Used Ready Sawmill Section (Stationary) for sale (13,409)

Condition: new, Year of construction: 2025, A sand aggregate production plant is a facility where various types of aggregates (such as sand, gravel, crushed stone, or recycled concrete) are produced for use in construction and other applications. These plants typically include various stages of processing, from raw material extraction to the final product. Here are the key components and processes typically involved in a sand aggregate production plant: 1. Raw Material Extraction: - Quarrying or Mining: Aggregates are often extracted from quarries, mines, or riverbeds. Depending on the type of aggregate, the extraction process may involve drilling, blasting, or dredging. Hedpfx Afsq Ngb Dsnjfi 2. Primary Crushing: - Jaw Crusher or Gyratory Crusher: The extracted raw material is usually transported to the plant and fed into a primary crusher, where large rocks are broken down into smaller pieces. 3. Secondary Crushing: - Cone Crusher or Impact Crusher: The crushed material from the primary crusher may undergo further reduction in size through secondary crushing. 4. Screening: - Vibrating Screens: After crushing, the material is often screened to separate different sizes of aggregates. This process ensures that the final product meets the required specifications. 5. Washing: - Sand Washers: In some cases, especially for sand production, washing is done to remove impurities, clay, and fines from the aggregates, ensuring a cleaner and higher-quality product. 6. Grading and Sorting: - Classifiers or Graders: After washing and screening, the aggregates may go through additional processes to separate them based on size or quality. 7. Stockpiling: - Stockpiles: The final aggregates are usually stockpiled for storage before being transported to construction sites or other end-users. 8. Aggregate Storage and Handling: - Storage Bins or Silos: Larger production plants may have storage facilities, such as bins or silos, to store different types and sizes of aggregates before distribution. 9. Quality Control: - Laboratory Testing: Regular quality control testing is performed on aggregates to ensure they meet specifications for strength, size, gradation, and other properties. 10. Environmental Considerations: - Water Management: Some plants incorporate water management systems to recycle and reuse water used in the washing process, minimizing environmental impact. 11. Transportation: - Conveyors or Trucks: Aggregates are typically transported from the production plant to construction sites by conveyors, trucks, or other means.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 3,000 mm, workpiece height (max.): 30 mm, TECHNICAL DETAILS Axis: 920 mm X-axis: 3,000 mm A-axis: 360° Hjdpfx Aezkt A Rofnjfi Material thickness Z: 12 mm - 30 mm Feed rate: 20 m/min Minimum dimensions (plate): X: 300 mm Y: 120 mm Z: 12 mm Maximum/minimum hole diameter: 3 mm - 35 mm Maximum cutting depth with saw blade: 10 mm MACHINE DETAILS Motor power: 0.75 HP Voltage: 400 V Required extraction capacity: 2,300 m³/h EQUIPMENT 4-position drill chuck Saw blade in the X direction

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 22093, functionality: fully functional, volume flow: 4,000 m³/h, filter area: 24.7 m², total height: 3,420 mm, total length: 2,000 mm, overall weight: 725 kg, TECHNICAL DETAILS Filter area: 24.7 m² Volume flow rate: 4,000 m³/h Negative pressure: 2,110 Pa Suction diameter: 250 mm Compressed air connection: min. 6 bar - max. 8 bar MACHINE DETAILS Connected power: 5 kW Motor power: 4 kW Rated speed: 2,925 rpm Rated operating voltage: 400 V Type of current: Three-phase (3 Ph) Rated current: 9.2 A Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,000 x 3,420 mm Weight: 725 kg Hsdjzktr Eopfx Afnofi EQUIPMENT New filters

Condition: new, Taylor 6/2.5m Clamp Carrier System For Solid Wood Edge / Face Laminating. Hedpfxody Dtro Afnofi A versatile 6 section clamping machine specifically designed for solid wood edge and face laminating, the Clamp Carrier is ideal for producing a variety of components such as panels, table tops, block gluings, joinery sections and stair parts. The patented 'equaliser' clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. As standard the machine is equipped with a pneumatic clamp tightener / loosener, pneumatic component flattener and air motor drive for rotation. On request the machine can be specified with a working width of 3.1m and also with 12 working sections. 2.5m (8.5ft wide) 6 section frame. 36 x 302 type clamp arms with 90mm (3.5") high jaws and 1015mm (40") max. opening. (6 clamps per section). 1 x 80U type swing style pneumatic clamp tightener and component flattener with push button operation. 1 x 80AA pneumatic motor drive rotation. Front rest - manually operated. Pneumatic joy stick control for rotation / forward reverse. CE safety perimeter guards to sides / rear

Condition: good (used), Year of construction: 2006, A versatile 6 section clamping machine specifically designed for solid wood edge and face laminating. The Clamp Carrier is ideal for producing a variety of components such as panels, table tops, block gluings, joinery sections and stair parts. The patented 'equaliser' clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. As standard the machine is equipped with a hydraulic clamp tightener / loosener, pneumatic component flattener and hydraulic rotation. Equipped with: 302 type clamp arms with 915mm (36") max opening and 95mm ( 3.5") high jaws - 2 x 80S heavy duty hydraulic drives for rotation - 1 x 80V semi automatic hydraulic clamp tightener. (Hydraulic pack 3 phase electrics). - 1 x 80D pneumatic component flattener - Pneumatic movement in / out of front rest - CE safety perimeter guards Hedpfx Aeru Evgsfnefi Year - 2006 CE

Condition: used, Year of construction: 1999, I - beam section - flat steel 100 x 15 (d 400) mm I-beam section - upend 60 x 10 (d 500) mm L-beam 50x50x6,0 (d 600) mm round material 35.0 (d 500) mm bar material dia. max. 70 x 1.5 (d 1500) mm square material 50x50x3.0 (d 1400) mm bending speed 8.5 U/min roll diam. toproll 152 / 162 mm bore 40.0 mm voltage 400 V Stroke length 120 mm total power requirement 2.2 kW weight 470 kg range L-W-H 900 x 600 x 1100 mm Hsdpfx Afjzlulvonofi Original price with accessories: approx. 10,000 euros Features: - Two driven rollers (lower rollers) - Manual feed of the upper roller - Horizontal and vertical working positions - Shafts mounted with tapered roller bearings - Lateral, manually adjustable stop rollers - 1 set of standard rollersâ??split - 3 sets of tube rollers - 1 freely movable control unit - Operating instructions

Condition: used, Year of construction: 2005, I - beam section - flat steel 80 x 15 (Ø350) mm I-beam section - upend 50 x 10 (Ø400) mm L-beam 40x40x5 (Ø400) mm tool adaptor Ø 30 Welle mm turning speeds 7.0 U/min tube diameter rund 60x1.5 (Ø1000) mm tube diameter vierk 40x2.9 (Ø1000) mm total power requirement 0.75 kW weight of the machine ca. 160 kg dimensions of the machine ca. 650 x 600 x 1400 mm Features: - Electric-motor-driven ring profile bending machine - Two driven rollers (lower rollers) - Manual adjustment of the upper roller - Includes analog position indicator (mm scale) - Shafts mounted with tapered roller bearings - 2 side guide rollers - Machine base frame Hfodpfx Afszluk Esnei - 1 freely movable control unit * Rollers can run clockwise or counterclockwise - Various rollers included in the scope of delivery

Condition: used, I - beam section - flat steel 120 x 20 (d 750) mm I-beam section - upend 60 x 10 (d 800) mm L-beam 50 x 5 (d 1200) mm bar material - diameter 35.0 (d 800) mm bar material dia. max. 70 x 3.0 (d 1200) mm 50.0 mm diameter of upper rolls 155 mm diameter of lower rolls 155 mm Stroke length 150 mm Rotating speeds 9.0 U/min total power requirement 1.3 kW weight 305 kg range L-W-H 900 x 700 x 1500 mm Features: - Robust electric-motor-driven ring/profile bending machine - Machine base frame with rear shelf - Capable of horizontal and vertical operation Hodpfx Afezlukrjnjfi - Segmented standard rollers (split) - 2 sets of tube rollers, 50 + 60 mm - Manual adjustment of the upper roller - Analog position indicator for the upper rollers (scale) - Manually adjustable side/alignment rollers - Base frame with forklift pockets for easy transport

Condition: good (used), punching pressure 60.0 t punching cross-cut in cmm 31 in 15 mm square edge steel 40.0 mm L-beam 160 x 80 mm flat steel 400 x 16 mm throat 400 mm round bar steel 40.0 mm total power requirement 5.5 kW weight of the machine ca. 1.950 kg dimensions of the machine ca. 1700 x 1050 x 1980 mm good / well-maintained condition (!!) Features: - Stop / support table at the punching station - Support table at the notching station - Flat steel blade, 375 mm long, with four cutting edges, - also for cutting angle iron at 45° - Material support table with stop bar on the flat steel shears - Section steel blade for cutting 90° angle steel as well as round and square steel - Scraper, swiveling - Square notching device with stop table - 2 foot switches and electrical controls - Connector for external engagement Hjdpjzkbnnefx Afnjfi - Integrated hydraulic power unit - Three-phase motor, 400 volts, 50 Hz - Various insert tools such as punches and dies

Year of construction: 2017, condition: excellent (used), Stationary piston compressor with a 500 L tank Air outlet: ¾" Dimensions and weights Length (product) approx.: 2020 mm Width/Depth (product) approx.: 570 mm Hedslczl Ujpfx Afnofi Height (product) approx.: 1340 mm Weight (net) approx.: 245 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Output power: 5.5 kW Input power: 6.52 kW Noise emission Sound pressure level Lp: 83 dB(A) Explanation of sound pressure level: Sound pressure level at a distance of 1 m according to DIN 45635 T 13 Compressor Compression system: HOS Intake capacity approx.: 950 l/min Delivery capacity approx.: 750 l/min Explanation of delivery capacity: at 6 bar working pressure Number of cylinders: 2 Number of compression stages: 2 Compressor speed: 960 min⁻¹ Compressed air tank Maximum pressure: 10 bar Tank capacity: 500 l Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, COMPACT CONCRETE BATCHING PLANT C60 SNG PLUS GENERAL Plant Type : Compact Concrete Plant with Single Shaft Mixer Plant Capacity : 60m³/hour freshly compressed concrete Mixer Capacity : 1500/1000 lt (1m³ Compressed Concrete) Total Motor Power : 85kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. A very low transport cost : ONLY ONE CONTAINER/TRUCK The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. Hfjdpfx Afeflz Hdensi 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 700 Concrete Batching Plants to more than 60 Countries all over the world. * LOW SHIPMENT COST(just ONE 40F-OT container or ONE standart trailer) * QUICK INSTALLATION * EASY AND SIMPLE USE DETAILS: Compacted concrete capacity: 60 m³/h Air Compressor Capacity : 650 lt/min Aggregate Hopper : 4X10 (40 m³ ) Mixer Type : SINGLE Shaft (1 m³). 1500/1000 lt capacity Aggregate Transfer Belt : 800x12.000 mm. Weighbridges: Aggregate/ Cement /Water/ Additives OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: good (used), Year of construction: 2002, machine/vehicle number: 4523, punching force: 80 t, sheet thickness steel (max.): 20 mm, Equipment: CE marking, foot remote control, IMS model HY 80 Hedpfx Ajzkwttofnefi

Condition: ready for operation (used), Item: M-8913-APV Cheese Aging Shelves Cheese maturing shelves" or "cheese aging shelves". Hodpfx Ajtmthnofnsfi These terms refer to the specialized shelving used to store cheese while it ages or matures under controlled conditions. Shelves are made of special hard foodgrade material. Dimension: 1900 X 900 X 1700 They can be stacked.

Condition: used, Year of construction: 2014, Robust, power-operated industrial sectional door with integrated personnel door and transparent sections. Ideal for production halls, warehouses, and logistics buildings. Manufacturer: Promotec Industrietore Model series: Prismatherm Type: 62 Door type: Power-operated industrial sectional door Design: With integrated personnel door Glazing: Several transparent sections Hsdpfxozl Edis Afnofi Year of manufacture: 2014 Product standard: EN 13241-1

Condition: used, High-quality, insulated industrial or garage sectional door from HÖRMANN. The door is in good used condition and is ideal for reuse in warehouses, workshops, or garages. Manufacturer: HÖRMANN Type: RenoMatic 42 Year of manufacture: 2023 Door type: Sectional door Design: Double-skinned steel sectional door Thermal transmittance coefficient: 1.4 W/m²K Wind load class: 3 Hjdpezl D T Aefx Afnefi Water tightness: Class 3 Air permeability: Class 2 Leaf weight: 72.3 kg Available quantity: 4

Condition: used, functionality: fully functional, Year of construction: 2016, Flat shear blades, 520 mm long, with four cutting edges, also for shearing angle iron 45° material support table with gauge stops on the flat shear station section shear knife for shearing angle iron 90° as well as rounds and squares quick-change punching attachment up to 39 mm Ø, for punches and dies Hfodpey Ndt Hofx Afnsi of the blue series or with universal die block for die no. 3 height-adjustable and swing-away stripper with exchangeable plate square notching attachment material support table on the notcher station two two-stage foot pedals and electric control elements on the punch station and notcher station hydraulic low pressure spotter for foot operation connecting sockets for external engagement, e. g. via electrical length stop integrated hydraulic power-pack

Condition: used, Year of construction: 2008, overall weight: 1,250 kg, total width: 1,220 mm, total length: 2,700 mm, total height: 2,245 mm, nominal heat output: 600 kW (815.77 HP), No. 10035 2 units stationary warm air heater / generator Kroll 730 S-300 Used, year of construction 2008 According to our customer / the previous owner, the machines are fully functional and can be viewed on site Heat output QN: 600 kW Rated heat input QB: 652 kW Warm air flow rate VN: 48,300 m³/h Rated pressure DN: 300 Pa Motor: 15.0 kW / 28.6 A CE-compliant Transport dimensions each approx. 2700 x 1220 x 2245 mm LWH Weight each approx. 1250 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Hfsdpfxozlr Uuj Afnei Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: like new (used), functionality: fully functional, Year of construction: 2025, TECHNICAL SPECIFICATIONS • Punching force: 850KN / 85 tons • Punching: Ø40x15mm • Cuts per minute (stroke 20mm): 40 • Throat depth: 500mm • Stroke: 70mm Hedezg Dxbepfx Afnjfi • Cutting of L-shaped profiles at 90º: 120x120x10mm • Flat bars: 450x15mm • Round bars: Ø45mm • Square bars: 40mm • Triangular notching: 130x130x12mm • Bending: 200x12mm • Motor: 9KW • Net weight: 2500Kg

Condition: used, Section steel shears, profile shears, punch, punching machine, hole punch -Pressure force: 29 to -Punching: -Scissors: -to cut: -not: -mechanical release: -div. Punches and dies: -Length stop: -Installation dimensions: 1300/1570/H1900 mm -Transport dimensions: 1300/770/H1900 mm Hsdjf Ek H Uopfx Afnjfi -Weight: 1112 kg

Condition: good (used), roller conveyor, conveyor track, roller conveyor belt, roller conveyor, pallet roller conveyor -Roller conveyor: 45 sections, 39 x 2.39 m / 6 x 2.79 m -Brake roller: Distance every approx. 1.3 m -Total length: approx. 110 m -Roll width: 855 mm -Rollers: Ø 60 mm -Roller spacing: 150 mm, see photos -Dimensions: 2390/955/H90 mm / 2790/955/H90 mm -Price/Delivery: complete -Base: various heights in stock, see ID 35351 to 35358 -Transport dimensions: mm (4 pallets) -Total weight: 3357 kg Hjdov I Rc Tepfx Afnefi

Condition: used, pressure 80.0 t punching cross-cut in cmm 31.0 in 25 mm shear: flat material 500x18 / 300x22 mm L-beam 150 x 12 mm round bar steel 50 + 25 mm square edge steel 50 + 30 mm throat 510 mm blade length 500 mm work height max. ca. 1.100 mm total power requirement 7.5 kW weight of the machine ca. 3200 kg dimensions of the machine ca. 2000 x 1000 x 2100 mm from a maintenance workshop Furnishing: - Robust electro-hydraulic combined profile steel shears - Notcher, hole punch, bar steel knife, profile knife and tin snips - Stop table at the hole punch, with blank holder - Stop table at the notcher - 2x floating footswitches Hjdpoxabi Rsfx Afnofi - Stroke adjustment for fast stroke sequence - 1x PEDDINGHAUS contact length stop: 1.000 mm - Safety devices - Operating instructions in German (PDF)

Condition: used, From € 45,00 now for € 40,50. Now with a 10% discount. Recycled Plastic Shelf Rack 1 Section 915x435x1825 mm – Shelving unit with 5 grid levels This 1-section recycled plastic shelf rack is a sustainable and circular solution for storage in warehouses, workshops, garages, and damp areas. Hjdpfxey R Stwj Afnofi By using recycled material, plastic waste

Condition: used, A used demountable META shelf rack (5270x635x2500 mm) made of galvanized steel is a durable and versatile storage system in various environments, such as warehouses, garages or industrial areas. Hodow Sxvmopfx Afnsfi Galvanized steel offers excellent corrosion resistance, making the storage rack durable and suitable for various environments, including humid

Condition: used, From € 47,50 now for € 42,75. Now with a 10% discount. Recycled Plastic Shelf Rack 1 Section 915x435x1845 mm – Shelving unit with 5 grid shelves – on legs This 1-section recycled plastic shelf rack is a sustainable and circular solution for storage in warehouses, workshops, garages, and damp areas. By using recycled material, Hfedpfxey R Stqo Afnsi

Condition: used, From € 70,00 now for € 63,00. Now with a 10% discount. 1-Section Shelf Unit 1000x400x1600 mm – Warehouse Shelving with 5 Adjustable Levels This 1-section shelf unit is a practical and versatile solution for storing goods in warehouses, workshops, offices, and storage areas. Hfjdpfx Ajy R Stksfnsi Thanks to its compact size and adjustable levels, this