Used Sand Spreading Machine for sale (64,861)

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Podpfot Tqy Esx Abgopu Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: used, Year of construction: 1992, ~ 2.780 mm Podpfjzawi Uex Abgjpu Working width ~ 950 mm Motor output 6 kW Johannsen Type T 95 long-belt sander for the precise sanding of solid wood and veneer surfaces. The machine is ideal for joineries and high-end interior finishing, and its sturdy construction and precise belt control ensure a uniform finish.

Condition: used, functionality: fully functional, De Stefani MVT 1600 edge sanding machine 2 sanding units Unit power: 2 x 1.8 kW Psdjzhlhgspfx Abgjpu Two sanding belt speeds Maximum workpiece height: 80 mm Self-sharpening sanding unit Manual adjustment of the sanding unit Manual adjustment of the unit angle Sanding units with oscillation Feed speed adjustable by means of a variator Feed motor power: 0.74 kW

Condition: excellent (used), Year of construction: 1984, Description to follow! Pjdpfxezbczls Abgopu

Condition: used, Year of construction: 1994, Max. passage height: 160 mm Sanding belt length, unit 1: 1900 mm Max. working width: 1350 mm Number of belts: 2 Belt, unit 1: Calibrating roller, grooved, rubber design Unit 1: Steel, grooved Sanding belt width, unit 1: 1350 mm Unit 2: Combination sanding unit Design, unit 2: Roller/shoe Control: Manual control panel, electric/pneumatic Ppodpfx Aey Naq Uobgou Belt oscillation: pneumatic Infeed height: fixed (top section moves) Table stroke: electro-mechanical Table display: mechanical numerical display Working height or feed table height: 900 mm Location: Nattheim

Condition: like new (used), For sale is a like-new JET cylindrical grinding machine, model JWDS 1632, with a maximum grinding width of 406 mm / 812 mm in 2 passes. The machine is in like-new condition and has been refurbished and inspected by our qualified technicians. (Fully functional) Technical specifications: - Power: 230 V / 1.1 kW / 1.5 HP - Drum speed: 1,450 rpm - Grinding speed: 9.5 m/s - Feed rate: 0 - 3 m/min - Maximum grinding width: 406 mm / 812 mm in 2 passes - Minimum grinding length: 60 mm - Grinding thickness: max / min 75 / 0.8 mm - Dust extraction connection: 100 mm - Dimensions (L x W x H): 1,010 x 510 x 1,270 mm - Weight: 71 kg The machine is located in A-8561 Söding and can be inspected and collected at any time during our opening hours. Subject to prior sale! Ppodpfezgrz Rsx Abgju Related terms: grinder, grinding machine, grinding Reference: R-R05Y9

Condition: used, Year of construction: 2017, working width max. 240 mm Pjdjxwtwuspfx Abgjpu Sanding height max. 140 mm weight ca. 2200 kg

Condition: used, Colour: Grey Polishing sander Pjdpfjwnh Avex Abgspu Löwer FA 4 S Year of construction 1998 Machine no. 9667 400V, 14.5Amp. 4x 0.37kW motor Working length 3000mm Dimensions: 5000x18050x1600mm (LxWxH), weight 550kg - Documentation available: Yes - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2023, New demonstration machine! List price €4,938 net. The robust Junior R1 offers all the features you would expect from a modern edge sanding machine. Its massive grey cast iron sanding unit with a powerful motor ensures maximum sanding performance. The work table, height-adjustable by spring pressure, allows for optimal belt use and safe operation. The upper section is made of heavy cast iron with an integrated three-phase motor (380 V, 2.2 kW, 2850 rpm). The machine is equipped with a built-in switch-plug combination, motor protection switch, and main switch compliant with VDE standards. Sanding belt back panel dimensions: 850 x 150 mm. Steel table height-adjustable by spring pressure. Belt size: 150 x 2280 mm. The sanding belt back panel is covered with a protective pad. The machine, when connected to a central extraction system with an air speed of at least 20 m/s, is dust-certified (GS). Includes angle and mitre fence. Technical data: • Motor power: 2.2 kW • Belt size: 150 × 2280 mm • Belt speed: 22 m/sec • Table size: 750 × 350 mm • Required space: 1000 × 800 mm • Weight: approx. 180 kg • Extraction connection Ø: 100 mm. Location: Rieth Pjdsx Hwr Rjpfx Abgjpu

Condition: used, Year of construction: 2024, New demonstration machine! List price: €4,938 net. The upper section is a heavy-duty cast iron design with an integrated three-phase motor, 380 V, 2.2 kW, 2850 rpm. The machine is equipped with an integrated switch-plug combination, motor protection switch, and main switch compliant with VDE standards. Dimensions of the sanding belt backing: 850 x 150 mm. The steel work table height is adjustable via spring tension. Belt dimensions: 150 x 2280 mm. The sanding belt backing is covered with a graphite slip lining. The machine is supplied with an assortment of sanding belts; also included in the scope of delivery are an angle and miter gauge. When connected to a central extraction system, the machine is dust-tested (GS) by Holz-BG Stuttgart for an airspeed of at least 20 m/s. Standard equipment includes: - tiltable 90-180°, - motorized belt oscillation, - small support table at the deflection roller, - pneumatic belt tensioning. Technical data: Motor power: 2.2 kW. Sanding belt size: 150 x 2280 mm. Sanding belt speed: 22 m/s. Table size: 750 x 350 mm. Space requirement: 1000 x 800 mm. Weight: from 180 kg. Extraction connection Ø: 100 mm. Storage location: Rieth. Ppodpjx Hwpvofx Abgeu

Condition: used, Year of construction: 2024, New showroom machine! List price: €10,643 net. The model for enhanced comfort. The RS-2010 edge sanding machine, with its versatile features, provides complete processing in edge sanding. Quick switching between freehand and veneer edge sanding, belt oscillation, and continuously adjustable sanding unit tilt allow for universal machining. The height-adjustable pneumatic support table and pneumatic belt tensioning ensure easy handling. Technical features: - Pneumatically height-adjustable work table - Continuously adjustable sanding unit tilt up to 45° - Simple conversion to veneer edge sanding - Pneumatic belt tensioning - 0 - 45° display for sanding unit - Stable support table at the return roller - Feed console - Angle and mitre fence Pjdpfex Hwppjx Abgepu Technical data: Motor power: 3 kW Belt speed: 22 m/s Belt length: 2,760 mm Belt width: 200 mm Table size: 450 x 920 mm Required space: 1,200 x 2,000 mm Extraction (dust collection): 120 & 80 mm Total weight: approx. 500 kg + 5 years warranty on all our products (except wear parts)! Stock location: Rieth

Condition: used, sanding width 150 mm Motor output 1 kW tiltable up to 90 Grad Three-dimensional, swivel-mounted Löwer type KS 225 edge sanding machine for precise sanding of straight and curved wooden edges. The lightweight design and powerful motor enable a uniform sanding pattern with high removal rates. Ideal for small joineries, furniture construction and interior fittings. Ppsdpfxsy Umfvs Abgju Possible applications: Horizontal edge, horizontal plane or vertical bevel.

Condition: used, Disc sander with spindle sander KURT EHEMANN type V K8 Combined drum sanding machine - double sanding machine, cylindrical rod sanding machine Machine no. No. 6812420 Year of construction 1968 Sanding disc diameter 800 mm Ppjdpfork U Edox Abgsu Table support on sanding disc 900 x 300 mm Sanding disc speed 940 rpm Table height of sanding disc 900 mm Spindle sanding unit with sanding sleeve Ø 50 mm Table support for spindle sanding unit Ø 500 mm Table height spindle sanding unit 1000 mm Spindle sanding unit speed 1410 / 2420 rpm pole-changing Motor power sanding disc 3 kW Motor power spindle grinding unit 1.1 / 1.6 kW Mains connection 380 Volt, 50 Hz - inclinable sanding table, 30° downwards/ 15° upwards - the entire table can be swiveled away from the plate for changing sandpaper - Spindle sanding unit with clockwise/anticlockwise rotation (1410 rpm for clockwise rotation, 2420 rpm for anticlockwise rotation) - Spindle sanding unit with oscillating stroke movement 10 mm - Height-adjustable grinding spindle in the table - Spindle sanding unit with inclinable rotary table, inclinable by approx. 30° - Rotary table with removable segment inserts Ø 54 / 84 / 308 mm - Pipe connection for extraction system, rectangular 100 x 170 mm Space requirement L x W x H 1500 x 1100 x 1400 mm Weight 550 kg Very good condition

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total length: 3,350 mm, working width: 400 mm, grinding width: 400 mm, overall weight: 4,800 kg, power: 34 kW (46.23 HP), Equipment: documentation/manual, double-sided, Edge sanding machine / Parquet sanding machine Manufacturer: VG Machines Type: F/G 455 2 KS / 2KS Year of manufacture: 2018 Machine comes from a parquet manufacturing facility In-line design / Wide-belt machine (movable upper section) for calibrating and sanding from both top and bottom in a single pass Working width approx. 400 mm Equipped with: 1x Calibrating roller, top, approx. 11 kW 1x Sanding shoe, top, 5.5 kW 1x Calibrating roller, bottom, approx. 7.5 kW 1x Sanding shoe, bottom, 5.5 kW Sanding belt dimensions: 455 x 1900 mm Feed speed steplessly adjustable, max. 16 m/min, motor approx. 2.2 kW Ppodpfx Ajzamapjbgeu Voltage: 400 V Total connected load: approx. 34 kW

Condition: excellent (used), Year of construction: 1999, Manufacturer: WEGOMA Model: KS 2400 Category: Edge sanding machine Year of manufacture: 1999 Table width: 300 mm Table length: 730 mm Psdpfx Aeyza Ahsbgopu Total units: 1 Max. sanding belt width: 150 mm Sanding belt length: 2,400 mm Main motor: 1.85 kW Sanding sleeve Round sanding support Oscillation Height adjustment: Table, manual Sanding belt tiltable: Yes Required length: 1.7 m Required width: 0.8 m Required height: 1.5 m Location: ex-stock 54634 Bitburg - immediately available - Subject to prior sale

Condition: used, tiltable up to 90 Grad Psdoy T Sa Njpfx Abgopu sanding width 180 mm Motor output 1,6 kW Lightweight, swivel-mounted MetaboType Tba 1018D edge sanding machine for precise sanding of straight and curved wooden edges. The lightweight design and powerful motor enable a uniform sanding pattern with a high removal rate. Ideal for small joineries, furniture making and interior finishing. Includes original Metabo base frame.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, The machine is in good condition, has been in use until recently, and is now available for sale due to a new purchase. Pedpfszdvupox Abgopu The machine has been regularly serviced. It is ideally suited for sanding solid wood, both straight and profiled parts. The processing side, with its guides, features an adjustable sanding shoe. The feed mechanism is an ideal addition for finer edge sanding on straight edges. The machine has a compressed-air-operated belt oscillation for optimal sanding results. The machine has a chassis. Various sanding belts are included.

Condition: used, Dimensions (l x w x h) approx.: 3200 x 1800 x 1600 mm Weight approx.: 500 kg Pjdpfx Aexrlgwsbgopu 3 spindles, 1 milling spindle, 2 - 3 grinding and milling spindles, feeder belt approx. 100 mm wide, total working length approx. 3000 mm, extendable workpiece support

Condition: excellent (used), ITALMECCANICA PROFILWOOD MAK6B Automatic Grinder / Sanding machine 6 sanding units, each 1.5 kW, max. working width 250 mm, Pedpfxsdykwle Abgspu Depth 0-250 mm, min. Dimensions in mm: approx. 4700 x 2000 x 2300, Weight in kg: approx. 3000, (Makor, Delle Vedove, Venjakob, Flader)

Condition: excellent (used), Type: K77 - Year of manufacture: 1995 - Table size: 970 × 180 mm - Operating voltage: 400 V - Supply voltage: 230 V - Power: 2.4 kW - Frequency: 50 Hz Podpfxoy Sap Ao Abgjpu - Incl. sanding belts: 12 pcs grit 120; 4 pcs grit 80; 10 pcs grit 150

Year of construction: 2013, condition: not inspected (used), Number of sanding units 4 st. sanding width max. 200 mm Sanding height max. 7-150 mm Working speed 8-16 m/min Band Speed 18-30 m/sec Stähle-Hess Sanding Machine Saturn-Duo ----- Manufacturer's Technical Description: Stähle-Hess Finish Sanding Machine, Model Saturn Duo Ppodpfx Absy Spvlogou Featuring 2 sanding units, plus additional upper and lower Roto-Finish sanding units. 1 Upper sanding belt 1 Lower sanding belt 2 Upper Roto-Finish sanding units 2 Lower Roto-Finish sanding units Workpiece Dimensions Height: 7–150 mm Width: max. 200 mm Minimum length: 300 mm Belt speed: 18–30 m/s (variable) Feed rate: 8–16 m/min (variable) ----- Price for the above-mentioned machine available upon request! ----- Note: This machine was previously used in conjunction with a Weinig Variomat four-sided planer/moulder (see Stock No. #7007). (Technical specifications provided by the manufacturer – subject to verification!) All listed prices are net, plus applicable statutory VAT.

Condition: excellent (used), functionality: fully functional, Volpato LBO 60 belt grinder Table length: 3000 mm. Table width: 1100 mm. Vertical travel: 680 mm. Maximum belt length: 8500 mm. Belt width: 150 mm. Belt feed motor power: 5.5 HP Table lifting motor power: 0.5 HP Dust extraction motor power: 1 HP Belt speed: 18 m/s Overall dimensions: 4500 x 1500 x 1500 mm. Weight: 600 kg. Podpfx Ajzd Ethjbgspu

Condition: used, Year of construction: 1995, functionality: fully functional, grinding height: 100 mm, grinding length: 3,250 mm, We are offering this used Löffler KSL-100 MG edge sanding machine, year of manufacture 1995. Manufacturer: Löffler Maschinenbau GmbH Langenaltheim / Bavaria Pedpfx Aoythu Isbgopu Model: KSL-100 MG Serial number: 95.005/6/95 Year of manufacture: 1995 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Belt sander Make Karnasch Type ALMI AL 100 with 6 different contact rollers or sanding rollers Diameter : 17,5 - 20 - 22 - 28 - 38 - 48 mm Pjdpfeuf N Scsx Abgopu belt width 100 mm length 2000 mm Grinding range for grinding diameter 20 - 76 mm

Condition: used, Working width 1.350 mm Number of sanding units 2 st. Workpiece thickness max. 150 mm Pedpfxjyyc Drs Abgepu Multi-purpose surface sanding machine Heesemann type MFA 6 Impression Q2 - LF for precise surface, veneer, lacquer and intermediate sanding in woodworking. The machine is suitable for solid wood, coated workpieces and sensitive surfaces in furniture and interior finishing. The infinitely variable feed rate and vacuum clamping ensure a clean and even sanding pattern. Available from week 33/2026