Used Oscillator for sale (595)

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 4/3509, power: 2.2 kW (2.99 HP), Model: LZK 3/4. Machine No.: 4/3509. Belt dimensions: 150 x 2600 mm. Feed unit: Masterwood type MEC 8V. Main motor: 2.2 kW. Oscillation motor: 0.18 kW. Dusdpfx Apsy Nz H Dowst

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: VO995, total length: 1,700 mm, total width: 1,000 mm, total height: 1,150 mm, table length: 880 mm, table width: 370 mm, overall weight: 260 kg, power: 2.2 kW (2.99 HP), grinding width: 150 mm, grinding length: 2,580 mm, Machine type: LVO 120, Machine number: VO995, Year of manufacture: 2009, Main motor: 2.2 kW, Oscillating motor: 0.11 kW Duodpfx Aey Nznuepwst

Condition: used, Year of construction: 2025, operating hours: 122 h, Operating hours: 122, First registration: 08.10.2025 Maximum lifting capacity: 3,000 kg Maximum lifting height: 6,700 mm Maximum outreach: 3,800 mm Length to attachment carrier: 4,510 mm Width: 2,000 mm Height: 2,120 mm Total weight with forks: 6,620 kg Total weight without forks: 6,450 kg Engine: 4-cylinder Deutz TCD 2.9 2.9 L displacement, water-cooled Power: 75 kW (101 hp) 2,600 rpm Stage V Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive Pump: electronically controlled with variable output Motor: variable displacement motor EPD PLUS including optional automatic rpm increase Mineral hydraulic oil HVI 46 Transmission: 2-speed Electrohydraulic control Vmax = 1st / 2nd gear = 16/20 km/h, optional 40 km/h Cab: Fully enclosed cabin, split door 360-degree all-round visibility GRAMMER air-suspended seat with safety lap belt ROPS/FOPS certified Heating Front, roof, and rear wipers Sunblind 4x1 joystick, electronic with capacitive release and travel direction switch Telescopic boom: 2-section with electronic end position cushioning (Soft Stop) Attachment carrier: Quick-change system type “ZM2” hydraulically controlled from the cab Steering: Hydraulic steering 3 steering modes: four-wheel, front-wheel, crab steering Drive: Permanent all-wheel drive Axles: Front axle rigid Rear axle oscillating Braking system: Servo-assisted disc brakes on all four wheels Automatic parking brake when engine is off Hydraulic system: Load-sensing pump with variable output Total flow: 100 l/min Working pressure: 250 bar Flow-sharing control block Electrics: 12V battery with 100 Ah Dujdpfx Apoyv S Ufewjt Alternator 120A Stabilization control: Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, attachment recognition and overload cut-off Tyres: 400/70-20, agricultural tread Standard equipment: Power brake Hydraulic oil cooler Rear plate for mounting a trailer hitch Radio preparation Work lights on cabin (2 front, 2 rear) V2001 preparation for additional function at boom head 2 hydraulic connections at boom head Load guard on attachment carrier Road lighting Automatic battery disconnect switch Electrical connection cable inside boom Audible reverse warning Lift cylinder support for safety 1 Operating manual 1 Engine manual Special equipment: EU approval as tractor/towing vehicle 40 km/h incl. height-adjustable, self-locking trailer hitch, 30/32 mm pins, trailer lighting connection Air conditioning LED work lights on cabin (2 front, 2 rear) Boom suspension (B.S.S.) Location: 54595 Prüm

Year of construction: 1996, condition: used, machine/vehicle number: A9611003/0100, Technical data: - Manufacturer: Venjakob - Type: VBS 1300 - Working width: 1.300mm - Year of construction: 1996 - Operating side: left - Electric height adjustment of the sanding rollers - Constant table height, working height 920+-20mm - Manufacturer of brush sanding heads: Flex Trimm - Number of brush sanding heads: 2 pieces - Diameter of the sanding heads: 280/390mm - Sanding centre length 55mm - Roller1, grit 240, roller2, grit 280 - Speed of the brush sanding heads: 100-1000 rpm Duodpsyyyhuefx Apwet - Angled brushes - With brush oscillation - With vacuum belt - Feed speed: 1.5 - 7.5m/min. - Motor power 4KW - Machinelength: 3.500mm - Very sturdily built machine - Colour: light grey RAL 7035 - Total connected load 16KW - weight: 2740 kg

Condition: excellent (used), Year of construction: 1999, Manufacturer: WEGOMA Model: KS 2400 Category: Edge sanding machine Year of manufacture: 1999 Table width: 300 mm Table length: 730 mm Total units: 1 Max. sanding belt width: 150 mm Sanding belt length: 2,400 mm Main motor: 1.85 kW Sanding sleeve Round sanding support Oscillation Height adjustment: Table, manual Sanding belt tiltable: Yes Djdpfx Apjyza Ahewjut Required length: 1.7 m Required width: 0.8 m Required height: 1.5 m Location: ex-stock 54634 Bitburg - immediately available - Subject to prior sale

Year of construction: 2012, condition: excellent (used), Used compact / small foot print Amada Lasmac LC – 1212 a IV NT flat bed 2d cnc laser cutting machine for sale: Fully serviced single bed very clean Amada LC – 1212 a IV NT cnc laser – Video at the bottom of this listing Specification: Most recent work carried out by Amada UK: New turbo blower recently fitted New lenses and mirrors in August 2022 Fully serviced with Amada Uk Year / New 2012 Power: 2.5kw Machine Model: LC – 1212 a IV NT Travel method: X-Axis Material Travel, Y Axis: laser Beam Travel Axis Travel Distance X x Y x Z M: 1270 x 1270 x 300 Positioning Speed X x Y x Z m/min: 80 x 80 x 60 Cutting feed rare X x Y m/min: 0 – 20 Control Method: X-, Y- and Z-axes (simultaneously controlled) + B – axis Max. sheet size X x Y x Zmm: 2540 x 1270 x 300 Repeatable positioning accuracy mm: +0.005 Oscillator model: AF2000E-LU2.5 AF4000E Oscillation Process: fast axial flow, high frequency discharge excitation Ideal if you are looking to bring laser cutting in house and space is a premium Duodpjimwcbefx Apwjt Delivery and installation can be arranged AMADA LASMAC LC1212 MK IV 2.5 KW NT LASER CUTTING MACHINE MACHINE CAPACITY 1270 X 1270 2540 WITH ONE REPOSITION

Condition: used, Year of construction: 2007, functionality: fully functional, grinding width: 950 mm, grinding height: 170 mm, height adjustment type: electric, type of input current: three-phase, - Italian manufacture - year of manufacture: 2007 - combination sanding shoe TECHNICAL SPECIFICATIONS: - sanding width: 950 mm - sanding height: 4–170 mm - motor power: 11 kW - 1st unit: steel drum with pneumatic engagement - drum diameter: 110 mm - 2nd unit: combination sanding shoe - pneumatic engagement for rubber drum: 78 Shore - shoe with pneumatic adjustment - pneumatic oscillation - air blast for belts - electric height adjustment - two belt speeds: 8.3 m/s and 16 m/s - electronic sanding height positioning Duodpfx Apsxdxfqswst - continuously variable feed speed: 4–20 m/min - minimum material length: 500 mm - extraction nozzle diameter: 2 x 140 mm - machine dimensions (L/W/H): 150 x 180 x 210 cm - weight: ~ 1010 kg

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, WEBER KSF-3-1350 (CMC) Fine/Cross Sanding Machine with 3 sanding belts for premium fine, veneer, and high-gloss sanding. Featuring a constant working height and configured as follows: Machine Frame Heavy-duty welded steel construction designed to accommodate 3 sanding units and workpiece cleaning components, such as workpiece air cleaning. Electrical control cabinet integrated into the frame. - Constant infeed height of 900 mm - Control and sanding belt change side is left in feed direction - Heavy-duty height adjustment via spindle lift gearing - High-quality transport table with conveyor belt - Stepless feed speed from 3–18 m/min, frequency controlled - Vacuum conveyor version with one vacuum blower, 5.5 kW, with a vacuum channel extending up to the machine’s upper edge - Safety systems compliant with CE standards - Electrical equipment conforms to VDE Duodpfx Apoy A D Eiewjt - Doors on both sides of the machine; on the belt change side with safety interlocks and sight window for monitoring belt oscillation - With one infeed and outfeed table with rubber-coated rollers Unit 1: Sanding units engineered for double-shift operation. - Belt run-off switches connected to oscillation monitoring on wide belts - Automatic sanding belt length compensation - Non-contact optical belt detection, self-cleaning, on belt change side - Oscillation adjustment on belt change side - Wear-free DC braking - Extraction hoods with optimal airflow to maintain TRK levels Unit 1: Cross-sanding unit with - Pressure lamella belt with felt and graphite for extended service life - ISD segmented pressure beam system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blow-off unit Unit 2: CBF Combi Unit with - Grooved rubber contact roller, Ø 130 mm, rubber hardness 60 Shore - Cross-running lamella belt with separate 4.0 kW drive - ISA segmented pressure beam system with 11 mm workpiece detection and 22 mm pressure pad width (counter-rotation) - Workpiece-controlled oscillating sanding belt blow-off unit Unit 3: Cross-sanding unit with - Pressure lamella belt with felt and graphite for extended service life - ISD segmented pressure beam system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blow-off unit Control Control terminal: 'SIEMENS' MP 377 12" multi-panel - Graphical operator guidance via 12" color display - Program memory for 300 programs - Parameter setting via program - WANDRES Micro-Cleaning (single-brush version) Power sword brush with integrated micro-moistening of the linear brush (for optimal lacquer dust removal) Technical Specifications: Working width: 1350 mm Drive unit 1 (frequency controlled, Eco-Drive): 15 kW Drive unit 2 (frequency controlled, Eco-Drive): 20 kW Drive unit 3 (frequency controlled, Eco-Drive): 15 kW CBF drive: 3 kW Vacuum blower: 5.5 kW Feed drive (frequency controlled): 3.0 kW Height adjustment (frequency controlled): 3 kW Sanding belt speeds (frequency controlled): approx. 3–20 m/s Cross-belt dimensions (W x L): 2x150x5100 mm Wide belt dimension (W x L): 1370 x 2620 mm Workpiece thickness (min./max.): 4–140 mm

Condition: used, Year of construction: 2017, functionality: fully functional, We are offering this used HEESEMANN UKP 20 edge sanding machine, year of manufacture 2017. Manufacturer: HEESEMANN Model: UKP 20 Year: 2017 Condition: used If you have any further questions or require more information, please do not hesitate to send us a message or give us a call. If needed, the order confirmation with all technical details can be sent. 1 workpiece transport system – total length 5,015 mm – driven by a 1.5 kW three-phase motor, with double chain for workpiece transport Feed speed adjustable from 5 to 25 m/min, frequency-controlled, working height constant at 880 mm, including integrated control cabinets; Including adjustable stop ruler with digital readout and including counter fence with central width adjustment with central height-adjustable and laterally adjustable top pressure bar with digital display, which presses plate-shaped workpieces with ball-bearing rubber rollers (roller pitch 38 mm), including support rollers to extend the support for large workpieces, extendable sideways by approx. 1,500 mm. 4 side guide rollers between the sanding units for secure transport of strips 1 Industrial PC 3.0/4" LCD-TFT color display, 800 x 600 pixel resolution CF card 1GB Operating system: Windows Embedded Standard Touch-screen version with display for production and downtime periods. Ethernet connection available. 2 belt sanding units "M 4" – positions 1 and 2 for sanding straight edges, with intermittent belt blow-off device, belt break detector, tool holder with quick-change device, base plate for sanding tool, prepared for electronic path control for automatic engagement and disengagement of the sanding tool, operating in both climb and counter rotation. Belt dimensions: 2,300 x 80 mm Belt speed: 0/7–12 m/s Motor rating: 3.0 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 2 oscillation devices (positions 1 + 2) For optimal belt utilization 2 belt sanding units "K 4" – positions 3 and 4 incl. stand, for sanding small profile sections, also suitable for edge rounding; can be swiveled 90° upwards and 45° downwards, belt break detector, tool holder with quick-change device, base plate for sanding tool, intermittent belt blow-off device, prepared for electronic path control for automatic engagement and disengagement of the pressure tool, including climb and counter rotation, designed for manual adjustment and digital indicators for the adjustment axes. Belt dimensions: 2,000 x 50 mm Belt speed: 0.5–8 m/s Motor rating: 1.1 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 4 electronic path controls for fully automatic, timed engagement and disengagement of the sanding tool depending on the set feed speed, sanding pressure, and angle position of the units. 2 steel tools for straight edges, equipped for air cushion sanding, incl. base plate, for 1 "M4" unit, item no. 9000191310 2 steel profile tools equipped for air cushion sanding, Dusdpfxsy A D Eco Apwjt incl. base plate, for 1 "K4" unit, item no. 20000025684

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Duodpfolc Ewijx Apwot Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg

Condition: excellent (used), Year of construction: 2014, Roller coater BÜRKLE easy coater RCL 12M and UV system easy cure UV - TRUV with 2 lamps and 2 x roller conveyor BÜRKLE easy coater RCL 1300: For one-sided application on flat surfaces from above Operating side left Touch screen control TP 177 Micro Rubberized application roller Hard chrome-plated metering roller can be sensitively adjusted via worm gearbox Controlled belt transport with exposed counter roller for safe workpiece transport Quick-change system with split bearing and cross-disc coupling for easy changing of the application roller Oscillating squeegee, can be changed quickly for cleaning Separate, infinitely variable FU direct drives for application roller, metering roller and transport Reversible dosing roller Motors and limit switches in Ex version on the machine Non-Ex control cabinet and control panel outside the danger zone on the machine Mobile version Electrical preparation for integrating the roller coating machine into a coating line Technical data Working width: 1300 mm Workpiece height 3 - 80 mm Min. workpiece length 400 mm Rubberized application roller DM 240 mm Chrome-plated metering roller DM 172 mm Transport speed 2 - 15 m/min variable Connected load approx. 2.4 kW Speed of metering roller 1.0 - 3.0 m/min Working height 900 mm (+/- 20) Safety equipment according to CE Incl. switch cabinet Weight approx. 1650 kg UV system e.a.s.y. cure UV - TRUV with 2 lamps One-sided curing of UV-curing lacquers on flat workpieces from above Incl. control cabinet Working width max 1300 mm Workpiece height max 80 mm Number of lamps 2 # - changed 10/2023 UV lamp power 120 W/cm² each Speed 2 - 15 m/min variable Transport: Transport carpet Exhaust air connection 2 x 250 mm Connected load 39 kW Weight approx. 750 kg Dodpfst Dx U Ssx Apwjut 2 x roller conveyor RB 1300 Working width 1300 mm length 4000 mm Speed 2 - 15 m/min variable Connected load 2 x 0.37 kW Total system length 12450 mm

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Djdpfsudxchex Apwjut Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, Wide belt sanding machine for calibrating and fine sanding Working width mm 1,100 Min/ Max. working height mm 4/ 170 Sanding belt width mm 1,115 Sanding belt length mm 2,150 Gear motor kW 2.2 Feed speed m/min variable Infeed and outfeed support rollers for long and short workpieces Dujdpfx Apsitvkujwst Oscillating belt cleaning 1st unit Oscillating belt cleaning 2nd unit Oscillating belt cleaning 3rd aggregate 10” touch screen control panel “eye-S” 1. Aggregate steel roller 2. Aggregate rubberized calibrating roller 85SH 3. Aggregate combi-aggregate pneumatic seg. sanding pad /rubberized sanding roller 35 SH Motore power 1st unit kW 18.5 Motor powert 2nd & 3rd aggregate kW 18.5 Version "B" for RRCS with: Pneumatic switching on and off 1st aggregate Pneumatic switching on and off 2nd aggregate Pneumatic switching on and off 3rd aggregate "MESAR" with elastic segmented sanding pad Pneumatic switching on and off of the sanding pad unit electronic adjustment of the working height SPECIAL PRICE! IMMEDIATELY AVAILABLE

Condition: new, Technical data: Working width mm: 1,350 Min./max. working height mm: 4 - 170 Sanding belt width/length mm: 1,370/2,620 Main motor power kW: 18.5 with inverter Dsdpfx Apjhtuvrjwout Feed speed variable m/min: 3.5 - 18 Working units: 1st unit: "RA" skew-grooved contact roller, Sh 86, diameter 160 mm 2nd unit: Combination: Rubber-coated sanding roller diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad “MESAR” with 24 segments Version C: - Elastic electronic segmented sanding pad “MESAR” complete with: - Pneumatic cylinder (on/off) for automatic engagement/disengagement of the sanding roller sanding pad unit - Activation of segments via electronic control, which synchronizes their operation with feed speed and manages the number of active segments based on the workpiece geometry, allowing selection of more or fewer segments to the left or right of the workpiece. Versions 135: “MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece scanning bar at infeed Additional equipment: Roller table at infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with 4 kW (5.5 HP) electric fan integrated into machine frame Oscillating blow-off device, 2nd unit Touch screen 10.4” display with ‘eye S’ software integration NOTE: IMAGES ARE SAMPLE PHOTOS OF A SIMILAR SD70!

Condition: excellent (used), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with own motor approx. 0.2 kW Sanding belt dimensions 3000 mm x 200 mm Front sanding table 980 x 340 mm rear sanding table 750 x 300 Space requirement L x W x H approx. = 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table with infinitely variable angle adjustment Angle stop on rear work table Oscillation by means of gear motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic belt tension, adjustable Extraction with blower Attachment option for feed unit 2 lateral support tables for radius sanding Note on used machines: Dedpfxeuxqzuo Apwout - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, DMC SD 90 RCS 135 "C-Plus" version Technical specifications: Useful working width mm 1350 min/max Working height (with fixed table) mm 4 – 200 Abrasive belts mm 1,370 x 2,620 Feed speed m/min 3.5-18 working aggregates: “MESAR 46” 46 sectors (30 mm) flexible electronic link sanding pad complete with B/46 workpiece sensing bar in the infeed • 1st position: "RA" diagonally ribbed steel contact roller D=250 • 2nd position: COMBI with rubber-coated grinding roller D=175 mm 65 Sh • Floating pressure shoe in 1st position with pneumatic adjustment • 2 grooved rubber coated pressure rollers 2nd and 3rd position • Oscillating blow-off device 1st and 2nd unit • Workpiece cleaning unit with rotating blast nozzles • Motor 1st unit 18.5 kW • Motor 2 with inverter 15 kW Table: • Fixed table working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and transport carpet 50 Sh • Vacuum table with 4 kW electric fan integrated in the machine frame • Stepless carpet feed from 3.5-18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit "Pro-Sand" • Touch screen 10.4" screen • Door with viewing window on set-up side for machine with 2 working units • LED interior lighting Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. Dodpfx Aped E Ixzeweut • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, working width: 1,250 mm, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. H7 125 Flail Mulcher / incl. slew ring / incl. floating mounting / NEW unit / in stock & immediately available Price: €17,890.00 net / €21,289.10 gross - Working width: 125 cm - Overall width: 140 cm - Depth: 97 cm - Height: 57 cm - Weight: 410 kg without accessories Duodey E Etyjpfx Apwst - Mulches grass and light brush up to 7 cm in diameter - Suitable for excavators from 5 to 15 tonnes - Universal interface for mounting various adapter plates - S420: double-walled housing made from high-strength S420 steel - WEARPLATE: housing with replaceable wear plates - LOW PROFILE: low-profile design - Indirect V-belt drive with 4 belts - Drive designed for hydraulic motors depending on carrier's oil flow - 4D ROLLER: reinforced support roller 152 mm Ø, with double-taper roller bearings, height adjustable - COUNTER CUTTERS: two rows of replaceable drop-forged counter blades - Rotor wall thickness: 12.5 mm - Front chain guard - Rear rubber protection - Colour: red RAL3020 · anthracite RAL7021 OPT 371 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMO flails (standard) - 12 pcs, part number 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29–58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 100 - 300 - Required hydraulic flow rate in l/min (min-max): 55 – 150 OPT 099 Floating Mount (parallelogram linkage) OPT 555 Oscillating Adapter OPT 372 Hydraulic 190° Rotary Device Three hydraulic lines are required: supply, return, and leakage oil. Optional: MS08 adapter plate incl. bolts and installation = €880.00 net Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse, all immediately available! Mr. Herden (phone) will be happy to assist you. We are also happy to provide you with a financing offer upon request. We are an official sales and service partner for: - Westtech - OilQuick - Holp - Magni telescopic handlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB construction machinery - Mercedes-Benz - Iveco With over 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Subject to errors and prior sale! = Further information = Please contact Marius Herden for more information.

Condition: used, Year of construction: 2002, operating hours: 3,680 h, Internal vehicle number: G400103 German vehicle Available immediately at our yard in Kaufungen - Kassel For more information, contact: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) HAMM tandem roller with vibration and oscillation, Type DV 08V Super Complete with standard equipment, CE marking and declaration of conformity, including: - ROPS-integrated operator cabin - Cabin heating - Sound insulation - Edge pressing and cutting system - Cutting wheel - Pressure roller 45°, 5 cm pad - Track indicator for KAG - Hydraulic connection - Bitumen temperature gauge - TÜV inspection - On-board tools and manuals - Safety belt Dusdpfoy Ekncjx Apwot Special paint finish: RAL 8017 / 1001 - Fuel tank 155 liters - Total compaction force 288 / 323 kN Subject to errors and prior sale. We are happy to take your used vehicle in part exchange. Financing available directly through us. GOLEC COMMERCIAL VEHICLES LTD We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. ----.

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 57900 € 1094.31 € 1 650 mm 0,5 - 170 mm 670 x 2200 mm 4000 m³/h 120 mm 6 bar 78 (+/-2) dB 22 kW 2600 mm 1350 mm 2100 mm 1125 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable feed speed via frequency converter 0.6 to 6.5 m/min. Rubber conveyor belt, oil and temperature resistant Automatic conveyor belt centring Lateral guides to prevent the belt from lifting off. Rubber pressure rollers in front and behind each station, oil and temperature resistant Idle rollers at the front and rear table INCL. OPTIONALTAMPICO BRUSH SYSTEM FOR CONVEYOR BELT CLEANING Ø 150 MM 1 . WORKING GROUP - R Balanced contact roller Anti-oil and anti-heat Nitrile rubber coating Adjustable via eccentric shaft for working position and compensation of abrasive belt wear Pneumatic cylinder for automatic feed to working position and for lifting in case of emergency stop. Abrasive belts and/or Scotch Brite can be used. Motorised adjustment and electronic control of contact roll height. Variable speed motor with automatic brake in case of emergency. Pneumatic tensioning system for the abrasive belt. Sanding belt centring system, with electronic photocell. Oscillation adjustment in width and time. Diameter of contact roller Dedpfx Aswiqukopwjut mm 125 Positioning accuracy of the contact roller adjustment mm +/- 0,02 Grinding belt speed m/sek 3-18 Motor power kW 7,5 2. WORKING GROUP - X 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. Transverse movement of the entire group (oscillating) Quick change holder for brushes Brush diameter mm 115 Number of brushes No 8 Oscillation stroke mm 15 Rotation motor power kW 2,2 Revs 1/min 1000 Oscillation motor power kW 0,4 Grinding brush speed m/sec 10,0 Optional accessories: B Group - External barrel brush Ø 150 mm with Scotch Brite Brush € 5150,00 with Wire Brush 0,3 mm € 6060,00 R GROUP - GRINDING BELT Motor 11 kW € 740,00 X GROUP - CUP BRUSHES Motor with variable speed 5,5 kW 350/1100 incl.

Condition: used, OTT MEGAtronic 11 Lacquer Wide-Belt Calibration and Fine Sanding Machine 1st sanding unit: calibration roller, diameter 150 mm, 90° Shore 2nd sanding unit: electronically controlled, segmented membrane sanding pad Working width: 1100 mm MEGA – Lacquer sanding package Feed speed steplessly adjustable: 3–15 m/min Motor power, 1st sanding unit: 11 kW Motor power, 2nd sanding unit: 11 kW, with 2nd belt speed of 4.5 m/sec Additional special equipment: Vacuum table Dodpfey Nl Skox Apweut Vacuum generator 3 kW Abrasive belt oscillation Rigid sanding shoe for solid wood and frame sanding Machine is WORKSHOP-OVERHAULED, in TOP CONDITION, from a crafts business Available from stock in Lieboch

Condition: used, Year of construction: 1997, incl. 3-roller feed, motor: 2.2 kW, electric oscillation, belt speed: approx. 22 m/sec, height-adjustable sanding table, table size: 1000 x 350 mm, infinitely tiltable sanding unit from 0 - 45°, angle scale and mechanical lock, foldable veneer edge sanding device, aluminum sanding shoe, height-adjustable radius sanding table, central extraction port: Ø 140 mm, sanding belt: 3000 x 150 mm. Storage location: Supplier. Duedsy Dd Igjpfx Apwot

Condition: good (used), Year of construction: 2016, operating hours: 2,246 h, mast type: telescopic, lifting height: 13,720 mm, fuel type: diesel, color: other, General information Year of manufacture: 2016 Technical information Engine type: Deutz D 2011 L 03 Empty weight: 6.957 kg Dimensions (LxBxH): 680 x 230 x 249 cm Functional Lifting capacity: 227 kg Working height: 1.572 cm Maximum reach: 1.118 cm CE mark: yes Condition Technical condition: good Visual appearance: good Dedpfsyzby Uex Apwsut Drivetrain Internship / Tier: Stage IIIA / Tier IV interim Condition CE type: CE 244 cm work platform, New tires, Oscilating axle, CE Certificate

Condition: excellent (used), Catalogue number 7976 TECHNICAL SPECIFICATIONS - Max working width: 1100mm - Max working height: 160mm 2 units: 1) Grooved rubber roller for calibration 2) Pneumatic shoe + 2 metal rollers – From above: - 2 slip metal rollers - Pressure device - Working unit - 2 slip metal rollers Dusdpfx Apsy E Iycjwot - Working unit - 2 slip metal rollers - Cleaning brush – From below: - 2 slip rubber rollers - Feed belt - Pneumatic belt oscillation with photocells - Electric table lifting - 2 feed speed options - Operating pressure: 8-10bar - Extraction port diameter: 2x200mm - Total power: 30kW - Overall dimensions (L/W/H): 2230x2020x2050mm - Weight: approx. 3000kg ADVANTAGES – German-made – 2 working units – Used sander, in very good condition Net price: 16,900 PLN Net price: 4,000 EUR depending on the 4.2 EUR exchange rate (Prices may change with major fluctuations)

Condition: used, Year of construction: 2021, operating hours: 757 h, Equipment: all wheel drive, Zoomlion ZA14J Articulated Telescopic Work Platform, AH 16 m * Working height 15.8 m * Platform height 13.5 m * Lateral outreach 8.3 m * Year of manufacture 2021 * Hour meter read 757 * Articulated telescopic steel construction * Drive via 4-cylinder Kubota diesel engine * 2 speeds * Tire size 355/55D625 Duodpfx Aoyq Ac Iopwst * Tread depth 18-20 mm * Non-marking tires * Wheelbase 2300 mm * Wheel configuration 4x4 * Oscillating axle * Overall dimensions 6800 x 2400 x 2500 mm * Weight 7100 kg * Basket load 300 kg * Rotating basket * Hydraulic jib 1250 mm * Steel basket * Basket dimensions (L x W x H) 1770 x 560 x 1100 mm * Basket and floor control * Beautiful machine * Videos via WhatsApp at We will be happy to send you more details and photos upon request. This description does not constitute a binding offer and may contain errors. No guarantee is given for all information. More details and photos are available upon request. Please also visit our website.

Condition: used, Year of construction: 2020, operating hours: 823 h, Equipment: all wheel drive, Telescopic Boom Lift Zoomlion ZT22JE * Working height: 24.4 m * Platform height: 22.4 m * Lateral outreach: 17.9 m * Telescopic steel construction * Powered by 80V electric motor * 4x4 all-wheel drive * 2 driving speeds * Tyre size: 355/55D625 * Non-marking tyres * Tread depth: 14–20 mm * Wheelbase: 2500 mm * Drive configuration: 4x4 Dsdoyq Adrspfx Apwsut * Oscillating axle * Overall dimensions: 11400 x 2500 x 2770 mm * Weight: 12,900 kg * Basket load capacity: 454 kg * Rotating basket * Hydraulic jib: 1840 mm * Basket in steel construction * Basket dimensions (L x W x H): 2360 x 850 x 1100 mm * Basket and ground controls * Clean machine * Videos available via WhatsApp at Detailed data and additional images available upon request. This description does not constitute a binding offer and may contain errors. No guarantee for all details. Feel free to visit our website.