Used Orient Case Bender for sale (2,962)

Condition: new, Year of construction: 2026, sheet width 3100 mm plate thickness 9 mm pre-bending 6 mm diameter of upper rolls 220 mm diameter of lower rolls 200 mm side roll diameter 170 mm min. dia. 250 mm roll speed 6 m/min total power requirement 10,3 kW weight of the machine ca. 4651 kg dimensions of the machine ca. 4915 x 1120 x 1235 mm Features - Machines include the following DAVI standard specification: The components of the machine structure (machine stand, frame and swivel bearings, etc.) have been calculated and designed to withstand the loads required for the applications and performance levels. The robust and heavy-duty machine construction absorbs the loads generated during the bending process without transferring them to the foundation. - High-quality surface finish: For forming delicate surfaces and/or soft materials without leaving marks Hydraulic-mechanical parallelism system, supported by electronics for fine-tuning. There are two INDEPENDENT & SYMMETRICAL hydraulic circuits for the left and right cylinders of each roller. The oil flow is regulated by two DOUBLE PUMPS, which are mounted on the Pjdpoz Dxpmefx Aazjgt same motor shaft and are fully synchronised. The two symmetrical hydraulic circuits move the cylinders and supply the rollers with the SAME amount of oil in a fully synchronised manner. Electronic control is activated only for extremely precise fine-tuning. - Smooth transmission of the drive Both the hydraulic motors and the gearboxes (top and bottom) can follow the deflection of the roll without load when bending narrow sheets. This ensures perfectly symmetrical deflection of the rolls under load. This system also allows the rollers to deflect freely, without the risk of breakage under excessive load. - ‘Roll-by-Wire’© digital technology Since 2004, DAVI has revolutionised the way sheet metal rollers are wired (similar to ‘fly-by-wire’ technology in the aerospace, FMS and automotive industries) and introduced ‘Roll-by-Wire’ technology. This allows the entire control system of the roller to be controlled via digital signals rather than, as was previously the case, via numerous relays and contacts. Digital technology is much faster and more reliable. Action Benefit Reduction in the number -> Reduction in potential of components component failures Very compact design -> Improved accessibility for maintenance work Improved accessibility for -> Damaged parts can be identified maintenance work more easily More reliable -> Greater accuracy thanks to the use of ‘digital signals’ Permanent lubrication technology The lever-arm feed system eliminates all linear friction during the movement of the side rollers, as the roller support arms, which house the bushings, rotate simply and smoothly around two large, strong pivot points made of alloy steel, ensuring precise and friction-free rotation. This guarantees reduced wear and safety during unlimited use. Further advantages of the lubrication-free lever-arm feed mechanism are: •NO daily maintenance required (lower operating costs). •More production time available. •The bearings are sealed to protect against scale, dust and rust - Hardened rollers •Excellent heat tre...

Year of construction: 2022, operating hours: 1,529 h, condition: ready for operation (used), Optical measurement machine manufactured in 2022. This ZEISS ATOS Q 12M features dual 12-megapixel CMOS cameras with a resolution of 4112 x 3008 pixels. It includes multiple measurement volumes, with the largest measuring 500 x 370 x 320 mm. The system operates efficiently with a maximum rotary table load capacity of 150 kg. If you are looking to get high-quality optical measurement capabilities, consider the ZEISS ATOS Q 12M machine we have for sale. Contact us for further details. - Camera Resolution: 2 x 12-Megapixel CMOS Cameras (4112 x 3008 pixels)- Operating/Worktime Hours: 1,529 h (Overall work time / Overhaul work time)- Measurement Volumes (MV) & Specifications:* MV50: 50 x 35 x 20 mm; Point Spacing (12M): 0.012 mm; Measuring Distance: 490 mm; Camera Lens Focal Length: 90 mm; Projector Lens Focal Length: 60 mm; Ref Points: Ø 0.4 mm; Calib Object: CP40/MV60* MV100: 100 x 70 x 60 mm; Point Spacing (12M): 0.029 mm; Measuring Distance: 490 mm; Camera Lens Focal Length: 50 mm; Projector Lens Focal Length: 27 mm; Ref Points: Ø 0.8 mm; Calib Object: CP40/MV100* MV170: 170 x 130 x 130 mm; Point Spacing (12M): 0.044 mm; Measuring Distance: 490 mm; Camera Lens Focal Length: 35 mm; Projector Lens Focal Length: 20 mm; Ref Points: Ø 0.8 mm; Calib Object: CP40/MV170* MV270: 270 x 200 x 200 mm; Point Spacing (12M): 0.064 mm; Measuring Distance: 490 mm; Camera Lens Focal Length: 25 mm; Projector Lens Focal Length: 14 mm; Ref Points: Ø 1.5 mm; Calib Object: CP40/MV320* MV350: 350 x 260 x 260 mm; Point Spacing (12M): 0.091 mm; Measuring Distance: 490 mm; Camera Lens Focal Length: 16 mm; Projector Lens Focal Length: 10 mm; Ref Points: Ø 1.5 mm; Calib Object: CP40/MV320* MV500: 500 x 370 x 320 mm; Point Spacing (12M): 0.124 mm; Measuring Distance: 490 mm; Camera Lens Focal Length: 12 mm; Projector Lens Focal Length: 6 mm; Ref Points: Ø 3.0 mm; Calib Object: CP40/MV560- Actual System Operating Temperatures (Status Screen):* temp0 Monoboard: 44.0 °C* temp1 Timber: 25.5 °C* temp2 Air: 21.7 °C* temp3 LED: 36.0 °C* temp4 Frame-P: 27.8 °C* temp5 DMD-P: 29.4 °C* temp6 Lens: 29.7 °C- Fan Speeds: Electronic Fan: 4237 RPM; Lamp Fan: 4359 RPM- System Orientation: Pitch: 14.9°; Roll: -3.7°- Rotary Table Load Capacity: Max. 150 kg (or max. 40 kg depending on setup configuration)- Tilt and Swivel Unit Load Capacity: Max. 5 kg- Mobile Workstation Laptop Spec (Dell Precision 7760): 17" Display, 64-bit Intel 2.6 GHz Octa-Core CPU, 64 GB RAM, NVIDIA Quadro OpenGL Graphics, 1 TB SSD, I/O: Wi-Fi, LAN, 3x USB 3.2 / Thunderbolt 4- Included Accessories & Equipment: Tripod, 4 measurement fields (MV50, MV100, MV270, MV500) with calibration plates, Rotary/pan unit with lift, Rotary table with 19" control unit, Mobile controller, Converter box with image processing card (fiber optic to Thunderbolt 3), Carrying case, Power supply, Dongle-based software license Pgedpfxjz D Etrj Aazjt

Condition: used, Year of construction: 2023, operating hours: 100 h, machine/vehicle number: R91, Used SRAML RBB-LT300 bag in box filler machine - Year 2023Technical Specifications & Performance DataThe Sraml RBB-LT300 is a compact, single-head Bag-in-Box filling machine engineered for reliable hot-fill applications in beverage production. Designed for industrial packaging environments, this unit supports a wide range of bag sizes and delivers consistent, hygienic fills that meet modern quality expectations. As part of a used bottling line or as a standalone filler, it offers dependable throughput and straightforward integration with downstream packaging machinery.Manufacturer: SramlModel: RBB-LT300Year: 2023Production speed: Up to 260 bags/hour (at 5.0L)Formats: Compatible with 3.0L to 20.0L Bag-in-BoxFilling heads: 1Neck/fitment: VitopPower: 1.5 kWVoltage/Frequency: 400 V / 50 HzDimensions (L x W x H): 930 mm x 1170 mm x 2090 mmWeight: 120 kgAdvanced Automation & Control SystemsThe RBB-LT300 is built for efficient, repeatable operations with simplified operator controls and process reliability. It includes an integrated buffer tank to stabilize product flow and a CIP attachment point to connect with plant cleaning systems, supporting hygienic operation and reduced changeover downtime. Quick mechanical adjustments enable efficient format transitions across supported bag sizes without complex tools.Integrated buffer tank for stable product feedingCIP attachment for streamlined cleaning integrationHot-fill oriented design suitable for juice applicationsOperator-friendly controls for setup and run modesConsistent dosing accuracy with a single filling headProduction Line Integration CapabilitiesThis Bag-in-Box filler can operate as a standalone station or be integrated into a complete second hand or new industrial packaging line. It pairs naturally with case/box handling, carton erecting, packing, and palletizing solutions. The machine’s footprint and utilities make it straightforward to position upstream of sealing and boxing stations in beverage production environments.Standalone or inline operationCompatible with Bag-in-Box downstream equipmentFlexible format range from 3.0L to 20.0LIdeal for integration in used bottling line upgradesMachine Condition & Maintenance HistoryManufactured in 2023 and showing under 100 operating hours, this unit presents as a late-model, low-use filler. It is functional and ready for operation, offering a near-new alternative for producers seeking dependable performance without the lead times of new equipment.Low-use machine with under 100 hoursFunctional and ready for operationRecent manufacturing year supports long service lifeOperational Performance & VersatilityOptimized for hot-fill beverage production, the RBB-LT300 handles Bag-in-Box applications for products such as apple juice and similar liquids... Pedpfx Aaezrgrnozjgt

Condition: used, Year of construction: 2020, machine/vehicle number: MBI19, Used APSOL casepacking monoblock - year 2020Technical Specifications & Performance DataThe Apsol Automatic Case Packer from 2020 is engineered for reliable secondary packaging in industrial environments. Its robust construction and CE-compliant design ensure consistent performance with low downtime, making it an excellent choice for upgrading a used bottling line or enhancing a second hand industrial packaging setup. Each format has its own pick-up head, specific to the product. For the formats used the configuration was: 6x2.Manufacturer: ApsolYear: 2020Production speed: 7–9 boxes per minuteElectrical rating: 400 V AC, 50 Hz, three-phase (3ph+N+GND)Installed power: 26.5 kWFull load current: 49 AShort-circuit rating: 10 kAProtection class: IP54Compliance: CEAdvanced Automation & Control SystemsDesigned for dependable automation, this case packer supports stable, repeatable operations in demanding packaging environments. Electrical architecture provides balanced power distribution and protection to safeguard motors and drives. Operator access and safety interlocks help maintain productivity while ensuring safety.Three-phase electrical supply for industrial dutyCE-compliant design with integrated electrical protectionsIP54 enclosure rating for dust and splash protectionClear operator interfaces for straightforward setup and monitoringProduction Line Integration CapabilitiesThis machine integrates efficiently into beverage production and broader packaging machinery lines. It is suitable for inline installation downstream of fillers, labelers, and inspection systems, handling the transition from primary to secondary packaging with steady throughput. Its configuration supports synchronization with upstream conveyors and downstream case sealing or palletizing equipment.Seamless integration into bottling equipment and packaging machineryCompatible with upstream filling, labeling, and inspection modulesPairs effectively with case sealers, wrap-around packers, and palletizersAppropriate for upgrading a used bottling line or expanding an industrial packaging lineMachine Condition & Maintenance HistoryThe 2020 build and verified electrical data indicate a modern platform suitable for immediate deployment. Offered as a second hand industrial packaging solution, it is presented in ready-for-operation condition to minimize commissioning time and accelerate line ramp-up.Operational Performance & VersatilityWith a capacity of 7–9 boxes per minute, this Apsol case packer delivers a balanced mix of speed and reliability ideal for small to medium throughput applications. The design focuses on stable case handling and consistent packing geometry, supporting quality-focused beverage production and general industrial packaging requirements.Consistent case handling for stable pack formationThroughput suitable for medium-speed production linesEngineere... Pgedpfx Aaoy Uvhaozjt

Condition: excellent (used), Year of construction: 2025, operating hours: 230 h, functionality: fully functional, Rotary die-cutting machine for cardboard packaging, size 2500x1600, using dies. The machine is additionally equipped with a stacker, a vibratory feeder, and a stacking system. Pgedpfxszi Apqj Aazot

Condition: used, Year of construction: 2006, Overview This KHS Innopack SP, built in 2006, is a pick-and-place case packer for bottles. Empty cases run on the case conveyor into the packing zone, where they are stopped and centred; the gripper head picks the bottle formation from the four-lane infeed table and sets it into the cases. The lifting unit travels on a vertical lifting column with counterweight, and the motion is controlled by a KUKA KR C2 controller with KCP teach pendant. Four change-part trolleys with gripper heads for different bottle sizes are included. The packer is still installed in a wine bottling and packaging line and can be inspected on site. Technical data - Manufacturer: KHS - Model: Innopack SP - Year of manufacture: 2006 - Machine type: pick-and-place case packer - Bottle infeed: 4 lanes, lane width 85 mm - Gripper head: 2 x 18 bottle tulips, formation 3 x 6 bottles - Case clearance: 175 x 400 mm - Power supply packer: 400 V, 3 Ph, 50 Hz, 27 A - Robot controller: KUKA KR C2, 400 V, 3 Ph, 50/60 Hz, 8 A - Overall dimensions (L x W x H): 6,000 x 3,250 x 3,650 mm - Change-part trolleys: 4 units, each 2,050 x 1,300 x 2,100 mm Equipment - Base frame with lifting column, counterweight and lifting unit Pgsdpfxsz Hbxio Aazot - Cross conveyor and shifting carriage for the gripper head - Gripper head with pneumatic bottle tulips - Centring device for the cases in the packing zone - Four-lane bottle infeed table with lane guides - Case infeed and outfeed conveyors - Enclosure with windowed doors and safety fencing - KUKA KR C2 controller cabinet and KCP teach pendant on stand - KHS control cabinet - 4 change-part trolleys with gripper heads for different bottle sizes - Operating manual (Dutch) available Condition Still installed. An inspection on site is possible. Availability Available immediately. Location: Belgium.

Condition: ready for operation (used), Year of construction: 2021, A stationary Brabender residual moisture and moisture content measuring device is offered. Relative measuring range: 0.0001%H₂O-15%H₂O, absolute measuring range: 0.01mgH₂O-15mgH₂O, moisture content resolution: 0.01mg, resolution: 1ppm, relative resolution: 0.0001%H₂O, measuring temperature range: 30°C-160°C, temperature setting: in 1°C increments, sample weight: approx. 0.05g-20g, max. sample volume: approx. 50cm³, accuracy: better than approx. 0.6mg, ambient temperature: +10°C to +45°C, relative humidity: 5%-95%, storage temperature: -20°C to +55°C, relative humidity: 5%-95%, measuring distance: approx. 1m, measuring height: approx. 1.6m. Dimensions X/Y/Z: 562mm/420mm/275mm, weight: 27.6kg. Documentation available. Inspection possible by appointment. Pjdpfx Aezli Uroazogt

Condition: used, functionality: unexamined, Year of construction: 1978, control type: manual, degree of automation: manual, actuation type: electric, number of rollers: 3, shaft diameter: 400 mm, roller diameter: 622 mm, rotational speed (min.): 2 rpm, rotational speed (max.): 4 rpm, rotational speed (distance/time): 4,900 mm/min, pipe diameter (max.): 254 mm, tube wall thickness (max.): 10 mm, overall weight: 22,000 kg, total length: 3,900 mm, total width: 2,600 mm, total height: 3,300 mm, Equipment: emergency stop, BOLDRINI BSA 40 – Heavy-duty profile bending machine / roll for profiles For sale: a heavy-duty industrial profile bending machine, model BOLDRINI BSA 40, manufactured by BOLDRINI S.p.A., Italy. The machine is designed for bending and rolling metal profiles, tubes, angle profiles, rails, flanges, T-profiles, double T-profiles, and other structural elements with a large radius. It is suitable for the production of metal structures, halls, shipbuilding, tubular structures, tanks, flanges, and heavy industrial fabrication. Key data: Manufacturer: BOLDRINI S.p.A. Model: BSA 40 Year of manufacture: 1978 Serial number: 5936 Machine type: profile bending machine / angle bending roll / section bending machine Pedozilzvepfx Aazogt Working system: 3 rollers Control: manual / electromechanical Drive: electric Weight: approximately 22,000 kg Condition: used, stored outside of a production line Available tools: set of rollers, dies, segments, and additional attachments, as shown in the pictures Approximate capacity according to model BSA 40: Angle profile: up to approximately 203 x 203 x 25 mm Tubes: up to approximately Ø254 mm Suitable for: tubes, L-profiles, T-profiles, double T-profiles, rails, flanges, and profiles with a large radius Equipment and features: The machine has a robust, heavy-duty construction, large working rollers, and mechanical adjustment via screw spindles. Working rollers, profile dies, additional segments, and attachments for various types of profiles are available. The electrical panel is present and includes contactors, relays, fuses, a transformer, terminal blocks, and controls. The machine has not been tested under load at the moment. Visible surface corrosion is present on some of the rollers, tools, and housing due to outdoor storage. An on-site inspection and electrical/mechanical check are recommended before commissioning.

Condition: new, Year of construction: 2026, neu 2026 Pjdpfx Ajwiqm Tjazjgt 090180 prompt, Zwischenverkauf v Türkei 8300 € 160.19 € 1 50 mm 152 mm 162 mm 3 1.1 kW 4,5 m/min 60x10 mm / 600 mm; 20x10 100x15 mm / 600 mm; 50 x 35x35 mm / 600 mm; 15x15 35 mm / 600 mm; Dm. 20 mm 70x2 mm / 1200 mm; Dm. 25 70x30x3 mm / 1500 mm; 30x 50x50x3 mm / 1600 mm; 20x 50x50x6 mm / 600 mm; 30x3 50x50x6 mm / 900 mm; 30x3 810 mm 950 mm 1500 mm 500 kg 3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!

Condition: new, Year of construction: 2025, Case Maker with Robotic Hand – High Efficiency Book Cover Machine We are offering a high-quality case making machine designed for the production of book covers, notebooks, and similar hardcover products. Equipped with a robotic hand, this machine ensures precision, consistency, and efficient handling during the production process. It is suitable for working with a wide range of materials, including gray board, MDF, wooden boards, mirror board, as well as various cover materials such as art paper, specialty metallic papers (gold/silver), fabric, and velvet. Ideal for print shops, binderies, and packaging manufacturers looking to improve productivity and product quality. Working speed: 15-28 pcs/min Max hardcover size: 460x300mm Min Hardcover size: 55x60mm Case Thickness range: 1-12mm Cover Thickness range: 100 -250 g/m2 Case materials range: Gray board, wooden board. mdf, mirror board Pgedpfx Asy Dqx Soazst Cover materials range: Art paper, Silver/gold paper, Fabric, Velvet Machine dimension: 1150x1500x1700mm Machine weight: 650kg

Condition: like new (used), functionality: fully functional, Used Brabender twin-screw feeder type DDW-H21-M-DDS20-50R • Year of manufacture: 1993 • Throughput range: 5 – 50 kg/h • Integrated agitator / paddle system in the hopper (as shown in the photos) Pedpfoyfm Spjx Aazjgt • Stainless steel hopper • Twin-screw design The feeder is in good condition, complete, and ready for immediate use. Ideal for powders, granulates, and poorly flowing bulk materials.

Condition: repair required (used), functionality: limited functionality, type of input current: AC, total width: 905 mm, total length: 2,160 mm, total height: 2,500 mm, throat depth: 1,200 mm, For sale: Caser pillar drilling machine including extensive accessories: Scope of delivery: - Clamping block - Cross table - Vice Condition / Function: - The machine is basically functional - Defect: The arm clamping no longer works - Likely cause is an issue with the hydraulic valve - All other functions work as intended Notes: - Sold as seen Pgsdpfxeyhmkks Aazet - Ideal for hobbyists, repair or for spare parts No warranty or returns Price: negotiable Collection preferred, shipping by arrangement

Condition: like new (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, machine/vehicle number: ST-32-004, year of last overhaul: 2025, Viper TL, an advanced automatic packaging system designed to streamline product sorting and loading into Tray & Lid and Wraparound boxes. It is especially suitable for cans, pouches and sliced meat or cheese. This exact VIPER TL is AS NEW, only exhibited few times on international trade shows as DEMO machine. Details about the machine: VIPER TL, capacity 6–10 boxes per minute The types of boxes it can produce: Large tray & lid: LWH 398×354×178 or 143 mm Pgjdpfox Ttywjx Aazet Small tray & lid: LWH 398×266×178 or 143 mm Lidl wraparound box: LWH 398×354×143 mm The first two are tray & lid (separate box and lid on the outside), and the third is a classic wraparound box that can have perforation for display purposes.

Condition: new, Year of construction: 2020, Electric elbow making machine is the mechanism for forming elbow from round and rectangular pipes with different diameters. Elbow making machine EEM-200plus is the better version of EEM-200 machine. It has additional fourth bottom pressing tool so it presses pipes from all four sides while bending and provides better quality of elbow. You can use our machine for working with round pipes as with rectangular pipes. Elbow making machine EEM-200plus lets you to work with pipes from 80 to 200mm. Pay attention: Inside diameter of the pipe you use for bending has to be 1mm bigger than bending matrix of the machine!! The lock of the pipe has to be closed or welded to avoid opening of pipe while bending!! Elbow making machine EEM-200 is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour for this elbow machine. The needed voltage is 380V. It could be used in environment with temperature from -5 to +45 Celsius degrees. Elbow making machine is good for bending pipes with maximum thickness 0.8mm. Elbow making machine EEM-200plus bends elbows thank to special pressing tools. There is one set of tools for bending one diameter of pipe you need. So to bend more diameters of pipes you have to get additional pressing tools. Pgjdpfxsf Epzno Aazjt It goes four pressing set tools with the machine so you can bend four diameters of pipes with it in the range from 80 to 200mm (that you choose by your own)

Condition: new, Year of construction: 2025, Manual pan & box brake SM 1270x2 mm is a machine for bending different elements from the metal sheets with maximum length 1270 mm and maximum metal thickness 2mm. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But manual pan & box brake SM 1270 thanks to special segmented bars can bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisted of parts with different lengths. So you can adjust it to the length you need to bend boxes and cassettes from all four sides. There are models of manual pan & box brakes we produce: Manual pan & box brake SM-1270 x 2mm Pedpfx Aaof Eywwjzjgt Manual pan & box brake SM-1550 x 1.8mm Manual pan & box brake SM -2020 x 1.2mm Those manual box & pan brake in standard set have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle up to 135 degrees. The standard set of manual pan & box brake SM includes: - Manual box & pan folder - Angle measuring device - Four position angle limiter - Two segments with side cuts to bend cassettes with inside bends. As an additional option you can get: -Third segmented bar -Segments tempering option (in standard set pan & box brake’s segments go not tempered, but if you work with metal thickness more than 1mm we advise to temper one- so rigidity of segments will be higher and usage time of machine longer); - Change of upper segments height (from 30 to 45mm). So it lets to bend cassettes with height up to 45mm instead of 30mm. - Cross cutting knife. Designed for cutting metal sheets before bending them with folding machine. The maximum metal thickness for cutting is 0.8mm; - Multifunctional acceptance table to adjust different length limiters in different parts of bending machine. So it lets to save your time while same sizes cassettes or elements production. Dimension: 160.00Sm x 82.00Sm x 120.00Sm Weight: 350.00Kg

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 38 mm, bending angle (max.): 190 °, bending radius (max.): 220 mm, total length: 2,500 mm, power: 14 kW (19.03 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Servo - Hydraulic, pressure: 150 bar, wall thickness: 2 mm, working length: 2,500 mm, Equipment: documentation/manual, 38x2mm Twin Head Tube Bending Machine The “Gemini” tube bending machines structures. This type of tube benders bend the tubes with own two bending heads. Gemini has 3 different type which are B, BF, BFR. Ø38mmx2mm Podjvx D Dxepfx Aazsgt BFR series makes bending, rotating and feeding operation automatically.

Condition: new, Year of construction: 2025, Outstanding workmanship and practical detailed solutions convince with this bending machine, the bending performance is sufficiently dimensioned with 0.65 mm sheet steel for most applications. The expansive legs of the folding machine give this machine a very safe working position and also prevent it from "tipping over" quickly during transport. Pgodocv S Eiopfx Aazet Maximum working width of the press brake: 4140 mm Bending capacity: up to 0.6 mm (steel sheet) Bending machine bending angle: 145 degrees Bending beam thickness: 20 mm Cut with the roller shears over the entire working width Lifting of the upper beam in three positions Passage opening: 80 mm degree scale angle stop depth stops Weight of the folding bench: approx. 650 kg Shipping from Poland. Please ask! 12 MONTHS WARRANTY! Delivery: every week Roller scissors 0.8mm - plus 350 euros Manual folding machine plus 75 euros We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: new, Year of construction: 2026, "Prod-Masz" your partner when it comes to bending. Our name stands for innovative products of the highest quality and reliability. Our bending machines impress with their particular flexibility, performance and versatility. Folding beam only 15mm RED 3200 / 0.8mm Technical specifications: the maximum working length: 3200 mm Bending capacity: 0.8 mm (steel) 1.2 mm (aluminum, copper, zinc) Folding beam thickness: 15 mm Bending angle: max. 150 degrees Upper cheek opening: 80 mm Weight: approx. 600 kg The price also includes the front depth stops and the rear frame. Bending from 3 sides -> cutouts to the side 60mm / 45 ° recess Price: 5100.00 EUR rotary shears + 350 Euro Delivery date: every week Pedpfjcv S H Asx Aazegt We are looking forward to your contact! The invoices are issued either with 0% of VAT as intra-Community delivery.

Condition: new, Year of construction: 2025, The Concept Easy is the ideal assembly support for dowel construction at the case goods production as well as at drawer production. Short introduction: • Small footprint requirement, less than 1,8 m2 • Potentiometer for stepless adjustable pressing force • Pressing force min. 300 daN (kg) • Pressing force max. 2200 daN (kg) • 3 Pressing velocities and adjustment rates Pgodpodx Daajfx Aazst 5 /10 / 25 mm/sec. (with fine positioning / creep feed) • Adjustable clamping cycle time with automatic opening

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Oriental Motor, Vexta Stepping Motor stepper motor -Type C7219-9012K Pedpfxjq Dr Scj Aazjgt -Shaft: Ø 5 x 18 mm -Dimension: 67/42/H42 mm -Weight: 0.3 kg

Condition: as good as new (ex-display), Year of construction: 2024, Tube Bender BB 48 without mandrel - model BB 48 - capacity up to 48 x 3,0 mm (mild steel) round tube mild steel - digital readout - bending angle programable - with foot pedal - bending speed 2,2 rpm - motor 1,5 KW 400 volt 50 hz 3 ph. - all shafts and necessary parts are heat treated and grinded - monoblock body CK 45 Pgodpfxofp Al Uo Aazst - weight ca. 200 kg

Condition: new, Year of construction: 2025, Sheet metal folder directly from polish manufacturer Prod-Masz. Plate Bending Machine ZGR-3000,8 Technical data: - Maximum working width: 3140 mm - Sheet gauge up to: 0,8 mm (Steel) - Titan-Zinc-Plate 0,8 mm, Aluminium Plate 1,2 mm Cooper plate 1,2 mm - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 24 mm - Protractor - Weight: 400 kg - Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty. Podpfx Aaecl Ixqozjgt Price: 2050 Euro Shipping costs: its dependent on destination point ONLY SHIPPING IS POSSIBLE We provide invoices with 0% of tax. Payment in cash or by bank transfer in advance.

Condition: new, Year of construction: 2025, Bending machine from the only, genuine and reliable manufacturer PROD MASZ® Manufacturing modern press brakes is our passion, which we would like to share with you. At the trade fairs we share our experience and attention to our bending machines, thanks to which we can keep improving our bending machines, without forgetting who we really work for. The quality of our press brakes is very important to us. Pgjdpfocttgfox Aazjt Directly from the manufacturer Prod-Masz! New, complete machine from current production. Technical specifications: maximum working width: 3140 mm Bending capacity: up to 0.8 mm (steel sheet) Bending angle: max 145 degrees Bending beam thickness: 24 mm Weight: approx. 400 kg Roller shears (max. cutting capacity up to 0.8 mm / sheet steel) The machine complies with CE guidelines and has a 12-month guarantee. Rotary shears 0.8mm - plus 350 euros welt press/ crusher plus 75 euros Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery.

Condition: good (used), functionality: fully functional, Twin screw extruder / laboratory extruder - 2 x 30mm screw diameter - 4x heating zones - dosing - Control system Pgedpfou Hik Djx Aazst

Condition: repair required (used), bore capacity in steel diameter / mm arm length 1000 mm workpiece height max / mm - throat (max) 1000 mm - sleeve stroke 250 mm MILLING SPINDLE / HEAD / - spindle revolutions (min) 47.5 /min - spindle revolutions (max) 2120 /min - spindle diameter 60 mm - space requirements -left/right- 2000 mm - space requirements -front/back- 750 mm - total height 2160 mm Pgsdpfxsvmtlho Aazet - total weight approx. 2500 kg Machine is not 100% OK, and needs an overhaul. - Height adjustment and cross adjustment must be repaired