Used Muratec Muratec Mt 25 My for sale (17,231)

Condition: ready for operation (used), Bosch ASM 25 Servo Drive SN: 302650 DC 520V, used, normal signs of use, 100% functional, delivery contents as per photos Bwodpemgwufsfx Al Aju

Condition: ready for operation (used), Heidenhain QSY 190F EcoDyn SN: 25 342 980 C, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this item. Please ask for price separately! Bwedpfx Alou T Uvio Asu

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,688 h, load capacity: 2,500 kg, lifting height: 5,180 mm, free lift: 1,760 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,380 mm, battery capacity: 620 Ah, remaining battery capacity: 93 %, battery voltage: 80 V, DGUV certified until: 10/2027, fork length: 1,200 mm, total height: 2,380 mm, Equipment: 3rd hydraulic function, CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-25/600 electric forklift with the following specifications: * Operating hours: 1,688 * Lifting capacity: 2,500 kg * Lifting height: 5,180 mm * Overall height: 2,380 mm * Year of manufacture: 2017 STILL 2.5-ton electric forklift with a full cabin and heating, battery at 93%, tires in good condition (rear tires new), triplex mast with full free lift, side shifter, lighting compliant with German Road Traffic Licensing Regulations (StVZO), fork length 1,200 mm (other fork lengths available upon request), new charger. Includes 1,000 hours of service according to STILL manufacturer specifications and a valid occupational safety inspection upon sale. Bwodpfxozfxzzs Al Aou Inspection, demonstration, and test drive are available by appointment. Sale is exclusively to commercial businesses; subject to prior sale, errors, and omissions. We can deliver your new forklift cost-effectively using our own ramp-equipped low-loader (transport costs upon request). Further information about us and other offers can be found on our website.

Condition: ready for operation (used), Brinkmann TC 25 / 810+100 submersible pump, serial number: 0313002815-19535001, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Bwsdpfxsi D Hmhe Al Aou

Condition: new, Year of construction: 2025, x-travel 580 mm y-travel 200 mm z-travel 340 mm speeds 115 - 1750 U/min table surface area 1000 x 240 mm tool taper ISO 40 total power requirement 4,5 kW weight of the machine ca. 820 kg dimensions of the machine ca. 1290 x 1090 x 2170 mm Universal precision drilling and milling machine for horizontal and vertical milling work with digital 3-axis position display DPA 31 Plus Description: - Heavy, solid design made of high-quality, vibration-absorbing gray cast iron - Oil bath gear with ground, hardened gear wheels - Coolant system - Halogen machine lamp with bundled beam - Solid and large cross table, precisely surface-machined Bjdpfxstv Riaj Al Ajwu with T-slots and adjustable wedge strips - Milling head can be tilted ± 45° - Right/left rotation - X-axis moves either with the handwheel or via the table feed device - Automatic limit switch on the X-axis - Height-adjustable protective screen with microswitch, against flying chips and parts, for the greatest possible protection of the user Scope of delivery: - Gear rim drill chuck 1 - 16 mm / B 18 - Arbor drill chuck ISO40 / B18 - Horizontal milling spindle with counter bearing, disc milling cutter holder Ø22 mm, Ø27 mm - Adapter ISO 40/MK3 - Adapter ISO 40/MK2 - Vertical and horizontal drawbar - T-slot nuts - Drifter - Operating tool

Condition: good (used), For sale: PROMECAM PPH 25.12B press brake – French made. AMADA PROMECAM *Technical specifications:* - Force: 25 tons - Usable length: 1250 mm - Motorized back gauge on Y-axis and manual back gauge on X-axis, with digital readout on a remote control panel (2 counters) New 2009 tooling including dies and new 1010 punches. Videos available upon request. Bodpozyyi Nefx Al Ajwu

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 25 mm -Dimensions: see photo technical drawing -Overall dimensions: 80/75/H55 mm -Total weight: 1.5 kg Bwodpezzqp Asfx Al Aou

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 25 mm -Dimensions: see photo technical drawing -Overall dimensions: 80/75/H55 mm Bwodpfxozzqqas Al Asu -Total weight: 1.6 kg

Condition: ready for operation (used), Year of construction: 1999, pressure 80.0 t chamfer lenght 2570 mm distance between columns 2125 mm column arm 420 mm Bwodpfxeyyc Dfj Al Aju table width 60.0 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec stroke 200 mm dayligth 470 mm table height 960 mm Number of working hours ~ 33.100 h oil volume 90.0 l total power requirement 9.0 KW weight of the machine ca. 5750 kg. range L-W-H 3630 x 2450 x 2550 mm - in checked conditions - machinevideo - ?v=SskqZJdQxsQ ?v=KcKjibwWAKI Equipment: - AMADA CNC control, model OPERATEUR II * Manual control for fine adjustment of the axes - CNC control OPERATEUR 2 in 8 axes (X1 X2,Y1 Y2,R1 R2,Z1 Z2) - CNC-controlled backgauge adjustment (X1 X2) - CNC-controlled vertical adjustment of the fence fingers (R1 R2) - CNC-controlled adjustment of the stop fingers left-right (Z1 Z2) - Swivel operation, front left - 1x freely movable foot switch - Top tool holder with top wedge crowning (AMADA system) - Rear safety guard (safety grid) - Side safety guard (safety doors) - CE marking - Original operating instructions * Further technical data : Adjustment range : X axis ... 700 mm X axis with workpiece in place ... 1020 mm R axis .. 250 mm Adjustment speed : X axis .. 500 mm/sec R axis ... 160 mm/sec Z1 Z2 axis .. 1000 mm/sec Positioning accuracy ± in mm : X axis .. 0.1 R axis .. 0.1 Z axis .. 1.0

Condition: used, Year of construction: 2004, Technical details turning diameter 210 mm turning length 700 mm control Okuma OSP-E 100 L total power requirement 35,7 kVA weight of the machine ca. 7,1 t dimensions of the machine ca. 2660 x 2000 x 2330* mm Additional information CNC turning and milling center with C-axis and Y-axis, 2 turrets, and subspindle. The machine is being sold partially overhauled. CNC control: Okuma OSP-E 100 L Maximum turning diameter: 210 mm Swing over bed: 400 mm Distance between spindle noses: 960 mm Bwodpfxjzzwmuo Al Aou Main spindle: Spindle bore: 53 mm Speed range: 50 to 6000 rpm Motor power: 11/7.5 kW Subspindle: Spindle nose: JIS A2-6 Speed range: 38 to 5000 rpm Motor power: 11/7.5 kW Z-axis: Travel: 700 / 700 mm (ZA + ZB) Rapid traverse: 40000 mm/min W-axis: Travel: 940 mm Rapid traverse: 40000 mm/min X-axis: Travel: 167 / 192 mm (XA + XB) Rapid traverse: 30000 mm/min Y-axis: Travel: 92 mm (+50/-42 mm) Rapid traverse: 15000 mm/min C-axis: Indexing: 360 x 0.001 deg. Rapid traverse: 400 rpm Disc turret: 2 x 12 stations Tool holder mount: VDI 30 mm Power of driven tools: 4 kW Total connected load: 35.7 kVA Machine weight: 7100 kg Machine dimensions: 2660 x 2000 x 2330 mm* Plus swarf conveyor and bar loader Accessories FMB Turbo 5-42/6200/A bar loader, year of manufacture 2005 Chip conveyor Coolant system Collet chuck for main and subspindle Both turrets equipped with tool holders Machine documentation.

Condition: excellent (used), axle configuration: 1 axle, permissible axle load (axle 1): 10,000 kg, first registration: 12/2009, loading space length: 10,620 mm, loading space width: 2,500 mm, loading space height: 2,500 mm, total length: 11,070 mm, total width: 2,600 mm, suspension: air, tire size: 275/70 R22.5, wheelbase: 6,280 mm, color: other, Year of construction: 2009, Equipment: ABS, tail-lift, = Further options and accessories = - Rear doors - Air suspension - Side door = Further Information = Axle configuration Tyre size: 275/70 R22.5 Brakes: Disc brakes Suspension: Air suspension Bodpfx Aloyu Skpo Aswu Rear axle: Max. axle load: 10,000 kg; Steered; Tyre tread left: 30%; Tyre tread right: 30% Weights Unladen weight: 8,220 kg Payload: 13,780 kg gross vehicle weight (GVW): 22,000 kg Functionality Tail lift: Dhollandia Refrigeration unit: Diesel and electric (7,410 operating hours diesel) Maintenance APK (general technical inspection): Valid until 12/2026 Condition Technical condition: Very good Visual condition: Very good Damage: None Identification Registration: OK-38-YK

Condition: new, power: 55 kW (74.78 HP), fuel type: diesel, color: other, lifting height: 17,550 mm, Year of construction: 2026, operating hours: 5 h, Equipment: air conditioning, Technical information Number of cylinders: 4 Engine capacity: 3.621 cc Engine type: Deutz TD 3.6 L4 Empty weight: 11.630 kg Dimensions (LxBxH): 615 x 236 x 245 cm Functional Lifting capacity: 4.000 kg Bwsdpfxez Aakfs Al Asu Maximum reach: 1.308 cm Quick coupler system: Yes CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - Beacon(s) - Blower - Electric windows - Mudguards - Pallet forks - Quick change - Support legs - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage V / Tier IV final General Country of production: Frankrijk New Manitou MT 1840 75D with Air Conditioning

Condition: new, Year of construction: 2024, fuel type: diesel, power: 74 kW (100.61 HP), gearing type: hydrostat, fork length: 1,200 mm, total height: 2,450 mm, total length: 6,270 mm, total width: 2,420 mm, color: red, Lifting capacity: 4,000 kg. Maximum lifting height: 17.550 m. Maximum forward reach: 13.080 m. Unladen weight: 12,560 kg. Fork length: 1,200 mm. Controls: JSM joystick. For export outside the EU only. = Further information = Transmission: Torque converter Bedpozqdrpefx Al Aewu Year of manufacture: 2024 Unladen weight: 11,260 kg Lifting capacity: 4,000 kg

Condition: used, Year of construction: 1995, x-travel 650 mm y-travel 410 mm z-travel 410 mm Control Mitsubishi Meldas 50 M max. turning speeds 6.000 min/-1 tool taper SK 40 Used, untested Additional information – Machine weight: approx. 4,200 kg Dimensions (L x W x H): approx. 2,400 x 2,400 x 2,500 mm Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to changes and errors in technical data and specifications, Bwjdpfx Aszz S R Usl Aju as well as prior sale!

Condition: used, Year of construction: 2023, load capacity: 2,500 kg, lifting height: 6,130 mm, total length: 3,620 mm, - Geräteart Elektro - Bedienung Sitz - Lastschwerpunkt 500 mm - Lastabstand 420 mm - Achslast vorne mit Last kg 6335 - Achslast hinten mit Last kg 816 - Achslast vorne ohne Last kg 2393 - Achslast hinten ohne Last kg 2258 - Bereifung Superelastik - Spur vorne mm 992 - Spur hinten mm 900 - Neigung Hubgerüst/Gabelträger, vor ° 3 - Neigung Hubgerüst/Gabelträger, zurück ° 9 - Sitzhöhe/Standhöhe (SRP) mm 1139 - Kupplunghöhe mm 485/365 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 3654 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 3852 - Wenderadius mm 2032 - kleinster Drehpunkt mm 539 - Fahrgeschwindigkeit mit Last km/h 19 - Fahrgeschwindigkeit ohne Last km/h 20 - Hubgeschwindigkeit mit Last m/s 0,46 - Hubgeschwindigkeit ohne Last m/s 0,55 - Senkgeschwindigkeit mit Last m/s 0,52 - Senkgeschwindigkeit ohne Last m/s 0,45 - Zugkraft mit Last N 8000 - Zugkraft ohne Last N 8110 - Max. Zugkraft mit Last N 17440 - Max. Zugkraft ohne Last N 17220 - Steigfähigkeit mit Last % 21,3 - Steigfähigkeit ohne Last % 29,5 - Max. Steigfähigkeit mit Last % 25,5 - Max. Steigfähigkeit ohne Last % 29,7 - Beschleunigungszeit mit Last s 4,5 - Beschleunigungszeit ohne Last s 4,2 - Betriebsbremse elektr./mech. Bjdpfsxd E Thex Al Aewu - Fahrmotor, Leistung KB 60 min kW 15 - Hubmotor, Leistung bei 15 % ED kW 16,3 - Batteriespannung V 80 - Arbeitsdruck für Anbaugeräte bar 250 - Ölmenge für Anbaugeräte l/min 30

Condition: new, Year of construction: 2023, load capacity: 3,300 kg, lifting height: 9,070 mm, fork length: 1,200 mm, total length: 5,929 mm, · Schüttwinkel: 12 Grad · Kippwinkel 114 Grad · Heben: 8,90s · Senken: 5,70s · Wenderadius (über Räder): 3,80m · Teleskop ausfahren: 14,6s · Teleskop einfahren: 8,80s · Ankippen: 3,30s · Auskippen: 3,10s · Motomom: Stage V / Tier 4 final · Anzahl der Zylinder / Tragfähigkeit: 4 - 3621 cm³ · Nennleistung Verbrennungsmotor - Leistung (kW): 75 Hp / 55 kW · Max. Drehmoment / Motordrehzahl: 340 Nm @ 1600 rpm · Zugkraft 7320 daN Bsdpfsxd Hxlox Al Aewu · Anzahl der Gänge (v/h): 4/4 · Maximale Geschwindigkeit: 24,90 km/h · Hydraulikfördermenge / Hydraulikdruck: 92,7 l/min / 260 bar · Motoröl: 10l · Hydrauliköl: 128l · Fassungsvermögen des Kraftstofftanks: 120l · Geräuschpegel im Fahrerstand (LpA): 79 dB · Umgebungsgeräusch (LwA): 104 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Lenkräder (vorne / hinten) 2 / 2 · Sicherheit Zulassung der Kabine: Standard EN 15000 / Cabin ROPS - FOPS Level 2 · Max. Hubhöhe: 9,07 m · Max. Auslage: 6,35 m · Ausbrechwinkel mit Schaufel: 5770 daN

Condition: used, Year of construction: 2023, load capacity: 2,500 kg, lifting height: 6,120 mm, fork length: 1,200 mm, total length: 3,650 mm, - Geräteart Elektro - Bedienung Sitz - Lastschwerpunkt 500 mm - Lastabstand 420 mm - Achslast vorne mit Last kg 6335 - Achslast hinten mit Last kg 816 - Achslast vorne ohne Last kg 2393 - Achslast hinten ohne Last kg 2258 - Bereifung Superelastik - Spur vorne mm 992 - Spur hinten mm 900 - Neigung Hubgerüst/Gabelträger, vor ° 3 - Neigung Hubgerüst/Gabelträger, zurück ° 9 - Sitzhöhe/Standhöhe (SRP) mm 1139 - Kupplunghöhe mm 485/365 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 3654 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 3852 - Wenderadius mm 2032 - kleinster Drehpunkt mm 539 - Fahrgeschwindigkeit mit Last km/h 19 - Fahrgeschwindigkeit ohne Last km/h 20 - Hubgeschwindigkeit mit Last m/s 0,46 - Hubgeschwindigkeit ohne Last m/s 0,55 - Senkgeschwindigkeit mit Last m/s 0,52 - Senkgeschwindigkeit ohne Last m/s 0,45 - Zugkraft mit Last N 8000 - Zugkraft ohne Last N 8110 - Max. Zugkraft mit Last N 17440 - Max. Zugkraft ohne Last N 17220 - Steigfähigkeit mit Last % 21,3 - Steigfähigkeit ohne Last % 29,5 Bjdpfx Aeyt Skyol Aswu - Max. Steigfähigkeit mit Last % 25,5 - Max. Steigfähigkeit ohne Last % 29,7 - Beschleunigungszeit mit Last s 4,5 - Beschleunigungszeit ohne Last s 4,2 - Betriebsbremse elektr./mech. - Fahrmotor, Leistung KB 60 min kW 15 - Hubmotor, Leistung bei 15 % ED kW 16,3 - Batteriespannung V 80 - Arbeitsdruck für Anbaugeräte bar 250 - Ölmenge für Anbaugeräte l/min 30

Condition: used, Vacuum pump, vane cell pump, rotary vane pump WERIE RIETSCHLE Model CLFTL 25 DV Device No.: 481579 Delivery rate: 25 m3/h Vacuum: -0.6 bar (test run: -0.66 bar) Bsdpfx Ajxciwnjl Aswu Vacuum level: 60% Motor speed: 1,400 rpm Motor power: 1.4 kW Power supply: 220 Volt, 50 Hz - Dry-running pump without oil lubrication - Threaded connection for suction and pressure line: 1/2" Dimensions (L x W x H): 600 x 360 x 270 mm Weight: 50 kg Good condition

Condition: used, maximum load weight: 895 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 07/2021, loading space length: 1,975 mm, loading space width: 1,275 mm, total width: 1,960 mm, total height: 590 mm, A29 GW26G000232 Motorcycle trailer for 3 motorcycles, Manufacturer: STEMA, Model: SHM 13-25-18.1, * 100 km/h version with installed shock absorbers * Integrated ramp rail in every standard version * Low loading platform and long ramp rail * Convenient loading and unloading * Smooth driving behavior and robust chassis * Stable wheel brackets for secure motorcycle support Bsdoyn Ub Dopfx Al Aowu * Side rails (optional) * Numerous additional lashing points * Manufactured according to EC regulations * Side underrun protection bars on both sides 1,300 kg, high-loader, inertia braked, 100 km/h, high-loader, for 3 vehicles, with 2 loading ramps behind the license plate, converted to 13" tires Loading height: 580 mm Errors and prior sale excepted.

Condition: used, maximum load weight: 622 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 05/2025, loading space length: 1,975 mm, loading space width: 1,444 mm, total width: 1,550 mm, total height: 600 mm, A28 GW26GA00654 Manufacturer: STEMA, Model: MT 750 BS3, 100 km/h... and much more. Loading height: 580 mm Errors and prior sale excepted. Bwsdpoyn Ugyofx Al Aeu

Condition: used, functionality: fully functional, machine/vehicle number: MT933, Year of construction: 2020, operating hours: 1,650 h, load capacity: 3,300 kg, lifting height: 9,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,300 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 7,640 kg, total length: 4,680 mm, drive type: Diesel, construction width: 2,330 mm, Rigid telehandler Chassis number: MT933 Load center: 600 Mast type: telescopic Transmission: torque converter Speed class: 20 Condition: ready for operation and fully functional Technical condition: good Front tire type: pneumatic Front tire size: Alliance 400/80 - 24 - 162A8 Front tire condition: 80 - 100% Rear tire type: pneumatic Rear tire size: Alliance 400/80 - 24 - 162A8 Rear tire condition: 80 - 100% Description: The MT 933 telehandler meets all requirements for material handling tasks on construction sites with medium-height buildings. Simplicity and productivity are the core concepts of this machine. The spacious cab provides excellent all-around visibility and features an ergonomically arranged control layout, ensuring all key operating elements are within easy reach for more effective maneuvering. The maximum outreach of 6.5 m allows for a large working area. The powerful MT 932 offers a lifting height of 9 m and a lifting capacity of 3.2 t. Thanks to the 3 steering modes, 4-wheel drive, and a turning radius of 3.72 m, it will prove a valuable asset on congested job sites. 3rd hydraulic circuit, Bedpfx Alez Alxno Aewu

Condition: excellent (used), mileage: 810,840 km, power: 552 kW (750.51 HP), first registration: 02/2020, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x6, wheelbase: 4,900 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 11,500 kg, loading space length: 8,640 mm, loading space width: 2,500 mm, loading space height: 2,800 mm, Year of construction: 2020, Equipment: AdBlue, central locking, electric window regulation, onboard computer, retarder, soot filter, tail-lift, = Additional options and equipment = - Aluminum fuel tank - Cab - Refrigerator - Air suspension - Particulate filter - Sun visor flap = Remarks = Volvo FH16.750 XL 8x4*4 - Carrier Supra 1150 MT - Bi Temp - Retarder - Tail lift - Bussbygg box body MY: 12-2-2020 Bsdoy Ryiyjpfx Al Aowu KM: 810,840 YV2R0P0G4LA857570 Box dimensions: 863 - 250 - 280 Carrier Supra 1150 U MT - Bi Temp Tail lift Retarder Full air suspension Rear steering axle = Further information = Technical information Number of cylinders: 6 Unladen weight: 15,745 kg Transmission Transmission: I-Shift, 12-speed, automatic Axle configuration Suspension: air suspension Front axle 1: Tire size: 385/65R22.5; Max. axle load: 9,000 kg; Steered; Left tire tread: 50%; Right tire tread: 50% Front axle 2: Tire size: 315/70R22.5; Twin tires; Max. axle load: 11,500 kg; Left inner tread: 50%; Left outer tread: 50%; Right inner tread: 50%; Right outer tread: 50% Rear axle 1: Tire size: 315/70R22.5; Twin tires; Max. axle load: 11,500 kg; Left inner tread: 50%; Left outer tread: 50%; Right inner tread: 50%; Right outer tread: 50% Rear axle 2: Tire size: 385/55R22.5; Max. axle load: 8,000 kg; Steered; Left tire tread: 50%; Right tire tread: 50% Functionality Tail lift: rear liftgate Body make: Carrier Supra 1150 U MT Condition Technical condition: good Visual condition: good

Condition: used, Year of construction: 1982, Technical details: grinding diameter: 350 mm grinding length: 1000 mm centre height: 225 mm grinding length: max. 1600 mm centre distance: 1540 mm spindle bore: 38 mm max. swivability: 90 ° weight of the machine ca.: 6,0 t dimension machine xH: 4,4 x 2,45 x 2,3 mm Bjdpfx Alow Rktzj Aewu Machine with CNC package and DFU connection Multi-range measuring head for interrupted surface Tailstock with cylinder error correction Final balance balancing device *

Condition: used, mileage: 24,261 km, power: 110 kW (149.56 HP), first registration: 09/2014, fuel type: diesel, empty load weight: 8,850 kg, maximum load weight: 9,150 kg, overall weight: 18,000 kg, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro3, suspension: other, number of seats: 2, total length: 9,300 mm, Year of construction: 2014, operating hours: 24,261 h, construction height: 2,900 mm, Equipment: ABS, The vehicle has 216,546 km on the odometer. The Mercedes-Benz KAMAG WBH 25 Wiesel transfer vehicle is a versatile model that has been in operation since its initial registration in September 2014. With an operating time of 24,261 hours, the vehicle is in used, but well-maintained condition. The vehicle is powered by a 4,249 cc diesel engine with an output of 110 kW (150 hp) and meets the Euro 3 emissions standard. This specific model is painted in a striking yellow metallic color and features an automatic transmission. It has two seats and is equipped with a yellow environmental badge of class 3. The KAMAG is 2,900 mm high, 2,550 mm wide, and 9,300 mm long, with a permissible total weight of 18,000 kg. Bedpfjwu Igbox Al Ajwu Viewings are possible from Monday to Friday and on Saturdays without prior registration. Optionally, a registration service and the possibility of delivery within Germany are offered for an additional charge. Sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: used, maximum load weight: 2,641 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 09/2025, Year of construction: 2025, Henra MT 353517 Machinery Transporter for construction equipment, etc. – new New, immediately available from stock. Permissible gross weight 3500kg. Transport area 3500 x 1700mm. Standard features include: * Bolted tubular drawbar with 2 different heights for overrun brake installation * Recessed lashing hooks in V-grooves in the loading area * Very low loading floor for easy driving on and off * 115 cm long loading ramp with sturdy drive-on aid and adjustable spring system * Loading ramp equipped with a robust and practical rotary latch (prevents tailgate rattling) * Heavy-duty bucket holder, also serves as a spare wheel bracket Bedpfez Hd Adox Al Aswu * Integrated LED side marker lights in side rail * LED front lights and LED contour lights * Sealed front section with tubular frame * Heavy-duty 18 mm plywood/wooden floor with anti-slip surface * Wheels 185/60R12 * Approved for 100 km/h * Despite the utmost care, errors in this listing cannot be excluded. We reserve the right of prior sale and to make changes!