Used Riedel Suction for sale (2,417)

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg Gjdpsy Ehrxjfx An Isug - immediately available -

Condition: used, Year of construction: 1998, OVERVIEW This ABC 4HA-4-LT high-pressure reciprocating air compressor, manufactured in 1998, is designed for the supply of compressed air in PET bottle blowing applications. The compressor is manufactured by ABC – Arizaga, Bastarrica y Cía S.A. from Eibar, Spain. The machine is a 4-stage reciprocating compressor with oil-free cylinder compression design and a nominal pressure of 42 bar. It is belt-driven. The compressor is mounted on a structural steel skid and includes interstage piping, pressure monitoring, cooling water connections, main drive motor, belt-drive safety guard and integrated control cabinet. The machine is equipped with an analog pressure gauge panel showing the final stage, intermediate stages and oil pressure. The control cabinet is fitted with status lamps for temperature, water, oil, thermal relay and dryer fault indications, as well as an hour meter and emergency stop.   TECHNICAL DATA Gjdsziawropfx An Ieug - Manufacturer: ABC – Arizaga, Bastarrica y Cía S.A. - Manufacturer Location: Eibar, Spain - Model / Type: 4HA-4-LT - Machine Type: High-pressure reciprocating air compressor - Year of Manufacture: 1998 - Application: High-pressure compressed air supply for PET bottle blowing - Compression Design: Oil-free cylinder compression - Number of Compression Stages: 4 stages - Nominal Pressure: 42 bar - Regulation Air Pressure: 8 bar - Suction Pressure: Not specified - Flow Rate: approx. 546.9 m³/h - Compressor Speed: 725 rpm - Motor Power: 150 CV / 110 kW - Total Power to Install: 158 HP / 115 kW - Transmission: Belt-driven - Power Voltage: 380 V - Control Voltage: 220 V - Frequency: 50 Hz - Cylinder Diameter, 1st Stage: 250 mm - Cylinder Diameter, 2nd Stage: 160 mm - Cylinder Diameter, 3rd Stage: 105 mm - Cylinder Diameter, 4th Stage: 75 mm - Piston Stroke: 150 mm - Cooling System: Water-cooled - Cooling Water Flow Rate: approx. 6.5 m³/h - Ambient Temperature Range: 0 – 40°C - Cooling Water Temperature Range: 5 – 40°C - Compressor Weight: approx. 2,900 kg - Motor Weight: approx. 830 kg - Complete Equipment Weight: approx. 7,230 kg - Pressure Gauges Observed:Final stage: approx. 42 bar 3rd stage: approx. 16 bar 2nd stage: approx. 6 bar 1st stage: approx. 2 bar Oil pressure: approx. 3.5 bar - Control Cabinet: Integrated electrical control cabinet, marked T2/7 - Operator Elements: Status lamps, analog hour meter and emergency stop - Status Indications: Temperature, water, oil, thermal relay and dryer fault - Safety Equipment: Belt-drive / flywheel safety guard and emergency stop - Construction: Green painted multi-stage compressor on structural steel skid - Additional Equipment Observed: Interstage header pipework, vertical separator / receiver vessel and overhead piping - Certification: CE-marked - Condition: Used, installed in industrial production environment

Condition: new, Year of construction: 2026, TS 300 SD P Bench Grinder with dust extraction, machine stand, emergency stop button, and brake Smooth-running, maintenance-free motor Side-enclosed protective covers Sturdy, adjustable workpiece supports High level of safety thanks to adjustable spark deflectors Suitable for grinding, deburring, and sharpening all types of tools, metal profiles, etc. Motor protection switch and undervoltage release Double-sided spark/eye protection Connection cable with 16 A CEE plug One each of coarse and fine grinding wheels 12-month warranty for single-shift operation - Grinding wheel (mm): 300 x 40 x 51 - Machine dimensions without packaging (mm): 540 x 530 x 1,180 mm - Speed (rpm): 1,250 - Three-phase motor 400 V / 2.2 kW: Operating mode S2-30 min (Short-term operation) - Extractor motor 0.55 kW, suction capacity 350 m³/h - Weight (kg): 90 DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! Guedpfxjr Ez Uws An Ieg ASK FOR A QUOTE!

Condition: excellent (used), functionality: fully functional, Year of manufacture: approx. 2014 Greenline version – Energy-saving (IE2) Conveying medium temperature up to +120°C Multi-purpose use, e.g. for kitchen exhaust or industrial exhaust Double-walled, sound-insulated housing (50 mm rock wool – non-combustible, DIN 4102) Inspection door facilitates maintenance work Voltage/Frequency: 400 V / 3 phase / 50 Hz Power: 3670 Watt Current: 6.16 Amps Speed: 2890 rpm Protection class: IP 55 Motor protection: PTC (thermistor) Gsdox H Ryhepfx An Ieug Max. medium temperature: +120°C Motor type efficiency/controllable: IE2 / frequency inverter controllable (Greenline) Max. air volume flow: 7513 m³/h Motor outside airflow as per DIN 18869-T1: yes Sound pressure level at 4m: 53 dB(A) Housing insulation: Double-walled with 50 mm mineral wool (non-combustible) Housing material: Galvanized sheet steel External dimensions: 770 x 770 x 655 mm (L x W x H) Inlet duct connection (DN): 355 mm Outlet duct connection (DN): 355 mm Weight: 95 kg

Condition: used, Year of construction: 1992, Made in Germany Gjdev D Drmjpfx An Ieug Electrostatic filter Suction capacity: max 2200 m³/h Weight: 150 kg Operating voltage: 400 VAC, 50 Hz, Current consumption: 3.2 A

Condition: new, Year of construction: 2026, Weima Hacker/Shredder WL 8 with Top Equipment - Four-sided segment floor, discharge auger with geared motor, double blade row, log spacer, fast reverse hydraulics with shock valve The single-shaft shredder WL 8 is a proven classic for shredding wood waste of all kinds. It is used thousands of times in wood processing companies worldwide. The high number of these highly sought-after shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures extremely high durability (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display To ensure that the electronics are optimally adapted to the machine, we design, build and wire our control cabinets ourselves. We use only high-quality components – for example, from Siemens or Rittal. Intuitively operated touch interfaces guarantee quick adjustments. Functions such as setting the slide timing or stop ensure a high throughput. The built-in overload protection also prevents damage to the machine. No material bridging thanks to self-cleaning hopper design The hopper performs several tasks. First, the material to be shredded is fed into it – manually, mechanically or via a conveyor belt. The generous opening also makes it easy to fill in very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridging, is decisive for the shredding process. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas springs are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robust due to the extreme stress it is subjected to during the shredding process. To prevent dust or foreign matter from entering its interior, we have separated it from the machine frame. This also makes it very easy to maintain and access. Gjdemhh Idopfx An Ieug Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (RPM): 80 - 125 Power (kW): 22 Number of blades: 54 Available blade sizes (mm): 40 x 40 Particle size (mm): Suction nozzle (mm): 200 Feed opening (mm): 1000 x 1250 Length (mm): 2045 Width (mm): 1740 Height (mm): 1840 Weight (approx. kg): 2200 Screen size: 15/20 Accessories: - 2nd blade row - Log spacer - Four-sided segment floor - Discharge auger with geared motor - Fast reverse hydraulics with shock valve Location: Available in warehouse 54634 Bitburg

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Gjdjqlckpjpfx An Ijug Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Raw air extraction unit ASA 163 With standard chassis Dimensions and weights Chip collection volume: 175 l Nominal outer diameter of suction nozzle inlet: 160 mm Length approx.: 1096 mm Width/Depth approx.: 648 mm Height approx.: 2300 mm Weight approx.: 40 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Gsdshk S S Ejpfx An Isug Filter Filter area: 2.2 m² Noise emission Maximum sound pressure level: 83 dB(A) Volume flow Nominal volume flow: 2200 m³/h For milling, planing, and sawing chips (no dust) Significantly reduced dust content thanks to BIA-tested filter material with a high separation rate Housing parts and impellers made of high-strength special plastic Quick-release fasteners for filters and chip bags for trouble-free maintenance Robust, high-quality design Easy to move thanks to swivel casters Low power consumption Extraction units comply with dust class L Scope of delivery: Unit body with mounted fan unit Filter bag / extraction unit Chip bag / extraction unit without extraction hose

Condition: good (used), functionality: fully functional, We are offering our used sheet piling shear for sale. Guedpfx Anjzxc I Es Isg This machine was developed and built by us in the past for cutting sheet piles to size. The machine is in good working condition and is still in use. However, as we currently have very few projects that require this machine, we have decided to sell it. Optionally, the associated racking system for storing the sheet piles can also be included. The suction cup that is currently attached can also be included. However, the suction cup is not currently functioning properly; the problem is likely in the mechanism. Also, the remaining stock of sheet piles can be taken over upon consultation. If you have any questions or would like more information, please send us a message or call us.

Year of construction: 2017, condition: used, Pos.1 VEN CLEAN Smart dedusting systemCompressed air dedusting for cleaning the workpieces to be painted from dust on profiled workpiece surfaces. Five rotating blowing stars are installed. These remove the dust from the surface. The loosened dust is extracted on both sides by suction shafts. on both sides. An external extraction system is required on site. Technical data: Roller transport length: 2,060 mm Roller pitch: 85 mm Working width: 1,300 mm Total width: 1,800 mm Drive power: 0.25 kW Exhaust air volume: 4,000 m³/h To be provided by the customer Compressed air consumption: 980 Nl/min. Ionisation as nozzle bar, not EX) with compressed air nozzles, Compressed air consumption 840LN/min. Pos. 2 Automatic spray gun VEN SPRAY Comfort- Manufacturer Venjakob - Type. VEN SPRAY Comfort CNC 7000 - Year of construction 2017 - Working height approx. 930mm+-20mm - Working width 1300 mm - Operating side left - Price for overhauled machine Godpfxezv Tcus An Isug - Actual condition, machine not overhauled - Gun drive in duo version - Dry extraction system - Extraction nozzle diameter 500 mm - Exhaust air capacity 7,000 m³/h - Belt conveyor system - Infinitely variable feed speed ~ 2-6 m/min - With belt cleaning system with doctor blade in tungsten carbide design - Gun control, touch screen CNC7000 - Installed colour circles 1 pc. (optionally more possible) - Supply air filter cover - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet, free-standing - Volt, Hz 400 / 50 - Colour RAL 7035 - Location, in stock Voltage fluctuations max. +/- 5 %

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Cefla pallet dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints Guedpozv Tdfofx An Isg - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035

Condition: new, machine/vehicle number: 85163, Attachment: Electro-hydraulic piston diaphragm pump (charging pump / filling pump) NEW! Type: Abel HMD-G-50-500 Identification No.: 85163 Flow rate: 50 m3/h Motor power: 30 kW Motor speed: 1465 rpm Piston diameter: 200 mm Suction-side connection flange: DN 125 PN 16 DIN 2633 Pressure-side connection flange: DN 100 PN 40 DIN 2635 Application: Filter press feeding Suction flow stabilizer: including vacuum breaker 0.5 bar Guedpsd Ey Riefx An Ijg Air feed fitting: on the suction and pressure sides, incl. pressure regulator, solenoid valve, check and throttle valves Other accessories: such as drain valve, pressure gauge, etc. Photo: similar in design The Abel hydraulic diaphragm simplex piston pump in horizontal design is double-acting, slow-running, self-priming and dry-run safe. The pump's flow rate is efficiently controlled by a speed-controlled drive, depending on the delivery pressure, by means of a frequency inverter. We also offer our piston diaphragm high-pressure pumps in a special tunnel construction version. Do you have specific requirements? Please contact us.

Condition: like new (used), Year of construction: 2019, Vacomat 350 XP TWIN The Vacomat 350 XP TWIN is a high-performance dust extraction unit and a true energy-saving marvel among mobile dust extractors. Two frequency-controlled motors (5.5 kW each) ensure that the suction power is adjusted accordingly, especially under highly variable operating conditions. This ensures that only the energy that is actually needed is consumed. This dust extractor handles air volumes of up to 10,000 m³/h and is ideally suited for extracting dust from large CNC machines or entire machining centers. The innovative and highly intelligent control system automates the extraction process in conjunction with the connected machines. Extraction starts automatically as soon as a connected machining center is switched on. If the power requirement is lower, only one fan is started. As soon as several extraction points are in operation, the second fan is automatically switched on. As standard, the filter sleeves are cleaned automatically during operating breaks, as soon as all connected machining centers are switched off. Our patented filter shaking system then ensures gentle cleaning via a pneumatic/mechanical process using a compressed air connection (inlet pressure 6 bar, air consumption per cleaning cycle approx. 11 l). Optionally, and particularly recommended for very high and extremely fine dust concentrations, such as gypsum dust, an efficient pressure pulse cleaning system is available. The cleaning process via the compressed air tank takes place offline, after the extraction operation (NOTE: height then +100 mm and length +350 mm). Godpfozp Edwox An Ieug Our Vacomats are manufactured using a modular system. As standard, the dust and chip mixture is discharged into four dust-tight chip collection containers (4 x 120 l) with durable plastic liners. A negative pressure channel securely holds the foil bags in the collection container. Viewing windows make it easy to check the fill level. Low energy consumption thanks to a modern, high-efficiency motor (IE3) "Made in Germany" and a flow-optimized internal housing with low air resistance. Heat recovery through a recirculation system: The warm exhaust air is filtered and fed back into the workshop. Low noise level: A double-walled filter sleeve housing absorbs the extraction noise directly inside the Vacomat. In addition, the fan housing is soundproof. Approved for indoor installation in the wood dust area - manufactured according to the new DIN EN 16770 standard. Healthy return air: High-quality, specially developed filter materials made of antistatic polyester needle felt filter out 99.9% of dust and chip waste from the air (dust class M for St 1 dust, according to TRGS 553). Increased safety through fire and explosion protection measures according to DIN EN 16770: pressure pulse tested up to 20,000 Pa, automatically activated powder extinguishing system - no water damage! Operational reliability: A pressure gauge continuously monitors the extraction performance. Error messages are displayed by the signal light. Low follow-up costs due to high-quality components and long service life of the filter medium: For example, an extra-large settling chamber ensures an initial separation of coarse chip waste. This prevents the filter sleeves from being additionally loaded with material. Low maintenance effort thanks to the maintenance unit on the motor console and easy access to the inside of the filter. All specifications according to the manufacturer.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 5,797 h, clamping force: 800 kN, screw diameter: 40 mm, total width: 2,042 mm, total height: 1,711 mm, overall weight: 8,200 kg, product length (max.): 4,545 mm, This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a tool installation height range of 200–500 mm and is equipped with a Euromap 67 robot interface. If you are looking to get high-quality injection molding capabilities, consider the Netstal Elion 800-270 machine we have for sale. Contact us for more information. Additional information inclusive Wittmann Primus 16T robotTravel ranges: Z: 1250 mm, Y: 800 mm, X: 590 mm5 kg payloadControl system: Wittmann CNC8, Primus R8.3 softwareR8 Teachbox TouchVacuum circuit with additional 5/2-way valve • Injection Unit: 270 Powermaster with injection speed of up to 450 mm/s • Screw Diameter: 40 mm, type B, 3-zone screw • Nozzle Type: Pneumatically controlled needle valve nozzle with additional heating zone • Minimum Installation Height: 200 mm • Maximum Installation Height: 500 mm • Clamping Force: 800 kN • Minimum Installation Height: 200 mm • Maximum Installation Height: 500 mm Godpfx Asx D Rlpjn Ijug • Hydraulic Unit: Fully integrated hydraulic unit 9 kW with 140 bar operating pressure • Pneumatics: 1 Air valve to 890 Liter, 1 additional Air valve to 890 Liter • Safety Cover Execution: Locked doors, top • Operator Identification: User recognition via PIN • EUROMAP 67: Standard + dynamic retractionInterfaces: Colour feeder, Freely Configurable DIO: 4x Output/2x Input • Tool Monitoring: Available on DFP • Voltage Fluctuation Compensation: UPS presentExtrasSocket box 1:X2510, Cekon, 16A /400V, 3P-N-PE via HSX2511, Cekon, 16A /400V, 3P-N-PE via HSX2512, Cekon, 16A /400V, 3P-N-PE via HSX2513, Cekon, 16A /400V, 3P-N-PE via socket contactor(Function 0060)Sockets for colour dispenser:1X2507 / 1W7145, Schuko 10A / 230V, 1P-N-PE, via HSplus 1X9507 / 1W9507, Schuko 10A / 230V, 1P-N-PE, via HSMount sockets and base housings on bracket 110.180.6902(Function 0060)1X3123, Zone 12 HAN 4A screw-in, power only1X9123, Zone 12 HAN 4A screw-in, sensor only(Function 0110)Pneumatics 1, 1x3/2WV 890L, mounted on DAP, W2008(Function 0470)Pneumatics 9, 1x3/2WV 890L, mounted on BAP, W2016(Function 0470)Cooling water 1:X4051 W9088 Flow measurement B1135 - B1138 (return),Pressure measurement B1211 (flow)X4060 W9260 HAN16E Temperature measurementB0801 (flow), B0832 (return)(Function 0490)Cooling water 2:X4050 W9086 Flow measurement B1147 - B1150 (return),Pressure measurement B1212 (flow)X4059 W9259 HAN16E Temperature measurementB08813 (Flow), B0814 (Return)(Function 0490)Dosing 1C:1x suction conveyor and 1x paint dosing1X2018/1W7146, HAN 4A for paint dosing1X9191/1W9946, HAN 3A for suction conveyormount sockets and base housings on holder 110.180.6902(Function 0550)

Condition: used, mileage: 118,000 km, power: 265 kW (360.30 HP), first registration: 04/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: red, gearing type: mechanical, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, Manufacturer MAN Model TGS 26.360 6x4H?4 Wiedemann Stainless steel / Edelstahl tank Year 2019 Condition Very good Serial Number WMA35SZZ7KM816181 Ref. nr. 1107870 Reg. date: Hk: 360 Km: 118000 Gearbox: Manual (ZF 16 S 222 OD Servo-Shift) Eurotype: 6 Diesel tank: 1 Tank liter: 390 L Rear view camera: ? Air conditioning: ? Cabin type: TGS Radio: ? Refrigerator: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 385 / 65R22,5 - 315 / 80R22,5 - 385 / 65R22,5 Cover% left 40% 40% 80% Guedpfxswqvu Ee An Ijg Front suspension: Springs Suspension rear: Air Toolbox: ? Hydraulic system: ? Total weight: 26.000 Kg Net weight: 17.500 Kg Load capacity 8.500 Kg Manufacturer: Wiedemann Tank capacity sludge tank: 4900 L Tank capacity drainage tank: 8400 L Tank capacity polymer tank: 1700 L Tank capacity reject water tank: 3600 L High pressure pump: Pratisolli KF36 - 120 l/min 120 bar High pressure pump hours: 108 Polymer pump: Allweiler SNP 25.1 - 2.4 m3/h Polymer pump timer: 917 Sludge pump: Allweiler AEB 1F 553 - 30 m3/h Sludge pump hours: 931 Vacuum pump: Samson V15 (KS725) - 850 m3/h Vacuum pump timer: 1454 Remote control: ? Water heater: ? Suction hose 3": 1x30m + 2x15m Flush hose: 1x30m 1/2" + 1x30m 3/4" + 1x8m 1/2"

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Mobile dust extraction unit AL-KO Mobil-Power-Jet 100 for use with woodworking machines. This compact dust extraction system is designed to be mobile and is suitable for extracting wood dust and chips directly at the machine. The rollers allow the unit to be used flexibly in different work areas. Technical data / Features Manufacturer: AL-KO Type: Mobil-Power-Jet 100 Year of manufacture: 2009 Manufacturer’s serial number: 2433338514 Item number: 195 426 Nominal volume flow: 700 m³/h Minimum volume flow: 565 m³/h Suction nozzle: Ø 100 mm Motor power: 0.75 kW Voltage: 230 V / 50 Hz Nominal speed: 2,850 rpm Nominal current: 4.85 A Godpfxezzadcs An Ieug Protection class: IP54 Negative pressure: approx. 1,020 Pa Dust class: M Mobile / can be moved on rollers The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Transportation is possible for an extra charge! Technical data and features may vary. Errors, prior sale and changes are subject to confirmation. All information is provided without guarantee.

Condition: used, functionality: unexamined, For sale is a Leybold RUTA vacuum pump unit in adapter configuration, consisting of a RUVAC WS 501 rotary lobe pump and a TRIVAC D 65 B rotary vane pre-pump. Technical data and markings: - Configuration: RUVAC WS 501 / TRIVAC D 65 B / Adapter - RUVAC catalog number: 11732 - RUVAC nominal pumping speed: 505 m³/h - TRIVAC D 65 B, catalog number 11296 - TRIVAC serial number: 31000491088 - TRIVAC pumping speed: 65 m³/h Gusdezzr Nkepfx An Ijg - Pumping speed of the pump unit at 0.1 mbar: approx. 380 m³/h - Ultimate partial pressure: < 2 × 10⁻⁵ mbar - Installed motor power: approx. 4.4 kW - Connections: DN 63 ISO-K on the suction side, DN 40 ISO-KF on the discharge side - Druschke article number: SGWS501 - Druschke serial/ID number: 11732-ID15931 - RUVAC marking 2003/08; TRIVAC marking CW 31/2011 Visible scope of supply according to the images: - RUVAC WS 501 - TRIVAC D 65 B - Direct adapter - Side filter/separator housing - Connection line, cable, and plug - Base frame with drip tray Used condition with dirt, paint damage, and slight corrosion. The operational condition and achievable vacuum performance were not re-tested after disassembly; therefore, it is sold as untested. A control cabinet or frequency inverter is not shown and is not part of the described scope of supply. Scope of supply according to the images. Price net, EXW Kirkel. Loading and organization of transport are possible for an additional charge and by prior agreement. The transport costs depend on the destination and scope. Sale subject to prior sale.

Condition: used, functionality: fully functional, Year of construction: 2005, type of cooling: water, overall weight: 15,000 kg, total length: 10,000 mm, total width: 4,000 mm, total height: 25,000 mm, year of last overhaul: 2024, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, ITEC AG laser cutting system for circuit boards. The system consists of the following components: ITEC AG cell with granite bed, 3-axis Motoman NX 100 robot, vacuum manipulator RIEDEL L 21/8 TR 3.00 cooling system Gujdpfszyzzyox An Ijg GSW Schwabe AG straightening machine MHR 2.5mm / 1250mm / 7 rollers GSW Schwabe AG coil handling system VRMA 80/76 The circuit boards are fed from the coil (GSW Schwabe AG, MHR 2.5/1250, general overhaul in 2022) into the straightening machine (GSW Schwabe AG, VRMA 80/76). The PDFs with technical data are attached. The laser portal for the TRUMPF TF is mounted on a solid granite bed, which guarantees absolute repeatability. The Motoman robot picks and places components using a vacuum manipulator and camera. The system has been continuously maintained and is in production-ready condition. Before dismantling, the system was cleaned, and all liquids and coolants were evacuated.

Condition: as good as new (ex-display), Year of construction: 2026, SRF Maxi. (Image on the right) 3 m extraction arm Application area Medium amounts of smoke/dust Regular use Benefits Low need for repositioning the extraction hood Contamination-free filter change Safe operation thanks to rotary field detection High cost-effectiveness due to long filter service life Features Safe operation through filter monitoring Extraction hood can be rotated and swiveled 360 degrees Start/stop automatic (optional) Workplace lighting (optional) Technical data Process: 2-stage Filter type: Disposable filter Filter area: approx. 20 m² Separation rate: > 99% Filter material: Polyester fleece Welding fume separation class: W3 Additional filters: Pre-filter (aluminum mesh) Basic data Extraction capacity: max. 1,100 m³/h Diameter of extraction arm: Ø 150 mm Length of extraction arm: 3 m Diameter of suction connection: Ø 150 mm Power connection: 3 x 400 V / 50 Hz Guedpfxodqzcve An Isg Motor power: 1.1 kW Sound pressure level: 70 dB(A) Dimensions (W x D x H): 790 x 815 x 1080 mm Weight: approx. 71 kg / approx. 120 kg

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 0650173822, overall weight: 87 kg, filter area: 10 m², Specification: Operating temperature range: 0 to +50°C Operating voltage: 400V/50Hz Control voltage: 24V DC Connected load: 5 kW Max. blower air volume: 580 m3/h Gujdpfxewq Ryve An Isg Max. achievable negative pressure: 37,500 Pa Max. device air volume: 520 m3/h Minimum air volume: 100 m3/h The Fumator Minivac 500D is a robust and efficient extraction system, specially designed to reliably filter smoke, dust and fumes from industrial workplaces. Thanks to its space-saving design, it can be flexibly integrated into various production environments. The advanced technology ensures a clean and safe working environment, while operation remains quiet and maintenance is minimal.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 0650173823, overall weight: 87 kg, filter area: 10 m², Specification: Gusdpfswq R Dbjx An Ijg Operating temperature range: 0–+50°C Operating voltage: 400V/50Hz Control voltage: 24V DC Connected load: 5 kW Max. blower air flow: 580 m³/h Max. achievable negative pressure: 37,500 Pa Max. device air flow: 520 m³/h Min. air flow: 100 m³/h The Fumator Minivac 500D is a compact and reliable extraction system that efficiently removes smoke, dust, and fumes from industrial workplaces. Its space-saving design allows for easy integration into various production processes. With its innovative technology, it ensures a clean and safe working environment while remaining pleasantly quiet and low-maintenance during operation.

Condition: excellent (used), Year of construction: 2026, operating hours: 10 h, functionality: fully functional, working width: 550 mm, overall weight: 235 kg, tank capacity: 50 l, total height: 1,082 mm, total width: 663 mm, total length: 1,284 mm, water tank capacity: 50 l, The battery-powered scrubber-dryer B 50 W Bp Pack R55, manufactured in 2026, is ideally suited for efficient floor cleaning in public buildings and retail environments. Its compact design provides excellent visibility and allows for agile operation, even in hard-to-reach areas. The aluminum die-cast brush head and suction bar make this walk-behind machine extremely robust and durable. The R55 brush head ensures clean and powerful cleaning, particularly on structured surfaces. The roller brush deck is especially well-suited for coarse dirt particles (such as wood splinters). The roller brushes “sweep” the coarse dirt particles into a separate container for coarse dirt, which is positioned directly behind the roller brushes. This prevents particles from sticking to the suction foot and affecting the suction result. The wheel drive makes operation easier and reduces the physical strain on the user. Fresh water can be easily refilled through the universal filling hose at any water tap. Furthermore, the “Machine connect” app allows for easy control of extended settings and information via smartphone. Technical data: Drive system: Drive motor Working width, brushes: 550 mm Working width, suction: 850 mm Fresh/dirty water tank: 50/50 liters Theoretical area performance: max. 3,600 m²/h Practical area performance: 2,160 m²/h Permissible total weight: 235 kg Gsdpfsz Ag Nzsx An Ieug

Condition: new, Technical data: Belt speed: 15 / 30 m/s Sanding diameter: 20 - 76 mm Carriage adjustment: 30° - 90° Surface grinding table: 400 x 100 mm Contact wheel ø x W: 195 x 100 mm Suction connection ø: 2 x 75 mm Speed: 1420 / 2660 1/min Motor power: 2.5 / 3.3 kW Dimensions (WxDxH), approx.: 750 x 1400 x 1200 mm Weight, approx.: 148 kg Features: - Consistent belt tension due to spring-loaded tensioning device - With cylindrical sanding device for sanding diameters from diam. 20 - 76 mm as standard - Quick and easy adjustment of the desired sanding angle Godpoqvmqysfx An Ijug - Graphite coating on the face grinding surface increases the sliding properties of the sanding belt - Large flat sanding surface with protective cover - Slow belt speed (15 m/s) optimal for sanding stainless steel and aluminum - User-friendly belt change, quick and uncomplicated - Quick and easy changing of the sanding rollers without tools - Various sanding angles from 30° to 90° easily possible - Shorter processing times compared to milling Scope of delivery: - Sanding belt K 36 - Rubberized sanding drum - 1 sanding roller for 1 1/4" (42/44 mm pipe) - 2 hinged protective discs - Sanding and support table - 2 x dust extraction nozzles diam. 75 mm - 2 x chip container - Graphite coating - Motor protection switch

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Suction capacity: 10,000 m³/hour. Guodez Akpfspfx An Iog

Condition: used, Year of construction: 2013, .30 Base machine ACCORD 30 FX N. 1 CONCEPTCNC machining center with a moving gantry and a fixed worktable for processing various sheet-like materials: chipboard, MDF, laminated solid wood, plastic materials, and light alloys. STRUCTUREThe machine is developed using the best three-dimensional CAD systems for solid modeling. The machine bed and moving crossbeam represent the two main elements of the machine structure and are manufactured in the company's own foundry. All mechanical machining operations are carried out on special production equipment in a single setup to ensure optimal precision and to minimize tolerances during machining. The control cabinet is mounted directly on the machine bed, allowing for a very compact design and easy access. CONTROL UNITThe control unit consists of an industrial NC control system with an integrated office PC (desktop computer). The CNC solution with an office PC combines all the features of numerical control with the typical user-friendliness of an office PC, which greatly simplifies the control of the machine by enabling the use of the XILOG MAESTRO user interface, i.e., the software developed by SCM for simple and fast programming, even for non-experts. GENERAL FEATURESPassage height: - 250 mm with H50 accessories- 190 mm with H110 accessoriesPendulum machiningAutomatic lubrication of the axesAir conditioning system to maintain the correct internal temperature in the control cabinet. Software for remote customer serviceOperator interface Xilog MAESTRO with integrated CAD/CAM, which allows for the extremely simple execution of products even with special shapes.A number of advanced functions allow for: - programming via macros- creating and managing subprograms- optimizing machining- managing all machine functions- creating and managing a database of tools93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz R0.00.03 LINGUA P.C. GERMAN 02.12.57 ACCORD 30 FX - Worktable X-Y = 3680x1380 56.05.25 No. 6 Support rail MATIC - L1300 The worktable is equipped with: - no. 2 lateral fixed supports- no. 6 aluminum supports, motor-driven and movable along the X-axis- motorized conveyor belt for unloading chipsEach movable support has: - no. 3 motor-driven support rails for clamping cylinders and vacuum suction cups- air blower for cleaning on each movable support- pneumatic locking/release for quick replacement of the clamping cylinders and vacuum suction cups- preparation for lifting devices- preparation for reference stopsThe workpiece vacuum clamping system is divided into 2 independent worktables.23.02.19 DUO Prisma K working unitThe working unit with 5 interpolating axes is located on the moving crossbeam, which provides maximum stability during milling and thus also ensures optimal machining quality of the workpieces, even with high material removal rates. It allows for rotation around the axes arranged at 50° to each other and has many advantages over traditional 5-axis working units, such as: - the full use of the work areas both with 5 axes and with a vertical spindle- spindle external dimensions outside the working area- a particularly light design for horizontal machiningThe unit has a central chip extraction system. Gedpfjzl Ap Nsx An Ieug