Used Pot Belt Drilling Machine for sale (69,740)

Condition: ready for operation (used), WMW Pillar Drilling Machine IIK 20 -Drilling capacity: 20 mm -Spindle speeds: 95 / 150 / 190 / 300 / 380 / 600 / 760 / 1200 rpm -Number of speeds: 8 -Gear shifting via 2 shift levers (A/B) -Manual feed Cedpfx Asztfdfokqerf -Right/left rotation -Coolant system -Machine light -Height-adjustable and swiveling drilling table with T-slots -Solid cast iron construction -Three-phase motor Dimensions: L x W x H 0.9 x 0.8 x 1.7 meters / Weight 420 kg

Condition: ready for operation (used), ERD Column Drilling Machine, Type B35/40 -Manufacturer: Ing. Ewald Riens, Junior, Bodenburg near Hildesheim -Machine type: ERD B35/40 -Design: Column drilling machine with gear drive -Drilling capacity in steel: up to 50 mm -Spindle mount: MK 4 (Morse taper 4) -Quill stroke: 190 mm -Overhang (spindle to column): 325 mm -Column diameter: 140 mm -Table size: approx. 565 × 565 mm -Table adjustment: Height adjustable, rotatable (360°) -Spindle speeds: 6-stage, manual via belt / lever - 670 / 470 / 295 / 210 / 150 / 90 RPM -Note on speed change: Only switch speeds when the spindle is coasting down. -Feed types: Manual and automatic feed -Feed speeds: 0.1 / 0.2 / 0.3 mm per spindle revolution (switchable during operation) -Motor power: 2.2 kW (three-phase) Credpfx Aksztd Iveqef -Supply voltage: 400 V -Cutting speed table for SS drills for material ST60 available (operating instructions) Dimensions: L x W x H: 0.9 x 0.5 x 2.05 meters / Weight: 800 kg

Condition: ready for operation (used), Danube DR 23 - High-speed radial drilling machine -Drilling capacity / steel approx. 28mm -Overhang approx. 700mm -Morse taper MK 3 -Speed range 70-1550 rpm - gearbox -Feed range 0.075-0.3mm -Drilling depth 130mm -Threading device -Hydraulic clamping -Documentation Dimensions: L x W x H 2 x 1.7 x 1.9 meters / Weight 1900 kg Crodpfx Akjztdz Aeqof

Condition: ready for operation (used), H. Hartkämper coordinate drilling machine with cross table -Drive: 400 V three-phase -Drilling capacity in steel: approx. 16–20 mm -Spindle mount: MK2 / drill chuck B16 Crodeztc A Eepfx Akqef -Speed range: approx. 250–3,000 rpm (multi-stage) -Quill stroke: approx. 80–100 mm -Table size: approx. 1,300 × 600 mm -Travel X: approx. 350–450 mm -Travel Y: approx. 180–250 mm -Base: integrated steel substructure with storage compartments Dimensions: L x W x H 1.4 x 0.9 x 1.5 meters / Weight 350 kg

Condition: ready for operation (used), GILLARDON GR 30/4 – Radial drilling machine -Drilling capacity in steel: Ø 30 mm -Spindle mount: MK 3 -Drilling stroke: 120 mm -Spindle speed: 45–1,850 rpm -Infinitely variable speed control -Drilling depth stop -Analog speed indicator -Drive power per drilling head: 2.2 kW -Operating voltage: 380 V / 50 Hz Cjdozr U H Hspfx Akqjrf -Overhang: 295 mm -Max. distance spindle – table: 550 mm -Table size: approx. 2,000 × 660 mm -Coolant system -Documentation Dimensions: L x W x H 2.0 x 0.7 x 2.0 meters / Weight 2000 kg

Condition: used, Year of construction: 1988, Radial drilling machine Manufacturer: Tai Pin Type: TPR 1230 Year of manufacture: 1988 Drilling capacity in steel: Ø 42 mm Drilling capacity in cast iron: Ø 55 mm Crodpfxoznvibj Akqsf Thread cutting (steel/cast iron): M25 / M38 Overhang (column to spindle center): 330 – 1,230 mm Spindle stock travel: 880 mm Column diameter: 300 mm Tool holder: MK 4 (Morse taper 4) Quill stroke (spindle stroke): 270 mm Spindle speeds: 12 steps, 37 – 1,253 rpm (at 50 Hz) Automatic feeds: 3 steps (0.05 / 0.09 / 0.15 mm/rev) Distance spindle – base plate: 467 – 1,360 mm Outrigger height adjustment: 620 mm 23726

Condition: used, Year of construction: 2011, total width: 1,500 mm, total length: 3,000 mm, total height: 1,750 mm, Colour: White Empty weight: 450 kg - Year: 2011 - Documentation available: No - CE certificate present: No - Serial number: 11060282 - Main motor power [kW]: 1.3 - Table length [mm]: 2000 - Table width [mm]: 520 - Max. drilling stroke [mm]: 60 - Number of spindles [pcs]: 27 - Spindle speed: Manual - Min. spindle speed [rpm]: 2820 - Max. spindle speed [rpm]: 2820 - Distance between spindles [mm]: 30 - Workpiece clamps [pcs]: 10 - Workpiece support/Guide: Traverses - Drills included: Yes - Voltage [V]: 400 Cjdpfjzizqgsx Akqorf - Current consumption [A]: 3 - Fuse [A]: 16 - Power [kW]: 1.5 - Transport dimensions: 3000mm x 1500mm x 1750mm (l x w x h) - Transport weight [kg]: 450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Csdpfxovvi I Re Akqorf

Condition: used, Year of construction: 2002, Drilling capacity: 25 mm, spindle mount: MK 3 Crsdpfx Aevvi Aujkqef Storage location: Nattheim

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Features and technical specifications: - Number of drilling spindles: 21, spaced at 32 mm intervals - Drilling direction: Bottom & end face - Swivel range: 0–90 degrees via handwheel - Pneumatic workpiece clamps: 3 pcs. - Opening: Max. 100 mm in height and max. 640 mm in width - Motor: 1.5 kW - Extraction diameter: 120 mm - Includes a wide range of stops (see pictures) Availability: at short notice Storage location: 63934 Röllbach Crjdpfxozn Ah Ro Akqef

Condition: excellent (used), CATALOGUE NUMBER 8005 TECHNICAL SPECIFICATIONS - Number of spindles: 21 pcs - Distance between the outermost spindles: 640 mm - Distance between spindles: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 870x560 mm - Height to the table surface: 900 mm - Stroke of the feed cylinder: 65 mm - Vertical/horizontal and angled drilling adjustment - Drilling head adjustment, pneumatic - Main motor: 1.5 kW - Dimensions (L/W/H): 1000x1150x1240 mm - Weight: 370 kg ADVANTAGES – 21 spindles – drill bit mounting with quick-release fittings – Vertical, horizontal, and angled drilling – Unpainted – Used drilling machine, very good condition Cjdpszr U Ecefx Akqsrf Net price: 7900 PLN Net price: 1880 EUR, depending on the exchange rate of 4.2 EUR (Prices may change due to significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2006, functionality: fully functional, Table size: 3000 x 1000 mm Drive power: 4.0 kW Belt speed: 8 – 25 m/s Table height adjustment: 0 – 630 mm Belt length: 9000 mm Space requirement: 4750 x 2300 mm Crodpfx Aezlh Nzjkqef Machine height: approx. 2500 mm Compressed air: 6 bar Features: - Two belts for pre- and finish grinding - Triangular guide for the belts, providing unobstructed visibility and freedom of movement - Pneumatic belt tensioning with ball bearings - Adjustable belt speed - Tilting of the belts up to 90° - Belt self-centering - Pneumatically opening belt channels - Manual workpiece movement in 3 axes - Each axis with brake or locking mechanism - Vacuum clamping for the workpieces

Condition: used, Year of construction: 2000, functionality: fully functional, feed length X-axis: 4,000 mm, feed length Y-axis: 1,050 mm, feed length Z-axis: 200 mm, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and Travel Ranges Tool holder: SK 40 Table dimensions: mm 4000 x 800 Number of T-slots: 6 T-slot spacing: mm 140 Distance: - Spindle bottom edge: min. mm 140 - Table top edge: max. mm 740 Boring radius: - min. mm 540 - max. mm 1590 Travel range U-axis: mm 2600 Travel range Y-axis: mm 1050 Quill stroke (Z-axis): mm 200 Column stroke (W-axis): mm 400 Machining Data Drilling performance in solid material: - St 60: mm 40 - GG 22: mm 50 Thread cutting: - St 60: M 36 - GG 22: M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque: Nm max. 250 Constant from: min-1 15 - 200 Feed drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 U-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min 7.5 / 3 Feed rates, infinitely variable: mm/min 5 - 2000 Feed force: N 12000 Accuracy Positional accuracy X, Y axis at 1200 mm: mm ± 0.075 Repeatability X, Y axis: mm ± 0.03 Positional accuracy Z axis: mm ± 0.05 Repeatability Z axis: mm ± 0.03 Positional accuracy W axis: mm ± 0.05 Repeatability W axis: mm ± 0.03 Electrical data Operating voltage / frequency: V / Hz 400 / 50 Control voltage: V 24 Total connected load: kVA 13.0 CNC control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat screen, backlit, easily readable from all sides Position data: Cartesian or polar, dimensions absolute or incremental, Unit of measurement: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technology: yes Machining cycles: Cycles for centering, drilling, threading, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible in each cycle Chip breaking / chip removal: possible in drilling cycle Drilling patterns: Hole pattern, hole circle, matrix Codpfx Akoy Ttrteqerf Basic software: Programming in dialog mode, 38 zero-point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - aligning cast and sintered parts - Angle detection for round parts by probing the reference edges or surfaces Data interfaces Paint finish with signs of use Standard paint finish, two-component textured paint Machine upper part: light grey RAL 7035 Machine lower part: light blue RAL 5012 Documentation Operating and programming manual Electrical wiring diagram Spare parts drawings Test report for mechanics, electrical system and safety devices

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, SHARPENING MACHINE MOD. APE 40 UP TECHNICAL SPECIFICATIONS: Sharpening diameter from 2 to 40 mm Right and left cutting edges from 1 to 12 Drill angle 40°-180° Crjdpfx Akszhplcoqef Horizontal wheel center electric spindle power 0.76 kW Vertical wheel center electric spindle power 0.18 kW Pump motor power 0.06 kW Approximate weight 230 kg Machine dimensions mm 1040 x 750 x 1330

Condition: excellent (used), CATALOGUE NUMBER 7908 TECHNICAL SPECIFICATIONS - Tool diameter, Wescott chuck 0-20mm - Max hole depth 155mm - Max milling length 250mm - Drill unit adjustment front/back, right/left + angle - Table adjustment up/down - Table swivel angle 0-45˚ - Working table dimensions 600x320mm - Four-point head 16-22-25-32mm - Material clamps 2 pcs - Motor power 2.2kW - Dimensions (L/W/H) 1050x800x1250mm - Weight 200kg ADVANTAGES – German-made Codszr I H Topfx Akqorf – Very good condition – Eccentric clamps, 2 pcs – Not repainted – Used drilling machine Net price: 6,500 PLN Net price: 1,550 EUR based on rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7787 TECHNICAL SPECIFICATIONS - Tool diameter: 14mm - Maximum drilling depth: 170mm - Maximum milling length: 180mm - Adjustment of drilling apparatus front/rear - Table adjustment up/down and sideways - Table swivel angle: +/-20˚ - Working table dimensions: 620x280mm - Material clamping - Motor power: 1.5kW - Brake - Dimensions (L/W/H): 1070x660x1250mm - Weight: 300kg ADVANTAGES – Polish production – Very good condition – Used drilling machine Codpezr Iyyjfx Akqerf Net price: 5900 PLN Net price: 1400 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the case of major exchange rate fluctuations, the price may change)

Condition: good (used), Donau DR 32 High-Speed ​​Radial Drilling Machine A high-precision, robust high-speed radial drilling machine valued for its reliability in mechanical engineering and industrial manufacturing. Thanks to its swiveling arm, it allows for the quick and flexible positioning of the drill head over the workpiece. Technical Specifications Drilling capacity: Max. 32 mm in steel. Tool holder: MT 4 (Morse Taper). Speed ​​range: Approx. 41 to 1,800 rpm. Quill stroke: 190 mm to 200 mm. Reach: Flexibly adjustable from approx. 240 mm to 850 mm. Table size: 1,200 x 600 mm. Typical Features Tapping function: Integrated automatic system for thread cutting (e.g., up to M26 in steel). Crjdpfxjznkgns Akqof Feed rates: Automatic quill feed with multiple settings. Coolant system: Integrated pump and coolant channel directly on the work table. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: good (used), Donau DR 40 Z High-Speed ​​Radial Drilling Machine The Donau DR 40 Z is a powerful, conventional high-speed radial drilling machine designed for trade and industrial applications. It is characterized by its high flexibility and a swiveling, extendable arm, enabling fast and precise machining of workpieces. Technical Specifications Drilling capacity: Up to 40 mm in steel and 50 mm in cast iron. Tapping capacity: Max. M33 in steel and M45 in cast iron. Tool holder: MT 4 (Morse Taper 4). Spindle stroke: 200 mm. Reach: Variable from 320 mm to 1140 mm. Workpiece height: Max. approx. 700 mm. Table size: 1200 x 750 mm. Speed ​​range: 45 to 2240 rpm. Csdpfx Aoznkd Tekqsrf Feed rate: 0.075 to 0.6 m/min. Drive power: Approx. 6 kW. Weight: Approx. 1.8 to 2.0 tonnes. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: good (used), Donau Danuflex-128 High-Speed ​​Radial Drilling Machine A manual high-speed radial drilling machine from the renowned German manufacturer DONAU Werkzeugmaschinen. This class of machine is characterized by an extremely flexible, smooth-moving swivel system and is primarily used in tool and fixture making, as well as in single-part and small-batch production. Codpfx Akszni T Hsqerf Technical Specifications Tool holder: MT4 (Morse Taper 4) Clamping table: 500 x 1055 mm Maximum reach: 1120 mm Spindle stroke: 160 mm Column diameter: Ø 150 mm Speed ​​range: 45 – 2240 rpm (electrically selectable steps) Feed range: 0.075 – 0.3 mm/rev Motor power: 1.5 / 2.2 kW Total weight: approx. 1,800 kg Additional equipment: Integrated thread-cutting unit "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: good (used), Csepel RF50/1250 Radial Drilling Machine A robust and proven radial drilling machine from the quality manufacturer Csepel (Model RF50/1250). The machine is characterized by its solid construction and is ideally suited for metalworking shops, general workshops, or demanding DIY enthusiasts. Cedozninwepfx Akqorf Technical specifications (according to nameplate): Manufacturer: Csepel (Budapest) Type: RF50 / 1250 Power supply: 3~ (three-phase / 380 V) Frequency: 50 Hz Control voltage: 220 V Operating current: 10 A Required fuse protection: 16 A (slow-blow) You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: used, Dimensions (LxBxH): 280 x 150 x 310 cm Year built: 1988 Overall dimensions LxWxH: 2800x1500x3100 mm Online auction of metalworking and sheet metal processing machines (including a wide selection of SIEGMUND welding and clamping tables and related tools, SAFAN press brakes and SAFAN guillotine shears, MOSMAN YLS-3000 3kW laser welding machine, various FRONIUS, REHM, etc. welding machines, BOMAR, URSUS, ELHA, etc.), remaining stock of sheet metal, materials and inventory, rolling stock, technical equipment, and modern office furniture, released following the recent bankruptcy of Solex Thermal Science (Netherlands) B.V., formerly Mosman Stainless Steel in Haaksbergen, the Netherlands. The online auction opens Thursday 16 July and closes Thursday 3 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Crsdjzm H Ilepfx Akqjf Viewing day is on: - Tuesday 1 September Pickup days are on: - Thursday 10 September - Friday 11 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Year of construction: 2023, condition: used, Dimensions (LxBxH): 110 x 55 x 150 cm Serial number: SMK2023072160K-1 Power: 30W Working area: 110x110mm Overall dimensions LxWxH: 1100x550x1500mm Online auction of metalworking and sheet metal processing machines (including a wide selection of SIEGMUND welding and clamping tables and related tools, SAFAN press brakes and SAFAN guillotine shears, MOSMAN YLS-3000 3kW laser welding machine, various FRONIUS, REHM, etc. welding machines, BOMAR, URSUS, ELHA, etc.), remaining stock of sheet metal, materials and inventory, rolling stock, technical equipment, and modern office furniture, released following the recent bankruptcy of Solex Thermal Science (Netherlands) B.V., formerly Mosman Stainless Steel in Haaksbergen, the Netherlands. The online auction opens Thursday 16 July and closes Thursday 3 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Crjdpfx Akezm H Aceqsf Viewing day is on: - Tuesday 1 September Pickup days are on: - Thursday 10 September - Friday 11 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Second-hand machine Second-hand Ganner Compact 30 row drilling machine Cedpfx Akezk Nwdjqorf Features and technical specifications: 2 drilling beams, each with 15 spindles Pitch 32 mm Drilling unit position adjustment 0–650 mm Distance between rows of drill holes: at least 190 mm Spindle speed 2800 rpm Motor power 2 x 0.75 kW Maximum workpiece clamping height: 70 mm Working height 850 mm Compressed air connection 6 bar Availability: by arrangement Location: Solingen

Condition: repair required (used), Year of construction: 2001, machine/vehicle number: 794, functionality: limited functionality, Boring and sawing machine. From 2001 to 2011: operated in a three-shift system From 2011 onwards: operated in a two-shift system Sawing machine: fully functional Boring machine: functional on 2 out of 3 axes Cedjzrl Eajpfx Akqjrf Machine is currently running.

Condition: used, Year of construction: 1990, taper MK 3 serial number 4131 throat 1000 mm documentation ja clamping hydraulisch kW weight of the machine ca. 2,6 t Crodpfx Akezkbqvsqef