travel (table) ..... 800 mm  Distance from pallet surface to spindle center ..... 80 ~ 730 mm  Distance from pallet center to spindle nose ..... 100 ~ 900 mm  Linear guides, heavy-duty design, size (roller bearing) ..... #55  Size of ball screws (X, Y-axis / Z-axis) ..... #45 / #50 B NC rotary table (DD motor) C1 Spindle 14,000 rpm (240 Nm)  Tool holder ..... HSK-A63 D Feed drives  Rapid traverse speed ..... 60,000 mm/min  Feed speed ..... 1 ~ 50,000 mm/min  Feed speed (jog mode) ..... 1 ~ 8,000 mm/min Tool magazine  Storage capacity ..... 60 tools  Maximum tool diameter with space allocation ..... 170 mm  Maximum tool diameter without restrictions ..... 70 mm  Maximum tool length ..... 510 mm  Maximum tool weight ..... 12 kg Tool change time increases for tool weights over 8 kg.  Maximum imbalance relative to the gripper groove ..... 11.7 Nm  Maximum total weight of all tools in the magazine ..... 180 kg  Tool-to-tool change time (without door movement) ..... 0.9 s Knedpfezw Dzdox Aqieb  Chip-to-chip time (ISO method) ..... 2.8 s  Tool ready time in the magazine (min./max.) ..... 3.1 / 6.1 s Drives  Main drive ..... AC15 kW  Feed drives (XYZ axes) ..... AC4 kW  Table (indexing table) ..... AC0.9 kW

Year of construction: 2017, operating hours: 100 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 7250, For sale: OctoFrost 6/2RH freezing tunnel – practically new, available immediately! Are you looking for a solution to quickly increase production capacity without waiting months for a new machine? We have a unique offer for you. We offer an OctoFrost 6/2RH freezing tunnel – an extended version, which has only operated for 100 hours. The unit is in practically factory condition, has been professionally disassembled, is located in our warehouse, and is ready for immediate installation. Technical parameters: ✅ Manufacturer: OctoFrost ✅ Model: 6/2RH ✅ Version: extended ✅ Dimensions: 7100 × 3000 × 3000 mm ✅ Operating time: only 100 operating hours ✅ Refrigerant: ammonia (NH₃) ✅ Refrigeration system: pump system Product Performance Peas up to 3,600 kg/h Corn up to 3,200 kg/h Green beans up to 3,000 kg/h Carrots (diced) up to 3,000 kg/h Broccoli up to 2,700 kg/h Cauliflower up to 2,500 kg/h Strawberries up to 2,520 kg/h Raspberries up to 2,000 kg/h Blueberries up to 2,700 kg/h Cherries up to 2,600 kg/h Peppers (diced) up to 2,500 kg/h Mushrooms up to 2,600 kg/h Potatoes/fries up to 1,800 kg/h Meat (20 mm cubes) up to 2,340 kg/h Fish/seafood up to 2,300–2,500 kg/h Shrimp up to 2,300 kg/h Kodpjzucihofx Aqionb The price includes a complete set: ✔ OctoFrost 6/2RH freezing tunnel ✔ Feeder ✔ Vibrator ✔ AUMA Somas valve station ✔ Control cabinet 💶 Price: 320,000 EUR – a complete, ready-to-install solution. Why is it worth it? ✔ practically new machine at a price significantly lower than a new device, ✔ immediate availability – without a long waiting time for production, ✔ proven OctoFrost technology, valued worldwide for its high IQF freezing quality, gentle handling of the product, and reliability, ✔ ideal solution for facilities planning to increase production capacity or modernize their lines. 🔧 We provide a start-up guarantee. Additionally, we offer the possibility of comprehensive connection, commissioning, and technical support by our company, NGS Serwis. This way, you receive not only the equipment but also professional installation and the assurance of trouble-free production start-up. If you are looking for a premium-class IQF tunnel that is practically new, fully equipped, and available immediately, this offer is a unique opportunity. Please contact us via private message or email to obtain a detailed specification, additional photos, and to arrange a demonstration of the equipment.

Condition: reconditioned (used), Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm control Weinig, PC-Nexus Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and completely checked before delivery Ksdpfx Ajvu Hfqsqisnb Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, infinitely adjustable horizontally > Number of tools: 1 piece > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser aiming light for detecting the saw section > NC length stop, mounted on slot table included Positioning of the cross-cut saw integrated in the control system. > Length 3500 mm Item 2: tenoning spindle ----- > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (synchronous spindle and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool flight circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??synchronous spindle), Rung support bar from above in the area of ??profile milling unit vertical right and profiling spindle. Pos. 5: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions using pneumatic turret > Radial adjustment range 125 mm, 8 positions using pneumatic turret Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions using pneumatic turret > Radial adjustment range 100 mm, 8 positions using pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool flight circle: 210 mm > Motor power: 3.0 kW Other features ----- > online-capable > rebating device for tear-free rebating > double parts package > return conveyor for 1-man operation: tilting belt > screen control > inclined window device > electronic angle display for inclined windows > industrial PC, PC control/NEXUS > Weinig type production program > without processing tools No original images available yet. Images show identical machines from our archive. ----- Price of the above-mentioned machine upon request! ----- Optional with additional charge: EUR 6.500,00 Note on used tools: We currently have used...

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, laser power: 3,200 W, sheet thickness (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Combined punching/laser operation: 3,000 mm × 1,500 mm Punching operation: 3,000 mm × 1,500 mm Laser operation: 3,000 mm × 1,500 mm Working area without repositioning: Large format Sheet metal thickness, structural steel max.: 8 mm Sheet metal thickness, stainless steel max.: 8 mm Sheet metal thickness, aluminum max.: 4 mm Maximum punching force: 220 kN Maximum punching speed (at 1 mm stroke): 900 strokes/min Maximum marking speed: approx. 2,800 strokes/min Maximum axis speed: 108 m/min Axis speed: simultaneous in X and Y axes Tool magazine: Linear magazine with multi-tools Maximum number of multi-tools: 18 Clamps: 3 Tool positions: 180 MACHINE DETAILS Knodpjzyay Isfx Aqiob Laser source: Trumpf TruFlow 3200 CO₂ laser Laser power: 3,200 W Operating hours (as shown in the photo) Beam on hours: 12,716 h Laser on hours: 73,705 h EQUIPMENT SheetMaster with two large-format tables Automatic scrap sheet disposal onto lifting table

Condition: good (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, roller milling cutter, milling cutter, hob cutter, spline shaft hob cutter -Manufacturer: WMW PWS, 17 hob cutters -Hole: Ø 27 mm 4 pieces, Ø 32 mm 7 pieces, Ø 40 mm 6 pieces Kodpfxegd Uv Dj Aqionb -Different types: see photos, more pictures can be sent -Price: complete -Dimensions: 400/400/H150 mm -Total weight: 52.5 kg

Condition: used, Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm -Inside: Ø 50 mm -Hole circle: Ø 100 x 17 mm -Number of teeth: 160 teeth -Number: 8x saw blades available Ksdpfxogiiwxs Aqionb -Price: per piece -Weight: 6 kg/piece