Used Microstep Plasma Cutter for sale (3,179)

Year of construction: 2012, condition: used, functionality: fully functional, The temperature control unit from Plasma, model "Primus", is available for sale with the following technical specifications: Medium: water, Maximum temperature: 150°C, Heating capacity: 9 kW, Cooling capacity: 30 kW, Special equipment: reinforced pump K6 at 60 l/min up to max. 6 bar. The pressure booster pump is used to increase the cooling water pressure during filling; this is necessary if the system pressure is higher than the cooling water pressure. PT 100 sensor. Interface: On/Off, Alarm, PT 100, Temperature monitoring. Gsdpfx Agex Eg T Espoit

Condition: used, Year of construction: 2011, functionality: fully functional, For sale: 4 temperature control units by Plasma: Medium: water Temperature: max. 90°C Heating capacity: 9 kW Cooling capacity: 30 kW Alarm function Flow measurement Automatic water change function PT 100 sensor Interface for TTY 20 mA via 9-pin D-Sub connector Gjdex Ek Rdepfx Agpeit

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Series: GS-CEH Gijdpfx Aowxar Djgpot Type: Exchange table, full protection, full protection exchange table Laser power: 3KW, 6KW.12KW, 15KW, 20KW Standard hardware: Scrap car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, rear lift light-blocking door, beam light curtain, partition dust removal Optional hardware: Fire bricks, high-pressure proportional valve (standard above 6KW), safety door lock, independent laser cabinet, rear exchange table light curtain, rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, light-blocking rubber strip Optional functions: FDA configuration CSA configuration, TUV configuration conventional CE configuration

Condition: new, functionality: fully functional, Year of construction: 2025, table width: 4,120 mm, working width: 2,530 mm, travel distance Y-axis: 6,020 mm, travel distance Z-axis: 450 mm, type of input current: three-phase, overall weight: 14,200 kg, warranty duration: 24 months, working range: 6,225 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, All New Full Cover Fiber Laser Cutting Machine | GS-CE PRO Series | 6000-40000W MACHINE AVAILABLE ON HAND This GS-CE series FULL COVER FIBER LASER CUTTING MACHINE offers maximum safety for metals cutting. Thanks to its full cover structure and protective glass observation window, you can observe the operation and avoid hazards such as laser radiation, sparks, etc. It also has a fast exchange table, and the exchange is within 10s. It will be your ideal solution for safe and efficient metal cutting! Working platform size: 3000mm*1500mm, 4000mm*2000mm, 6000mm*2000mm, 6000mm*2500mm;8000mm*2500mm;12000mm*2500mm; Laser power 6KW-40KW GS-6225CE PRO Max. Acceleration：3G Intelligent anti-collision function Automatic lubrication Laser fault alarm Cooling fault alarm Laser protection glass Water cooler TÜV CE certificate Optional function: automatic loading and unloading system Control unit supports graphic formats: AI, BMP, Dst, Dwg, DXF, DXP Gsdpfxevzwh No Agpjit External programming System complete incl. cooler, extraction system and safety light barriers Demonstration machine as good as new

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, actuation type: electric, laser type: fiber laser, laser power: 12,000 W, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Equipment model: NS56FG Maximum tubelength: Gedpfx Agsww Umaepjit

Condition: ready for operation (used), Year of construction: 2011, This MicroStep EasyCut 6001.25PrGB was manufactured in 2011. It is a CNC plasma/oxyfuel cutting machine designed for industrial, heavy-duty applications. Features include a large working area of 6000 × 2500 mm, dual-side driven gantry, and compatibility with CAM software like mCAM and AsperWin. It supports up to 6 oxyfuel torches and offers options like automatic height control. Note: the gas console is defective. Contact us for more information about this machine. Application Types Cutting Gjdpfx Aex D Hz Hjgpjit

Condition: used, Year of construction: 2020, functionality: fully functional, type of input current: three-phase, working range: 9,000 mm, sheet thickness (max.): 100 mm, overall weight: 1,100 kg, input voltage: 400 V, total width: 3,500 mm, cutting current: 154 A, input frequency: 50 Hz, We are offering this used MicroStep 9001.35P plasma cutting machine, year 2020. Type: MasterCut Model: 9001.35P Serial No.: 2815 Year of Manufacture: 2020 Rated Current: 154 A Short-Circuit Current: 6 kA Weight: 1,100 kg IP Protection: 43/20 Power Supply: 3L+N+PE AC 400/230V, 50Hz If you have any further questions or require more information, please send us a message or give us a call. Gjdjyu Hkwspfx Agpoit

Condition: new, Year of construction: 2024, NEW Plasma Cutting Machine. Dimensions: 3,000 mm x 1,500 mm Giedpfxotu E Due Agpet Max. steel cutting thickness: 22 mm Max. stainless steel cutting thickness: 12 mm Supplied with CAD CAM software. DWG and DXF data transfer via USB and network card. CE certification. ISO 9001, GB/T 19001. 120 A generator. The operational cost is extremely low – only 5.5 kW and compressed air!

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Year of construction: 2006 Working area: 6,000 x 2,000 mm Incl. 500 mm pipe shaft for pipe and beam processing 1 x plasma cutting system Kjellberg HiFocus 160i with automatic gas console Cutting range steel up to 30mm, exchangeable head Manufacturer's data sheet: Kjellberg HiFocus 160i 2 x oxyfuel cutting torches up to 150mm Support table, extraction table 2,000 x 6,000 mm Shaft for processing pipes and profiles (without pipe cutting device) Complete gas supply with pressure reducer MMI console with 15″ touchscreen Machine control: MicroStep MSNC500® (based on Windows XP) Software: MicroStep CAM AsperWin Basic® Version 3.2 Giodpfxerurrao Agpot Spare parts and spare parts cabinet for plasma and oxy-fuel torches Filter system: Donaldson DFPRO 6 with existing feed pipes

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 11,500 h, machine/vehicle number: 3098, laser hours: 6,900 h, laser power: 10,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, power: 10 kW (13.60 HP), year of last overhaul: 2024, working range: 4,020 mm, Equipment: cooling unit, documentation/manual, safety light barrier, MSF Pro 4001.20LB MicroStep CNC cutting system from the MSF Pro series with the following features: • 2D laser cutting head with an IPG YLS 10000 U fiber laser source • Fully automatic shuttle table • Fully automatic HSK 63 drilling spindle • Powerful Donaldson DFPRO 6 filter system with 7.5 kW Technical specifications: Machine designation: MSF Pro 4001.20LB Working area: approx. 4,000 x 2,000 mm Guides: high-precision linear guides Drives: maintenance-free Panasonic AC servo motors Transverse speed: up to 100,000 mm/min Measuring system: IRC 2500 (incremental encoder) Z-axis positioning speed: 18 m/min Z-axis travel range: 150 mm Acceleration Z-axis: 0.75 G Positioning accuracy (Pa*): 0.07 mm according to VDI/DGQ 3441 Repeatability (Ps*): 0.03 mm according to VDI/DGQ 3441 Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90% EX-TRABEAM® Pro laser cutting head Cleaning and calibration station (LU3K) Automatic nozzle changer (8 nozzles) Fully automatic drilling spindle Technical specifications: Drilling from/to: Ø 4 mm - Ø 30 mm Threading from/to: M5 - M20 Max. material thickness: up to 25 mm* Power: 21 kW Revolutions: up to 10,000 rpm Tool cooling: internal cooling Tool change: automatic Giedpfx Ajvw Tdljgpet Automatic drilling tool measurement Pneumatic hold-down device Brush For removing drilling chips Donaldson® DFPRO 6 Cyclopeel filter system Fan power: 7.5 kW Flow rate: 4,500 m³/h Asper Nesting® | Automatic nesting software With witt Gas Mixer Machine has always been operated under a maintenance and support contract

Condition: good (used), Double side corner cutter Gijdpfx Aowungzogpot Very good condition. This is a professional, production device for rounding corners. Solid construction ensures precision of operation. Two trimming heads. Interchangeable knives. Adjustable margins. Controlled by foot pedal. One set of 8mm knives included Stack height approx. 80mm Weight 100kg Efficiency 20 cycles/min Compressed air supply.

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 11,500 h, machine/vehicle number: 3098, laser power: 10,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, working width: 2,000 mm, travel distance X-axis: 4,020 mm, travel distance Z-axis: 150 mm, Machine was overhauled in 2024. TECHNICAL DETAILS Working area: 4,020 mm Processing area: approx. 4,000 x 2,000 mm Maximum sheet thickness: 30 mm Maximum steel thickness: 30 mm Laser cutting head: EX-TRABEAM® Pro Laser source: IPG YLS 10000 U fiber laser source Laser power: 10,000 W Power: 10 kW (13.60 hp) Traverse speed: up to 100,000 mm/min Z-axis positioning speed: 18 m/min Z-axis travel: 150 mm Z-axis acceleration: 0.75 G Drilling Drilling range: Ø4 mm – Ø30 mm Holder: HSK-63 Thread cutting range: M5 – M20 Max. material thickness: up to 25 mm Power: 21 kW Revolutions: up to 10,000 rpm Tool cooling: internal cooling Tool change: automatic Drilling tool measurement: automatic MACHINE DETAILS Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90% Filter system: Donaldson DFPRO 6 Cyclopeel Fan capacity: 7.5 kW Volume flow: 4,500 m³/h Mechanics and Control Drives: maintenance-free Panasonic AC servo motors Measuring system: IRC 2500 (incremental encoder) Hold-down device: pneumatic Chip brush: available Laser hours: 6,900 h EQUIPMENT Godpfewyaxmox Agpjit Documentation/manual Cooling unit Safety light barrier Fully automatic shuttle table Fully automatic HSK 63 drilling spindle Cleaning and calibration station LU3K Automatic nozzle changer with 8 nozzles Donaldson® filter unit DFPRO 6 Cyclopeel Asper Nesting® automatic nesting software Witt gas mixer Maintenance and support contract

Condition: new, PRICE: 5000 EUR Pillar lift for cutter cart Made of stainless steel Lifting weight: 250 kg Gjdpfx Asvtz U Regpoit Dimensions: 1520x1300x2740mm Electrical power: 1.1kW Voltage: 380V 50Hz

Condition: new, PRICE: 5000 EUR Mobile lift for cutter cart Made of stainless steel Lifting weight: 200 kg Dimensions: 1160x800x2900mm Electrical power: 0.75kW Gsdpevtzzksfx Agpeit Voltage: 220V 50Hz

Condition: new, PRICE: 320 EUR Cutter cart Made of stainless steel Dimensions: 600x600x500mm Volume: 200 liters Gedpfxsvt Aice Agpeit

Condition: new, functionality: fully functional, Year of construction: 2023, laser power: 3,000 W, power: 3,000 kW (4,078.86 HP), input voltage: 380 V, input frequency: 50 Hz, type of cooling: water, total length: 6,000 mm, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, NS-6022HG Tube laser cutting machine 3kw 3 Chuck Professional Pipe Laser Cutting Machine with automatic loading system with 6m automatic unloading with Chinese 3D bevel head-BLT tubes T CE Anti-radiation glass protective guards Godowu Rm Repfx Agpsit AVR KIT OF NOZZLE, LENS ETC(SPCS FOR EACH) Series: NS-HG Type: Three chucks Groove function: Standard Power: 3KW Maximum pipe length: 7000mm Round pipe: Φ15mm-Φ220mm Square pipe: 15mm*15mm~150mm*150mm Rectangular pipe: 30*20mm~160*80mm Oval tube/flatoval tube: Short axis≥15mm, long axis ≤ 210mm Channel steel: Max20# I-beam: Max18# H steel: Max175*90mm Maximum acceleration: 1.0G Chuck maximum speed: 100r/min Machine weight: 10t Power supply specification: 380VAC, 50Hz Standard: Support servo (groove), dust prevention (Y axis), dust prevention (X axis), dust prevention (Z axis), safety fence (light curtain), zero tail material, cutting area dust removal, rear card hollow dust removal

Condition: good (used), Good condition. Warranty & Delivery Component: complete delivery car The machine is of superior quality, recommended for all types of workshops as well as for factories with medium and large productions. When purchasing this machine, you have a 6-month warranty and a 5-year post-warranty. Worldwide Delivery We always have more than 1000 machines in stock so that each customer can choose from several options. 
With over 20 years of experience in the textile industry and over 10,000 satisfied customers, we make sure that your plans become successful businesses! Godpfxslmnzqo Agpsit

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 98 h, nominal power: 49.28 kW (67.00 HP), machine/vehicle number: 1VR91125KN1004048, Equipment: CE marking, Trench cutter with only 98 operating hours! TECHNICAL DETAILS Milling depth: 120 cm Milling width: 15 cm MACHINE DETAILS Net power: 50 kW Weight (according to type plate): 4,740 kg Tractor Tractor weight: 2,663 kg Tractor length: 320 cm Tractor width: 197 cm Height: 250 cm Max. transport speed: 10 km/h Milling boom Transport length: 207 cm Offset range: 61 cm Own weight without milling chain and boom: 690 kg Deutz diesel engine TD 2.9L Tier IV Final/Stage V Engine output: 67 hp Torque: 235 Nm Gisdpfx Asy Htgqegpst System pressure: 350 bar Pump output: 117 L/min Operating hours: 98 h EQUIPMENT Side-shiftable milling boom Large idler wheel Standard SHARK - COMBO milling chain CE certificate

Year of construction: 1988, condition: excellent (used), Ref: 11099 . 1990 Bobst SP 102 - CER Automatic die cutter with stripping and blanking. Non Stop Feeder Steel Plate Feeder Digital Speed clock Left Hand Pull Lay Gedoy Ipt Njpfx Agpjit Active Front Lays Die Cut Station Centerline 1mm Cutting Plate Micrometric Adjustment Quick Lock Chase Stripping Station with Quick Lock Stripping Frame 6 Standard Stripping Frames Blanking Station with Quick Lock Blanking Frame 1 x Universal Quick Lock Blanking Frame 6 Standard Blanking Frames Sheet Inserter in Blanker for Pile Stabilisation Can be run just as a Stripper and Sheets delivered into the Blanker Station Waste conveyor on Delivery Specification: Maximum Sheet Size 720 x 1020mm Minimum Sheet Size: 350 x 400mm Maximum Speed 8,000 SPH Maximum Cutting Pressure 250 Tons

Condition: excellent (used), Year of construction: 2014, operating hours: 1,350 h, machine/vehicle number: 14 083-1, Seydelmann K126 HU all stainless steel bowl cutter with rare option of fitted tote bin loader. Bought new in 2015 and only used for cutting herbs. Only used for 1,350 hours since new. Giedpfxevcqh Ej Agpot

Condition: excellent (used), Year of construction: 1985, Ref:11083 . 1985 COMO 220 MC2 Guillotine. Giodpjy Awy Hefx Agpst Swedish built heavy-duty guillotine for accurate cutting of paper and heavier substrates. Refurbished 2010 and upgraded to computer programme. Comprising; Right side table to facilitate rear loading of cutting bed Central air table Steel side tables Computer programme cut control, with keypad input of data Twin cut control buttons Variable pressure clamp control Swift knife change system and adjustment Powered variable speed back gauge I.R. light beam guarding to UK HSE spec. 2 x HSS knives Including knife change tools and accessories. Specification: Cut width, Max: 220 cm Cut depth, Max: 220 cm Clamp opening :18.5 cm Electrics: 415V, 30A, 50Hz

Year of construction: 2010, condition: good (used), Food Tools 5AFCE Cheese cutter Giodpfsy Ayb Tjx Agpjt Stainless, this ingredient reduction machine uses a wire grid to cut up to 40lb blocks of cheese or butter into smaller portions. Up to 120 products per hour, with a box of spare cutting wire, ideal for dairy facilities and bakeries

Condition: used, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade Gsdowgc I Repfx Agpoit • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-062, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system). 2 cutting bridge with 2 cutting heads including Z-axis 1 head 2D cut 1 head 2D cut Gisdpfxjwrn Iyo Agpet For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization Gedpoif Ek Refx Agpjit • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.