Used Monguzzi Tro 3000 for sale (13,661)

Condition: ready for operation (used), Deutronic DX 3000 / 3-CAN-60-DIV built-in power supply Condition: 1 Serial number: 9122080017, used, in good condition, 100% functional, scope of delivery as shown in photos. Djdpfxjy Srnke Aggjkt

Year of construction: 2023, condition: used, Workpiece length: 3000mm, swing over bed/carriage: 800mm/570mm, turning diameter without gap bridge: 1035mm, gap bridge length: 330mm, bed width: 400mm, travel X/Z: 420mm/230mm, max. spindle speed: 1600rpm, spindle bore: 105mm, spindle mount: D1-8, spindle taper: MT5, tailstock taper: MT5, tailstock quill diameter: 90mm, tailstock quill stroke: 235mm, main drive motor power: 7.5kW. Machine dimensions X/Y/Z: approx. 4740mm/1140mm/1910mm, weight: approx. 3870kg. Including measuring system. Documentation available. An on-site inspection is possible. Dkjdpfezxhlvsx Aggjt

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,500 mm, RepairFIT by Dornhöfer The difference. Includes installation & commissioning! KEY TECHNICAL DATA Dksdezux Awopfx Aggot Machine year of manufacture: 2016 Capacities / Travel: Longitudinal (X): mm 3,000 Vertical (Y): mm 2,000 Lateral (Z): mm 1,500 Clamping surface, NC rotary table: Swivel table: mm 1600 x 1400 Transport load: kg 15,000 Positioning accuracy: arc/sec ±2.5 Paint finish: graphite gray RAL 7024 / agate gray RAL 7038 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power (from 376 rpm): kW 40 Spindle speed range: Spindle speed: min-1 0 - 3,000 Torque: Nm 1,360 Speed control: 3-stage (oil-cooled) with automatic switching Connection power: kVA approx. 53 Feeds: Working feed max.: X, Y and Z axis mm/min 15,000 Max. Rapid traverse speed: X, Y and Z axis mm/min 25,000 Space requirement Length approx. mm 8,500 Height approx. (without tool changer) mm 4,200 Width approx. mm 5,600 Weight: kg approx. 29,200 HEIDENHAIN iTNC 530 HSCI Automatic MTE milling head Diagonal Automatic tool changer Chip conveyor Coolant system with 50 bar & (IKZ) Full enclosure for working area (closed at the top) Extraction system for the aforementioned full enclosure Special operating mode RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are procured after a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, the identified obvious defects and faults were professionally repaired by our skilled service team.

Condition: good (used), Year of construction: 2008, functionality: fully functional, CNC lathe Okuma LB 3000 EX MC 500 Djdpjzwlw Tsfx Aggokt Control: OSP-P200L Year of manufacture: 2008 Internal machine number: 69 Turning length: 500 mm Turning diameter: 340 mm Swinging diameter over bed: 530 mm Spindle speed: 4,200 rpm Tool holder: BMT 60 Tool turret, 12 stations (powered) C-axis: 0.001 degrees Equipment: - One-touch IGF - Chip conveyor - Touch setter - 3-jaw chuck Kitagawa B-210 - NC tailstock

Condition: ready for operation (used), Trumpf Laser TruMark 3000 marking laser controller, SN: L0131E1357, with 6m power cable and 2 keys, used, in good condition, 100% operational, scope of delivery as shown in the photos. ATTENTION: Please enquire separately for packing and shipping costs! Dkodozzikrspfx Aggjt

Condition: used, functionality: fully functional, total width: 28,000 mm, shelf height: 3,500 mm, support length: 2,700 mm, This used Nedcon pallet racking system is a stable and space-saving solution for industrial storage requirements. The heavy-duty racking is ideal for warehouses, logistics, industry, workshops, and freight forwarding companies. With the durable Nedcon PR2 crossbeams and matching frames, the racking system offers a reliable way to store Euro pallets and heavy load units. PRODUCT DETAILS: Height: approx. 350 cm Depth: approx. 110 cm Length: approx. 28 running meters Shelf load: up to 3,000 kg Field load: up to 9,000 kg Crossbeams: approx. 270 x 11 x 4 cm PR2 Product number crossbeams: CC1104015 Frames: approx. 350 x 110 cm, pre-assembled Frame color: Blue Dkedozy Uflspfx Aggjt Crossbeam color: Orange Levels: Ground + 2 Pallet spaces: 90 incl. ground spaces Condition: Used Nedcon DELIVERY SCOPE: 11 x Frames approx. 350 x 110 cm, pre-assembled 40 x Crossbeams approx. 270 x 11 x 4 cm PR2 80 x Locking pins Depending on current stock, we can also offer you suitable Nedcon frames with a height of approx. 400 cm. Price: €1,760.00 Net €2,094.40 Gross You will receive an invoice with VAT shown. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams optional - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will gladly create a non-binding offer for you – tailored to your requirements. Whether it's a new installation, renovation, or expansion – we will provide you with competent advice on your racking configuration. SHOWROOM: Feel free to visit us in our showroom! You can get a comprehensive overview of our pallet racking, shelving, and other solutions on site. Many systems are set up and can be experienced directly. Our specialist consultants are happy to answer your questions and provide individual advice – we look forward to your visit! Haven't found the right one yet? Visit our website, where you can quickly see an overview of many offers & variations of the products! ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us by message or phone. You can find our phone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 16:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: used, mileage: 35,000 km, power: 103 kW (140.04 HP), first registration: 11/2020, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 04/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,116 mm, loading space width: 2,050 mm, loading space height: 400 mm, Equipment: ABS, central locking, Citroen Jumper Platform Truck, 2.2 liters, 103 kW – DUMP TRUCK – Three-way tipper German vehicle, one owner, in top condition Trailer hitch, 3000 kg Platform length: 3.16 meters Platform width: 2.05 meters * Standard: Airbag on driver’s side * Connection box for body manufacturer * Anti-lock braking system (ABS) * Drive type: Front-wheel drive * Exterior mirrors, long, for vehicle width 2200 mm * Exterior mirrors with wide-angle view * Turn indicators integrated into exterior mirrors, colored * Electronic Stability Program (ESP) * Driver assistance system: Hill-start assist * Reinforced rear suspension * Electric windows, front * Body/superstructure: Standard tipper * Fuel tank: 90 liters * Steering column (steering wheel) adjustable in height * Engine 2.0 liters - 96 kW Blue-HDI FAP CAT * Wheelbase 3450 mm * Diesel particulate filter Dksdpfx Aozu U D Regget * SCR system (AdBlue technology) * Side protection strips * Power steering, electronically controlled * Seat cover/upholstery: Fabric * Seats in the cab: Double passenger seat * Seats in the cab: Driver’s seat with armrest, adjustable in height * Seats in the cab: Driver’s seat with lumbar support * Super central locking with remote control * Maintenance: normal operating conditions * Immobilizer with transponder * Permissible total weight 3.50 tons * Sales consultant information * + * AN APPOINTMENT IS REQUIRED FOR A TEST DRIVE OR INSPECTION * + * Trade-in and financing options available. * Input errors cannot be ruled out. * Please check the equipment on the vehicle. Errors and omissions excepted. Subject to prior sale.

Condition: used, Year of construction: 2018, Overview This Krones Linatronic M is an empty bottle inspector for glass bottles, built in 2018. It inspects every empty container before filling and rejects any container that fails one of the inspection stages. The machine combines camera-based base, sealing surface, screw thread and sidewall inspection with high-frequency and infrared residual liquid and caustic detection. Two sidewall modules with four mirror assemblies and four cameras provide a compact full-front view of the container, and the DualFlash neck finish lighting inspects the outer and inner sealing surface separately using two minimally offset lighting angles. Foreign containers are identified at the machine infeed by height, contour and colour detection. Three Ecopush rejection points separate foreign, dirty and damaged containers. The machine is operated from a Krones iPanel CD terminal. Technical data - Manufacturer: Krones - Model: Linatronic M - Machine type: empty bottle inspector - Year of manufacture: 2018 - Application: inspection of empty bottles prior to filling; neck ring detection for returnable PET containers included - Inspection modules: base inspection, sealing surface inspection, screw thread inspection (cone optics), sidewall inspection - Sidewall inspection: 2 modules with 4 mirror assemblies and 4 cameras, two views per camera at 45° - Residual liquid and caustic detection: high frequency and infrared - Additional detection: polarising transparent films at container base and sidewall, glass fragments at the container base, scuffing via sidewall camera - Foreign bottle detection at the infeed: container height, contour and colour via camera - Rejection: 3 x Ecopush - foreign containers at the infeed, dirty containers and damaged containers at the discharge - Control: Krones iPanel CD operator terminal, prepared for data connection to a single-station PC (Datalyser) Dodpfxjzy Ud Is Aggekt - Test bottle programme with 2D code - Conveyor height: 1,200 mm, adjustment range 1,155 - 1,315 mm - Minimum required room height: 2,810 mm - Overall dimensions: approx. 6,700 x 1,300 x H 2,800 mm - Direction of operation: right-left machine - Power supply: 400 / 230 V, 3/N/PE, 50 Hz, 6 A full load current, 20 A pre-fuse; auxiliary supply 230 V, 1/N/PE, 5 A - Standards: IEC 61439-1 / IEC 60204-1, CE marked - Machine base and housing: stainless steel (AISI 304 equivalent), clean design Equipment - DualFlash neck finish lighting, separate inspection of outer and inner sealing surface - Combined thread inspection via the sidewall mirror assembly - Fallen container detection in front of the machine (photoelectric sensors with infeed pusher) - Base blow-off unit with clocked air nozzle for foam and lubricant residues - Container blower at the infeed, conveyor dead plate (3-fold) - Servo-driven collection module for rejected containers at the discharge - Festo pneumatic system with maintenance unit, food-grade lubricants - Emergency mode: passage operation without inspection - OEM machine data sheet and dimension drawing Condition Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 9,000 h, travel distance X-axis: 300 mm, number of axes: 3, Metal 3D printer manufactured in 2017. This TRUMPF TruPrint 3000 features a build volume of Ø 300 mm x 400 mm and is equipped with a 500 W fiber laser. It offers high-speed and high-density build rates, making it suitable for various applications. If you are looking to get high-quality metal printing capabilities, consider the TRUMPF TruPrint 3000 machine we have for sale. Contact us for further details regarding this machine. • Build volume: Ø 300 mm x 400 mm • Laser configuration: 1x 500 W fiber laser • Laser capacity: 500 W • Main supply: 360 – 440 V • Frequency: 50/60 Hz • Control voltage: 24 VDC • Connected load: 15 kVA • Full load current: 32 A • Nitrogen supply (N2): 6 – 10 bar • Argon supply (Ar): 6 – 10 bar • Air pressure: 5 – 10 bar • Laser operating hours: approx. 9,000 h • Last maintenance: 02/2024 • Condition: very good • Build material: AlSi10Mg only • Validated parameter sets: High Speed / High Density • High Speed build rate: 57 cm³/h at 60 µm layer thickness and 99.6% density • High Density build rate: 27 cm³/h at 60 µm layer thickness and 99.9% density • Optional accessories: • unpacking station • cooler Djdezu S Dbjpfx Aggokt • pallet jack • 11 build plates • 2 new filters • Optional accessories year: 2017 • Optional accessories condition: very good Availability: approx. Q3/2026

Condition: like new (used), Year of construction: 2020, functionality: fully functional, feed length X-axis: 5,300 mm, feed rate X-axis: 60 m/min, working width: 230 mm, spindle diameter: 180 mm, working height: 160 mm, power of feed motor: 9,000 W, spindle speed (max.): 6,000 rpm, height adjustment type: electric, number of spindles: 6, power: 127 kW (172.67 HP), input current: 241 A, feed roller diameter: 140 mm, Equipment: motor brake, Complete and functional Hydromat 3000 planer line with splitting axe. Ideal for automated production of cladding/flooring and roofing battens. Line consists of feeding by destacking tilting table, piece by piece planer feeder, minibundling station, trimming and automated stacking into package. Finish package is automaticaly lowered onto buffer conveyor for PET strapping. Line is offered for sale due to capacity upgrade. More information about line upon request. Dksdpfx Asrk Nkljgget

Condition: ready for operation (used), Year of construction: 2013, operating hours: 55,200 h, punching force: 18 t, total height: 2,252 mm, total width: 6,203 mm, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, controller manufacturer: BOSCH, controller model: MTX CMP70, product length (max.): 6,500 mm, number of axes: 3, This TRUMPF TruPunch 3000 CNC punching machine was manufactured in 2013. It features a working area of 2500 mm x 1250 mm and a maximum punching force of 180 kN. The machine is equipped with 18 tool stations and offers a maximum punching rate of 1000 strokes/min. If you are looking to get high-quality punching capabilities, consider the TRUMPF TruPunch 3000 machine we have for sale. Contact us for further details. • Maximum punching rate: 1000 strokes/min • Maximum marking rate: 2500 strokes/min • MultiTool change time: 0.3 sec • Tool stations: 18 • Sheet clamps: machine equipped with 3 vertically movable clamps • Maximum part size via part flap: 500 x 500 mm • Maximum part size via fixed chute: 80 x 50 mm • Control: BOSCH MTX CMP70 with 17-inch touchscreen • Tool holder: Rotating single-tool holder • Thread forming: M2.5 to M10, with thread counter and tool breakage monitoring • Marking/embossing function • Retractable die • Programmable stripper • Automatic tool length compensation • Punch stroke counter • Automatic punch lubrication • Vacuum slug removal • Forming function • Brush table with loading/unloading support • Automatic repositioning with programmable clamps • Average power consumption (production): 5.6 kW • Average power consumption (automatic shutdown mode): 0.3 kW • CE marked • Full service history available • Machine under power and in operation; test possible Additional equipment Djdpfxjzy Rlhe Aggskt • Independent part conveyor - not included in the sale • Tooling (e.g., RTC tool cassettes, punches/dies) - not included in the sale

Condition: ready for operation (used), Year of construction: 2024, We offer for sale a modern PAOLETTI Salvacut 3000 automatic cross-cut saw, designed for high-performance and precise cutting of wood materials. This machine represents a powerful and efficient solution for automated cutting operations with high speed, accuracy, and reliability. Key Features & Benefits Manufacturer: Paoletti Energy S.r.l. Model: Salvacut 3000 Year of manufacture: 2024 Automatic cutting system for high productivity Suitable for industrial wood processing and production lines Robust and modern construction Technical Specifications General Voltage: 400 V Frequency: 50 Hz Installed power: 12 kW Saw motor power: 5.5 kW Cutting System Saw blade diameter: 500 mm Bore / thickness: 35 / 4.2 mm Cutting speed: 2880 rpm Minimum cutting time: approx. 0.3 s Material Capacity Max. cutting section: approx. 70 × 300 mm Max. workpiece length: approx. 5,100 mm Min. workpiece length: approx. 500 mm Min. cross-section: approx. 30 × 15 mm Performance & Feeding Maximum feed speed: up to 200 m/min Material feed direction: right to left (left to right on request) High-speed automatic processing Compressed Air & Extraction Air pressure: approx. 6–8 bar Air consumption: approx. 500 Nl/min Extraction capacity: approx. 5,000 m³/h Extraction speed: approx. 28–30 m/s Extraction connections: Ø120 mm and Ø100 mm Dimensions & Weight Main unit weight: approx. 2,000 kg Max. output sorting unit load: approx. 500 kg Working height: approx. 1,000 mm Operating Conditions Operating temperature: +5 °C to +40 °C Storage temperature: +5 °C to +40 °C Advantages High cutting speed and precision Reliable industrial design Suitable for continuous operation Dodpfx Agszgr Scegskt Efficient material processing with stable output quality Additional Information CE certified Modern machine (2024) – very good condition

Condition: used, functionality: fully functional, total width: 14,000 mm, shelf height: 3,500 mm, support length: 2,700 mm, This used Nedcon pallet racking system is a robust and space-saving solution for industrial storage requirements. This heavy-duty racking system is ideal for warehouses, logistics, industry, workshops, and forwarding agents. With the durable Nedcon PR2 crossbeams and matching frames, the racking system offers a reliable way to store Euro pallets and heavy load units. PRODUCT DETAILS: Height: approx. 350 cm Dkodpfx Agezy Uhmegst Depth: approx. 110 cm Length: approx. 14 linear meters Shelf load: up to 3,000 kg Bay load: up to 9,000 kg Crossbeams: approx. 270 x 11 x 4 cm PR2 Product number crossbeams: CC1104015 Frames: approx. 350 x 110 cm, pre-assembled Frame color: Blue Crossbeam color: Orange Levels: Ground + 2 Pallet spaces: 45 incl. ground spaces Condition: Used Nedcon DELIVERY SCOPE: 06 x Frames approx. 350 x 110 cm, pre-assembled 20 x Crossbeams approx. 270 x 11 x 4 cm PR2 40 x Locking pins Depending on current stock, we can also offer suitable Nedcon frames with a height of approx. 400 cm. Price: €920.00 Net €1094.80 Gross You will receive an invoice with VAT shown. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams, optionally available - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will be happy to prepare a non-binding offer for you – tailored to your requirements. Whether it is a new construction, renovation or extension – we will advise you competently on your racking configuration. SHOWROOM: Feel free to visit us in our showroom! Here you can get a comprehensive picture of our pallet racking, storage racking and other solutions. Many systems are set up and can be experienced directly. Our technical consultants are available to answer your questions and provide individual advice – we look forward to your visit! Haven't found what you're looking for yet? Visit our website, where you will find a quick overview of many offers & variations of the products! ARE YOU INTERESTED OR DO YOU HAVE ANY QUESTIONS? Simply contact us by message or phone. You will find our telephone number on our company website. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 16:00. Alternatively, you can send us a message with your name and your number, and we will get back to you as soon as possible.

Condition: used, operating hours: 11,562 h, total height: 1,900 mm, total length: 5,600 mm, total width: 2,000 mm, Empty weight: 8.500 kg Price: On request - Documentation available: No - CE certificate present: No - Operating hours: 11562 - Drive system: Conventional - Power [kW]: 30.0 - Centre height [mm]: 500 - Swing over bed [mm]: 1000 - Distance between centres [mm]: 3000 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 2.24 - Max. spindle speed [rpm]: 450 - Transport dimensions: 5600mm x 2000mm x 1900mm (l x w x h) - Transport weight [kg]: 8500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Djdswp H Efspfx Aggjkt Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, turning length: 111,111 mm, We offer you the following: Manufacturer: DMG MORI Model: NTX 3000/1500 Year of manufacture: 2023 Control: DMG Mori Celos with Fanuc F31iB5 Technical specifications: Max. turning diameter: 670 mm Turning length: 1,519 mm Bar capacity: max. 102 mm Travels: x1-axis: 675 mm y-axis: +/- 150 mm z1-axis: 1,562 + 164 mm b-axis: +/- 120° a-axis: 1,542 mm x2-axis: 200 mm y2-axis: +/- 40 mm z2-axis: 1,542 mm Main spindle: Max. speed: 3,000 rpm Drive power: 30/25 kW Torque: 1,194/995 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 111 mm Counter spindle: Max. speed: 4,000 rpm Drive power: 18.5/18.5/15 kW Torque: 599/505/409 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 91 mm Milling spindle: Speed range: 0 – 12,000 rpm Drive power: 28/23 kW Torque: 132/95.3 Nm Tool holder: Capto C6 Number of tool stations: 76 positions Max. tool diameter: Ø 70/Ø 130 mm Max. tool length: 400 mm Max. tool weight: 8 kg Turret: Djdpfxey Sfx No Aggokt Number of tool holders: 12 positions Speed of driven tools: 12,000 rpm Tool holder: BMT40 Torque: 16.9 Nm Rapid traverse speeds: x-axis: 50 m/min y-axis: 40 m/min z-axis: 50 m/min a-axis: 36 m/min x2-axis: 25 m/min y2-axis: 18 m/min z2-axis: 40 m/min b-axis: 100 rpm Operating hours: approx. 4,500 h Spindle hours: approx. 2,200 h Technical features & accessories: − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-400-128 incl. hollow clamping cylinder for main spindle − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-260-78-3Z incl. hollow clamping cylinder for counter spindle − Foot switch for chuck operation − Automatic clamping stroke monitoring of the clamping cylinder for main and counter spindle − Tailstock function for counter spindle − Magazine-side control panel for the tool magazine − Coolant: water-soluble coolant − Chip conveyor (right discharge) − Coolant temperature control/coolant chiller − Coolant spray gun − Float switch for coolant − Coolant shower at main and counter spindle chucks − Compressed air blow-off system for chuck (counter spindle) − Oil mist separator zeroGOF #2 − Oil separator − ICS 70 bar, TMF300 band filter system, 980 l tank − Manual tool presetting device for main and counter spindle − Direct measuring system in x1, x2, y, z1, z2 axes − Spindle sensor measuring system with wireless signal transmission, manuf. Renishaw RMP600 − Universal filter − 3D quickSET − Cycle Alternating Spindle Speed − Cycle "Tailstock Tip at Turret" − Cycle MPC – Machine Protection Control − Cycle MVC – Machine Vibration Control − Synchronous thread cutting without compensating chuck − Increased input resolution to 0.0001 mm − Cs control for tool spindle − Program restart Accessories, illustrated tools, and clamping devices are only included if specified in the additional information. Technical data and details subject to change, errors and prior sale excepted!

Condition: used, Year of construction: 2014, KOVOSVIT MAS MULTICUT 630S x 3000 multi-axis turning center for sale. Heavy-duty multitasking machine configured for complete machining of large and complex components. Machine is equipped with milling spindle, lower turret, right spindle/tailstock, automatic tool changer and hydraulic steady rest system. Machine is currently under power and can be inspected in production. Main configuration: MULTICUT 630S x 3000 Siemens SINUMERIK control with SHOPTURN Right spindle / tailstock Milling spindle with high-pressure coolant Automatic tool changer 120 tool positions CAPTO C8 Magazine for 3 boring bars with automatic exchange B-axis prepared for automatic boring bar clamping Hydraulic steady rest K5.1 Ø100–410 mm High-pressure coolant through spindle – 60 bar External coolant system Chip conveyor Automatic door opening Central lubrication Machine status signal lamp Electrical cabinet with air conditioning Prepared for bar feeder USB and Ethernet connection Tool measuring probe Viviport spin windows in doors Technical details: CAPTO C8 system Max boring bar length: 500 mm Max boring bar weight: 12 kg Through hole right spindle: Ø127 mm 10,000 rpm spindle option Djdpjy U Nacjfx Aggekt S1/S6 spindle power: 37/47 kW Spindle torque: 140/180 Nm Machine hours: System power on time: 52,270 h Machine power on time: 49,264 h Automatic cycle time: 9,599 h

Condition: excellent (used), Year of construction: 2016, operating hours: 4,742 h, "RSA High-Performance Sawing, Deburring, Cleaning, and Drying Center" for Steel Tubes The processing center consists of: 1) RSA Precision High-Speed Saw RASACUT SC 3000 with bundle loader 2) RSA transfer system between the RSA Precision High-Speed Saw RASACUT and the RSA Deburring System RASAPLAN XY 3000 3) RSA Deburring System RASAPLAN XY 3000 4) Extraction system/wet separator for the RSA Deburring System RASAPLAN XY 3000 5) RSA Cleaning System RASACLEAN ET 3000 6) RSA Drying System TURBODRY Bundle loader extended for tubes up to 6,200 mm TECHNICAL DATA Tube diameter: 6 mm to 55 mm Wall thickness: 1 - 6 mm Bar weight: max. 10 kg/m Material: steel Magnetism: max. 3 Gauss Output length: 6,200 mm Sawable lengths: 150 - 3,000 mm Restriction: Ø 6 – 7.9 mm max. length: 1,200 mm Ø 8 – 9.9 mm max. length: 1,500 mm Ø 10 – 12 mm max. length: 2,000 mm Dedpfx Asy E Iypeggekt Length tolerance: Ø 6 - 49 mm +/- 0.2; Ø 50 - 55 mm +/- 0.25 SAW BLADE DATA Saw blade diameter: max. 315 mm Bore: 40 mm Auxiliary holes: 4 x 12 mm Pitch circle: 64 mm NEW PRICE: €390,000

Condition: used, Year of construction: 2006, with automatic lifting table feeding system with 4 precision spindles, ensuring the stack is always held evenly at the correct level. Equipped with 4 powered roller groups. Lifting table dimensions: 6000 x 2200 mm. Feeding side: left (from the operator's perspective). Max. stack height: 450 mm. Lifting table height (bottom): to be defined. Speed for lifting and lowering: 0.7 m/min. Lifting table drive: 3 kW. Powered roller group: 4. STANDARD CONFIGURATION. Usable cutting length: 6000 mm. Lifting table feeding: Yes. Working height: 950 mm. Saw blade overhang: 100 mm. Clamping device opening: 117 mm. Machine control: G Drive RT. Number of clamping devices movable in X: 1. Number of clamping devices movable in X and Y: 1. Number of fixed clamping devices: 1. Min. material thickness (with side alignment): 10 mm. Min. material thickness (with lifting table feeding): 10 mm. Min. panel dimension (with lifting table feeding): 2400x1200 mm. Max. panel dimension (with lifting table feeding): 5500x2070 mm. Max. panel dimension (without lifting table feeding): 5800x2010 mm. Safety device according to CE: included. Supply voltage: 400 V / 50 Hz. MACHINE CONFIGURATION. Machine bed: The machine bed structure made of steel is welded using arc welding and then milled and finished on CNC machines. The rigid structure of the machine bed guarantees both high cutting quality with high cutting speed, as well as the enormous durability of the entire machine. Saw blade overhang: 100 mm. Power of main saw motor: 7.5 kW. Power of scoring saw motor: 2.2 kW. Diameter of main saw blade: 400 mm. Diameter of scoring saw blade: 215 mm. Feed rate of saw carriage: Forward: 1-170 m/min. Return: 170 m/min. Motorization of saw carriage feed: Servo drive. Diameter of dust extraction port (bottom, 1x): 200 mm. Diameter of dust extraction port (top, 2x): 115 mm. Thanks to the rigid machine bed construction, the masses are distributed in the best possible way, which prevents twisting and thus guarantees an absolutely vertical run of the saw blade. Machine table made of steel with individual, removable support elements made of high-quality, durable material. The saw carriage runs on two round guides, which are mounted horizontally on one level. Large prism rollers (diameter 86 mm), with spring-loaded counter rollers, ensure smooth linear feed, as well as very low contact pressure and enables virtually wear-free operation of the saw carriage. The weight and forces acting on the saw carriage are evenly distributed on the two guides (50/50) and on each individual prism roller. The saw carriage runs absolutely without lubricant on the guides. The two guides are located away from the cutting line, outside the direct dust area. The diameter of the guide rods is 40 mm, making them the largest and most stable guides used in this sector. Pneumatic quick clamping system; for quick and convenient tool changes. This system is extremely reliable in operation, as it is mechanically clamped via a flange with a bayonet lock and spring force and unlocked via a pneumatic quick coupling. The flange must be rotated by approx. 10° in order to remove it. Due to excellent accessibility and the fact that the operator does not need any other tools, the tool change is very easy and can be carried out in seconds. The scoring saw adjustment is made from the outside. Dsdpfxozn N Iko Aggokt

Condition: used, Year of construction: 2014, workpiece weight (max.): 25,000 kg, total length: 10,000 mm, total height: 6,000 mm, total width: 10,000 mm, overall weight: 60,000 kg, DÖRRIES SCHARMANN VCE 3000 / 280 CNC Vertikaldrehmaschine Modernisierung: im Rahmen des Retrofits im Jahr 2014 auf Siemens SINUMERIK 840D SLArbeitsbereichTi schdurchmesser: 2.800 mm Max. Umlaufdurchmesser / Drehdurchmesser: 3.000 mm Max. Tischbelastung: 25.000 kg Max. Drehhöhe: ca. 2.100 mm Verfahrweg X-Achse: ±1.550 mm Verfahrweg Z-Achse / RAM-Hub: 1.500 mmHauptantrieb und SpindelnHauptantrieb: Siemens-Hauptmotor Antriebsleistung: 130 kW Max. Spindeldrehzahl: 4.500 min⁻¹ Betriebsart: S6, 40 %Ausstattung: 2 vertikale SpindelnWerkzeugwechsler und Peripherieo    2 automatische Werkzeugwechslero    Kühlschmierstoffanlageo    Späneförderero    Ölnebelabsaugungo    2 separate HydraulikaggregateBetriebsstunden: ca. 12.571 Stunden laut mechanischem Betriebsstundenzähler Table diameter: 2,800 mm Dodpfx Aezmkzpjggekt Control: Siemens SINUMERIK 840D SL Component weight max.: 25,000 kg Swing: 3,000 mm Rotation height max.: 2,100 mm Weight approx.: 60,000 kg Dimensions (LxWxH) approx.: 10000 x 10000 x 6000 mm Year of construction: 2,014 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: No

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, For sale: a flake ice machine from Maja Type: RVH3000 Year of manufacture: 2018 with self-cleaning system MAJA-SCS with touch control panel Technical data: Ice production capacity: approx. 3000 kg/24 h - approx. 125 kg/h Evaporation temperature: -21°C for refrigerant: R 449 A (GWP 1397) / R 404 A (GWP 3922) Dimensions (W x D x H): 1730 x 675 x 525 mm Weight: approx. 215 kg Dkodey Uwunjpfx Agget without refrigeration unit

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 152290, SPECTRO SPECTROMAXX optical emission spectrometer (OES), floor model (2020). Serial number: 152290 Wavelength range: 140-670 nm Dimensions (floor model): approx. 790 x 625 x 1350 mm (L x W x H) Condition: - Used in a professional QC laboratory - Fully operational - Annually maintained and calibrated - Last calibration: October 2025 Included: - PC with licensed software (Spark Analyzer Pro MAX) Dkedpjzxgtxjfx Aggot - Analytical programs (Fe, Al, Ti, Cu, Ni) - Accessories (wire adapters, spark stand, ceramic discs, etc.) - Ready for immediate use Delivery: costs to be determined (EXW) Reason for sale: Optimization of laboratory capacity

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 60 h, +++ Demo machine, approx. 60 operating hours +++ +++ Descending Die +++ Basic machine: TruPunch 3000 large format (S20) Machine: - Box frame - Hybrid axis system - Linear tool magazine with 24 stations for clamps and tools - Hydraulic clamps (3x) - Drives with maintenance-free three-phase motors - Repositioning with programmable presser foot - Foot switch to close clamps - Part chute, right - Part removal flap, left - Sensor for part removal flap - SortMaster Compact retrofit-prepared Punching head: - Delta Drive - Rotating single-station tool adapter - Programmable presser foot position - Tool length compensation - Punch spray lubrication - Punching slug vacuum - Forming function - Punch stroke counter Dedpjxmfc Usfx Aggjkt Control: - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Auto-shutdown - Remote support interface - Program manager - Production plan Data transmission: - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Double-beam safety light barrier Advanced standard configuration: - First index pin (inside right) - Ball tables - Part chute for finished part container - Chip container to rear for removal Advanced machine and punching features: - MultiTool function - MultiShear function - MultiBend function - Tapping function with thread counter - Forming tap breakage control - Lubricant level monitoring - Unlimited time license - Marking/Quick beading function (option) - Engraving function - Deburring and roller technology function - Adaptive stroke calibration - StripLine - Die spray lubrication with fill level monitoring - Descending Die - Integrated flattening function - Smart punch monitoring - Additional clamp - Height-adjustable clamp - Vibration damping - Chip container removed to front - Brush tables with loading and unloading assistance - Warped sheet detection Technical data TruPunch 3000 large format (S20) Dimensions / Weight: Width: 7644 mm Depth: 7666 mm Height: 2200 mm Weight (fully equipped): 13,800 kg Control / Hardware / Electrics: Hard disk type: SSD Number and size of hard disks: 2 x 120 GB Customer program memory: 10 GB Display: Touchscreen Display size: 21.5 in Interfaces: USB Network: RJ45 Control type: Bosch CML75 Operating system: Windows 10 IoT Axis data: X/Y/C axis drive: NC-controlled, maintenance-free three-phase servo motors Punching head drive: Electric Max. X axis speed: 90 m/min Max. Y axis speed: 60 m/min Max. simultaneous axis speed: 108 m/min Max. C axis speed (punching): 350 rpm Max. C axis speed (tapping): 350 rpm Max. punching stroke rate (E=1mm): 690 1/min Max. marking stroke rate: 1000 1/min Accuracy — positioning deviation Pa: +/- 0.1 mm Accuracy — position range Ps: +/- 0.03 mm Smallest programmable increment: 0.001 mm Working range / Workpiece size: Max. sheet thickness: 6.4 mm Max. workpiece weight: 230 kg X axis working range: 3000 mm Y axis working range: 1550 mm Punch-specific data: Max. punching force: 180 kN Max. presser foot force: 20 kN Max. tool size, punching (outer diameter): 76.2 mm Max. tool size, forming (outer diameter): 101.6 mm

Condition: used, Year of construction: 2013, functionality: fully functional, spindle bore: 105 mm, turning diameter: 800 mm, turning length: 3,000 mm, quill stroke: 240 mm, quill diameter: 100 mm, spindle speed (max.): 720 rpm, spindle speed (min.): 7 rpm, bed width: 600 mm, overall weight: 5,500 kg, rapid traverse X-axis: 4 m/min, rapid traverse Z-axis: 2 m/min, workpiece weight (max.): 2,000 kg, IMTI SDM 800/3000 – USED HEAVY-DUTY LATHE An IMTI SDM 800/3000, manufactured in 2013, from a company liquidation. Originally an exhibition/demonstration machine in our showroom, sold to the previous owner in 2016. Inspection on-site or via video call is possible at any time. KEY FEATURES - Conventional guide and lead screw heavy-duty lathe, center distance 3,000 mm - Multifix quick-change tool holder with 4 tool holders - 4-jaw faceplate Ø 800 mm, 3-jaw chuck Ø 500 mm - 3-axis digital display SINO SDS6-3V TECHNICAL DATA - Swing over bed: 800 mm - Swing over cross slide: 1,000 mm - Swing over carriage: 480 mm - Center distance: 3,000 mm - Bed width: 600 mm - Spindle bore: 105 mm, spindle nose DIN 55027 size 11 - Spindle taper: Ø 120 mm, taper 1:20 - Spindle speeds: 7-720 rpm - Thread cutting: metric 1-240 mm (52 steps), inch 1-14 (26 steps), module 0.5-120 mm (53 steps) - Longitudinal feed 0.1-24.3 mm/rev, cross feed 0.05-12.5 mm/rev - Rapid traverse longitudinal/cross: 4,000 / 2,000 mm/min - Tool toolbit cross-section: 50 x 50 mm - Cross slide travel: 420 mm, top slide: 200 mm - Tailstock quill Ø 100 mm, taper MK 6, stroke 240 mm - Fixed rest Ø 20-200 mm, traveling rest Ø 20-100 mm - Main motor: 11 kW, rapid traverse motor: 1.1 kW - Workpiece weight between centers: max. 2 t, in chuck: max. 500 kg - Total weight: approx. 5,500 kg STANDARD EQUIPMENT - Multifix quick-change tool holder size D1 with 4 tool holders - 4-jaw faceplate Ø 800 mm, 3-jaw chuck Ø 500 mm incl. chuck flanges 350/500 mm - 3-axis digital display SINO SDS6-3V - Fixed rest Ø 20-200 mm, traveling rest Ø 20-100 mm - Complete coolant system - Fixed center, drive plate, change gears - Electrical end stop longitudinal, halogen machine lamp - German and English technical documentation incl. CE declaration of conformity - 400 V, 50 Hz, 3-phase CONDITION Used machine, manufactured in 2013, from a company liquidation. Sold “as is”, no warranty. Inspection on-site or via video call is highly recommended. Dkodpfx Agezi Dhbsgjt OUR SERVICE Online or on-site factory visit, transport organized upon request, assembly, commissioning and operator training by our service technicians, direct German-speaking contact for spare parts and support, member of the FDM, the trade association for wholesale trade in machines and tools. Since this is a single item, subject to prior sale. Please call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: used, This listing is for a QuattroFlow QF150 Diaphragm Pump. The unit is in full working condition and is ready for immediate release. The Quattroflow 150S is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech,food or cosmetic research centres or plants Examples: • Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) • Solutions of polymers or suspensions (silicon, latex, chromatography media) • Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) • colloidal solutions • Suspensions of viruses or phage • Dairy products • Gelatine • Supplements and ingredients for cosmetic and food Flow rate max.: Eccentric shaft 3° l/h (lpm) 100 (1.67) 100 (1.67) Eccentric shaft 5° l/h (lpm) 180 (3) 180 (3) Flow rate min.: Eccentric shaft 3° l/h (lpm) 1 (0.017) 1 (0.017) Djdpoxx Avpjfx Aggskt Eccentric shaft 5° l/h (lpm) 1 (0.017) 1 (0.017) Pressure: Temperature of fluid < 40°C bar (psi) 6 (87) 6 (87) Temperature of fluid > 40°C bar (psi) 4 (58) 4 (58) Temperature max.: Fluid °C (°F) 80 (176) 80 (176) CIP °C (°F) 90 (194) 90 (194) SIP °C (°F) 130 (260) 130 (260) Autoclave °C (°F) 130 (260) 130 (260) Suction lift dry at: 3000 rpm 3000 rpm Eccentric shaft 3° m (ft) 1-1,5 (3.2-4.9) 1-1,5 (3.2-4.9) Eccentric shaft 5° m (ft) 2-3 (6.6-9.8) 2-3 (6.6-9.8) Volume specifications: Approximated volume per revolution at free output ml 0,72 (3°) 1,2 (5°) 0,72 (3°) 1,2 (5°) Filling volume without connectors ml 15 15 Residual volume (after idle with highspeed motor) ml 1-3 1-3 Product wetted surface (approx.) cm² (inch²) 112 (17) 112 (17) Speed range pump rpm 10-3000 10-3000 Connection specification inlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm (inch) 25 25 Internal diameter mm (inch) 4,7 4,7 Connection specification outlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm 25 25 Internal diameter mm (inch) 4,7 (0.19) 4,7 (0.19) Position of connectors Inline Inline Number of flow directions 4 4 Diameter drive shaft mm 7 7 Product wetted materials (standard): Pump housing SS316L SS316L Valve plate SS316L SS316L Diaphragms Santoprene Santoprene Valves EPDM EPDM O-rings EPDM EPDM Non-product wetted materials (standard): Pump housing SS316L SS316L Bearing housing SS316L SS316L Base plate SS316 SS316 Hood SS316 SS316 Dimensions pump with motor and housing: Length mm (inch) 257 (10,2) 277 (10-91) Width mm (inch) 164 (6,5) 200 (7,87) Height mm (inch) 185 (7,2) 195 (7,67) Weight pump with motor and housing kg (lb) 9,8 (22) 11,2 (25) IP protection class pump IP 54 54 Operating temperature range °C (°F) 0…40 (32…104) 10…30 (50…86)

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,200 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 115 mm, spindle motor power: 30,000 W, overall weight: 6,850 kg, controller manufacturer: OKUMA, controller model: OSP-P300LA, number of axes: 5, This 3-axis Okuma LB 3000 EX II was manufactured in 2022, featuring a robust horizontal turning capability. It includes an Iemca KID 80 bar feeder, a 250 mm SMW chuck, and a 170 mm Kitagawa chuck. With a main spindle motor power of 22 kW and rotational speeds up to 6000 rpm, it ensures efficient turning operations. If you are looking to get high-quality turning capabilities consider the Okuma LB 3000 EX II machine we have for sale. Contact us for more information. • Distance between spindle noses: 1085 mm • Maximum turning diameter: 340 mm • Bar capacity through main spindle draw tube: 80 mm • Sub spindle bore: 63 mm • Bar capacity through sub spindle draw tube: 52 mm • Rotational speed of driven tools: 45–6000 rpm • Control: Okuma OSP P300L (OSP Suite), 15" screen • Configuration: Main spindle (left) + sub-spindle (right), Y-axis, turret with driven tools (radial tool mounting) • Max turning diameter: 340 mm • Spindle speeds: • Left (main): 42–4,200 rpm • Right (sub): 50–6,000 rpm • Spindle motors: • Left (main): PREX 30/22 kW • Right (sub): PREX 11/7.5 kW • Special main spindle (“Big Bore” option): Ø91 mm, nose JIS A2-8, 42–4,200 rpm, PREX 30/22 kW, max torque 700 Nm • Control/monitoring functions: • Spindle orientation • Cutting load monitoring (“Load Monitor”) selectable for all axes and spindles • One-Touch IGF M-E conversational programming • Tool life monitoring: by workpiece count, by cutting engagement time, by cutting load; automatic sister-tool change or stop/alarm if no replacement • Machine options: Additional flushing for left slideway covers Additional equipment • 250 mm SMW chuck on the main spindle • 170 mm Kitagawa chuck on the sub spindle Dkjdpex D Rvnsfx Agget • 6 sets of soft jaws • 4 straight driven tool holders • 4 angled driven tool holders • 2 double turning tool holders • 4 boring bar holders • 8 standard turning tool holders • 8 straight ER holders with about 30 ER collets • Workholding (chucks) • SMW‑Autoblok BBD250‑77 / A8, hydraulic 3‑jaw chuck • Includes: 1 set soft top jaws, hydraulic cylinder VN170‑77, drawtube ID 72 with cylinder flange • Max speed: 4,000 rpm; bar capacity: Ø72 mm • Kitagawa B206 (Ø170 mm), hydraulic 3‑jaw chuck • Includes: 1 set soft top jaws, hydraulic cylinder SR1146, drawtube/cylinder flange, ejector • Max speed: 6,000 rpm • Part handling • Part catcher, swing-bucket type, Ø80 × L150 mm, max 5.8 kg • Chip management • Cromar chip conveyor for LB3000 EX II C1000, slat type, right-hand discharge • Bar feeding and interfaces • Bar feeder interface (OSP P300L) • IEMCA KID 80+ bar feeder (SX – Left) for Okuma LB3000 EX II • Includes: 7" touchscreen HMI, mechanical/electrical interface kit, additional light kit, roller guide kit for round/hex bars, spindle extension, bar pusher D=26 mm, bar pusher D=15 mm, paper manuals • Accessories: Floor frame for longitudinal movement in Z; spindle liner/reduction tube Technical Specification Counter Spindle Yes Driven Tools No