Used Printing Pad for sale (7,363)

Condition: repair required (used), Year of construction: 2009, operating hours: 4,131 h, functionality: limited functionality, number of ink cartridges: 8, color channels: 8, number of print heads: 1, We are selling our Epson printer, which is no longer needed. It has been stored in our warehouse for a few years and was used to print photos in the garage. The print head is likely defective, and it does not recognize the cartridges on the left side, indicating that they are empty, even though they are full. Includes software and automatic paper roll feed. Hfsdpfezi Svmex Airsl I did not connect it to the network, so I can only provide the number of pages printed: 4131 pages. Sold as is, with defects. We didn't use it much because we mostly print on our plotter. Inspection is possible.

Year of construction: 2014, operating hours: 3,100 h, condition: excellent (used), functionality: limited functionality, MYDATA MY500JP Jet Printer 2014 in excellent condition with exceptionally low operating hours (approximately 3,100). Kept and used in a clean environment. Complete system supplied with offline programming PC, MYCAM JP software, 2D Inspection & Repair option, SMT Adhesive option, manual load tables and associated documentation. There are also some spares included which we can bundle into a sale deal for an appropriate price. Visits/Inspection are welcome by appointment. An excellent opportunity to acquire a MY500JP suitable for high-mix, low-to-medium volume SMT production. The machine exhibits an intermittent issue affecting movement on the X-axis during camera positioning. On occasion, a slight jitter or vibration is observed, which can prevent the vision system from reliably locating the PCB fiducial during initial board loading or machine initialisation. The fault is intermittent and does not occur consistently. Most of the time, reloading the PCB allows operation to continue normally. Occasionally, a machine restart is required. The root cause has not been determined, but the issue appears to be associated with the X-axis motion control system. Potential areas for investigation include the servo amplifier (drive), encoder, encoder cable or other associated motion control components. Despite this intermittent behaviour, the machine was used in active production of complex PCB assemblies, including fine-pitch BGA boards, for approximately 12 months prior to being replaced as part of an equipment upgrade. The machine is therefore offered for sale on the understanding that diagnosis and repair of this intermittent fault is outstanding. Hedpfx Aozlx E Tjirjfl Included: MYDATA MY500JP (2014) Approx. 3,100 operating hours MYCAM JP offline programming PC and software 2D Inspection and Repair option SMT Adhesive option Manual loading Technical documentation 4pcs AE04 ejectors Bundle of spare parts Not included: Solder paste Cassette (Holding Assembly), Solder paste, Purge Gel, Filter boxes Conveyors

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 2NT01193, total length: 1,800 mm, total width: 1,000 mm, total height: 1,200 mm, input voltage: 220 V, product width (max.): 330 mm, Equipment: documentation/manual, double-sided, Canon imagePRESS'es C710, C650 and C910 – a reliable and high-performance digital production presses ideal for commercial print shops, in-house print rooms, and professional graphic environments. Features Outstanding image quality Handles a wide range of media types and weights Suitable for brochures, flyers, booklets, marketing materials, and short-run production User-friendly touchscreen interface Condition Fully operational and well maintained, in excellent condition. The machines always serviced by Canon engineer with genuine parts, service history available if required Hodpfourbwxsx Airefl Paper trays standard: 3 x sheet cassettes, Stack Bypass-C1: Multi-purpose tray/ for Long sheet) POD Deck Lite D: (A4/ A3/SRA3) Fiery Print Controller on board x 1 Prisma Sync x 2 Paper Size Length: 148 mm – 487.7 mm Width: 98.4 mm – 330.2 mm Up to 350gsm Duplex Colour Image Scanner with automatic document feeder Power Source 220-240 V Measurements Height 120. With touch control panel 145 Width 180 Depth 100 Machines always serviced by Canon. Discount offered if all 3 machines are bought. Available for inspection OPEN TO OFFERS

Condition: excellent (used), Year of construction: 2020, Ref:11142 . 2020 Horizon Stitchliner Mark III L Stitchliner with A4 Landscape capability. Features: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections Hedpfx Aijzyu Uysrjfl No need to pre-fold Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: 24 station (1 x VAC L600Ha + 3 x VAC L600Hm) 6 station tower suction collators with touch-screen control, double- and miss-sheet control. Accumulator/Folder ACF-40 with double gate-fold to; SPF-40 Saddle stitcher with 2 x Hohner 43/6S stitching heads to; HTS-40 Three knife trimmer Specification:

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: Mini 76 TH, type of input current: AC, input voltage: 400 V, working width: 760 mm, AUTOBOND MINI 76 TH automatic laminator. 2015 Model. Fully refurbished. Hodpfjzpw Izsx Airsfl Max sheet size: 76 x 105cm Min sheet size: SRA4. Speed: 60 m/min. 22 million impressions. Heidelberg Feeder. Tool temp YCU. Jogger delivery. Optional post heat system.

Condition: excellent (used), Year of construction: 2020, Ref:11141. 2020 Horizon Stitchliner Mark III L Stitchliner with A4 Landscape capability. Features: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: 24 station (1 x VAC L600Ha + 3 x VAC L600Hm) 6 station tower suction collators with touch-screen control, double- and miss-sheet control. Accumulator/Folder ACF-40 with double gate-fold to; SPF-40 Saddle stitcher with 2 x Hohner 43/6S stitching heads to; HTS-40 Three knife trimmer Specification: Max sheet size: (Portrait: 356 × 508mm) (Landscape: 267 × 610mm) Min sheet size: 140 × 194mm Hjdpfxszyu Ugs Airjfl Finished booklet size (approx): Max: 352 × 303mm Min: 120 × 85mm Typical formats: A3, A4, A5, B4, B5 Paper weight: Uncoated: 52–350 gsm / Coated: 73–350gsm Max stitch thickness: 5mm Equivalent to ~10mm booklet thickness (~50 sheets of 80gsm) Loop stitching: Max ~3mm stitch thickness Wire size: Typically 0.4 – 0.6mm (No.24–27 range) Trim width: 2 – 25.4mm Max trim thickness: 10mm Max speed: Up to 6,000 booklets/hour A4 landscape: 5,300/hour

Year of construction: 2008, condition: used, Year: 2008 Condition: Functional, dismontled in the warehouse Six-colour sheetfed offset press with coating tower including chambre coater (L) extended unloader (ALV) and carton equipment up to 1,2 mm Technical parameters: - Maximum sheet format: 740x1050 mm - Minimum printing format: 350x500 mm - Maximum speed: 15 000 sheets / hour - Usable materials: cca.60g/m^2 max 1,2mm - High of the stock: - loader 1300 mmm - unloader: 1200 mm - Double diameter impressions and transfer system Basic specification: Loader equipment: - Drive Tronic loader - Sheet splitting with 4 lifting and 6 transporting suction cups (2 of which are long jump suction cups) - Format presetting from the Ergo Tronic controle panel Loading equiment: - Pneumatic traction pads with automatic format adjustment via menu from the Ergo Tronic controle panel Print unit equipment: - Automated plate changing (SAPC) Hfodoy H Hgdepfx Airsl Color wheel equipment: - Color Tronic tinting with 35 zonal blades, each 30mm wide Interpreter equipment: - Powder device WEKO AP 130 Gallery at the machine: - Ergonomic gallery on the device and oparator side Machine equiped: - Equipment for printing cardboard up to 1,2 mm o Manual skid steed loader o Equipment for carton management in printing units o Monitoring the pasage of sheets o Roll down roller shutter for stop-free unloading - Extended unloader / delivery 2600 mm - Full automatic plate changing with pneulatic plate bending device - Machine elevation by 375 mm - ACR Controle(automatic Register) - Connection to the existing Logotronic basic systém (CIP 3) - Connection to the existing Densitronic S console - Color zone status and measured values for Densotronic - Baldwin blankets and impression cylinders washing devices - Combined cooling / temperature controle - Baldwin unit - Grafix dusting with iuonization and connection to the controle panel - Infrared and hot air dryers in delivery

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, production capacity: 6,000 unit/h, The machine is in perfect working order and has been continuously maintained by Quadient. TECHNICAL DETAILS Processing speed max.: 6,000 envelopes/hour Document speed max.: 6,000 documents/hour Maximum monthly volume: 300,000 filled envelopes/month Package thickness max.: 10 mm Package thickness for minimum clearance: under 3 mm Minimum clearance in depth for package thickness under 3 mm: 6 mm Hfsdpfxjzzqabe Airjl Minimum clearance in width for package thickness under 3 mm: 16 mm Package thickness for increased clearance: 3–6 mm Minimum clearance in depth for package thickness 3–6 mm: 12 mm Minimum clearance in width for package thickness 3–6 mm: 19 mm Envelope hopper capacity up to C5 max.: 800 pieces Envelope hopper capacity C4 max.: 500 pieces Envelope weight up to C5 min.: 70 g/m² Envelope weight over C5 min.: 90 g/m² Envelope weight max.: 110 g/m² Refilling possible during operation Envelope width min.: 225.5 mm Envelope width max.: 330 mm Envelope depth min.: 98.5 mm Envelope depth max.: 254 mm Flap length min.: 32 mm Flap length max.: 65 mm Envelope neck depth min.: 10 mm Envelope neck depth max.: 25 mm Minimum opening in the neck area: 70 mm Flap shoulder angle: 50–90° Neck angle: 5–20° MACHINE DETAILS Counter reading: 3,617,695 Voltage: 230 V AC Frequency: 50 Hz Fuse for envelope inserting head: 6.3 A Operating temperature: 18–28 °C Relative humidity: 30–80 % EQUIPMENT Tower feeder with 2 stations CIS reading Datamatrix reading Inserter for inserts up to A4 Envelope inserting module Discharge conveyor Conversion with C4 float switch Sealing with distilled water possible Matching base cabinet

Condition: good (used), Eurotecnica 384 Perfect Binder 100% functional, ready to use. Manufactured by Eurotecnica, Italy. Capable of binding books, brochures, pads, prescriptions, etc. A very handy machine, ideal for digital printing. Technical specifications: Hfjdpfxszw N Ups Airjl Maximum format: 325 x 380 mm Spine thickness: 40 mm Cover weight: 300 gsm Production rate: approx. 200 books/h Weight: 150 kg 230V power supply Material detection sensors, adjustable gluer temperature, automatic cover clamp. Spine milling Easy to use Smooth adjustment of glue thickness

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 153-06SP0610, compressed air connection: 8 bar, Textile screen printing machine with 10 stations and 6 printing units (Made in Germany), with only 454,220 prints, and 2 x Digiflash Rutland intermediate dryers. The machine is fully functional, in good condition, and can be inspected in operation until the beginning of October. • 10 aluminum sandwich pallets 420 x 600 mm • 10 aluminum sandwich pallets 320 x 600 mm • Various squeegees • Power requirements: 3 x 400 V, 50 Hz, 16 A • Digital microprocessor control • Operation via touchscreen, text display optionally in various languages • Screen holder from the side • Pneumatic screen clamping • Double indexing and ½ indexing • Control panel on each printing arm • Registration accuracy 0.025 mm • Adjustable cycle speed • Gap setting Optionally, a Rutcure Master 18 drying tunnel can also be purchased, with a chamber length of 260 cm, belt width of 105 cm, and 18 kW, manufactured in 2007. Price: 2,300 euros (negotiable). Hsdsztqy Sjpfx Airefl

Condition: used, Year of construction: 2016, For sale Duplo 746 Cutter creaser. Year 2016 Top Spec with extra optional Modules includes: CPM-04 RTM-04 Current product, fully supported by Duplo offering support, Supply of spare parts and supported! 1 owner from new, Previous client paid 90K new!! Very nice condition. These new cost £90k Plus, Machine is in stock in my warehouse. Inspecting and testing welcome in Tadley Reading. The Duplo DC-746 Cutter Creaser is Duplo’s most powerful and versatile slitter, cutter, and creaser, designed to handle high-volume production with precision and speed. Ideal for applications like business cards, brochures, and intricate direct mail pieces, it streamlines complex finishing tasks in a single pass. With advanced features, including a high-capacity feeder, automated setup for up to 30 jobs, and lightning-fast speeds of up to 50 sheets per minute, the DC-746 ensures maximum productivity. Its enhanced feeding mechanism supports a wide range of paper types, delivering unparalleled accuracy even for digital stocks prone to curl or static. The DC-746 is expandable with optional modules for rotary perforating and cross-perforating, making it a perfect choice for PSPs looking to increase efficiency, reduce manual intervention, and produce premium-quality finished products. Specification and Features Machine Dimensions W 3040mm x D 870mm x H 1730mm (with PC) Automated Set-up From barcode In-feed Paper Size Min: 210mm x 210mm Max: 370mm x 670mm Creases Max. 20 per sheet Cuts Max. 30 cuts per sheet Slits Six (standard) (8 with options fitted) Ideal for Business cards Folded flyers Hfjdpfx Aezx Htfoirsl Tickets Perforated vouvhers

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, type of input current: three-phase, nozzle diameter: 1 mm, Best large scale 3d printer we have ever purchased and has run 4 years without missing a beat, Super reliable with zero failed prints. Hsdpfx Asvblu Dsirofl New nozzle and new print bed just installed, ready for new owner.

Condition: good (used), functionality: fully functional, machine/vehicle number: A4EX021000228, number of ink cartridges: 2, color channels: 1, number of print heads: 2, resolution (max.): 1,200 dpi, paper weight (min.): 40 g/m², paper weight (max.): 350 g/m², paper width (min.): 35 mm, paper width (max.): 324 mm, paper height (min.): 139 mm, paper height (max.): 483 mm, number of feeding trays: 5, total length: 5,700 mm, total width: 1,000 mm, total height: 1,800 mm, space requirement length: 6,700 mm, space requirement width: 3,000 mm, space requirement height: 2,000 mm, counter reading (black): 14,069,576, year of last overhaul: 2026, input current: 20 A, input voltage: 230 V, Equipment: auto duplex, raster image processor, Due to underutilization, a Konica Minolta bizhub PRESS 2250P, a high-performance printing press with two printing units, is now for sale. It features two roller paper trays and three vacuum paper trays, a re-wetting unit, an inserting unit, and a high-performance stack delivery system, plus two small delivery carts. The two printing units enable duplex printing in a single pass, resulting in almost double the speed compared to machines with a single printing unit. It is currently covered by a comprehensive, active service agreement and has been continuously maintained by Konica Minolta. Hfsdpfsz Aikzex Airel

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 204778-553, total width: 3,200 mm, type of input current: three-phase, input current: 19 A, input voltage: 400 V, Equipment: documentation/manual, For Sale: Klieverik Calendar We are offering our Klieverik calendar machine for sale. The machine is fully operational and available for inspection. Hfedpfxszrgfns Airsl Reliable calendar machine from Klieverik, the Netherlands. Industrial quality with specifications of approximately 10 kW power, 400V, and 50/60 Hz operation. Well-maintained and fully functional.

Condition: ready for operation (used), Year of construction: 1963, Heidelberg Cylinder SBG 57X77 Hsdpfsz Azyzjx Airjfl

Condition: like new (used), Year of construction: 2014, operating hours: 100 h, Used ProJet SD6000 3D printing machine using stereolithographic technology. The machine has had extremely low hours usage during its life so far, having been installed and minimally utilised from time to time for research projects at the University of Sheffield AMRC research department known as the “Factory of the Future”. Serial # 10311178101 Year 2014 MACHINE CONSTRUCTION & FEATURES The ProJet 6000 HD SLA 3D provides SLA quality in a compact footprint and is a printer which puts the unmatched capabilities of Stereolithography 3D printing technology, fine-tuned for cost-efficiency and unrivalled material availability, into a smaller footprint. 3D Printed SLA parts with unrivalled accuracy and surface finish. High Flexibility 3D print with fine feature detail in a wide choice of performance engineered materials that match or exceed traditional plastic properties. Easily swap between material modules for flexible use. • Two build platforms • One material delivery cart • Projet TM6000 Print tray • Washing Unit • Curing Unit 3D print with fine feature detail in a wide choice of performance engineered materials that match or exceed traditional plastic properties. Easily swap between material modules for flexible use. Print modes: High Definition, Ultra High Definition Resolution: (HD) 0.125mm, 0.125mm layer. (Ultra-high definition): 0.125mm, 0.10mm layer. Net construction volume: (short) 250 mm x 250 mm x 50 mm (medium) 250 mm x 250 mm x 125 mm, (tall) 250 mm x 250 mm x 250 mm. Accuracy: 0.025 – 0.05 mm per 25.4 mm of part dimension. BENEFITS: Stereolithography technology (SLA) Max build envelope capacity (W x D x H): 250 x 250 x 250 mm (10 x 10 x 10 in). Hfedpfstvfwksx Airol Highest precision and accuracy Exchangeable Material Delivery Modules (MDMs). Utilizing two laser spot sizes per layer – no compromise between speed or feature detail. True line drawing in X and Y to accurately define curves. Industry-leading 3D Sprint software for file preparation and production. Cloud connectivity for predictive and prompt service with 3D Connect.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, overall weight: 1,625 kg, product height (max.): 50 mm, product length (max.): 3,080 mm, product width (max.): 2,500 mm, TECHNICAL DETAILS Print Head Technology: Piezo inkjet technology with variable drop size Drop Size: 6–42 pl Ink Type: UV-curing inks Canon IJC357 or IJC358 Color Channels: 8 Standard Color Configuration: CMYK, White, Varnish, Light Cyan, and Light Magenta Maximum Media Area: max. 308 × 250 cm Maximum Printable Area: max. 309 × 251 cm Maximum Media Thickness: max. 50.8 mm Maximum Media Weight: max. 34 kg/m² Vacuum System: Independent vacuum zones for secure hold without taping Edge-to-edge printing possible RMO Specifications Maximum Roll Width: max. 220 cm Minimum Roll Width: min. 90 cm Maximum Roll Diameter: max. 24 cm Maximum Roll Weight: max. 50 kg Core Diameter: 3 inches Core Diameter approx.: 7.6 cm Speed and Productivity Maximum Throughput: max. 52.8 m²/h Production Mode: approx. 27.0 m²/h Quality Mode: approx. 19.8 m²/h MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 3,830 x 4,660 x 1,300 mm Weight: approx. 1,625 kg Power Supply: 2 × 200–240 V Frequency: 50/60 Hz Fuse Rating: 16 A Compressed Air: 6 bar EQUIPMENT RMO for roll media UV-curing inks Canon IJC357 or IJC358 Hfsdpfxszy Ngdj Airel Independent vacuum zones Edge-to-edge printing function Compressed air connection for cleaning and static control

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, overall weight: 600 kg, plate width: 60 mm, plate length: 80 mm, resolution (max.): 2,540 dpi, TECHNICAL DETAILS Exposure method: Direct laser exposure (computer-to-screen) Resolution: up to 2,540 dpi Maximum screen size: 600 × 800 mm Suitable for: common CTS emulsions Plate width: 60 mm Plate length: 80 mm MACHINE DETAILS Input voltage: 240 V Dimensions & Weight Dimensions (L x W x H): 1,670 x 820 x 930 mm Total weight: 600 kg EQUIPMENT Hfjdpfx Ajzy Intoirol Computer Keyboard Monitor Mouse Machine software with configuration and adjustment options Accessories and maintenance tools

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, resolution (max.): 360 dpi, paper width (min.): 290 mm, paper width (max.): 750 mm, paper height (min.): 360 mm, paper height (max.): 1,200 mm, TECHNICAL DETAILS Production Speed Production speed, UV spot coating: max. 3,123 ISO-B2 sheets/hour Production speed, Evo 75: max. 4,200 ISO-B2 sheets/hour Production speed, Evo 75: max. 2,291 ISO-B1 sheets/hour Production speed, hot foil embossing: max. 2,300 B2 sheets/hour Format and Printing Area Paper width: min. 290 mm Paper width: max. 750 mm Paper height: min. 360 mm Paper height: max. 1,200 mm Sheet format: min. 420 mm × 297 mm Sheet format: max. 750 mm × 1,200 mm Printable width: max. 540 mm or 730 mm Hot foil embossing area: max. 740 mm × 1,190 mm Resolution Resolution max.: 360 dpi Material Thicknesses and Basis Weights Material basis weight: min. 135 g/m² Material basis weight: max. 800 g/m² Material thickness before printing and lamination: min. 150 µm Material thickness before printing and lamination: max. 800 µm Material thickness for hot foil embossing: min. 150 µm Material thickness for hot foil embossing, standard version: max. 600 µm Material thickness for hot foil embossing, optional: max. 800 µm Foil Rolls Foil roll diameter: max. approx. 300 mm Foil roll length: 400–2,000 m Number of foil rolls that can be used simultaneously: max. 5 Hsdpszrfh Isfx Airofl Foil roll width: min. 100 mm Standard core diameter: 1 inch MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,720 x 1,860 x 1,840 mm Weight: approx. 4,524 kg EQUIPMENT iFOIL-L module for hot foil finishing Evo-75 version for sheet formats up to 750 mm × 1,200 mm Holder for up to five foil rolls on one shaft Quick-change core for 1-inch foil rolls

Condition: ready for operation (used), 1 x stitching unit 380 Hodpjyuk S Sofx Airefl 2 x stitching heads HK75Q 1 x Touch screen Navigation control 1 x oblique sheet saddle monitor 1 x remote control inch 4 x section feeders 370 1 x cover folder feeder 1529 1 x three knife trimmer 449 1 x stream delivery 1564 Optional; 2 x loop stitching heads 1 x Rima stacker

Condition: repair required (used), Year of construction: 2018, functionality: not functional, machine/vehicle number: SG65Q11001, Everything is still quiet. Hfsdpfey Siqiex Airjl

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, paper weight (max.): 208 g/m², paper width (max.): 350 mm, paper height (max.): 500 mm, production capacity: 4,500 unit/h, No minimum price – guaranteed sale to the highest bidder! Auction of a brochure production line! TECHNICAL DETAILS Gathering towers Models: Horizon VAC-100a / VAC-100m Number of towers: 2 Stations per tower: 10 Feeder system: Air suction feeder Voltage: 230 V Frequency: 50 Hz Current draw: 10.4 A per section Booklet making and folding module Model: Horizon SPF-200A Voltage: 230 V Frequency: 50/60 Hz Hjdpfx Aiezy Hhxsrofl Current draw: 3.4 / 3.2 A Booklet making heads: 2 Brochure thickness: up to 4.5 mm Functions: Wire stitching and center folding Front trimmer Model: Horizon FC-200A Function: Automatic front trimming Operating mode: Inline operation with Horizon SPF-200A Cutting quality: High-precision cut Stacking unit Model: Horizon ST-40 Voltage: 230 V Frequency: 50 Hz Current draw: 4.7 A Function: Automatic stacking of finished brochures Production capacity: max. 4,500 brochures/h Feeder stations: 10, expandable to max. 60 Sheet format max.: approx. 350 × 500 mm Paper weight: 52–208 g/m² Booklet thickness: max. 2 mm for saddle stitching Processing: Gathering, stitching, folding, and stacking in one system MACHINE DETAILS Production counter: approx. 1,800,000 brochures EQUIPMENT Horizon VAC-100a gathering tower Horizon VAC-100m gathering tower Horizon SPF-200A booklet making and folding module Horizon FC-200A front trimmer Horizon ST-40 stacking unit Data sheets for the individual components of the system, including further detailed technical data, can be found in the appendix.

Condition: used, Year of construction: 2011, machine/vehicle number: 1537111, type of input current: three-phase, input current: 30 A, input voltage: 400 V, EFI VUTEk GS3200 UV roll-to-roll printer, year of construction 2012, including two extension tables. Sold directly by the owner: a Belgian manufacturer of visual communication, founded in 1832 and part of an international group, ISO 9001 and ISO 14001 certified. This printer comes from our own production floor. It is for sale because our focus is shifting towards total solutions in visual communication, not because there is anything wrong with the machine. MACHINE - EFI VUTEk GS3200 UV printer - Printing width up to 3.2 m - Year of construction 2012 - Supplied with 2 extension tables CONDITION Used, from our own production. Sold as seen, without factory warranty. We will tell you the exact condition and answer every technical question before you decide. Additional photos and technical details available on request. PRACTICAL - Ex works, collection in Olen, Belgium - Dismantling, transport and installation can be arranged at day rate - Business sale with invoice Hfodpfxjzvu Nie Airol - Payment before collection Get in touch through this listing for additional photos, exact specifications or a viewing appointment.

Condition: good (used), FKS PrintBind KB 2000 Book Binder This machine is 100% functional and ready to use. Manufactured by FKS Hamburg, Germany. Capable of binding books, brochures, pads, prescriptions, etc. A very handy machine, ideal for digital printing. Hfedpfx Aijzt H Npjrel The machine has a convenient base and a built-in compressor. Technical specifications: Maximum format: 320 x 310 mm Spine thickness: 60 mm Capacity: approx. 320 books/h Weight: 186 kg 230V power supply Material detection sensors Automatic cover detection and automatic cover clamp Spine milling Simple operation via LCD panel Adjustable cover clamping force Infinitely variable glue thickness adjustment Includes user manual and compressor.

Condition: like new (used), Year of construction: 2024, operating hours: 260 h, functionality: fully functional, cutting width (max.): 530 mm, cutting length (max.): 750 mm, total width: 2,000 mm, input current: 32 A, total height: 2,400 mm, working width: 510 mm, total length: 6,100 mm, input voltage: 400 V, space requirement height: 3,000 mm, space requirement length: 7,500 mm, space requirement width: 2,500 mm, Equipment: documentation/manual, MOTIONCUTTER® 530 – Fully Loaded 450W Digital Laser Finishing System Installed December 2024 | Only 260 Operating Hours | As-New Condition Available immediately in the UK. This is a fully equipped MOTIONCUTTER® 530 high-speed digital laser system with Automation Suite, Position Sensor, Waste Separation and Shingling Belt — essentially the complete production configuration originally supplied fully installed and trained at approx. €317,000 Installed December 2024. Only 260 total operating hours since new. This machine is barely run-in. What You’re Getting Core Machine 450W CO₂ sealed-off laser (600W guaranteed output) 510 x 510 mm working area Up to 18,000 mm/s deflection speed ±0.2 mm dynamic tolerance 20,000 hour expected laser lifetime Mistral 530 pile feeder 80–500 gsm Sheet size up to 530 x 750 mm (extendable to 1000 mm) Conveyor System Patented metal mesh belt 0–45 m/min speed Integrated cleaning station Fully Loaded Options Included ✅ Automation Suite Barcode job recognition Automated job handling Workflow XML integration 100% production control on every sheet ✅ Position Sensor On-the-fly X/Y correction to printed mark Critical for precision packaging alignment ✅ Manual Waste Separation Mechanical stripping of finished product from waste ✅ Shingling Belt High-capacity delivery system Software-controlled separation of jobs This is the configuration serious packaging converters buy. Capabilities Cut | Filigree Cut | Kiss Cut Crease | Micro Perforate | Engrave Hedpfx Aeyk Ip Teirofl Variable Data Finishing NAMECUT® Personalisation from CSV All in one pass. No tooling. No dies. Ideal For Folding carton short runs Cartonboard packaging Personalised packaging Luxury packaging prototypes High-value sheet finishing Indigo / sheet-fed digital press finishing If you’re currently outsourcing die-cutting for short runs, this replaces that dependency overnight. Condition Installed December 2024 Only 260 hours total runtime Clean production environment Fully operational Available for inspection & test runs in the UK Reason for sale: strategic production shift. Why This Is Attractive Skip 8–10 week factory lead time Skip installation delays Skip international shipping Get a fully proven, calibrated machine Save significant capital vs buying new Serious enquiries only. Available immediately.