Used Pmf 465 for sale (307)

Condition: good (used), electric motor, three-phase motor -Manufacturer: Wolf, electric motor type 1LG4186-4AA60-Z 180L Ndodpfx Ahsyq Hade Sec -Power: 22 kW -Speed: 1455 rpm -Protection class: IP55 -Shaft: Ø 48 x 110 mm -Design: B5 -Dimensions: 720/350/H450 mm -Weight: 184 kg

Condition: used, Year of construction: 2022, Carrier unit weight class: 5–9 t Operating weight (without swivel mechanism): 465 kg Product weight (without swivel mechanism): 400 kg Njdpfx Ahj Acd I Se Sjdc Jaw opening, max.: 1,585 mm Grab width: 705 mm Max. closing force: 2.4 t Load volume: 0.25 m³ Oil flow (opening/closing): 35–50 l/min Operating pressure: 300 bar Oil flow (rotation): 10–15 l/min Max. operating pressure (rotation): 170 bar

Year of construction: 2024, operating hours: 2 h, condition: new, functionality: fully functional, For sale is an as-new spiral cooling tower made of stainless steel 304. As a precautionary measure, the basket was completely shot-blasted, and every single stainless steel component was pickled and then hand-polished. All screws and nuts have been replaced with new ones, all shafts have been replaced with stainless steel, and all ball bearings have also been replaced with stainless steel deep groove ball bearings. Replacement motors (drive for the basket and for the modular belt), as well as approximately 20 meters of modular belt, are included as spares. Total modular belt width: approx. 340 mm, blue area width approx. 280 mm, outer side areas on the right and left made of stainless steel. Total belt length: 100 m. Number of tiers: 9. Spacing between each tier: 105 mm. Overall tower height: 2060 mm. Njdpfeyvrvpox Ah Sjdc Overall length incl. discharge belt: approx. 4000 mm; discharge section: approx. 2000 mm; total width: 2235 mm; running surface inner width: 370 mm; running surface outer width: 465 mm. Modular belt is made of stainless steel and POM. This spiral cooling tower also comes with a Z-belt. The Z-belt shown is for reference only and is not the original.

Condition: used, Year of construction: 2008, turning diameter / mm centre distance / mm swing diameter / mm Manufacturer: DMG GILDEMEISTER Model: CTX 510 eco Year of manufacture: 2008 Machine type: CNC lathe / turning center Control system: Siemens SINUMERIK 810D Powerline Max. spindle speed: 3,250 rpm Spindle speed range: approx. 500–3,250 rpm Spindle power: 33 kW at 40% duty cycle / 22 kW at 100% duty cycle Spindle torque: 630 Nm at 40% duty cycle / 420 Nm at 100% duty cycle X-axis travel: 300 mm Z-axis travel: 1,050 mm Max. turning diameter: 465 mm Max. swing / turning diameter: 680 mm Spindle bore / bar capacity: approx. 76–92 mm (depending on configuration) Front spindle diameter: 140 mm Nedpfszu A Ukjx Ah Sjdc Turret: 12-station Driven tool speed: up to 4,000 rpm Driven tool power: approx. 8.4 kW Chuck: 250 mm or 315 mm Max. workpiece weight between centers: 350 kg Total power requirement: approx. 50 kVA Power supply: 400 V, 50/60 Hz Machine weight: 7,500 kg Incl. chip conveyor Note: All technical specifications are for guidance only and are subject to change. Actual machine data may vary due to different equipment variants and subsequent modifications. No warranty or guarantee is provided regarding the accuracy or completeness of the technical specifications. The specifications and actual condition of the offered machine are the sole determining factors.

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 465 mm, controller manufacturer: FANUC, controller model: i Series, table load: 500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 20, number of axes: 3, This 3-axis DOOSAN VC 3600 was manufactured in 2018. It features an X-axis travel of 520 mm, Y-axis travel of 360 mm, and Z-axis travel of 465 mm. The machine includes a table size of 650 × 375 mm and a load capacity of 500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN VC 3600 vertical machining centre we have for sale. Contact us for further details. • Table Dimensions: 650 × 375 mm • Spindle Power: 5.5 / 7.5 kW • Total Part Count (Pezzi Totali): 114,937 parts Nedpfx Asy Uwzbsh Sjdc • Operating Time (Tempo Lav): 858 h 41 min 59 sec • Cutting Time (Tempo Taglio): 3,329 h 25 min 12 sec • Power On Time (Acceso): 13,604 h 41 min • Cycle Time (Tempo Cic): 0 h 1 min 59 sec • Documentation: Instruction manuals and CE declaration of conformity included Additional equipment • D'Andrea TRM/50 boring head attachment • Gerardi vise (345 × 120 mm) • Chip conveyor system Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2004, DMG Prima 225/465 microset high precision tool presetter with PC, dual screens, printer, keyboard, mouse, Dymo label printer & assorted location pots. Nedsz Hz Aujpfx Ah Sjdc Maximum tool ø450mm (based On A 225mm measuring radius). Maximum measuring length (Z-axis) 465mm.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 590 h, HUBTEX MU 20 OP – Electric Multidirectional Side Loader For sale is a high-quality HUBTEX electric multidirectional side loader in good condition. Technical Data Manufacturer: HUBTEX Maschinenbau GmbH (Germany) Model: MU 20 OP Series: 2121-ELS Year of manufacture: 2016 Drive: Electric, 48 V Load Capacity: 2,000 kg at 600 mm load center Ndodpfx Aeyiuikoh Ssc 1,500 kg at 800 mm load center 1,200 kg at 1,000 mm load center Lifting height: up to 6,100 mm Travel speed: up to 8 km/h Battery: 48 V / 465 Ah (EPzS) incl. charger (Original battery still in use) Unladen weight (without battery): approx. 5,420 kg ⚙️ Features & Special Equipment Multidirectional steering system (longitudinal, transverse, diagonal & circular drive) Elevated operator/ order-picking platform HUBTEX HIT2 on-board computer with color graphic display Joystick control for drive and lifting functions Manual telescopic & folding forks Safety equipment according to EN 1726-2 Ideal for handling long goods and pallets 🏭 Areas of Application – Perfectly suited for: Very narrow aisle and racking warehouses Long goods (profiles, pipes, timber, metal) Industry & logistics Service has been carried out regularly by professionals. Original price 10 years ago: 123,000.- Only 587 operating hours. Viewing is welcome. For further questions or clarifications, please contact us.

Condition: like new (used), functionality: fully functional, spindle diameter: 30 mm, rip fence adjustment: manual, actuation type: electric, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,000 rpm, overall weight: 800 kg, Equipment: CE marking, SCM T130 Undercut Spindle Moulder | 7.5 kW | Robust and reliable SCM T130 undercut spindle moulder – an industrial-grade machine, ideal for joineries, production facilities, and demanding users. Equipment ready for operation – precision, power, and ease of use in one. TECHNICAL SPECIFICATIONS: Motor power: 7.5 kW Control: from the control panel (comfortable operation) Spindle adjustment: electric Total spindle height: 200 mm Spindle diameter: 30 mm Spindle speed: 3000 / 4500 / 7000 / 10000 rpm Ndodpjy S Tt Usfx Ah Soc Speed change: via belt Dust extraction: 2x 120 mm nozzles Long tables Certificate: CE Why choose this machine? Strong and stable construction – no vibrations, perfect machining quality Electric spindle adjustment – quick and precise setting changes Wide speed range – suitable for various materials and tools Professional machine for intensive use SCM brand – a proven manufacturer in the woodworking industry Machine dimensions: Length: 260 cm Width: 110 cm Height: 120 cm Weight: 800 kg Where can you see our machines? JBS WOODWORKING MACHINERY Wolica Druga 26 23-310 Modliborzyce Lublin Voivodeship It is possible to test the machine on-site. Financing options available through leasing or installments. We arrange transport. jbsmaszyny.pl tel: 664 335 465

Condition: used, Year of construction: 2021, Year of manufacture: 2021 New: No Colour: Black Empty weight: 718 kg Dimensions (LxBxH): 121 x 80 x 95 cm - Year: 2021 - Documentation available: No - CE certificate present: No - Serial number: 302505752 - Drive: Electric - Battery information: - └ Brand/Type: 03 EPZS 0465 SC - └ Battery year of construction: 2021 - └ Capacity: 465Ah - └ Battery voltage: 48V - └ Tray length [mm]: 1210 - └ Tray width [mm]: 355 - └ Tray height [mm]: 815 - Type: Battery - Transport dimensions: 1210mm x 800mm x 950mm (l x w x h) Ndsdpfx Ahszvah Do Ssc - Transport weight [kg]: 718kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 465 h, load capacity: 237 kg, empty load weight: 1,500 kg, Vehicle description 2 pcs GENIE GS1932 Both year of manufacture 2013 Both with NEW BATTERIES!! Both absolutely identical design Platform 1: 465 hours according to counter Platform 2: 355 hours according to counter (Platform 2 is sold) Approx. 1,500 kg own weight 227 kg lifting capacity 7.8 meters working height Work platform can be extended by 76 cm in length Incl. all documentation and CE! Ndsdpsx I Dywjfx Ah Sec Upon request, new Austrian inspection book before delivery! Sale price: EUR 5,500 net per unit! Affordable delivery available!

Condition: excellent (used), mileage: 88,359 km, power: 105 kW (142.76 HP), first registration: 05/2020, fuel type: diesel, wheelbase: 4,320 mm, fuel: diesel, fuel tank capacity: 71 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, loading space length: 4,290 mm, loading space width: 2,080 mm, loading space height: 2,400 mm, Year of construction: 2020, Equipment: ABS, AdBlue, USB port, air conditioning, airbag, central locking, electric window regulation, power assisted steering, power mirror, tail-lift, traction control, = Further options and accessories = - Outside temperature display - Heated side mirrors - Passenger airbag - Cargo area lighting - Hill start assist system - DAB radio - Electric front windows - EURO 6 - Driver airbag - Height-adjustable steering wheel - Light sensor - Emergency call system - Radio - Lane keeping assist - Thermal glass = Further information = General information Cab: single Technical information Number of cylinders: 4 Engine displacement: 2,143 cc Weights Unladen weight: 3,035 kg Payload: 465 kg GVW: 3,500 kg Functional Tail lift: DHOLLANDIA DHLC.08, rear tailgate, 750 kg Loading platform height: 104 cm Maintenance APK (Main Technical Inspection): New TÜV upon delivery Nedpfx Ahjx N R Nhs Sedc Condition Technical condition: very good Cosmetic condition: very good Damages: none

Condition: good (used), mileage: 225,433 km, power: 110 kW (149.56 HP), first registration: 01/2023, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, total length: 7,150 mm, total width: 2,200 mm, total height: 3,220 mm, loading space length: 4,350 mm, loading space width: 2,100 mm, loading space height: 2,150 mm, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, electric window regulation, power mirror, tail-lift, traction control, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Tail lift - Manual - Radio/cassette - Fabric = Notes = Configuration: 4x2, Payload: 994 kg, Unladen weight: 2506 kg, Gross vehicle weight: 3500 kg, Towing capacity, unbraked: 750 kg, Towing capacity, center axle, braked: 2000 kg, Cabin type: Single cab, Air conditioning, Number of airbags: 1, Parking assistance: None, Electric windows, Electric mirrors, Radio/cassette, Carplay, Color: White, Heated mirrors, Lighting type: Halogen lamp, Air conditioning, Bluetooth, Engine power: 110 kW (148 Hp), Number of cylinders: 4, Engine displacement: 1950 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: additionally extended, Side panels, Roof rack: None, Side doors: 1, Rear closure: Tail lift, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat covering: Fabric, Seat adjustment: Manual, Tail lift, Tail lift design: Rear door, Tail lift capacity: 750 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Steel and aluminum, Tail lift size: 218x160, ac automatic EURO6 carplay org NL, Tire type: All-season tires = Additional Information = General Information Number of doors: 1 License plate: VTJ-32-D Axle Configuration Tire size: 235/65R16 Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire tread depth left: 8 mm; Tire tread depth right: 8 mm Axle 2: Tire tread depth left: 1 mm; Tire tread depth right: 1 mm Weights Unladen weight: 2,506 kg Payload: 994 kg GVW: 3,500 kg Functional Tail lift: Dhollandia, Rear door, 750 kg Loading area height: 88 cm Maintenance APK (Periodic Vehicle Inspection): valid until 01.2027 Condition Technical condition: good Nsdpfx Ahszx R H Ns Sedc Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €465 per month (delivery van, 72 months); Ask for more information and conditions.

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 350 mm, TECHNICAL DATA Turning diameter: max. 465 mm Turning length: 1050 mm Diameter when turning: 680 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1050 mm Control system: Fanuc Series 21I-TB Spindle speed range: Max. 3500 rpm Drive power: 33 kW Torque: max. 630 Nm Bearing diameter in the spindle: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Tool post stroke: 150 mm Ndodpfx Ahov Epzvo Soc Rapid traverse X/Z: 30 m/min Number of tool positions: 12 positions Tool holder: VDI 40 Accessories: Chip conveyor Tool holders, chuck jaws

Condition: used, Year of construction: 2012, x-travel 800 mm y-travel 950 mm z-travel 1020 mm Control SIN840D sl B - axis 360 x 0,001 ° A - axis -180 / +45 x 0,001 ° feed x-axis 1 - 65.000 mm/min feed y- axis 1 - 50.000 mm/min Njdszz Afcjpfx Ah Ssdc Feed z- axis 1 - 80.000 mm / min. rapid traverse X/Y/Z 60 / 50 / 80 m/min spindle turning speed - stepless 1 - 16.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 35,00 KW max. torque at 40% / 100% load 223 / 160 Nm spindle diameter in front bearing 80 mm tool taper HSK-A63 tool magazin: 50 tool length - max. 400 / 465 mm tool diameter 72 mm tool diameter with 2 vacant positions 160 mm tool total weight 8,00 kg size of pallet 630x630 mm workpiece weight 700 kg interference diameter 900 mm total power requirement 50,00 kW weight of the machine ca. 26,00 t dimensions of the machine ca. 7,00 x 4,50 x H3,50 m 5-axis machining center with SIEMENS Sinumerik 840D SL control, integrated KNOLL coolant unit, sitchable to minimal quantity lubrication coolant through the spindle max. 80bar, chip conveyor.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 7,416 h, load capacity: 5,000 kg, lifting height: 6,500 mm, free lift: 2,070 mm, load center: 700 mm, fuel type: diesel, mast type: triplex, construction height: 3,060 mm, power: 55.4 kW (75.32 HP), motor manufacturer: Deutz TD2,9L4, gearing type: hydrostat, fork length: 1,400 mm, tire condition: 10 %, front tire type: cushion tires (black), rear tire type: cushion tires (black), empty load weight: 9,300 kg, total length: 4,500 mm, total width: 2,230 mm, Equipment: UVV, cabin, centralized greasing system, lighting, - Heater, fully enclosed cabin, joystick, rotating beacon, windshield wiper - LED headlights on the mast and on the cabin - Central lubrication system - Fork adjustment device Nedpfx Ahsz Hwd Ue Sjdc - Tires are at the limit of their service life - The machine is ready for operation and use.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 17,058 h, load capacity: 5,000 kg, lifting height: 6,500 mm, free lift: 2,070 mm, load center: 700 mm, fuel type: electric, mast type: triplex, construction height: 3,060 mm, battery model: PzS, battery capacity: 930 Ah, remaining battery capacity: 50 %, battery voltage: 80 V, fork length: 1,400 mm, front tire type: cushion tires (black), rear tire type: cushion tires (black), Equipment: centralized greasing system, lighting, - Comfort cabin, 800 mm wide, tinted windows, front and rear windscreen wipers, sliding window on the right, joystick with integrated direction selector on the armrest, air-suspended comfort seat, interior lighting. - LED headlights front and rear, additional work lights on the cab roof and the lifting frame. Nsdpfx Aoy Sablsh Ssdc - Additional equipment: secondary battery (powerpacks), central lubrication system, roof wiper, hydraulic fork adjustment, electric heating with cab ventilation, beacon on cab roof, reversing camera.

Condition: good (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: N 350065, operating hours: 10,350 h, power: 91.94 kW (125.00 HP), fuel type: diesel, maximum speed: 30 km/h, color: red, motor manufacturer: Perkins, gearing type: semi-automatic, Equipment: air conditioning, cabin, lighting, power shift gear, Dynashift gearbox Nsdsx Tcu Ropfx Ah Sjdc Front linkage Front axle and cab suspension

Condition: excellent (used), Year of construction: 2009, operating hours: 41,750 h, functionality: fully functional, clamping force: 2,800 kN, screw diameter: 55 mm, displacement volume: 404 cm³, Equipment: documentation/manual, Model: Engel Speed 280/55 Year: 2009 Screw diameter: 50 mm Injection volume: 404 ccm Screw speed: 340 rpm Injection rate: 1901 ccm/s Spec. injection pressure: 1390 bar Spec. injection pressure increased: 2025 bar Nozzle stroke: 465 mm Clamping type: Toggle Njdpfx Aeyzhy Uoh Ssdc Working hours: approx. 41,750 h

Condition: used, lifting height: 13,500 mm, fuel type: electric, General information Year of manufacture: 2013 Drivetrain Drive: Wheel Weights Empty weight: 7.590 kg Functional Lifting capacity: 750 kg Working height: 1.550 cm Dimensions of cargo space: 465 x 244 x 226 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Production country: NL Additional information Please contact Christian Theißen for more information Manufacturer: Holland Lift Model: Monostar Q-135EL24 Year of build: 2013 Condition: Used Data: Max. working height: 15,45 m Max. platform height: 13,45 m Lifting capacity: 750 kg Lifting capacity on extension: 750 kg Drive type: Battery Ndedpfsv Tiwtsx Ah Ssc Platform dimensions LxW: 4,23 x 2,26 m Platform length pushed out: 6,02 m Total dimensions LxW: 4,65 x 2,44 m Height transport position with railing: 3,02 m Height transport position without railing: 2,26 m Movable up to working height: 15,45 m Ground clearance: 0,16 m indoor use only: neo Empty weight: 7.590 kg Special features: white wide tires, high load capacity, large platform.

Condition: good (used), Renz Punch 500 Perforator The unit is in very good condition. It is a newer model featuring adjustable side guides. Electrically driven and operated via a foot pedal. Includes a 3:1 pitch perforation tool (4 mm hole) with a thumb-cut (hanger notch) feature. Manufacturer’s description: Perforation machine with a working width of up to 500 mm. Designed for continuous operation and heavy-duty use. Operating cycle triggered by a foot pedal. Perforates up to 40 sheets (4 mm) in a single cycle. Quick and easy replacement of perforation dies. Compatible with dies both with and without a thumb-cut (hanger notch). Supports QSA (Quick Size Adjustment) dies, allowing for rapid format changes by deactivating specific pins without needing to remove the die. Ndsdpjz S Un Nsfx Ah Sjc Compatible with two-part dies—a single tool can be used for both standard document perforation (without a thumb-cut) and calendar perforation (with a thumb-cut; in the latter case, the maximum perforation width is 465 mm). Requires a 3-phase power supply. Weight: 120 kg.

Condition: good (used), mileage: 132,047 km, power: 110 kW (149.56 HP), first registration: 05/2022, fuel type: diesel, tire size: 205/75R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, number of seats: 3, total length: 7,050 mm, total width: 2,200 mm, total height: 3,050 mm, loading space length: 4,240 mm, loading space width: 2,090 mm, loading space height: 2,090 mm, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, tail-lift, traction control, = Additional Options and Accessories = - Halogen lamp - None - Tail lift - Manual - Radio/cassette - Reversing camera - Fabric = Notes = Configuration: 4x2, twin tires, payload: 605 kg, unladen weight: 2895 kg, gross vehicle weight: 3500 kg, cab type: single cab, cruise control, air conditioning, number of airbags: 1, auxiliary heater, parking assist: None, electric windows, radio/cassette, Carplay, color: white, reversing camera, lighting type: halogen lamp, climate control, Bluetooth, engine power: 110 kW (148 hp), number of cylinders: 4, engine displacement: 1950 cc, fuel: diesel, Euro: 6, drive technology: timing chain, transmission type: manual, gears: 6, power steering, ABS, ASR, starter battery, body type: additionally extended, roof rack: None, rear closure: tail lift, central locking, number of seats: 3, seat arrangement: 1+2, seat cover: fabric, seat adjustment: manual, tail lift, tail lift design: tailgate, load capacity of the tail lift: 750 kg, tail lift manufacturer: Dhollandia, tail lift material: aluminum, tail lift size: 216x159, ac camera EURO6 cruisecontrol 3 seats carplay, spare wheel, tire type: all-season tires = Additional Information = Axle configuration Tire size: 205/75R16 Brakes: disc brakes Suspension: leaf spring suspension Ndjdpozyktxsfx Ah Soc Axle 1: tire tread depth left: 4 mm; tire tread depth right: 6 mm Axle 2: twin tires; tire tread depth left inner: 4 mm; tire tread depth left outer: 4 mm; tire tread depth right inner: 3 mm; tire tread depth right outer: 4 mm Weights Unladen weight: 2,895 kg Payload: 605 kg GVW: 3,500 kg Functional Tail lift: Dhollandia, tailgate, 750 kg Height of loading area: 96 cm Maintenance APK (technical inspection): valid until 06.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €465 per month (delivery van, 72 months); ask for further information and conditions Identification License plate: VVN-96-Z

Condition: used, Year of construction: 2020, turning diameter 380 mm turning length 511 mm control Mazatrol SmoothG turning diameter over slide 276 mm max. swing diameter over bed 675 mm Standard machining diameter 276 mm bar material dia. 65 mm x-axis 234 mm rapid traverse X-axis 30 m/min z-axis 625 mm rapid traverse Z-axis 33 m/min turning speeds 35 - 5000 U/min spindle nose A2-6 spindle bore 76 mm Motor output (40%ED) 26 KW 22 KW Max. Torque 465 Nm turning speeds 6000 U/min Main drive power 11 KW Max. Torque 90 Nm Milling spindle speeds ( driven tools) 35-6000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20x2,5 Switching time one turret station ca. 0,20 sec coolant tank 180 l connected load 46,2 kW weight of the machine ca. 5,9 t dimensions of the machine ca. 2,7 x 1,9 x 1,9 m incl. the following accessories: - Signal light (3-colour LED), rectangular - High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min, pressure (at pump) 5 bar. - Additional coolant nozzle main spindle - Preparation for oil mist extraction electrical/mechanical flange 98mm - Preparation for bar feed - Robot interface (Advance/Profibus) - Chip conveyor with low ejection height - Overload monitoring system - Drilling cycle with torque-dependent chip breaking - Preliminary use of a hollow clamping cylinder on counter spindle - Hollow clamping device incl. draw tube + cylinder - Clamping chuck Hainbuch Spanntop Nova Axfix mini size 52 - Chuck Hainbuch Spanntop Nova Axfix special mini size 52 - 2 x collets - Changing device for collet chuck STANDARD ACCESSORIES Automatic on/off and warm-up function Air blowing device on the chuck on the counter spindle Use of linear systems with guide carriage USB connection (1 connection) Set of manuals in electronic form on CD C-axis main spindle Input accuracy 0.0001° Spindle positioning counter spindle without C-axis Input accuracy 0.001° Tool turret with 12 stations VDI, Operator door with locking switch Double foot switch for both main and counter spindle Hydraulic pressure interlock Fully enclosed work area Work area lighting Safety precautions in accordance with global standards High-performance coolant system (520W) Flow rate max. 11.5 l/min. Complete coolant system Automatic opening/closing of the chuck jaws Automatic tool eye Absolute positioning system Preparation for chip conveyor (lateral) Synchronisation of main and counter spindle Synchronised tapping with milling spindle Relocation Detector Mazatrol SmoothG control 19" LCD colour screen (touch screen) User macro (600 variables) EIA/ISO input function Optional stop (optional stop) Tool path check in the background Thread cutting function (G33) Ndsdetugggepfx Ah Sjc Polar coordinate input (EIA) Drawing data direct input function Interface for LAN SD memory card I/F - Second-hand machine without warranty - All dimensions, weights and performance specifications are non-binding

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, KUKA KR 240-2 2000 robot, serial number 910465, industrial robot including control cabinet 52697. The KUKA KR 240-2 robot is a 6-axis robot arm with a payload of 240 kg and a reach of 2700 mm. Manufacturing applications include palletizing. Common applications of the KUKA KR 240-2 include: additive manufacturing, assembly, dispensing, polishing, material handling, palletizing, and remote TCP. Specification: Manufacturer: KUKA Model: KR 240-2 2000 Type: Robot arm Axes: 6 Payload: 240 kg Reach: 2700 mm Repeatability: 0.06 mm Nedpfx Aszmtabjh Sodc Weight: 1267 kg Serial number: 910465 Control cabinet: 52697 Year of manufacture: 01/2008 Used item – shows normal signs of wear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries on request – please specify country, city, and postal code. Freight costs on request – please specify the delivery address.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 14,768 h, load capacity: 6,000 kg, lifting height: 7,550 mm, free lift: 2,450 mm, fuel type: electric, mast type: triplex, construction height: 3,490 mm, fork carriage width: 1,520 mm, fork length: 1,600 mm, empty load weight: 13,174 kg, total length: 5,050 mm, drive type: Elektro, construction width: 2,400 mm, Electric Sideload Forklift Load Center: 800 mm Fork Width: 200 mm Fork Thickness: 60 mm Mast Type: Triplex Condition: Ready for operation and fully functional Technical Condition: Very good Front Tires Type: Pneumatic Front Tire Size: 355/65-15 Rear Tires Type: Pneumatic Rear Tire Size: 355/65-15 Battery Voltage: 120V Battery Capacity: 930Ah Battery Manufacturer: ` Battery Year: 2021 Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in stock at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Leasing and financing at attractive rates are always possible. We are also happy to purchase your used equipment outright, even if you do not acquire a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice about this EGX60/16/75TR. P.S.: Our in-house forklift master workshop specializes in repair, overhaul, refurbishment, and custom builds for forklifts from 8 tons upwards. We can also offer your vehicle for commission sale at our premises. Fork Positioning System, 1x NIVO Fork; Fork carriage tilt; Fork positioner opening range: 465 / 1460 mm Ndjdpfxjz Ev U Aj Ah Sec Heater, Full Cabin, Full Free Lift, Platform height: 1050 mm

Condition: used, Year of construction: 2003, Used for the production of door liners by thermoforming. Year of manufacture: 2003 General Maximum roll diameter: 1200 mm Maximum roll width: 850 mm Minimum roll width: 570 mm Ndodszumnzopfx Ah Ssc Sheet loading height: 1750 mm Sheet feeding height: 1750 mm Discharge height of thermoformed product: 1750 mm Machine overall dimensions: See layout drawing Roll Unwinding Station Sheet loading: Manual Roll change: Automatic (pneumatic) Sheet pulling: Motorized Heating Station Format change: Motorized Format change stroke length: 500 mm Oven emptying in emergency: Automatic (pneumatic) Upper panel radiators: 134 × 300 W + 45 × 600 W Upper panel radiator power: 67,200 W Lower panel radiators: 112 × 600 W Lower panel radiator power: 67,200 W Forming Station Moving level of the mold holder Maximum stroke of pneumatic cylinders: 750 mm Closing force of pneumatic cylinders: 687.5 daN × 4 Clamping Ring Maximum stroke of pneumatic cylinders: 200 mm Closing force of pneumatic cylinders at 6 bar: 735 daN × 2 Pre-Stretching / Cooling Dome for Thermoformed Product Maximum stroke of pneumatic cylinders: 200 mm Closing force of pneumatic cylinders: 687.5 daN × 2 Electric fan power: 0.55 kW × 4 Vacuum System Pump capacity: 240 m³/h × 2 Pump motor power: 5.5 kW × 2 Tank capacity: 1200 L × 2 Pneumatic System Operating pressure: 6 bar (±10%) Air intake connection: Water System Operating pressure: 2.5 bar (±10%) Water intake (flow to chiller, closed-loop connection): DN ½" Temperature: 15°C (±10%) Electrical System Three-phase electrical voltage + neutral + earth: 400 V (+10% / -6%) Frequency: 50 Hz Installed power: 280 kW Current: 465 A Roll feed thermoforming machine currently used in the manufacture of refrigerator door liners. Thermoformer comprises: Roll Unwinding Station. Heating Station - Upper and lower pre-heaters and heating elements. Forming Station - Table closing force of daNx2: 735. Clamping Ring. Pre-Stretching / Cooling Dome. Vacuum System. Pneumatic System. Full workshop manuals. Machine footprint of approximately 10m x 3 m x 5m.