Used Quick-Change Tool Post Size D1 With Base for sale (66,809)

Condition: good (used), Tool changer chain, chain magazine, tool changing system, tool magazine -for: max. 60 recordings -Hole: Ø 17 mm Lasdpfxeb A Rzms Ab Neh -Weight: 44 kg

Condition: used, DYEMANSION Type: POWERSHOT C 2.0 This system has never been put into operation. (like new!!) Dyemansion Powershot C blasting cabinet Gentle cleaning of powder-based plastic components DYEMANSION POWERSHOT C 2.0, Year of manufacture: 2021 The industry standard for simple and efficient powder removal Automated powder removal increases your production capacity With the Powershot C, a medium-sized build volume can be depowdered in just ten minutes. The time required for part cleaning and the personnel in your production can be significantly reduced. This increases your efficiency. By investing in automated powder removal with the Powershot C, up to four manual blasting systems can be replaced. Gentle surface treatment thanks to intelligent hardware functions The blasting cabinet of our Powershot C is equipped with a rotating basket and lined with stainless steel. Different blasting nozzles and ionization ensure reproducible results. A basket with a soft, replaceable lining protects the parts from damage during the process. Two simultaneously operating blasting nozzles are arranged perpendicular to the rotating basket and the parts contained within. This configuration guarantees efficient powder removal. High user comfort with improved ergonomics and process control Experience a new level of process control with a touchscreen and integrated control panel. The Powershot C is operated via a user-friendly interface and pre-installed programs can be started. Individual programs can be easily configured and saved. The user-centered design makes everything easily accessible and safe to operate. Continuous monitoring enables an efficient and reproducible process. Technical data: POWERSHOT C Lodpfx Abjzgr T To Noah AUTOMATION Individual programming, control and monitoring of process parameters via control panel and touchscreen. PERFORMANCE: Cycle time: Variable from 1 to 40 minutes, typical cycle time 3 to 10 minutes Capacity per cycle: Up to 3/4 EOS P396, 1x HP Jet Fusion 4200/5200 or almost 1.5x full Stratasys H350 build volume Effective volume of the basket 26 liters DIMENSIONS: System (L x W x H) 1700mm x 1310mm x 2030mm Recommended space required in operation (L x W x H) 2500mm x 2915mm x 2300mm WEIGHT: System 480 kg Power: 1kW Requirements 3x400V > 1kW 50Hz 2.5A COMPRESSED AIR: Consumption Minimum: 1.4 m³/min at 2.2 bar Maximum: 1.8 m³/min at 5 bar NOISE EMISSION: Sound level < 80dB(A) Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions for you by telephone.

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks Leder U Sfgopfx Ab Nsah -Top jaws: Base jaws for key bar chucks, helical toothed -Jaw width: 22 mm -Dimensions: see photo technical drawing -Number: 6 sets of base jaws available -Price: per set -Total dimensions: 90/65/H35 mm / 90/67/H35 mm/ 90/70/H45 mm with screws -Total weight: 1.1 kg/set

Condition: good (used), Tool changer chain, chain magazine, tool changing system, tool magazine Lasdpfx Ajb A Nu Tob Neh -comes from a MAHO CNC machining center, type: MC 600 -for: max. 48 recordings -Recording: SK40 -Dimensions: 1630/H450 mm -Empty weight: 325 kg

Condition: good (used), Tool changer chain, chain magazine, tool changing system, tool magazine -Manufacturer: Mikron, tool changer from CNC machining center Mikron UME 600 -for: max. 22 shots Ledjrb E E Nopfx Ab Neah -Intake: SK40 -Dimensions: 1200/1150/H860 mm -Transport weight: 294 kg

Condition: used, Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, milling holder, quick-change adapter, collet chuck, reducing sleeves, clip-on holder -Quick change chuck: taper: MK2 / 26 mm -Measurements: see photos -Dimensions: Ø 52 x 146 mm Ljdpfx Aehh Tlbjb Noah -Weight: 0.7 kg

Condition: used, Tool changer chain, chain magazine, tool changing system, tool magazine Lsdpfjq Tvp Usx Ab Noah -Manufacturer: MAHO, Tool changer from CNC machining center MAHO MH 800C -for: max. 24 shots -Recording: SK -Dimensions: 1200/410/H480 mm -Town weight: 106 kg

Condition: good (used), Quick-change chuck, quick-change holder, quick-change head, keyless drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, clip-on holder -Quick change chuck: Mounting: MK3 / 32 mm -Dimensions: see photos -Quantity: 14 pieces available -Price per piece Lajdpfx Ajrvldxeb Njh -Dimensions: Ø 62 x 175 mm -Weight: 1.2 kg/piece

Condition: new, Six-sided drilling machine Manufacturer: Quick Type: KQ-62Lite New machine Technical data: - Workpiece length: 70 - 2,400 mm - Workpiece thickness: 9 - 60 mm - Workpiece width: 30 - 1,220 mm - Min. processing size: 50 x 70 mm - Transport speed in X: 138 m/min - Transport speed in Y: 90 m/min - Transport speed in Z: 28 m/min Lodpfx Ajzvgndjb Nsah - Machine control: Higerman - Working height: 890 mm - Milling spindle: 2 x 3.5 kW, 18,000 RPM, manual tool change - Drilling unit: Top 9 vertical and 4 horizontal / Bottom 7 vertical - Positioning accuracy: 0.03/1000 - Repeatability: 0.02/1000 - Power consumption: 25.8 kW Optional - Machine including workpiece return Other configurations available upon request.

Condition: good (used), Quick-change chuck, quick-change holder, quick-change head, quick-release drill chuck, milling chuck, quick-change insert, collet chuck, reducing sleeves, mounting bracket -Quick-change chuck: Mount: MK4 / 32 mm Laedpfx Aehh Tktsb Njh -Measurements: see photos -Dimensions: Ø 72 x 210 mm -Weight: 2.1 kg

Condition: excellent (used), Year of construction: 2017, Working width: 3 meters Pressing force: 130 tons Lasdpfxozq A Ipj Ab Neh

Condition: good (used), quick-change chuck, quick-change holder, quick-change head, keyless drill holder, quick-change insert -Quick-change chuck holders: 18 pieces, without: arbor -2x sleeve: MK1 Ljdjwa Invjpfx Ab Nsah -7x sleeve: MK2 -6x sleeve: MK3 -3x sleeve: MK4 -Mounting: Ø 42 mm -Price/Delivery: complete -Transport dimensions: 300/200/H170 mm -Complete weight: 21 kg

Condition: used, Tool changer for lathe, upper support, upper slide, dovetail guide -with four tool holders -Dimension: see photos Ljdpfx Aob Uhq Tsb Nsah -Dimensions: 400/260/H200 mm -Weight: 25.2 kg

Condition: good (used), tool changer for lathe, tool disc turret, turret system, disc turret for lathe -Manufacturer: Sauter, tool changer type 0.5.675.112 from vertical lathe Scherer VDZ 80 DS -Tool turret: Type 0.5.901.012 for max. 12 tools Ljdpjvyg Euofx Ab Noah -Servo motor: Siemens type 1FK7063-2AC74-1SB0 -Individual components: see photos -Dimensions: 560/450/H300 mm -Weight: 117 kg

Condition: good (used), Quick-change chuck, quick-change mount, quick-change head, quick-clamping drill mount, quick-change insert Ljdpfscti A Sex Ab Noah -without: admission -3x Sleeve: MK2 -3x Sleeve: MK3 -4x Sleeve: MK4 -Hole: Ø 42 mm -Price/Sale: complete -Total weight: 11.8 kg

Condition: good (used), Tool changer chain, chain magazine, tool changing system, tool magazine -The tool changer comes from CNC machining center make: Hitachi Seiki type: HC400 -Tool changer for: Hitachi Seiki type HC400, other spare parts available. -complete with: gripper arm and drive -Tool changing positions: 80 Lsdpfodtcrqex Ab Nsah -Intake: SK40 -Dimensions: 2270/630/H1725 mm -Weight: 860 kg

Condition: used, Year of construction: 2006, Used Machine Year of Manufacture: 2006 Features and Technical Specifications - Motor power: 4 kW/400 V - Saw blade swivels on both sides from -46° to 46°—a total swivel range of 92° for flexible angle cuts against the rip fence and crosscut fence - Maximum cutting height: 72 mm - Saw blade diameter: 250–315 mm - Saw blade speed: 5,000 rpm - Cutting width: 1,250 mm - Sliding table length: 3,300 mm - Touchscreen control with an eye-level control panel - Electric height and tilt adjustment of the saw blade - Intuitive operating menus with step-by-step guidance for complex operations - Integrated calculator and special functions for angle cuts and chamfering - Tool management for up to ten tools, enabling dimensionally accurate setup without the need for re-referencing after a saw blade change - Keyless “VLock” quick-change saw blade system for fast tool changes Laedpfx Ao Advffeb Njh - Precision sliding table with interchangeable table lip and sturdy hollow-section profiles, lockable in any position - Ball-bearing-mounted rip fence with adjustment via handwheel and digital display - Length stop with smooth-running stop carriage and fine adjustment - Splitting wedge guard for a clear view of the saw blade and workpiece - Dust extraction port on machine stand: 120 mm - Dust extraction port on guard: 60 mm - T74 parallelogram cross table - DIN A4 guide holder - T74 length stop, similar to the above, with continuous stop surface and two hinged stop elements - CE standard - Weight: approx. 1,250 kg

Condition: good (used), Year of construction: 2018, operating hours: 3,869 h, load capacity: 1,400 kg, lifting height: 2,350 mm, fuel type: electric, mast type: duplex, construction height: 2,000 mm, Options: VERY unique WIDE TRACK version equipped with PALLET exchanger!! = Spreader / Rotator / Clamp (Range from 560 to 1700 mm) – Proportional lift & lower valves – Width between support legs 1280 MM!! Ljdpfx Abjzuudke Njah

Year of construction: 2017, condition: excellent (used), REF: MM6476 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Ljdpfx Ajzrg T Eeb Neah Specification: Model of inline heat sealer - Eclipse SL4. Serial number - EC34-MC-00100. Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Condition: good (used), Tool changer for lathe, tool disc turret, turret system, disc turret for lathe Lodpfxswvh D Ao Ab Nsah -Manufacturer: Swedturn, Type ST12 CNC 300 tool changer -Tool turret: for max. 12 tools -Tool holder: Ø 60 mm -Individual components: see photos -Dimensions: 565/470/H565 mm -Weight: 319 kg

Condition: used, control MAZATROL CAM T-2 Max. swing diameter 440 mm Standard machining diameter 150 mm max. workpiece length 507 mm Laedpfx Ae Aa A Ryeb Noh x-axis 155 mm z-axis 540 mm spindle tunring speed 10 - 2.600 U/min Drive power (30 min) 7,5 kW Drive power (continuous operation) 5,5 kW spindle bore 56 mm spindle taper A2-6 number of tool places 8 Pos. Tool size 20 x 20 x 150 mm dimensions 2.550 x 1.440 x 1.720 mm weight approx. 2.800 kg Condition: used The machine does not have a chip conveyor! Accessories, tools, and clamping devices shown are included in the scope of delivery only if this is explicitly stated in the additional information. Technical data and specifications are subject to change and errors; subject to prior sale!

Condition: not inspected (used), Please see technical details on photo. Laodpfxshvzxze Ab Nsh

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Operating hours: approx. 22,800 h Laser on: approx. 40,100 h Ledpeyyygkefx Ab Njah Voltage: 400 V Frequency: 50 Hz Power: 3,200 W

Condition: used, 4-axis CNC milling machine Lsdpfx Aszvgmyjb Noah Manufacturer: Quick Type: UA-481 New machine Technical data: 380 V-3-phase Working area: 2100 x 3050 x 400 mm 9 kW HSD/HSK-F-63 spindle NC Studio control 10 linear tool changers Double-layer vacuum table with 6 zones Yaskawa servomotor 2 Becker pumps (250 m³/h) NC Studio control with German language Optionally available at an extra charge: - 10-position rotary tool changer on the gantry - 12-position rotary tool changer on the gantry - 2 pneumatic pressure rollers for multiple part clamping - Vacuum table with T-slot for manual fixing of components Other configurations available upon request.

Condition: new, Year of construction: 2026, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 Ledpfouzv Tzsx Ab Neah guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).