Used Mitsubishi Fa30 for sale (681)

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: general overhaul Control: Mitsubishi - 64 bit CNC Generator power: 70 Amperes - multipulse Travel ranges (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-position pick-up rotary electrode changer Working tank (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump) The OPS INGERSOLL wire erosion machine GANTRY 1200 HSJ / 64 bit, manufactured in 2006, has undergone a comprehensive and professional general overhaul in our facility and is in very good condition, both technically and visually. During the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected. The following overhaul work was carried out on the aforementioned machine: Replacement of ball screw and ball bearings of the X, Y and Z axes. Replacement of all (4) ball screws of the tank drive. Inspection and testing of the C-axis for tightness and accuracy. Geometric inspection of all axes according to OPS INGERSOLL protocol. Thorough cleaning of the entire machine base. Cleaning of the entire working tank including replacement of the felt scrapers. Complete repainting of the machine. Dcjdpfx Abszgckvj Djl Overhaul of the dielectric pumps. Replacement of all hydraulic and dielectric lines. Replacement of all pneumatic lines. Cleaning of the control cabinet, generator and control system. Replacement of all fans and batteries. Overhaul or replacement of all power supplies, units and servo amplifiers. Laser measurement after the machine overhaul. Finally, the machine was subjected to an extensive erosion test in accordance with the quality and testing specifications of OPS INGERSOLL. The machine is ready for immediate use and is ideally suited for reliable production operation. 09/02.

Condition: used, Year of construction: 2012, controller manufacturer: Mitsubishi, controller model: M70, _____ Description: Year of manuf. : 2012 Control : Mitsubishi M70 Turning length : 100 mm Mainspindle: Technology:Belt-driven spindle Speed:6.000 rpm Power (max.):7,5 kW Torque (max.):60,8 Nm Barcapacity:42 mm C-Axis:0,001° Workpiececlamping:Collet chuck, Type 173E Subspindle: Technology:Belt-driven spindle Speed:5.000 rpm Power (max.):5,5 kW Torque (max.):38,7 Nm C-Axis:0,001° Workpiececlamping:Collet chuck Movement in X/Z:140/310 mm Rapid travers in X/Z:12 m/min Dsdpfx Aboztifme Djcl Toolcarrier (X/Y/Z): Technology:Turret with 8 stations Tooldrive:5.000 rpm Movement in X/Y/Z:140/70/235 mm Rapid travers in X/Y/Z:20 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Cooling pump Rawmaterialfeed:Bar laoder, IEMCA Master 80 HF Finishpart removal:Part catcher with conveyorbelt Fire-extinguishing unit:Kraft + Bauer Further Equipment:Trafo

Condition: excellent (used), functionality: fully functional, power: 13.1 kW (17.81 HP), overall weight: 1,720 kg, operation weight: 1,720 kg, number of seats: 1, Year of construction: 2016, operating hours: 2,228 h, Equipment: rubber tracks, _____ TEREX TC16/SW/Swivel Bucket/2228 Hours • Manufacturer: TEREX • Type: TC16 • Year of Manufacture: 2016 Dcsdpfxozy Nprs Ab Djl • Operating Hours: 2228 hours • Power: 13.1 kW / 18 hp • Engine: Mitsubishi L3E 3-cylinder diesel • Adjustable undercarriage • Travel Speed: 0-2.4 km/h • Manual quick coupler • Lehnhoff swivel bucket M1.5 • Additional hydraulics • Dozer blade • Transport length: 3.80 m • Transport width: 1.34 m • Transport height: 2.29 m • Total weight: 1720 kg • German machine • Immediately ready for use • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 7,597 h, functionality: fully functional, machine/vehicle number: NL257200651, turning diameter: 366 mm, spindle speed (max.): 4,000 rpm, controller model: Mitsubishi 730UM CELOS, working length: 700 mm, number of slots in tool magazine: 12, TECHNICAL DETAILS Maximum machining length: approx. 700 mm Maximum turning diameter: 366 mm Workpiece length with tailstock: max. 728 mm Spindle speed: max. 4,000 rpm Tool turret: 12-position BMT60 star turret Tool drive: 40 / 14 Nm Speed of driven tools: max. 10,000 rpm Overhang length of driven tools: 100 mm Chuck: 10" hollow chuck, Ø 254 mm Chuck cylinder: hollow chuck cylinder BB210A821 Tailstock: NC tailstock Tailstock taper: MK 5 MACHINE DETAILS Coolant type: water-miscible coolant / emulsion Coolant pressure: 5 bar Extraction connection: Ø 150 mm Mains voltage: 380 V Frequency: 50 Hz Transformer power: 45 kVA Dcodpfx Aezy Hx Deb Djl Phases: 3 phases Isolation transformer: 400 V ± 5 % Current: 65 A Control system: Mitsubishi 730UM CELOS User interface: CELOS with ERGOline touch panel Machine operating time: 7,597 h Program runtime: 2,138 h Last maintenance: April 2024 Weight: 5,800 kg EQUIPMENT DMG MORI M730UM control system with CELOS ERGOline touch panel 12-position BMT60 star turret with driven tools 10" hollow chuck, Ø 254 mm Hollow chuck cylinder BB210A821 Double foot switch with protective cover NC tailstock with MK-5 mount Oil-air cooler for circulating spindle coolant Hinged belt chip conveyor High-pressure coolant system, 5 bar Oil mist separator AFS 1100 including interface Manual, swiveling tool pre-setter SCHNEIDER transformer 45 kVA Technology cycle "Alternating Speed" Further technical data can be found in the document attached!

Year of construction: 2000, condition: ready for operation (used), Voltage: 380V, frequency: 50Hz, 3 phases, equipment: rotary indexing table, filling station with powder hopper, pressing station with hydraulic pressing unit, conveyor belt, control panel with Run/Ram/Index functions, main switch, HMI/display PP-006, Mitsubishi PLC FX2N-32MR, expansion module FX2N-4DA, Mitsubishi operator panel F940GOT-SWD-E, hydraulic power unit with electric motor, pneumatic and hydraulic lines, safety enclosure, emergency stop, 400V/CEE connection and CE marking. An on-site inspection is possible. Dedpjzadmgefx Ab Decl

Year of construction: 2000, condition: ready for operation (used), Controls: Mitsubishi, weight: 2.53t. Equipment: counter spindle, tool turret with driven tool stations, linear slide with driven tools, bar feeder interface, tool set and setting tools, spindle monitoring EWL 4444. An on site inspection is possible. Dcjdpfezcfhqex Ab Del

Condition: ready for operation (used), Year of construction: 2018, cutting diameter 300 mm saw band length 3660 x 27 x 0.9 mm capacity 90 degrees: flat 320 x 290 mm capacity 45 degrees: round 290 mm capacity 45 degrees: flat 260 x 280 mm capacity 60 degrees: round 200 mm capacity 60 degrees: flat 180 x 170 mm coolant capacity ca. 100 l Control SPS total power requirement 2.4 kW AC weight 904 kg range L-W-H 2410 x 1920 x 2020 mm in good conditions Original price approx. 22.000 euros Special price on request Features: - Robust electro-hydraulic miter band saw, fully automatic (INDUSTRIAL) * Fully automatic with automatic material feed * Material feed unit with recirculating ball screws - Includes PLC MITSUBISHI control unit * 20 programs, each with 15 cutting lengths + number of pieces programmable - For angles from 0° to 60°, with ball-bearing rotary table Dedpfey Uy S Asx Ab Dscl * Mitre cuts up to 45° possible in automatic mode * Mitre cuts up to 60° possible in semi-automatic mode * Manual mitre adjustment * Stepless adjustment of the mitre angle - Saw blade guides made of carbide plates - Saw feed continuously adjustable via fine throttle - Strong machine bed and torsion-free saw frame - Stepless speed adjustment of the saw blade - Coolant device - Operating instructions for machine + control system * Special accessories included: - 1x PEGAS chip conveyor

Year of construction: 2007, condition: ready for operation (used), Turning diameter: 420mm, turning length: 820mm, spindle bore: 105mm, speed: 3000rpm, spindle power: 22kW, travel X/Z: 280mm/820mm, tool positions: 10, drive tool speed: 6000rpm. Machine dimensions X/Y/Z: approx. 4400mm/2100mm/2300mm, weight: approx. 6000kg, control: Mitsubishi M-720BM (MAPPS 2), operating hours: 10000h. Including various accessories. The driven tools have never been used, only the Y-axis has run. Measuring arm and ball screw of the Y-axis are as good as new. Documentation available. On-site inspection is possible. Dcedpfjv I U Iyjx Ab Djl

Year of construction: 2006, condition: ready for operation (used), fuel type: diesel, Vehicle Description Diesel forklift MITSUBISHI FD35N Year of manufacture: 2006 According to the hour meter: 13,347 hours 3.5-ton lifting capacity Dedpfx Aboi Dnqko Djcl 2.45-meter overall height 3.70-meter lifting height 42.3 kW Mitsubishi engine - Full-view mast - Wide fork carriage - Twin tires - Side shifter - Lighting system - Original paint - Ready for immediate use Selling price: €10,500.00 net Affordable delivery options also available!

Year of construction: 1980, condition: used, MITSUBISHI MAF 210/150A CNC HORIZONTAL BORING MILL MITSUBISHI MAF210/150A, YOM 1980 . Dcjdpsca Hr Nofx Ab Djl MAIN TECHNICAL DATA: Boring Spindle ..... 150 mm Milling Spindle ..... 210 mm Vertical Head Travel, Y-Axis ..... 3480 mm Column Travel, X-Axis ..... 14000 mm Ram Travel, Z-1 Axis ..... 700 mm Boring Spindle Travel, Z-Axis ..... 900 mm Spindle Speeds,4-Ranges ..... 4-800 RPM Rotary table 1600x2100mm Tailstock Many accesories (milling heads, chuck...) MORE PICTURES AND MOVIES ON REQUEST

Condition: used, Year of construction: 1977, Technical details attached. Rotary table 4500x4500 , travel 4000mm, max load 100 ton. Floor plates 6 pcs. 2000x4000 It was retroffited with CNC Siemens 840D More pictures and details on request. Video with the machine working is available on request. Dcjdpfecfkn Uox Ab Djl

Year of construction: 2009, condition: excellent (used), stainless frame, currently set for 32 mini pots, 30mm diameter x 25mm depth, previously used for Knoss stock pots, adjustable temp controls, Mitsubishi Go T1000 PLC Dsdpjdwhf Njfx Ab Djcl

Year of construction: 2002, condition: used, functionality: fully functional, machine/vehicle number: J20M0036, Wire EDM machine with automatic wire threading (AT) TECHNICAL DETAILS x-way: 500 mm y-way: 350 mm z-way: 300 mm Dcjdpfx Abenh R Nkj Dsl amps: 50 A table length: 780 mm table width: 630 mm table feed: 1 - 1.300 mm/min wire feed: 15,00 m/min Control: W21F AP-2 workpiece size: 1050 x 800 x 295 mm workpiece weight: max. 800 kg MACHINE DETAILS total power requirement: 12,00 kW machine weight: approx. 4,50 t space requirement: approx. 3.00 x 3.50 x 2.50 m

Condition: used, mileage: 101,561 km, power: 107 kW (145.48 HP), first registration: 05/2007, fuel type: diesel, overall weight: 7,500 kg, color: white, gearing type: mechanical, emission class: euro4, Equipment: air conditioning, tail-lift, * Mitsubishi Canter Fuso 7C15 4x2 * Box body with tail lift * Air conditioning * Manual transmission * VIN: TYBFE85BH6DU00370 * Engine type: 4M5.2AR-33-69 * kW: 107 * Euro 4 * Displacement: 2977 cc * Unladen weight: 4460 kg * Payload: 2965 kg * Gross vehicle weight: 7500 kg * Wheelbase: 4200 mm * Box interior length: 6.15 m * Box interior width: 2.50 m * Box interior height: 2.50 m * Margin scheme taxation * All information provided without guarantee Djdjr Ex Daepfx Ab Djcl Tel./WhatsApp:

Condition: used, mileage: 587,500 km, power: 129 kW (175.39 HP), first registration: 08/2017, fuel type: diesel, overall weight: 7,500 kg, gearing type: automatic, emission class: euro6, Equipment: tail-lift, Tail lift: ----Refrigeration unit: ----- Automatic tail lift – air conditioning – Carrier Supra 550 Suspension: Dsdpfex Dzqvox Ab Decl Leaf suspension

Condition: used, mileage: 47 km, power: 85 kW (115.57 HP), first registration: 11/2025, fuel type: electric, maximum load weight: 815 kg, overall weight: 4,250 kg, axle configuration: 4x2, wheelbase: 2,800 mm, color: other, driver cabin: day cab, gearing type: other, emission class: euro6, suspension: other, Year of construction: 2020, This offer is non-binding. Subject to errors and prior sale. If a foreign currency is stated, the current daily exchange rate applies. The valid currency is that of the vehicle's location. Wheel configuration 4x2, single cab, payload 2 t, GVW up to 6 t, wheelbase 2800 mm, heated mirrors, reversing warning system, airbags for driver and passenger, radio with Bluetooth, technical maximum permissible GVW 6000 kg, current registration GVW 4150 kg, up to 4250 kg as a BEV transporter can be operated with a category B driving license (please observe requirements!!). Dcedpox Hbp Tjfx Ab Dol

Condition: new, functionality: fully functional, Topking X-25 CNC Cylindrical Grinding Machine Topking “The X-25 CNC cylindrical grinding machine is the perfect answer for UK manufacturers facing space constraints,” explains Simon Rood. “Unlike traditional T-type base designs, the X-Series utilises a revolutionary cross-slide structure. This design allows the X-25 to reduce floor space requirements by over 30% while significantly enhancing stability. It is a superior choice when space is limited, making it ideal for busy production environments where every square metre counts.” Machine overview INTRODUCTION Compact CNC cylindrical grinding machine with an impressive capacity. The X series CNC cylindrical grinding machine integrates advanced design and innovative features, offering efficient, precise, and flexible machining solutions. This grinder can meet various processing needs and ensure high-quality results for small or large components. The X-axis and Z-axis of the X-series CNC cylindrical grinding machine adopt a cross-slide design, effectively reducing the footprint and axial travel, thereby saving production space. The high-rigidity machine body and the heavy-duty spindle and tailstock significantly increase the component load capacity. Dsdpfxeubbqio Ab Djcl The high rigidity machine body ensures stability during grinding, providing high-quality machining results. The operating system is equipped with a high-performance CNC control system and a built-in graphical user interface (GUI), making setup easy and enabling users to operate with ease. The grinding applications are extensive, offering customers the most suitable machining solutions. Specification Swing (Max) 270mm Distance between centres 200mm Grinding Diameter (Max) 250mm Weight between centres (Max) 5kg CNC Control System FANUC or Mitsubishi CNC Controls

Condition: good (used), mileage: 1,610,122 km, power: 330 kW (448.67 HP), first registration: 01/2017, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2017, Equipment: AdBlue, Bluetooth, EBS, air conditioning, cruise control, electric window regulation, fog lights, navigation system, parking heater, power mirror, seat heater, soot filter, spoiler, tail-lift, trailer coupling, - Aluminum fuel tank - Brake booster - EPS (Electronic Power Steering) - Refrigerator - Air suspension - Particle filter - Radio/CD player - Rain sensor - Sliding roof - Side door - Seat heating - Auxiliary heater - Toolbox Axle configuration Suspension: Air suspension Front axle: Steerable Rear axle 1: Lift axle Weights Unladen weight: 14,121 kg Payload: 12,379 kg Gross vehicle weight: 26,500 kg Functionality Refrigeration unit: Diesel and electric Condition Technical condition: good Optical condition: good Warranty Warranty: No liability for printing or typing errors. Subject to changes, prior sale, and mistakes! Dcsdpfx Aoxpd T Deb Dol Further information Contact Emad Al Shogran for more information. Vehicle number: 69 Without trailer Mercedes Benz Actros 2745 / 6x2 / Mitsubishi TU85SA / Euro 6 / 2 x tail lifts Engine replaced, 600,000 km! Chassis no.: WDB96302010115823 Suspension: Air / air Transmission: Automatic Air conditioning Engine brake Cruise control Cool box Auxiliary heater Park air conditioning EURO 6 emission standard Tail lift TÜV: 01.2026 Mitsubishi Refrigeration unit: Diesel + Electric Truck internal dimensions: Length: 8.13 m Width: 2.50 m Height: 2.70 m Special equipment: Front axle load 8.0 t, driver's side airbag, alarm system, audio system: CD radio (Bluetooth), exhaust downward right, high compressed air unit, air horn, electrical pre-installation in cab 24V / 100 A, assistance system: Brake Assistant (Active Brake-Assist 3), assistance system: Roll Control Assist, info display 12.7 cm with additional screen, automatic climate control, upper comfort bunk, wide, additional fuel pre-filter, fuel tank: 290 L aluminum, cool box / refrigerator, integrated air intake, long-life air filter, 2-cylinder air compressor, reinforced engine brake, reinforced rear cross member, fleet management system interface, cab seats: front passenger seat with armrest, front passenger standard air-sprung seat, fold-down front passenger seatback, driver's comfort air-sprung seat, external sun visor, sunblind for side windows, driver and passenger doors, steel rims 11.75x22.5 (on trailing axle), steel rims 9.00x22.5, electric stationary air conditioning, left storage box under cab, 12V socket front passenger footwell, additional 24V socket front passenger footwell Additional equipment: EURO 6 emission standard, axle configuration: 6x2, Actros 4, trailer brakes 2-line system, left connectors, 24V / 15-pin trailer socket, electrically adjustable and heated exterior mirrors, rear axle differential lock, steel compressed air tank, assistance system: Attention Assist (fatigue detection sensor), assistance system: Lane Keeping Assist, Cab: L GigaSpace, cab: steel-sprung, comfort, cab variant: GigaSpace, suspension: air / air (full air), electric windows, tinted windshield, 100A generator, 12-speed transmission - type: G 211-12, AdBlue tank 60 L, rear axle ring gear 440, body/chassis: frame, lower comfort bunk, central locking, communication interface, radiator grille, regulated hydraulic steering pump, trailing axle lift device, engine 12.8 L - 330 kW R6 diesel (OM 471), engine compartment encapsulation, trailing axle...

Condition: excellent (used), Stroke X-Y-Z 500 x 350 x 300 mm Dcedpfx Asxl A Aiob Djl Workpiece dimensions 1050 x 800 x 295 mm Workpiece weight 1500 kg U+V-Axis +/- 21 mm Misc. accessories MARCELS MASCHINEN AG

Condition: used, Year of construction: 2016, Used Filling Monoblock MITSUBISHI up to 39000 BPH It is extremely important to note that this machine is complementary to it’s rinsing machine: (click here). The Filling Monoblock Mitsubishi offers an advanced solution in the bottling sector. Specifically designed to handle a wide range of liquids, it boasts a capacity of up to 39,000 BPH. Dedpjvgvlksfx Ab Djcl Technical Specifications of Model FHRJ80M Mitsubishi Heavy Industries Mechatronics Systems Ltd manufactured the FHRJ80M model in 2016 to meet the growing demands for speed and precision in bottling. Equipped with 80 valves, this weight-based filling system accurately doses products, significantly minimizing waste. Moreover, the system fills aluminum bottles in various sizes ranging from 0.29L to 0.41L. Thus, it showcases its versatility for handling different types of liquids such as coffee (last product that has been filled by this monoblock), liquid soap, oil, and spirits. Bottling and Capping Features Furthermore, the Mitsubishi FHRJ80M monoblock integrates a capping function with 24 heads, accommodating aluminum screw caps of 28 mm and 38 mm. Its clockwise rotation direction eases integration into existing production lines. Additionally, the precision in cap placement and swift execution ensure the process’s efficiency, which is crucial for preserving product integrity and container safety during transport and storage. Storage and Maintenance Currently stored in a warehouse, the Filling Monoblock Mitsubishi remains in excellent condition to ensure its functionality and readiness. Also, the availability of instruction manuals aids in maintenance and repair operations, which are essential for extending the machine’s lifespan and maintaining optimal performance. Integrated safety features protect operators and the machinery, thereby reducing accident risks during operation. Conclusions of the Filling Monoblock Mitsubishi Finally, the used Mitsubishi FHRJ80M filling monoblock serves as an optimal solution for those seeking efficiency and reliability in the bottling industry. Its adaptability to various formats and product types, along with the precision of its filling and capping system, make it ideal for a broad range of industrial applications. With proper maintenance and careful management, this monoblock can deliver high performance, significantly enhancing production process optimization. This model not only meets but also exceeds industry expectations in terms of functionality and performance.

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 129 h, load capacity: 5,500 kg, lifting height: 5,500 mm, free lift: 1,673 mm, fuel type: electric, mast type: triplex, construction height: 2,670 mm, fork carriage width: 1,190 mm, fork length: 1,200 mm, empty load weight: 8,711 kg, total length: 2,990 mm, drive type: Elektro, construction width: 1,450 mm, Electric 4-wheel forklift Load center: 600 Dedpfx Ajt H Tnreb Docl Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Technical condition: New Front tires type: Non Marking Rear tires Type: Non Marking Battery Volt: 80V Battery Ah: 930Ah Battery year of construction: 2022 Description: New device available immediately. Manufacturer's warranty 24 months, maximum 2,000 operating hours. Depending on which value occurs first. Optional attachments, full cab etc. available at extra cost. Sideshift, 3rd valve, 4th valve, rear work lights, front work lights, load guard, full free lift, CE certificate, scales, safety light,

Condition: good (used), mileage: 1,610,122 km, power: 330 kW (448.67 HP), first registration: 01/2017, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 8,130 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, Year of construction: 2017, Equipment: ABS, AdBlue, air conditioning, cruise control, electric window regulation, fog lights, navigation system, parking heater, power mirror, soot filter, spoiler, tail-lift, trailer coupling, - Aluminum fuel tank - Brake booster - Roof spoiler - EPS (Electronic Stability Program) - Refrigerator - Particulate filter - Radio/CD player - Sleeper cab - Side door - Auxiliary heater - Toolbox Axle configuration Suspension: Air suspension Front axle: Steered Dedpfxowvqkxo Ab Dscl Rear axle 1: Lift axle Weights Unladen weight: 14,121 kg Payload: 12,379 kg Gross vehicle weight: 26,500 kg Functional Refrigeration engine: Diesel and electric Condition Technical condition: good Visual condition: good Warranty Disclaimer: No liability for printing & typing errors, subject to change, prior sale, and errors! Further Information Please contact Emad Al Shogran for more information. Vehicle number: 69 Engine has been replaced, has 600,000 km!!! Mercedes Benz Actros 2745 / 6x2 / Mitsubishi TU85SA / Euro 6 / 2 x tail lifts / Full combination Chassis number: WDB96302010115823 Suspension: Air / Air Transmission: Automatic Air conditioning Engine brake Cruise control Cool box Auxiliary heater Stationary air conditioning EURO 6 emission standard Flower width (possibly error – please clarify) Tail lift TÜV (MOT): 01.2026 Mitsubishi Refrigeration engine: Diesel + Electric Truck interior dimensions: Length: 8.13 m Width: 2.50 m Height: 2.70 m Trailer: Mitsubishi TU85SA Refrigeration engine: Diesel + Electric Brand: Van Weel Chassis number: XL900002009081068 First registration: 26.01.2010 Unladen weight: 6,800 kg Gross weight: 18,000 kg 2 axles PBW Tail lift TÜV (MOT): HU: 12.2025 Trailer interior dimensions: Length: 7.27 m Width: 2.50 m Height: 2.88 m Special equipment: Front axle load 8.0 t, driver's side airbag, alarm system, audio system: CD radio (Bluetooth), exhaust downwards right, high pressure air unit, air horn, electric pre-wiring in cab 24V / 100A, driver assistance system: brake assist (Active Brake Assist 3), driver assistance system: roll control assist, info display 12.7 cm with additional indicators, automatic climate control, wide comfort bunk on top, additional pre-filter for fuel, fuel tank: 290l aluminium, cool box / refrigerator, integrated air intake, long-life air filter, 2-cylinder air compressor, reinforced engine brake, reinforced rear cross member, fleet management interface, cab seats: armrest passenger seat, cab seats: standard suspension passenger seat, cab seats: foldable passenger seat backrest, cab seats: comfort suspension driver’s seat, exterior sun visor, sun protection roller blinds on side windows, driver and passenger door, steel rims 11.75x22.5 (on trailing axle), steel rims 9.00x22.5, electric stationary air conditioning, left side storage box under cab, 12V socket in passenger footwell, additional 24V socket in passenger footwell. Further equipment: EURO 6 emission standard, axle configuration: 6x2, Actros 4, trailer brake 2-line, connections left, trailer socket 24V / 15-pin, electric adjustable and heated exterior mirrors, rear axle differential lock, steel air tank, driver assistance system: Attention Assist (fatigue detection sensor), driver assistance system: Lane Keeping Assist, cab: L GigaSpace, cab: steel-sprung, comfort, cab variant: GigaSpace, suspension: full air, electric window lifters, tinted windscreen, generator 100A, transmission 12-speed - type: G 211-12, AdBlue tank...

Condition: used, Year of construction: 2014, operating hours: 6,890 h, Equipment: all wheel drive, MAKE: HYUNDAI TYPE: ROBEX 145LCR-9 YEAR: 2014 CE MARKED: YES OPERATING HOURS: 6890 HOURS Dsdpfezyfn Dox Ab Dscl TIRES/UNDERCARRIAGE: 80% POWER: 85KW ENGINE: MITSUBISHI D04FD WEIGHT: 16950KG OPTIONS: TRIPLE BOOM BLADE AIR CONDITIONING ROTOTILT HYDRAULIC QUICK COUPLER BUCKET HAMMER HYDRAULIC LINES SORTING FUNCTION VERY GOOD CONDITION

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total height: 2,600 mm, total length: 3,300 mm, total width: 2,000 mm, overall weight: 5,600 kg, spindle speed (max.): 12,000 rpm, number of spindles: 1, Equipment: chip conveyor, documentation/manual, Here is an offer for a vertical machining center from the manufacturer Akira Seiki with a dual-pallet changer. The machine is in good condition and can be inspected and tested at any time. Manufacturer: Akira Seiki Type: RMV700APC Year of manufacture: 2016 Control: Akira Mi745 - Mitsubishi Technical data: Travel ranges X-Y-Z: 700x400x400 mm Table/pallet: 700x400 mm Number of pallets: 2 (APC) Max. table load: 160 kg Spindle nose to table: 200–600 mm Spindle speed: 12,000 rpm Rapid traverse rate X: 48 m/min Rapid traverse rate Y: 60 m/min Rapid traverse rate Z: 72 m/min Cutting feed rate: 10 m/min Tool magazine: 24 + 1 Spindle taper: HSK63 Max. tool diameter: 75 mm Max. tool length: 200 mm Max. tool weight: 4.5 kg Tool change time (T–T): 1.9 s Chip-to-chip time: 3.4 s Positioning accuracy: 0.012 mm Repeatability: ±0.005 mm Coolant tank: 150 l Djdpfxszwvqkj Ab Decl Power consumption: 25 kVA Compressed air: 0.5 MPa Machine weight approx.: 5,600 kg Footprint according to manufacturer: 1,900 × 3,144 mm

Condition: used, mileage: 1,261,468 km, power: 324 kW (440.52 HP), first registration: 11/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, loading space volume: 39 m³, loading space length: 7,350 mm, loading space width: 2,470 mm, loading space height: 2,170 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, Vehicle No. for customer inquiries: 156 ----Superstructure: * Manufacturer: Kiesling * Tail lift BÄR 2,000kg * Lateral anchor rails * Roof mounting rails * Floor mounting rails * 2x Cool Slide partition wall Cooling unit: * Mitsubishi TU100SA MULTI * 2-chamber system * 2 evaporators * Standby and in-transit cooling * Diesel + electric power * Fresh produce and deep-freeze vehicle * Cargo area dimensions: L: 7,350mm W: 2,470mm H: 2,170mm * Payload: 13,700kg ----Special equipment: * Automatic climate control * Retarder * Tag axle NOL-08, steered, liftable * Speed control system (cruise control) with distance control * Radio MAN Media Truck Advanced 12V with navigation system * Auxiliary air conditioning * Cooler box * Storage compartment * Trailer coupling: Ringfeder 5050 A * Mobile phone antenna * Exterior mirrors and wide-angle mirrors, electrically adjustable and heated * Battery 225 Ah * Trailer battery connection 24 V * Mechanical battery disconnect switch * Curb mirror on the right, electrically adjustable and heated * Bridge mounting brackets bolted * Differential lock rear axle * Digital axle load display for air-suspended axles * Pressure sensor for air suspension bellows * ETA fuse * Cab: with air suspension * Flame start system * Transmission 12-speed - Type: ZF 12 AS, Tipmatic * Heated air dryer * Auxiliary heater Eberspächer D4S * Exterior sun visor * Power socket in cab 12V and 24V * Control module for fleet management system Dcedpfszp S E Isx Ab Dol * Front axle shock absorbers reinforced * Door extension for cab * Front axle VOK-09 curved * Additional long-range/fog lights with turning light ----Standard equipment: * Axle configuration: 6x2 * Ambient lighting * Approach/front mirror * Trailer socket 24V / 7-pole * Trailer socket ABS * Anti-lock braking system (ABS) * Anti-slip regulation (ASR) * On-board computer MAN-Tronic * Electronic stability program (ESP) * Electronic braking system MAN-Brakematic * EURO 6 engine * Cab: with Nordic insulation * Cab: XL * Driver's seat comfort, air-suspended * Suspension: leaf spring / air * Power windows * Remote control central locking * Windshield tinted * Generator 28 V 80 A * Sliding roof mechanical * Body/Superstructure: chassis * Rocker arm - EVB brake * Fuel filter heated * Fuel tank: combination tank - 400 L diesel + 60 L urea solution (AdBlue) * Steering wheel with multifunction buttons * High-mounted air intake * Air compressor 1-cylinder 360 cc * Engine 12.4 L - 324 kW diesel * Engine compartment encapsulation * Disc brake rear axle * Disc brake front axle * Lateral protection device * Rear side windows tinted * Seat cover / upholstery: comfort quality * Sun protection roller blind for windshield * Sun protection roller blind side window, driver's door * Spray mist reduction * Stabilizer on one rear axle * Stabilizer front axle * Storage box accessible from the outside * Control unit Type cab * TGX * Door windows tinted * Rear underrun protection * Front underrun protection * Viscous fan * Central locking * Permissible total weight 26.0 t ----Technical data: * HSN/TSN: 1516/000 * Suspension: leaf-air-air/lift/steered * Automatic transmission * Emission class: EURO6 * Environmental badge: 4 (green) * Wheelbase: 4,500mm * Cargo area dimensions: L: 7,350mm W: 2,470mm H: 2,170mm * Payload: 13,700kg * Tire size: 315/70 R22.5 * Tire tread: approx. 30% - 70% - 20%