Used Scanlab Powerscan Ii 50I for sale (2,202)

Condition: ready for operation (used), Year of construction: 2013, A Heuft empty bottle inspector is available. Inspection areas: base/foot/sidewall/finish ring/underchip/finish, sensors: infrared, image processing system: Heuft reflexx, performance range: 5000-50000bottles/h, machine dimensions X/Y/Z: approx. 2050mm/1000mm/1850mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible. Podpfx Aoxqgxrjbusgu

Year of construction: 1995, condition: ready for operation (used), High speed model with SPLIT ROLL high low pile patterning device, working width: 5180mm, needle gauge: 1/8 inch, 1632 (2x 816). Equipment: adjustable needle stroke eccentric and needle stroke adjustment lever with counterweights, prepared in side drive frames, easily accessible at working height, pile height adjustment range 5-16mm, table height adjustment (machine bed) with hydraulically controlled table lock via ENCORE PC memory programmable controller, looper stroke and knife stroke eccentrics with counterweights, 2 needle bars with individual needles, 2 looper bars with Cut Loop individual loopers, 2 knife bars with Tuftco knife blocks, 8 knives per block, individually replaceable, reed plates for front and rear needle bar, ENCORE PC memory programmable controller for controlled stitch density and controlled backing tension, main shaft designed as a hollow shaft with integrated pump controlled pressurized oil circulation lubrication or spray lubrication to each needle drive connecting rod bearing and main shaft bearing in the side drive frames, 2 PC memory programmable HYDRASHIFT DRIVES for smooth needle bar shift, 12 shift steps each to the right/left per needle bar, high speed version with linear slide bearings in the needle bar suspension, pneumatic disc brakes on the main shaft, main shaft rotation via ratchet indexing gear, variable main drive (2x15HP) with frequency inverter, Siemens memory programmable controller with fully wired control cabinet, mounted externally on the control cabinet door. An on-site inspection is possible. Pgsdozcfhdspfx Abuju

Condition: ready for operation (used), Year of construction: 1985, A Bullmerwerk fabric spreading machine including a Wastema band knife cutting machine is available. 1) Bullmerwerk fabric spreading machine, ESV20-160, max. fabric width: 1800mm, table length range: approx. 9500mm-13500mm, table width range: approx. 1800mm-2000mm, max. ply length: approx. 11000mm. Year of manufacture: 1985. 2) Wastema band knife cutting machine, cutting height range: approx. 250mm-300mm, throat depth range: approx. 750mm-1270mm, band knife speed: approx. 16m/s, weight: approx. 300kg. 3) Rietschle SKG 226-2.02 vacuum unit, year of manufacture: 1984. The system including 3 pieces km Mack KS-AU-V, speed: 3000/3600 rpm. Inspection possible by arrangement. Pgodpezf Nb Sjfx Abuou

Condition: ready for operation (used), Year of construction: 1985, An old but fully functional IMA double-end profiler is available. Working width: 2000mm, max. cutting height: 35mm, machine dimensions X/Y/Z: approx. 4000mm/6000mm/3000mm, weight: approx. 3000kg. Documentation available. An on-site inspection is possible. Psdpfszc Rdkjx Abujgu

Condition: ready for operation (used), Year of construction: 1997, A 1.5-times linked IMA edge processing line with automatic Venjakob workpiece transfer is offered. Max. working width: 2500mm, transfer angle: 90°, distance between the workpiece edges: 6000mm. Control system: Siemens S5. Including peripheral equipment and conveying system. Required installation space: approx. 250-300m², overall dimensions X/Y: approx. 19000mm/13600mm. IMA. Operator PC: renewed in 2018. Inspection possible by appointment. Pgsdpfx Abszh Nh Rouju

Condition: ready for operation (used), Year of construction: 2019, A Fujifilm UV flatbed and roll printing system is available. Roll weight: 25kg, max. roll media width: 1620mm, max. rigid media width: 1610mm, min. media width: 210mm, max. media thickness: 13mm, max. roll outer diameter: 180mm, media core diameter: 2inch/3inch, max. print length: 3030mm, media guidance: 170mm. Machine dimensions X/Y/Z: approx. 3250mm/800mm/1550mm, weight: approx. 300kg. The system was only used from December 2019 until early 2024. Documentation vorhanden. An on-site inspection is possible. Pedpey Tav Eofx Abuogu

Condition: ready for operation (used), Year of construction: 2024, spindle motor power: 22,000 W, spindle speed (max.): 4,000 rpm, travel distance Y-axis: 105 mm, controller manufacturer: FANUC, controller model: i Series, number of axes: 4, This 4-axis DN SOLUTIONS PUMA 2600Y II was manufactured in 2024. It features a maximum turning diameter of 376 mm and a turning length of 760 mm. The machine is equipped with a main spindle speed of 4,000 rpm and a turret with 12 tool stations. If you are looking to get high-quality turn-mill capabilities, consider the DN SOLUTIONS PUMA 2600Y II machine we have for sale. Contact us for further details. • 15" color touchscreen display • iHMI Easy Operating System (EZI & Machining Cycle) • Absolute feedback system • CE certified • Metric configuration • Power supply: 3 Phase AC 380V / 50Hz • Number of axes: 4 (X, Z, Y, C) • Maximum turning diameter: 376 mm • Maximum turning length: 760 mm • Bar capacity: 81 mm • Main chuck size: 255 mm (10") • Hardened & ground hard jaws • Main spindle motor power: 22 / 15 kW • Built-in spindle design • C-axis functionality Pgsdpfozlqpqex Abuou • Milling spindle power: 7.5 / 1.5 kW • Live tool speed: up to 10,000 rpm • Turret type: BMT65P • Number of tool stations: 12 • Automatic electric tool setter • Programmable live tailstock • MT5 live center • Coolant pump: 1.1 kW / 1.0 MPa / 20 L/min • Flood coolant for rotary tools • Coolant tank on right side • Thermal compensation structure • Chuck clamp confirmation • Bar feeder interface • Embedded Ethernet • Program storage: 5,120 m (2 MB) • 1,000 program capacity • 128 tool offset pairs • 8 work coordinate systems • Built-in transformer • Electrical line filter • 3-color signal tower (red / yellow / green) • Tool number display Additional equipment • Hinged belt chip conveyor (right side) • Belt-type oil skimmer • Parts catcher with collection box • Coolant gun • Air gun

Condition: used, Year of construction: 2023, operating hours: 30 h, functionality: fully functional, machine/vehicle number: Digitest II, DIGI TEST II Modular hardness testing system for fully automatic hardness tests according to Shore, VLRH, and IRHD on composite materials, soft-elastic materials, elastomers, plastics, and foams with variable test geometries. Standards: • ASTM D2240 • ASTM D1415 • DIN EN ISO 868 • DIN ISO 48-2 • DIN ISO 48-3 • DIN ISO 48-4 • NFT 46-003 • TD 00002001 • TD 00002002 • Measurement methods: • Shore A • Shore A0 • Shore D • Shore 0 • Shore 00 • Shore 000 • Shore 000S • Shore E • Shore B • Shore C • Shore D0 • Micro Shore A • Micro Shore D • Shore AM • Shore M • IRHD L • IRHD N • IRHD M • IRHD H • VLRH Application areas Flat, inclined, convex, and concave geometries of composite materials, soft-elastic materials, elastomers, plastics, and foams. The digi test II enables precise and user-independent hardness measurements on elastomers, polymers, soft-elastic materials, composite materials, and foams. This modularly expandable measuring system is used in research and development as well as in production and quality control to determine the material hardness of a broad product portfolio and to ensure quality standards. Modularly expandable Interchangeable measuring devices allow for easy switching between the numerous measurement methods in the areas of Shore, IRHD, and VLRH without tools and with only a few steps. Due to the wide range of positioning and measuring devices offered, the digi test II is the right choice for the laboratory, production, quality assurance, and development when testing a broad product portfolio. Many shapes – one solution Pjdpfx Abszn I Tfsuogu The modular expandability of the digi test II enables the measurement of all sample geometries. Whether you want to perform measurements on flat, inclined, concave, or convex geometries, you will obtain exact measurement values from a sample thickness of 0.7 mm thanks to the approach system. ROTOFIX FOR DIGI-TEST II Positioning device available as an accessory for the automatic measurement of a different number of samples and measuring positions. Secure measurement results without user influence In addition to perfect alignment as a table unit, the Digi-Test II ensures the optimal measuring position of the test samples through its numerous positioning devices. The most accurate measurements without user influence and manual pre-setting are guaranteed, which saves you time for the important things. Comprehensive analysis through various measurement methods Do not just measure the hardness of your test specimen, but also the flow curve of the material during the test. With the option for hysteresis measurements, the Digi-Test II provides additional insights into the characteristic properties of the material. CENTROFIX Manually adjustable positioning device, available as an accessory for measuring individual test specimens for the digi test II as well as the Gelomat. Modular attachments on the Centrofix allow samples and molded parts of all kinds to be clamped and fixed for measurement.

Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 550 mm, spindle motor power: 11,000 W, controller manufacturer: OKUMA, number of axes: 5, This 5-axis Okuma LB2000EX II was manufactured in 2013. It features a maximum turning diameter of 360 mm and a turning length of 500 mm. The machine includes a robust turret with 12 stations and a main spindle speed of 6,000 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB2000EX II horizontal turning machine we have for sale. Contact us for further details. • Maximum turning diameter: 360 mm • Maximum turning length: 500 mm • Maximum bar capacity: 62 mm • W-axis travel: 500 mm • C-axis indexing: 0.001° • Main spindle nose: ASA 6" • Sub-spindle maximum speed: 6,000 rpm • Sub-spindle motor power: 11 / 7.5 kW • Turret stations: 12 • Driven tool speed range: 45–6,000 rpm • Driven tool motor power: 5.5 / 3.7 kW • Turning tool size: 20 × 20 mm • Boring bar capacity: Ø32 mm Pgsdpfx Aszcphujbuou Additional equipment • Bar feeder: TOP XF365 (YOM 10/2013, installed 2014) • Hinge-type chip conveyor • Manual tool setter (presetting) • Parts catcher Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: new, functionality: fully functional, machine/vehicle number: 0001, Year of construction: 2025, load capacity: 2,000 kg, lifting height: 4,700 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,150 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Chassis number: 0001 Pjdey Upt Nopfx Abuogu Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: New device Technical condition: New Front tires type: Superelastic Front tires condition: New Rear tires type: Superelastic Rear tires condition: New Battery type: PzS Battery year of manufacture: 2024 Battery condition: New Side shift, 3rd valve, 4th valve, rear work light, front work light, windscreen, half cabin, load protection grille, windscreen wiper, LED,

Condition: used, mileage: 105,575 km, power: 95 kW (129.16 HP), first registration: 03/2014, fuel type: diesel, overall weight: 5,000 kg, next inspection (TÜV): 04/2028, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, * 1st hand * Low mileage * 5-ton payload, twin rear wheels (currently downrated to 3.5t) * Extra-long flatbed: 4.30 meters * Trailer hitch with 3-ton towing capacity * Automatic transmission * TÜV valid until 04/2028 * 3-seater Pjdoyy Txyepfx Abuegu Special equipment: Hill start assist, 13-pin trailer socket, 180 A alternator, spare wheel with super single tires (235/65 R16), spare wheel holder under rear frame incl. jack, interior rear-view mirror, rear panel with window, cabin seating: twin passenger bench, reinforced rear stabilizer, reinforced front stabilizer, 95 Ah AGM battery Additional features: Adaptive brake light, driver airbag, washer fluid level indicator, electrically adjustable and heated exterior mirrors (both sides), exterior mirrors with integrated indicators, 74 Ah battery, brake assist, braking system with ABS + ASR, cabin roof lining, lockable glove compartment, standard flatbed body, main fuel tank 75 liters, headlight range adjustment, truck registration, model update, engine: 2.1 l – 95 kW CDI CAT (2143 cc), wheelbase: 4325 mm, smoker package, low emissions according to Euro 6 standard, driver's seatbelt with warning system, seat trim/upholstery: Lima fabric, adjustable passenger seat, ASSYST maintenance interval indicator, heat-insulating glass, permissible GVW: 5.0 t, twin rear wheels on 2nd/rear axle.

Condition: excellent (used), Year of construction: 2003, 526 USED Industrial line for the production of rolls, Kaiser rolls, hamburgers, and hot dogs. EQUIPMENT: - KOENIG INDUSTRIE II divider-rounder - 6 rows - pre-proofer - bun marking station - final proofer TECHNICAL DATA: - year of production: 2003 - capacity 3000-12,000 rolls/h - weight 50-130 g - marking: 3 roll markings: Kaiser roll, Portuguese roll - final proofer equipped with temperature and humidity control EXTERNAL DIMENSIONS (in cm): LINE: - W: 180 cm - L: 900 cm - H: 376 cm FINAL PROOFER: - W: 340 cm - L: 460 cm Pgsdpfx Abszwxr Rjueu - H: 380 cm The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: used, mileage: 182,178 km, power: 95 kW (129.16 HP), first registration: 02/2013, overall weight: 5,300 kg, fuel type: diesel, color: orange, gearing type: automatic, emission class: euro5, Year of construction: 2012, total length: 6,400 mm, total width: 2,100 mm, total height: 2,800 mm, number of seats: 6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Special equipment: 1 DIN slot in the front under the headliner, trailer socket 13-pin, audio system Audio 20 (radio with CD player), exhaust in front of the rear axle on the left, exterior mirrors without integrated turn signal, outside temperature display, battery 100 Ah, additional battery (reinforced), turn signals at the front on the sides, roof control unit with reading light on the driver/passenger side, entry lights, generator 220 A, additional master key, folding cover for storage compartment, steering wheel (steering column mechanically adjustable), steering wheel with multi-function including trip computer, parameterizable special module, spare wheel with Super-Single tires (235/65 R16), reversing warning system (audible warning signal outside), interior rearview mirror, rear wall with window, mud flaps at the front, seat cover/upholstery: artificial leather (driver's cab), seats in the driver's cab: comfort suspension seat, driver's side, reinforced rear stabilizer, reinforced front stabilizer, fuel gauge for auxiliary heater, separation relay with additional battery, rear wall trim, reinforced front axle, preparation for tachograph, thermal insulation of driver's cab, auxiliary heater (hot water) Additional equipment: Pgodpozwn Diofx Abuju Adaptive brake light, driver's airbag, display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated turn signal, braking system with ABS+ASR, headlining in the driver's cab, lockable glove compartment, body/structure: flatbed double cab standard, fuel tank: main tank 75 L, headlight range adjustment, engine 2.1 L - 95 kW CDI CAT (2143 ccm), wheelbase 3665 mm, smoker's package, low emissions according to exhaust standard Euro 5, safety belt system with warning system (driver's side), service interval display Assyst, heat-insulating glazing, permissible total weight 5.00 t, twin tires on 2nd axle / rear axle Additional equipment: Central locking * Auxiliary heater * Radio * Snowplow mounting plate with hydraulic quick coupler * Control unit for snowplow * Elevated headlights * Trailer coupling * Turning assistant * Rotating beacon +++Signs of wear and tear+++Originally owned by a municipal authority+++

Condition: excellent (used), functionality: fully functional, MAZAK – 5-axis machining center VARIAXIS 730/5X II (dual pallet changer) Psdpfx Abjzda Dvsusgu Manufacturer: Machine Type: Year of manufacture: Date of commissioning: YAMAZAKI MAZAK Variaxis 730 with dual pallet changer 12/2007 02/12/2008 FEATURES: - Drive power 30/22 kW (30 minutes/continuous operation) - Spindle speed 35-10,000 rpm - Rapid traverse rates 42 m/min - 80 tools - SK50 !!!! - Control system: MAZATROL MATRIX - Tool length measuring device 2 ACCESSORIES: - MAYFRAN chip conveyor "CONSEP 2000", discharge on the right - High-pressure coolant for the spindle, 70 bar - CNC options package, performance signal light - Preparation for monitoring system B

Condition: good (used), Year of construction: 2003, X 1740mm, Y 766mm, Z 660mm 10000 rpm Parts shown by hand not come. Pjdswyblzspfx Abuogu

Condition: used, maximum load weight: 29,352 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2017, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 3,050 mm, loading space volume: 102 m³, Equipment: ABS, VEHICLE NUMBER: 2814 Pgodpfxjwibi So Abuou EXTERIOR EQUIPMENT: * Galvanized frame * Sliding tarpaulin, neutral, without lettering/stickers * Additional tarpaulin tensioner at the front * Steel corner supports at the front and rear * Sliding roof Schmitz Safety Roof (Edscha) * Lifting roof with stanchion lifter * Body with adjustable height at the front: 7 x 50mm / at the rear: 4 x 50mm * Ferry equipment for solo/unaccompanied transport * Reinforced HD frame at the front * Underrun protection, bolted, FERRY type with sliding skid * Trailer information system Smart-Board with axle load display * Tarpaulin rope * Steel rear impact guard * Document box TECHNICAL FEATURES: * Rotos axles with disc brakes * Air suspension with anti-roll bar on the first axle * Tires 435/50 19.5 * Tread depth in mm: 1st axle: 11/11, 2nd axle: 8/8, 3rd axle: 7/7 * Lashing points in the outer frame * Lashing eyes: 7 pairs of 2 tons and 11 pairs of 5 tons * Pallet stop on both sides * Certificate for load securing EN 12642 Code XL, Daimler 9.5, beverages * Reinforced cargo floor * EX/II approval * Unladen weight 6,648 kg * Fifth wheel height 925mm * TÜV/MOT: 12/25, Next inspection: * Example lease-purchase: €279 per month, term 36 months, 10% down payment (can also be your used vehicle), 10% final payment. * Delivery to your location possible. Trade-in/Leasing/Financing. We can make it happen!

Condition: excellent (used), Year of construction: 2010, turning length: 995 mm, spindle bore: 80 mm, Max. turning Ø: 530mm X-Axis: 260mm Z-Axis: 995mm Spindle bore: 80mm Speedrange: 5000Rpm Spindle power: 22kW Psdpfx Aex I Nbtjbujgu Subspindle speeds:6000Rpm Subspindle bore: 62mm Subspindle power:11kW ATC / revolver: 12 Speed live tools:6000Rpm Tool eye: yes Hours: 2800H Length: 3000mm Width: 1800mm Height: 1900mm Weight: 6350kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2008, CNC Lathe Okuma LB 4000 EX – MY C750 Control: OSP-P200L Year of manufacture: 2008 Internal machine number: 21 Turning length: 750 mm Turning diameter: 430 mm Swing diameter over bed: Ø 670 mm Swing diameter over carriage: Ø 480 mm Spindle speed: 42 – 4,200 rpm Tool turret V12 (all stations driven) Pedpfxjylkgqo Abuegu Equipment: One touch IGF Chip conveyor Touchsetter 3-jaw chuck (Kitagawa B212)

Year of construction: 2001, condition: good (used), machine/vehicle number: KBK3, DEMAG KBK crane headliner crane runway dimensions approx. 20 x 9 m Track length can be combined variably !!! Any size is possible. Payload / lifting load 250 KG - 0.25to Technical data of the system: Crane runway made from Demag KBK2 rails, bridge made from KBK3 Mounting height variable, chain length approx. 4 m The system is delivered complete: -KBK rails, rail connectors - Undercarriages, end plates, cable towing, holders/hangers, etc including bridge with Demag 0.25 to chain hoist Shipping by forwarding agency possible, collection preferred Demag KBK1 KBK2 and KBK3 rails are stock items! Dispatch by forwarding agent, please ask for postal code. Please ask for other dimensions or shipping prices, we will make you a non-binding offer immediately! Pgsdpfx Abjhvpzheuju

Year of construction: 2006, condition: good (used), machine/vehicle number: WIZ, Payload / lifting load 500 KG - 0.5 tons Technical data of the system: Crane runway made from Demag KBK2 rails External dimensions of steel construction (space required) 13.2 x 5.5m Height of steel construction 4.85 m, UK steel construction 4.65 m UK runway crane 4.4m, UK bridge 4m, hook height 3.8m Support spacing 4 + 4 + 4.9m The system is delivered complete: KBK rails, rail connectors Undercarriages, end plates, drag cables, holders/hangers, etc + complete steel construction (HEA180) incl. Demag DC 500KG chain hoist Pgodpfx Abeiwdaqeuou Crane is dismantled and available immediately Item location is 75053 Gondelsheim Good condition, see pictures (contaminated by oil mist - can be easily cleaned) Dispatch by forwarding agent or pick-up only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items!

Condition: used, Year of construction: 2007, working width 1380 mm workpiece height 70 mm total power requirement 45 kW Pgedpfxot Hw Iis Abuju weight of the machine ca. 5.500 kg

Condition: repair required (used), Location: 49838 Langen Pgjdpfouqy Tpsx Abuou

Condition: good (used), Year of construction: 1992, Temperature controller, temperature control unit, temperature regulator, modular temperature control unit, tool heater -Manufacturer: PSG, temperature control unit for tool heating with up to 8 control zones -Type: RSD II 8 -P max: 21 kW -Dimensions: 490/400/H490 mm -Weight: 30 kg Pjdepwngbopfx Abuogu

Year of construction: 2010, condition: excellent (used), machine/vehicle number: MBHF-4BR125, DEMAG KBK crane sky crane runway dimensions approx. 33x6.5m + 4 cranes Payload / lifting load 4x125 KG - 0.125to The crane can also be halved in length Technical data of the system: Crane runway made from Demag KBK2/KBK2T rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, trailing cables, power supply, holders/hangers, etc. incl. 4 bridges with 125KG chain hoist 3x Demag DC-COM + 1x steel Crane is dismantled and available immediately Very good used condition, see pictures Item location is 75053 Gondelsheim Dispatch by forwarding agent or pick-up only by appointment Pjdpfx Abjm Tvvisujgu Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please inquire about your crane runway with cantilever load and dimensions.

Condition: ready for operation (used), Endress + Hauser FDL 30-FGB2A7R Liquiphant II level sensor, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Pgedpfxji D Ur Aj Abueu