Used Pinkare 12.0 for sale (145)

Condition: excellent (used), Vötsch Type: LTU 60/60 Heraeus Vötsch dryer for coating materials Maximum concentration of flammable substances: 40% of the lower explosive limit (LEL) Maximum temperature of the heating surface: over 750 °C Device description: Dedjzg Tppspfx Anzswa Technical data: Internal volume (usable volume): 0.216 m3 Internal dimensions: width 600 mm, height 600 mm, depth 600 mm External dimensions: overall width 796 mm, height 1725 mm, depth 850 mm Load capacity / payload Total roller track capacity: 55 kg Loading height above the installation floor: 820 mm Weight (net): 275 kg Minimum exhaust air flow rate: 96 m3/h Purge time (5 air changes): 90 seconds Enhanced recirculation air flow rate: 33 m3/h Total steam volume: 0.414 m3 Sound pressure level (according to DIN 45635): < 70 dB(A) Cut-out temperature Temperature limiter (TL) fixed setting: 300 °C Adjustable temperature selector (ATS) adjustable above the rated temperature: 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TL): 1 Adjustable temperature selector (ATS): 2 Rated temperature: 200 °C Electrical data Rated voltage / frequency: 400V, 3/(N)PE, AC 50/60 Hz Rated current: 12.0 A Rated power: 6.0 kW Connected load: 7.0 kW Weight: 275 kg Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: good (used), Keyence Type: VR-6200 + VR-6000 Technical data: Measurable XY range: 300 mm × 150 mm *2 Object table XY travel range: 278 mm × 134 mm Z travel range: 69 mm Load capacity: 4.5 kg Working distance: 75 mm Image acquisition device: 4-megapixel CMOS, B/W Macro mode: Magnification (based on a 15-inch monitor): 12× Horizontal: 24.0 mm Vertical: 18.0 mm Magnification (based on a 15-inch monitor): 25× Horizontal: 12.0 mm Dedjzgr D Eepfx Anzjwa Vertical: 9.0 mm Magnification (based on a 15-inch monitor): 38× Horizontal: 8.0 mm Vertical: 6.0 mm Magnification (based on a 15-inch monitor): 50× Horizontal: 6.0 mm Vertical: 4.5 mm Micro mode: Magnification (based on a 15-inch monitor): 40× Horizontal: 7.6 mm Vertical: 5.7 mm Magnification (based on a 15-inch monitor): 80× Horizontal: 3.8 mm Vertical: 2.9 mm Magnification (based on a 15-inch monitor): 120× Horizontal: 2.5 mm Vertical: 1.9 mm Magnification (based on a 15-inch monitor): 160× Horizontal: 1.9 mm Vertical: 1.4 mm Zoom: 1× to 4× Display resolution: 0.1 μm Height measuring range Without image composition in Z Macro mode: 10 mm Micro mode: 1 mm With image composition in Z Macro mode: 50 mm Micro mode: 30 mm Repeatability (σ) Without image composition in Z 0.4 μm *1 With image composition in Z 1.0 μm *1 Measuring accuracy Without image composition in Z ±2.5 μm *1 With image composition in Z ±4.0 μm *1 Only 50 operating hours! Includes software CD, but no PC! Condition: (Like new!) For further technical information, please refer to the manufacturer. Scope of delivery: (As shown in the picture!) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Keyence Here we offer a 3D profilometer. Technical specifications: Observation and measurement range: Horizontal: mm 24.0 12.0 8.0 6.0 7.6 3.8 2.5 1.9 Vertical: mm 18.0 9.0 6.0 4.5 5.7 2.9 1.9 1.4 Measurement resolution 0.1 μm: Dedpfx Anjzd Uhzjzswa Height measurement: Height measurement range, without image composition in Z: 10 mm 1 mm With image composition in Z: 50 mm 30 mm Repeatability (σ)*1, without image composition in Z: 0.4 µm With image composition in Z: 1.0 µm Width measurement: Measurement accuracy*1, without image composition in Z: ±2.5 μm With image composition in Z: ±4.0 μm Repeatability (σ) *1 1 μm 0.5 μm Measurement accuracy*1 ±5 μm ±2 μm XY travel: 184x88 mm Z travel: 73 mm Includes control unit VR-5000 + software with licenses Type: VR-5200 + VR-5000 For sale from our location! Condition: fully functional + no signs of wear For further technical information, please refer to the manufacturer. Scope of supply: (As shown in the picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer a Heraeus Vöstch dryer for coating materials. Maximum concentration of flammable substances: < 40% of the lower explosive limit (LEL). Maximum temperature of the heating surface: over 750 °C. Device description: Technical data: Internal volume (usable volume): 0.216 m3 Dwjdpfjzd Rrcox Anzja Internal dimensions: width 600 mm, height 600 mm, depth 600 mm External dimensions: overall width 796 mm, height 1725 mm, depth 850 mm Load capacity: Total roller track capacity: 55 kg Loading height above the installation floor: 820 mm Weight (net): 275 kg Minimum exhaust air flow rate: 96 m3/h Purge time (5 air changes): 90 sec. Enhanced recirculating air flow rate: 33 m3/h Total steam space: 0.414 m3 Sound pressure level (according to DIN 45635): < 70 dB(A) Cut-out temperature: Temperature limiter (TB) fixed at 300 °C Temperature selector limiter (TWB) adjustable above the nominal temperature by 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TB): 1 Temperature selector limiter (TWB): 2 Nominal temperature: 200 °C Electrical data: Rated voltage / frequency: 400V, 3/(N)PE, AC 50/60Hz Rated current: 12.0 A, rated power: 6.0 kW, connected load: 7.0 kW Weight: 275 kg Type: LTU 60/60 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), Bystronic Type: ERMM180 Thermoplastic Applicator Application Area The thermoplastic applicator applies a thermoplastic material to rectangular glass panes within a production line for solar modules. The material forms a seal with a second glass pane, which is applied in a later process step. The panes are fed in, processed, and removed on horizontally running belts/conveyors. The thermoplastic applicator is a highly sophisticated machine that must meet many requirements with great precision. For this reason, you should only process raw materials (glass, sealant) that meet the specifications on the following pages. This helps to achieve high-quality and safe production. Performance and Connection Values Maximum transport speed: 18 m/min Height of the glass running surface: 1100 mm Height of the applied sealant bead: 0.5 to 1.2 mm Maximum width of the applied sealant bead: 12.0 mm Required constant input pressure, pneumatics: 6.5 to 8.0 bar Operating pressure, pneumatics: 6.0 bar Compressed air consumption, normal operation: 10 normal liters/min Compressed air consumption during drum change: 500 normal liters/min Average energy consumption per hour: 10 kWh Working temperature of the sealant: 110°C to 130°C Environmental Conditions and Emissions Minimum ambient temperature: +15°C Maximum ambient temperature: +35°C Maximum relative humidity: 75% Sound level: less than 70 dB (A) Requirements for the drums for the sealant Design: Material container D18 according to DIN 6644 – with base (F1) and smooth outer surface (body design, smooth). Capacity: 216 liters Inner diameter: 571.5 mm Height: 874 mm Minimum wall thickness: 1.25 mm Processable glass panes Glass types Glass panes with a smooth surface (float glass) can be processed. Dimensions and Weights Smallest dimensions Largest dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS 1.8* mm 5.0* mm Thickness DS Thermoplastic materials based on poly-isobutylene (butyl) can be processed. The material must be flowable in the range of approximately 110°C to 130°C and exhibit a defined viscosity profile. Use only materials that have proven themselves in practice and that have been approved by the manufacturers of these materials and by Bystronic for the intended use. Detailed product descriptions and information on the handling, storage and disposal of the material used can be found in the information sheets and safety data sheets, which the manufacturers of the materials will gladly provide. Dimensions, gantry robot with glass conveyor Height x Width x Depth: 2800 x 1890 x 2735 mm Weight of the gantry robot: 850 kg Weight of the glass conveyor: 1400 kg Dimensions, drum pumps Height x Width x Depth: 3320 x 1060 x 1200 mm Weight (without drum): 850 kg Weight (with drum): 1100 kg Dwsdpfxjzdyh Hs Anzea Height H at drum pump FP1: 4400 mm Height H at drum pump FP2: 4000 mm Dimensions, control cabinet Height x Width x Depth: 2200 x 1800 x 600 mm Weight: 450 kg The applicator was used with the material Butyl. Condition: used From a test laboratory, in like-new condition, only a few operating hours for testing! Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,408 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 584 mm, spindle motor power: 22,400 W, overall weight: 5,534 kg, number of axes: 4, This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools, ensuring versatility in operations. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details. • Capacities: • Chuck size (main): 10.0 in / 254 mm • Max part swing: 21.0 in / 533 mm • Max cutting diameter (with BMT65 turret): 13.75 in / 349 mm • Max cutting length (varies with workholding): 32.5 in / 826 mm • Bar capacity: 3.00 in / 76 mm • Between centers: 32.5 in / 826 mm • Feedrates (rapids): • X: 472 ipm / 12.0 m/min • Y: 472 ipm / 12.0 m/min • Z: 945 ipm / 24.0 m/min • Axis motors (max thrust): • X: 4100 lbf / 18238 N • Y: 2300 lbf / 10231 N • Z: 5100 lbf / 22686 N • Main spindle: • Spindle nose: A2-6 • Drive system: Direct speed, belt drive • Max torque: 275 ft-lbf @ 500 rpm / 373 Nm @ 500 rpm • Draw tube bore: 3.0 in / 76 mm • Spindle bore: 3.50 in / 88.9 mm • Main spindle C axis: • Max speed: 60 rpm • Max rating: 5.0 hp / 3.7 kW • Positioning (±): 0.01° • Brake diameter: 13.9 in / 353 mm • Brake holding torque: 250 ft-lbf / 339 Nm • Control type: Interpolated motion and positioning • Secondary spindle: • Chuck size: 8.3 in / 210 mm • Spindle nose: A2-5 • Drive system: Direct speed, belt drive • Max rating: 15.0 hp / 11.2 kW • Max speed: 4000 rpm • Max torque: 100 ft-lbf @ 870 rpm / 135.6 Nm @ 870 rpm • Spindle bore ø (non-through): 0.81 in / 20.7 mm • Secondary spindle C axis: • Max rating: 5.0 hp / 3.7 kW • Max speed: 60 rpm • Positioning (±): 0.01° • Brake diameter: 8.5 in / 216 mm • Brake holding torque: 140 ft-lbf / 190 Nm • Control type: Interpolated motion and positioning • Secondary spindle positioning (M119): • Positioning (±): 0.02° • Brake diameter: 8.5 in / 216 mm • Control type: Positioning only • Turret: • Number of tools: 12 stations • OD vs ID tools: Any combination (will vary with turret) • Boring bar rear clearance (from back of turret): 4.00 in / 102.0 mm • Live tooling: • Max speed: 4000 rpm • Drive ratio: 1:1 • Tooling: BMT65 Dsdpfozh Eh Tsx Anzowa • General: • Coolant capacity: 55 gal / 208 L • Air requirements: • Air required: 4 scfm @ 100 psi / 113 L/min @ 6.9 bar • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Minimum air pressure: 80 psi / 5.5 bar • Electrical specification: • Spindle speed: 4500 rpm • Drive system: Direct speed, belt drive • Spindle power: 30.0 hp / 22.4 kW • Input AC voltage (3-phase) – low: 220 VAC; full load amps: 70 A • Input AC voltage (3-phase) – high: 440 VAC; full load amps: 35 A • Dimensions – shipping: • Domestic pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm • Export pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,775 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 584 mm, spindle motor power: 22,400 W, number of axes: 4, This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools and offers a maximum cutting length of 826 mm. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details regarding this machine. • Capacities (S.A.E / Metric) • Chuck size: 10.0 in (254 mm) • Max part swing: 21.0 in (533 mm) • Max cutting diameter (with BMT65 turret): 13.75 in (349 mm) • Max cutting length (varies with workholding): 32.5 in (826 mm) • Bar capacity: 3.00 in (76 mm) • Between centers: 32.5 in (826 mm) • Feedrates (S.A.E / Metric) Dwodpfxszhwx Ds Anzja • Rapids on X: 472 ipm (12.0 m/min) • Rapids on Y: 472 ipm (12.0 m/min) • Rapids on Z: 945 ipm (24.0 m/min) • Axis Motors (S.A.E / Metric) • Max thrust X: 4100 lbf (18,238 N) • Max thrust Y: 2300 lbf (10,231 N) • Max thrust Z: 5100 lbf (22,686 N) • Main Spindle (S.A.E / Metric) • Spindle nose: A2-6 • Drive system: Direct speed, belt drive • Max torque: 275.0 ft-lbf @ 500 rpm (373.0 Nm @ 500 rpm) • Draw tube bore: ø 3.0 in (76 mm) • Spindle bore: ø 3.50 in (88.9 mm) • Main Spindle C Axis (S.A.E / Metric) • Max speed: 60 rpm • Max rating: 5.0 hp (3.7 kW) • Positioning (±): 0.01° • Brake diameter: 13.9 in (353 mm) • Brake holding torque: 250 ft-lbf (339 Nm) • Control type: Interpolated motion and positioning • Secondary Spindle (S.A.E / Metric) • Chuck size: 8.3 in (210 mm) • Spindle nose: A2-5 • Drive system: Direct speed, belt drive • Max rating: 15.0 hp (11.2 kW) • Max speed: 4000 rpm • Max torque: 100.0 ft-lbf @ 870 rpm (135.6 Nm @ 870 rpm) • Spindle bore ø (non-through): 0.81 in (20.7 mm) • Secondary Spindle C Axis (S.A.E / Metric) • Max rating: 5.0 hp (3.7 kW) • Max speed: 60 rpm • Positioning (±): 0.01° • Brake diameter: 8.5 in (216 mm) • Brake holding torque: 140 ft-lbf (190 Nm) • Control type: Interpolated motion and positioning • Secondary Spindle Positioning (M119) (S.A.E / Metric) • Positioning (±): 0.02° • Brake diameter: 8.5 in (216 mm) • Control type: Positioning only • Turret (S.A.E / Metric) • Number of tools: 12 stations • OD vs ID tools: Any combination (will vary with turret) • Boring bar rear clearance (from back of turret): 4.00 in (102.0 mm) • Live Tooling (S.A.E / Metric) • Max speed: 4000 rpm • Drive ratio: 1:1 • Tooling: BMT65 • General (S.A.E / Metric) • Coolant capacity: 55 gal (208 L) • Air Requirements (S.A.E / Metric) • Air required: 4 scfm @ 100 psi (113 L/min @ 6.9 bar) • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Air pressure min: 80 psi (5.5 bar) • Electrical Specification (S.A.E / Metric) • Drive system: Direct speed, belt drive • Spindle power: 30.0 hp (22.4 kW) • Input AC voltage (3 phase) - Low: 220 VAC; Full load amps (Low): 70 A • Input AC voltage (3 phase) - High*: 440 VAC; Full load amps (High*): 35 A • Dimensions - Shipping (S.A.E / Metric) • Domestic pallet: 171 in x 90 in x 98 in (434 cm x 229 cm x 249 cm) • Export pallet: 171 in x 90 in x 98 in (434 cm x 229 cm x 249 cm) Additional equipment • Bar feeder Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, mileage: 216,469 km, power: 235 kW (319.51 HP), first registration: 11/2006, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2027, color: yellow, gearing type: semi-automatic, emission class: euro3, Year of construction: 2006, Equipment: ABS, air conditioning, crane, NOT intended for winter road maintenance. Structure: Body/Superstructure: Tipper/Crane, * Meiller three-way tipper, Crane: Atlas 105.2 - A2, * Year of manufacture: 2006, * Emergency stop, * Elevated platform, * 5+6 control circuits Load capacity table: * 1.90 m = 5,050 kg * 3.70 m = 2,900 kg * 5.40 m = 1,940 kg * 7.10 m = 1,490 kg Equipment: * Cab: M (medium length), * Driver's seat: Comfort air-suspended seat, * Air conditioning, * Roof hatch (steel), * Storage compartment on engine tunnel, * Rear window, * Sun visor, * Axle load, front axle: 8.0 t, * Telligent transmission, * Fuel tank: 300 liters, Technology: * Exterior mirrors, electrically adjustable and heated, * Outside temperature display, * Power windows, * Rotating beacon, * Radio Safety/Environment: * Telligent braking system with ABS+ASR, * Differential lock, rear axle, * Engine brake with constant throttle, * Emission standard EURO 3, Other: Suspension: Leaf spring / Leaf spring, * Engine: 12.0 liter - 235 kW V6 Diesel (OM 501 LA), * Wheelbase: 3900 mm, * Permissible gross weight: 18.00 t * Payload: 7.34 t according to ZLB A grab with swivel servo can be purchased for an additional charge. Since 1972, we have been your reliable partner for everything related to automobiles/commercial vehicles in 28832 Achim, near the Bremer Kreuz. NutzfahrzeugZentrum Behnke always has approximately 200 vehicles in stock, including vans, commercial vehicles, and construction machinery! We offer you attractive financing options at favorable special rates. If you are interested, we will be happy to prepare an individual offer for you! We would be pleased to accept your commercial vehicle/construction machine in part exchange. If a new TÜV (technical inspection) is desired, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional charge. The information provided in advertisements, on the internet, in price tags, and in pictures are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical and data transmission errors. The listed equipment may need to be checked separately. Subject to errors and prior sale. Dwsdpfx Aezkn Alonzea

Condition: used, mileage: 477,929 km, power: 300 kW (407.89 HP), first registration: 08/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2026, color: green, gearing type: automatic, emission class: euro5, Year of construction: 2013, Equipment: ABS, air conditioning, soot filter, Construction: Dsdpfozkn Arjx Anzjwa * Body/Superstructure: Roll-off tipper, * HyvaLift Model 20.51 S / Year of manufacture: 07/2013 * Trailer coupling with trailer brake, * Duo-Matic connection * Oil connection at the rear * Hydraulic locking Equipment: * Cab: M (medium length), * Air conditioning, * Driver's seat: Suspension seat, * Comfort suspension (1.8 Hz), * Fuel tank: 300 L, aluminum, * Sun visor, * Roof hatch (steel), * Telligent - gear shifting, * Auxiliary drive MB 10C, * Rear axle H 7, 13 t, * Reinforced cooling, Technology: * Audio system: CD radio (Bluetooth), * Exterior mirrors, electrically adjustable and heated, * Outside temperature display, * Rotating beacon left/right, Safety/Environment: * Telligent braking system with ABS+ASR, * Engine brake with constant throttle, * Differential lock, rear axle, * Emission standard EURO 5, Other: * 1 previous owner * German first delivery, * Year of manufacture 06/2013, * Axle configuration: 6x4, * Suspension: Leaf spring / Leaf spring, * Engine 12.0 L - 300 kW V6 Diesel (OM 501 LA), * Wheelbase 3900 mm, * Permissible total weight 26.0 t * Permissible total train weight 60.0 t possible, * Tires on 2nd and 3rd axles new, Since 1972, your reliable partner for all things automotive/commercial vehicles in 28832 Achim, at the Bremen motorway junction. Behnke Commercial Vehicle Center always has around 200 vehicles in stock from the areas of vans, commercial vehicles and construction machinery! We continuously offer attractive financing options at favorable special conditions. If you are interested, we will gladly prepare an individual offer for you! We are interested in taking your commercial vehicle/construction machinery in part exchange. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. The delivery of your "new" commercial vehicle is possible through our external partners for an additional charge. The information provided in advertisements, on the Internet, on price tags and in pictures is a non-binding description and does not constitute guaranteed characteristics. The seller assumes no liability/guarantee for typing and data transmission errors. The equipment listed may need to be checked separately. Subject to errors and prior sale.

Condition: used, mileage: 510,565 km, power: 335 kW (455.47 HP), first registration: 08/2009, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: semi-automatic, emission class: euro5, Year of construction: 2009, Equipment: ABS, air conditioning, Equipment: * Bodywork/Structure: 3-way tipper body * Cab: M (medium length) * Trailer brake: 2-line system * Movable cab entry * Air filter: construction vehicle filter * PTO: MB 2C * Driver’s seat: air-sprung comfort seat * Sun visor Dedpfx Anjyul Arjzjwa * Front bumper: steel version * Roof hatch (steel) * Cab: reinforced mounting for rough terrain (6.0 HZ) * Additional step for construction vehicles * Telligent transmission, 16-speed Body: * Dautel bodywork * Bordmatik (automatic drop side) on left Technology: * CD-radio comfort version * Bluetooth hands-free system * Rotating beacon, left/right * Central locking system incl. key * Exterior mirrors, electrically adjustable and heated Safety/Environment: * Voith retarder * Rear axle differential lock * Telligent brake system with ABS + ASR * Emissions standard: EURO 5 Other: * Axle configuration: 8x4/4 * Suspension: leaf / leaf * Engine: 12.0 L – 335 kW V6 diesel (OM 501 LA) * Permissible gross vehicle weight: 32,00 t Since 1972, your reliable partner for all things automotive and commercial vehicles in 28832 Achim am Bremer Kreuz. NutzfahrzeugZentrum Behnke always has around 200 vehicles in stock, including vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at special rates. If interested, we are happy to provide an individual quotation! Trade-in of your commercial vehicle/construction machine is welcome. If a new TÜV inspection is required, we will gladly provide an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection. Delivery of your "new" commercial vehicle by our external partners is possible at an extra charge. The information provided in advertisements, on the internet, price tags, and images are non-binding descriptions and do not constitute warranted characteristics. The seller assumes no liability/warranty for incorrect entries or transmission errors. Listed equipment must be verified separately if required. Subject to change and prior sale.

Condition: used, mileage: 510,565 km, power: 335 kW (455.47 HP), first registration: 08/2009, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: semi-automatic, emission class: euro5, Year of construction: 2009, Equipment: ABS, air conditioning, Equipment: * Body/Construction: 3-way tipper * Cab: M (medium length), * Trailer brake: 2-line system, * Moveable cab entry, * Air filter: Construction vehicle filter, * PTO: MB 2C, * Driver’s seat: Comfort air suspension seat, * Sun visor, * Front bumper: steel version, * Roof hatch (steel), * Cab: suspension for rough roads (6.0 HZ), * Additional step for construction vehicles, * Telligent 16-speed gearbox, Superstructure: * Dautel body * Bordmatik left side Technology: * CD radio comfort package * Bluetooth hands-free system, * Rotating beacons left/right, * Central locking incl. key, * Exterior mirrors electrically adjustable and heated, Safety/Environment: * Voith retarder, * Rear axle differential lock, * Telligent brake system with ABS+ASR, * Emission standard EURO 5, Miscellaneous: * Axle configuration: 8x4/4, * Suspension: leaf/leaf, * Engine: 12.0 L – 335 kW V6 Diesel (OM 501 LA), * Perm. gross vehicle weight: 32.00 t Since 1972, your reliable partner for automobiles/commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always has around 200 vehicles available, including vans, commercial vehicles, and construction equipment! We continuously offer attractive financing opportunities at special rates. If interested, we are happy to provide an individual quotation! Trade-in of your commercial vehicle/construction machine is welcome. If you require a new TÜV inspection, we’re happy to provide an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle by our external partners is possible at additional cost. Dwjdsyul Axjpfx Anzja The information provided in advertisements, on the Internet, in price tags and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing or transmission errors. Listed equipment/features may need separate verification. Subject to error and prior sale.

Condition: good (used), Year of construction: 2005, operating hours: 39,256 h, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, total height: 2,800 mm, total length: 7,000 mm, total width: 7,000 mm, rotational speed (max.): 12,000 rpm, overall weight: 12,000 kg, For sale is a machining center by Deckel Maho, model DMC 60 T. The machine is in good condition and ready for immediate use. Technical data: Year of manufacture: 2005 Operating hours: 39,256 Power-on hours: 72,107 X-axis travel: 780 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Control: iTNC 530 Heidenhain Spindle speed range: 20 - 12,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 125 Nm Tool holder: SK 40 B-axis infinitely adjustable: 150° (-120/+30)° Number of pallets: 2 Pallet size: 630 x 500 mm Max. load: 400 kg Table speed range: max. 30 rpm Number of tool stations: 120 positions Max. tool diameter: 80 mm Dedpfowtft Nox Anzjwa Max. tool diameter with adjacent pocket empty: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg Rapid traverse ( X / Y / Z ): 50 m/min Feed rate: 20 - 15,000 mm/min Total power requirement: 64.2 kVA Machine weight: approx. 12.0 t Floor space required: approx. 7.0 x 7.0 x 2.8 m Included in the offer: Documentation, chip conveyor, coolant system, high-pressure coolant 40 bar through spindle, paper band filter, 2-position pallet changer, tool breakage monitoring Accessories such as clamping devices or tool holders are NOT included in the offer. Transport and loading can be organised throughout Europe at additional cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: used, mileage: 229,812 km, power: 335 kW (455.47 HP), first registration: 03/2009, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2023, color: white, gearing type: semi-automatic, emission class: euro5, total width: 2,550 mm, total height: 3,890 mm, loading space volume: 14 m³, Equipment: ABS, air conditioning, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ BUY ++ Mercedes Actros 3346 K 6x4 Wiedemann Super 2000 8.0/6.0/2.0, water reclaimer superstructure * Wiedemann enviro tec * Super 2000 8.0/6.0/2.0, water recycling * 14,000 liter tank size Dwjdpovh H Dyjfx Anzoa * 2,000 liters of fresh water * 6,000 liters of rinsing water * 8,000 liters sludge volume * Emptying by tilting the tank 45° Vacuum system * Wiedemann & Reichhardt KW 3000 * approx. 3,000cbm/h * approx. 25m suction hose DN 125 * Suction pipe DN 125 w. Duct folder High pressure system * URACA P3-45 G 65 approx. 406l/min at 175bar * approx. 200m HP hose DN32 * Hydraulic flushing hose reel with approx. 60m DN 13 Special features * Suction and HP boom * 5 liter hand washing device * Stainless steel tool box * Control cabinet without display * Radio remote control with display * Device cabinet with two flaps - on both sides * Hose storage * Sound insulation of the pump compartment raised * Working lights * Central lubrication system Technical data * Unladen weight 18,810 KG * GGW 26,000 KG * Length 10,350 mm * Height 3,890 mm * Width 2,550 mm Special equipment: Axle load front axle 9.0 t, Audio system: CD radio comfort (Bluetooth), Exhaust raised behind cab, Compressed air horn, Cab: Movable cab entrance, Cab: Comfort suspension (1.8 HZ), 16-speed gearbox, Reinforced cooling, Air filter: Construction site vehicle filter, Air filter: Cyclone air filter, Power take-off independent of gearbox, Parameterizable special module, Rotating beacon left/right, Automatic circuit breaker, Sun visor, Stabilizer on 1st rear axle, Socket 12 volt, Stone impact protection grille, Front bumper in steel design, Drum brakes front and rear axle, Oil filter on front and rear axles, Oil filter on rear axle Socket 12 volt, Stone guard, Front bumper in steel design, Drum brake front and rear axle, Oil cooler transmission Further equipment: EURO 5 emissions standard, Axle configuration: 6x4, Exterior mirrors electrically adjustable and heated, Exterior mirrors wide angle and heated, left, Exterior temperature display, Battery 165 Ah, Roof hatch (steel), Rear axle differential lock, Cab: M (medium length), Suspension: leaf/leaf, Generator 80 A, Rear axle H 7, 13 t, Disc wheel 300, Hydraulic pump (Meiller pump - 6 pistons), Body/bodywork: Chassis for tipper (additional AV), Body/construction: tipper, Fuel tank: 300 ltr, Engine: 12.0 ltr. - 335 kW V6 diesel (OM 501 LA), Engine brake with constant throttle, Power take-off MB 2C, Wheelbase 3900 mm, Rear window, Seats in cab: Driver's seat, standard swivel seat, Telligent gearshift, Telligent brake system with ABS+ASR, Drum brake rear axle, CB radio preparation, Telephone/fax preparation, Front axle straight, Immobilizer, Thermal insulation glazing, Central locking incl. key, Gross vehicle weight 26.00 t For more detailed information and/or pictures, please contact us directly. You will find a large selection of other vehicles to BUY or RENT under: Subject to changes, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods. The sale is subject exclusively to our general terms and conditions and to the exclusion of any warranty.

Condition: excellent (used), mileage: 344,529 km, power: 265 kW (360.30 HP), first registration: 09/2011, fuel type: diesel, axle configuration: 6x2, wheelbase: 4,500 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, total length: 8,300 mm, total width: 2,550 mm, Year of construction: 2011, = Additional options and accessories = - PTO = Remarks = Wiedemann Reichhardt combi kolkenzuiger (type: 12.0/2.5 - 320) - Inhoud watertank: 2.500 Liter - Inhoud slibwatertank: 8.000 Liter - Achterwaarts kippende opbouw Dwsdpfxjymqbqe Anzsa - Kolkenzuigerarm bovenzijde, links- en rechts verschuifbaar - Welvaartsweegsysteem (type: Delta 30) - Radiografische afstandsbediening - Vacuumpomp Wiedemann (type: KW 3000), 3.000 m³ per uur - Hogedrukwaterpomp Speck bij 400 bar - Uitschuifbare achterbumper - Opbergkist - Aluminium brandstoftank 330 Liter - Adblue tank 60 Liter = More information = Rear axle 1: Lift axle Number of cylinders: 6 Engine capacity: 12.740 cc Empty weight: 15.730 kg Carrying capacity: 10.770 kg GVW: 26.500 kg Technical condition: very good Visual appearance: very good Registration number: BZ-LR-51 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, mileage: 322,000 km, power: 320 kW (435.08 HP), first registration: 08/2010, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: yellow, gearing type: automatic, emission class: euro5, total length: 7,380 mm, total width: 2,550 mm, total height: 3,500 mm, loading space length: 4,200 mm, loading space width: 2,400 mm, loading space height: 400 mm, Year of construction: 2010, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), * Mercedes Benz 1844 All-Wheel Drive 4x4 with PTO 12001 EH with remote control and Meiller three-way tipper - * Diesel - Engine displacement: 11,946 cc³ - 320 kW / 440 hp - Euro 5 EEV - Green emissions sticker - * German vehicle - German vehicle registration document - immediately available - from first owner - * Unladen weight: 11,130 kg - Permissible total weight: 18,000 kg - * Sunroof - Rockinger trailer hitch with 40 mm pin - Retarder - * Please arrange an appointment for viewing - * Contact: Mr. Andreas Vogel * The information provided on the internet is a non-binding description. * It does not constitute a guarantee of characteristics. * The seller is not liable for typing or data transmission errors. * Subject to changes, errors and prior sale. Special equipment: Emission standard EURO 5 EEV, storage compartment on engine tunnel, front axle load 8.0 t, trailer brake 2-line, audio system: CD radio (Bluetooth), battery 220 Ah, air horn, cab: cab - reinforced spring suspension, cab: movable cab entry, generator 100 A, fuel tank: 300 liters aluminum, enhanced cooling, configurable special module, Voith retarder, rotating beacon left/right, reversing warning sound (external warning signal), rear window, protective plate under cooler / engine, seats in cab: driver's seat comfort suspension seat incl. horizontal suspension, sun visor, steel rims 9.00x22.5, 12-volt socket, front bumper in steel design, crossmember for trailer coupling, front axle angled, additional step for construction vehicles, twin-plate clutch, oil cooler transmission Additional equipment: Emission standard EURO 5, axle configuration: 4x2, trailer coupling: towing hitch, trailer socket 24V / 15-pole, exterior mirrors electrically adjustable and heated, exterior mirrors wide-angle and heated, left, outside temperature display, dashboard distributor, sunroof (steel), differential lock rear axle, cab: suspension for poor road conditions (6.0 Hz), cab: S (short), suspension: leaf spring / leaf spring, electric windows, rear axle H 7, 13 t, bevel gear 300, hydraulic pump (Meiller pump - 6 pistons), body/structure: chassis for tipper (additional AV), body/structure: tipper, air filter: filter for construction site vehicles, heated air dryer, model update from 06/2008, engine 12.0 liters - 320 kW V6 diesel (OM 501 LA), engine brake with constant throttle, auxiliary drive MB 2C, wheelbase 3900 mm, disc brake front axle, voltage converter 24V / 12V 8 A, Telligent - shifting, drum brake rear axle, rear underrun protection foldable, preparation for CB radio, preparation for telephone/fax, immobilizer, heat-protective glazing, central locking including key, permissible total weight 18.00 t Dedpfx Aszh Tadsnzewa

Condition: good (used), Year of construction: 2001, sheet width 2520 mm plate thickness 3.0 mm 350 mm Swing beam adjustment 80.0 mm back stop - adjustable ca. 1.000 mm Control FM 5.1 B upper clamping bar adjustment 20.0 mm/sek bending speed 37.0 Grad/sek total power requirement 4.5 kW weight ca. 3.250 kg The ideal solution for individual and series production. A modern design with particularly high rigidity. Designed for continuous performance. Features: - Dynamic, powerful electro-motorized folding machine * Upper beam bending beam drive by geared brake motor * Bending beam drive with roller bearings - FASTI CNC control "TOUCH" - FM 5.1 B * Swiveling control unit, front right * 11.3" color LCD touch screen display * Manual / automatic mode selectable * Input of actual/target values possible (X axis / angle etc.) * Program memory * Tool memory - CNC electro-motorized back gauge * with rear sheet support surface Dedpsy Umd Sjfx Anzjwa - CNC electro-motorized folding beam adjustment - 1x extra set of FASTI split scribing tools - height : 120 mm - EMERGENCY OFF button at the front, with extension cable - 1x free-moving double foot switch - 1x free-moving foot switch - original operating instructions - Smallest bending leg length in mm to sheet thickness : * 7.0 mm with 0.75 mm sheet thickness * 8.5 mm for 1.00 mm sheet thickness * 12.0 mm for 1.50 mm sheet thickness * 16.0 mm for 2.00 mm sheet thickness * 19.5 mm for 2.50 mm sheet thickness * 25.0 mm for 3.00 mm sheet thickness

Condition: used, mileage: 189,736 km, power: 300 kW (407.89 HP), first registration: 06/2014, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: semi-automatic, emission class: euro5, total width: 2,500 mm, total height: 3,880 mm, Equipment: ABS, air conditioning, soot filter, Mercedes-Benz 2641 Putzmeister Concrete Pump BSF 24-4.11 Suspension: Leaf / Leaf Wheelbase: 4500 mm Putzmeister Concrete Pump Type: BSF 24-4.11 Operating hours: 2,031 h Special equipment: Shelf on engine tunnel, Front axle load 8.0 t, Audio system: CD radio (Bluetooth), Battery 220 Ah, Aluminum air tank, Cab: Flexible cabin entry, Cab: with low roof - 1400 mm, Generator 100 A, 16-speed transmission, AdBlue tank: 95 L, Fuel pre-filter, Heated water separator, Fuel tank: 300 L aluminum, Reinforced clutch, Air intake from front, Air filter: construction vehicle type, 2-cylinder air compressor, Engine mount for rough roads, Transmission-independent PTO, PTO MB 2C, Programmable special module, Acoustic reverse warning (external warning signal), Rear window, Automatic fuse, Voltage converter 24V / 12V 15A, Reinforced rear axle stabilizer, 12-volt socket, Transmission oil cooler Further equipment: Emission standard EURO 5, Axle configuration: 6x4, Trailer brake 2-line, Towing hitch: Tow coupling, Trailer socket 24V / 15-pin, Dodpfx Ajy Hyqvsnzjwa Exterior mirrors electrically adjustable and heated, Wide-angle and heated exterior mirror, left, Exterior temperature display, Roof hatch (steel), Rear axle differential lock, Cab: suspension for rough roads (6.0 HZ), Cab: M (medium length), Suspension: Leaf / Leaf, Rear axle H 6, Crown wheel 440, Model revision from 06/2008, Engine 12.0 L - 300 kW V6 diesel (OM 501 LA), Engine brake with constant throttle, Disc brakes, Cab seats: Standard driver's air-suspension seat, Telligent shifting system, Telligent brake system with ABS+ASR, Front underrun protection, Telephone/Fax preparation, Cranked front axle, Immobilizer, Heat-insulating glazing, Central locking with key, Perm. total weight 26.0 t We are happy to assist you with financing/leasing through our partners. All information without guarantee. Subject to change and prior sale.

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg Dwodpfjwc Rk Esx Anzea ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Dsdpewc Afhjfx Anzswa Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: new, functionality: fully functional, fuel type: hybrid, color: blue, overall weight: 2,900 kg, empty load weight: 2,900 kg, operation weight: 2,900 kg, lifting power: 2,980 kg/m, tire condition: 100 %, Year of construction: 2024, operating hours: 1 h, Equipment: adjustable boom, crane, hydraulics, low noise, onboard computer, rubber tracks, 🔧 Key Specifications: • Year: 2024 • Operating hours: 1 h (NEW) • Max capacity: 2,980 kg (main boom) / 1,000 kg (with jib) • Max lifting height: 16.95 m (with jib) / 12.0 m (main boom) • Max working radius: 14.3 m • Power: Bi-energy (diesel + electric + battery) • Remote control: Fully proportional radio control • Hydraulic winch: Yes • Jib: Hydraulic telescopic jib included • Undercarriage: Variable crawler gauge • Outriggers: Automatic multi-position outriggers • Tracks: Rubber tracks (non-marking) • Weight: approx. 2,900 kg • CE certification: Yes ✨ Highlights: ✅ Bi-energy spider crane (diesel + electric operation) ✅ Suitable for indoor & zero-emission working ✅ Fully proportional remote control ✅ Hydraulic winch for precise lifting operations ✅ Hydraulic telescopic jib for extended reach ✅ Variable crawler gauge for maximum stability ✅ Automatic multi-position outriggers ✅ Compact design for confined spaces ✅ Ready for immediate deployment ⚙️ Condition: New machine — never used. Factory-new condition with full inspection and CE certification. 🌍 Location & Price: 📍 Sittard, Netherlands 🚚 Worldwide delivery available 💰 Price: €119,500 (EXW / excl. VAT) 🚚 Delivery: • Crane loading available Dsdpfx Asy Hqhronzjwa • Flexible transport options • Handled by Collé Rental & Sales logistics

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 476 h, overall weight: 11,860 kg, power: 407 kW (553.37 HP), Engine: Deutz TCD 12.0 L6, 407 kW Year of manufacture: 2024 Serial number: 21060084 Location: NRW Total operating hours: 476 h Engine operating hours (new): 91 h Rotor operating hours: 207 h Availability: by arrangement Equipment: 2 horizontal infeed rollers 2 vertical infeed rollers Infeed size: 1000 x 625 mm Max. log diameter: Ø 620 mm Djdpfx Anszcn Igezjwa Number of knives: 3 pcs. Counter blade: 1 pc. Capacity: up to 150 m³/h Weight: 11,860 kg Radio remote control Spiral fan HD infeed chain Baskets: 50, 70, 100 mm The machine is in excellent, like-new condition and can be inspected during chipping operations by arrangement! Warranty: The machine is sold in the condition it is in at the time of delivery. The seller assumes no liability for defects. We reserve the right to make interim sales, changes and repairs. This overview serves only as a source of information and does not constitute a binding offer.

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 850 mm, total length: 3,000 mm, total width: 1,500 mm, table height: 850 mm, table width: 1,500 mm, overall weight: 800 kg, height adjustment type: mechanical, Welcome, The welding table manufacturer, ATRIBU, offers a new welding table designed for both professional industrial environments and demanding hobbyist workshops. Short Description: DIMENSIONS: Tabletop: 3000 x 1500 mm with 200 mm high side walls. Both tabletop and side walls are 15.0 mm thick. HOLE SYSTEM: Precision-milled and chamfered holes, System 28 mm, 100 x 100 mm grid, with engraved scale/grid. MATERIAL: S355 J2+N Steel (high-strength structural steel). REINFORCEMENTS: Internal ribbing (160 x 6 mm plates) spaced every 40 cm for maximum stability. TOLERANCES: Maximum deviation of 0.5 mm per meter length. Maximum angular deviation of 0.5°. LEGS: 80 x 80 x 3 mm profiles, bolted, height-adjustable with swivel feet. Height adjustment range: 85–90 cm. PRICE: The price includes the table with standard metal-profile legs (wheels are not included in the base price). Swivel castors in various load capacities are available as an option for an additional fee. Full VAT invoices are issued. Detailed Description: Our tables are manufactured from high-grade S355 J2+N steel. The use of harder structural steel significantly reduces premature hole wear and ensures maximum structural durability. All holes are precision-milled and chamfered for optimal fit and tooling quality. Side walls are also made of S355 steel and feature a double row of holes. Table flatness remains within a maximum tolerance of 0.5 mm per meter. For tables of this size, we typically achieve a flatness of 0.2 mm per meter, ensuring near-perfect surfaces. The tabletop is protected with a mill scale layer for initial corrosion resistance. Additionally, each table is treated with a professional anti-spatter agent with a corrosion inhibitor prior to shipment. [Our welding tables are not plasma nitrided.] Robust internal ribbing provides necessary rigidity, even when welding heavy or complex assemblies. We also supply a full range of professional tools and accessories. Shipping: Affordable shipping across Europe is available (approx. 50–300 EUR depending on table dimensions). VAT Information: For private customers: Local VAT rates apply. Intra-community supply (B2B): With a valid EU VAT number, purchase at 0% VAT is possible. Custom Orders & Other Systems: Need a different size or thickness? We are happy to design and manufacture a customized solution for your requirements. Available Systems & Specifications: Hole Systems: System 28 / System 16 Tabletop Thicknesses: 8.0 mm / 12.0 mm / 15.0 mm Standard Sizes: 1200 x 800 mm 1200 x 1200 mm 1800 x 800 mm 2000 x 1000 mm 2400 x 1200 mm 3000 x 1500 mm Dedpfx Anjy Atrxozjwa Options: Wheels with 300 kg or 100 kg load capacity, HEX grid (additional holes), 50 x 50 mm grid. Available Accessories: Table extensions, towers, clamps, squares, bolts, accessory organizers, and more. Note: Welding tables are supplied without accessories. Please consult our catalog to select your tooling set. How to Order / Contact Us: Inquiry: Please send us an email with your requirements (size, thickness, etc.). We highly recommend requesting our comprehensive catalog, as selecting the right accessory set is essential for efficient work. Order: Once you’ve finalized your configuration, orders can be placed via email. We look forward to hearing from you! We welcome both long-term cooperation and single orders. Best regards, Team ATRIBU

Condition: ready for operation (used), Year of construction: 2005, operating hours: 39,256 h, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller model: Heidenhain iTNC 530 , rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range X-axis: 780 mm Travel range Y-axis: 560 mm Travel range Z-axis: 560 mm B-axis, infinitely adjustable: 150° (-120°/+30°) Rapid traverse rate (X / Y / Z): 50 m/min Feed rate: 20 - 15,000 mm/min Spindle speed (max.): 12,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 125 Nm Tool interface: SK 40 Number of pallets: 2 Pallet size: 630 x 500 mm Max. load: 400 kg Table speed range: max. 30 rpm Number of tool positions: 120 Max. tool diameter: 80 mm Max. tool diameter with free adjacent tool pocket: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg MACHINE DETAILS Control system: Heidenhain iTNC 530 Total power consumption: 64.2 kVA Dimensions & Weight Dwjdpfezcqa Sex Anzoa Footprint: approx. 7.0 x 7.0 x 2.8 m Machine weight: approx. 12.0 t Operating Hours Operating hours: 39,256 h Power-on hours: 72,107 h EQUIPMENT Chip conveyor Coolant system High-pressure cooling 40 bar through-spindle coolant Paper band filter Pallet changer, 2 positions Tool breakage monitoring According to the seller, the spindle was presumably replaced. However, no service report is available to confirm this. The machine's data storage was renewed in January 2026. No CE declaration of conformity is available in DIN A4 or PDF format.

Condition: used, mileage: 339,421 km, power: 175 kW (237.93 HP), first registration: 05/2017, fuel type: diesel, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, loading space length: 8,740 mm, loading space width: 2,500 mm, loading space height: 2,080 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, tail-lift, Mercedes-Benz Atego box 1224 8.74 m long * May 3, 2017 * 339,421 km * Front axle, 5.3 t * Rear axle, crown gear 390, hypoid, 11.0 t * Differential lock rear axle * Axle ratio i = 3.909 * Electronic braking system with ABS and ASR * Electronic compressed air supply unit, low * Heating, electronic compressed air supply unit * Disc brake, on front and rear axles * Condensate monitoring, for compressed air system * Wheelbase 5360 mm * Fastening parts, for flatbed * Steering ZF 8095 * Stabilizer, under frame, rear axle * Front underrun protection (ECE), steel * Protection device, side * Splash guard, in fender * Frame overhang extended, 200 mm * Elimination of rear underrun protection (ECE) * Driver's suspension seat, comfort * Passenger's fixed seat, single * Armrests, both sides, driver's seat * Seat cover, velour, driver's seat * Seat cover, velour, passenger's seat, middle seat * Classic cockpit * Electric windows, both sides * Air conditioning * Pollen filter * Storage, above windscreen, 1 compartment * Storage, high, on engine tunnel * Roof hatch/roof ventilation flap * Battery cover * Batteries, 2 x 12 V/165 Ah, low-maintenance * Generator 28 V/100 A * Circuit breakers * Additional socket 12 V/15 A, parapet * Switch no. 1 for external body electrics * Cable remote control for air suspension * Preparation for tail lift control * Sun visor outside, transparent Dwedpfjpcdr Tex Anzja * Front mirror, heated * Main mirror, electric, driver's side * Cab entrance, two-stage * Immobilizer, with Transponder * Gearbox G 90-6/6.70-0.73 * Tires tubeless, 265/70 R 19.5 VA * Wheel formula 4x2 * 12.0-tonner * Flatbed chassis * Light series, new generation up to 21 t * Light vehicles up to 21 t * Air suspension, rear axle * Instrument cluster, 10.4 cm * Tachograph manufacturer VDO * Digital tachograph, EC, speed, without ADR * CD radio, Bluetooth * FleetBoard Eco Support * Preparation for toll collection * Wheelbase 5660 mm * Plastic tank 180 l, left * AdBlue tank 25 l * Tanks, lockable * Fog lights, halogen * Work lights maneuvering aid * Engine OM936, R6, 7.7 l, 175 kW (238 hp), 1000 Nm M5M engine version Euro VI, with OBD-C * Engine brake, standard system * ENGINE BRAKE PERFORMANCE STANDARD * Tail lift package * Front spring, 5.1 t, parabola * Cross member, retrofitted AHK G145 ZAA R0Z wheel nut cover * Steep shoulder rims 6.75 x 19.5 * Spare wheel jack, side * Stability control assistant (ESP) * Lane keeping assistant * Active Brake Assist * Speed limiter 90 km/h / 56 mph, ECE S5Z cruise control * All information without guarantee

Condition: like new (used), functionality: fully functional, 1. Like-new tubular heat exchanger (HT) for steam against water or water against water, liquid medium against steam or water. Material: Stainless steel – all parts in contact with the medium. Head plates of the baffle chambers made of P265GH; inside surface platinum-plated with stainless steel. Support consoles made of P265GH. Dwedpezc R Tfjfx Anzja Suitable for recovering cooling water or flash steam; Sustainable energy utilization. Heat exchange surface area: 905 m². Heat output – depending on the medium, well over 1,000 kW. Water flow rate up to 700 m³ / hour. Tube-side pressure: 4.0 bar gauge; test pressure: 9 bar gauge. Shell-side pressure: 9.0 bar – test pressure: 16 bar gauge. Maximum temperature: 140 °C. For heat recycling or cooling, heating, heat exchange. Total weight: 12.0 tons. Dimensions: Length 6,500 mm; outer diameter 1,500 mm. Volume: 11,500 liters. The HT has been approved by Bureau Veritas as a pressure vessel – all documents are available.