Used Scheer Db 5 Z for sale (71,905)

Condition: used, mileage: 656,000 km, power: 290 kW (394.29 HP), first registration: 06/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2024, color: silver, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 3,650 mm, loading space volume: 84 m³, loading space length: 8,100 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * Through-loading device into the trailer * Frigoblock EK 25 U refrigeration unit * Driving operation with generator + 380 volt stationary operation * 2,000 kg tail lift * Medium-length cab * Automatic gearshift * Constant throttle * Euro 6 * Adaptive cruise control * Lane departure warning system * Navigation system * Differential lock * Full air suspension * reversing camera * Spoiler * Automatic air conditioning * Heated seats * Aluminum floor * Interior load compartment 8,100 x 2,480 x 2,200 mm * Tires front + hi. 385/55 R 22.5, mi. 315/70 R 22.5Only available as a train with Delivery only with matching trailer: * Flap at the front for loading into the truck * Drawbar pneumatically extendable * Frigoblock refrigeration unit EK 25 U * Drive mode with generator + 380 volt standby mode * 2,000 kg tail lift * Manufactured by Wüllhorst * Interior loading space 7,350 x 2,480 x 2,200 mm * 18,000 kg . * EZ 06/2018 * SAF axles * Disc brakes * Air suspension The price includes the truck and the trailer as a complete train. Several trains available, from year of construction 2015 - 2018---- Special equipment: Axle load front axle 8.0 t, Airbag driver's side, Audio system: CD radio (Bluetooth), Exhaust to bottom right, Battery 220 Ah, Brake connection standard and DuoMatic, Compressed air connection in cab, Compressed air tank aluminum, Compressed air unit high, Driving assistance system: Lane departure warning system, Tinted windscreen with band filter, Vehicle without trailer coupling, Generator 150 A, Info display 12.7 cm with additional display, Communication interface, Air compressor 2-cyl, Engine output front with preparation Frigoblock, Engine brake reinforced, Parameterizable special module, Reversing alarm acoustic (warning signal outside), Switch tail lift, Automatic circuit breaker, Seats in cab: Driver's seat Swivel seat comfort, Sun protection roller blind side window, Driver's door, Voltage transformer 24V / 12V 10 A, Steel rims 11.75x22.5 (on trailing axle), steel rims 11.75x22.5 (on front axle), additional 24V socket in passenger footwell, preparation 2nd control unit for level control, preparation CB radio, preparation cool box / refrigerator, additional heat insulation, additional heating (water) Further equipment: EURO 6 emissions standard, axle configuration: 6x2, trailer brake 2 - line, left-hand connections, trailer socket 24V / 15-pin, Antos, exterior mirrors electr. adjustable and heatable, rear axle differential lock, cab: width 2.30 m, cab: hydraulic tipping device, cab: M ClassicSpace, cab: steel-sprung, standard, cab floor with engine tunnel 320 mm, suspension: air / air (full air), electric window lifter, 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 ltr, Manual lifting roof (steel), Rear axle disk wheel 440, Body/structure: Chassis, comfort locking system, fuel tank: 290 ltr. aluminum, unregulated power steering pump, lift device trailing axle, air intake from front, engine 10.7 ltr. - 290 kW R6 diesel (OM 470), engine compartment encapsulation, trailing axle with single tyres, ramp mirror, spare wheel, residual heat utilization, front and rear axle disc brakes, seat cover/upholstery: fabric, seats in cab: Passenger functional seat, Front splash guard, Front axle stabilizer bar, Additional stabilizer bar, Rear axle / trailing axle, 24 V cab socket, Tachograph / EC tachograph, Aerodynamically shaped underbody panelling, Front underride guard, Preparation for toll collection, Cranked front axle Ledpfx Aevcudkeifshi

Condition: like new (used), Max. pressure: 10 bar Max. temperature: -10°C to 50°C Application: Pneumatic control Width: 40 mm Depth: 195 mm Ljdpfxjzaz T Dj Aifjhi Height: 23 mm Weight: 228 g Condition: Like new

Condition: good (used), Sicom B163-5 Double-Head Binder Riveter Manufacturer: Sicom, Italy Very good condition, ready for production. Double head riveting machine to fit two rivets simultaneously on ring-binders, sample books and similar products. Cardboard thickness: 0.5-4 mm Maximum board size: 1000 x 900 mm Weight: 170 kg Lhjdezhkicjpfx Aifsi Pneumatic supply: 6-8 bar Automatic rivet feeding, material piercing, and mechanism crimping.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, New addition Hydraulic flat grinding machine, Z&B Ziersch FS 2045 T, year of manufacture 1988 Grinding area: 500 x 200 mm - Vertical spindle - my-Tipp feature: Feed - Electronic handwheel - Automatic feed - Digital display. Automatic transverse feed, continuous and intermittent. Lhsdpfx Ask Ufz Njifsi Micro-fine transverse adjustment - Magnetic table with demagnetization function. Hydraulic overhead extractor - Adjustable feet - Machine thoroughly checked - all functions are working - runs very smoothly! Electrical wiring diagram available. Price: ex warehouse - Subject to prior sale and errors.

Condition: new, Year of construction: 2025, Rotary Blades Model: WEIMA, GROSS, VECOPLAN Type: WL, WLK, GAZ, VAZ Year of Manufacture: 2025 Ledexw Nrbjpfx Aifshi New / Ready for immediate use 1. Blade 40x40x25 M12 (PC) 2. Blade 40x40x25 M12 (KR) 3. Blade 40x40x25 M14 (KR) 4. Blade 40x40x20 M12 (KR) 5. Blade 40x40x16 M10 (KR) We manufacture replacement blades and spare parts for crushers and shredders. Please specify the blade type when ordering.

Condition: new, Year of construction: 2025, Rotary Blade Model: LINDNER Type: ANTARES Year of Manufacture: 2025 Lsdpfexn Nvhjx Aifshi New / Ready for Use We manufacture replacement blades and spare parts for crushers and shredders. Please specify the blade type when ordering.

Condition: new, Year of construction: 2025, Cutting Knife Model: WEIMA, GROSS, UNTHA Type: ZM40, ZMK50, GZ40, RS40, RS50 Year of manufacture: 2025 New / ready-to-use part 1. 1Z-115 Knife 2. 2Z-115 Knife 3. 3Z-115 Knife Lhodpfxoxn H Saj Aifei We are a manufacturer of replacement knives and spare parts for crushers and shredders.

Condition: like new (used), functionality: fully functional, Dowel Hole Drilling and Inserting Machine SCHEER BS 5102-V The BS 5102-V is a powerful, electronically controlled machine designed for precise and efficient face-end drilling and accurate insertion of wooden dowels. It is ideally suited for industrial wood processing—especially in furniture and carcass production. Condition & Service: Condition: As new (completely overhauled & newly painted) Functionality: Fully operational Warranty: 12 months CE compliant / Dust-tested Main Technical Data & Features: Workpiece width: min. 60 mm / max. 1200 mm (Pendulum operation: max. 600 mm) Workpiece thickness: 15 – 60 mm Drilling depth: max. 45 mm Vertical stroke of the support: 7.5 – 50 mm Min. lateral drilling distance: 10 mm Drilling unit: 9,000 – 18,000 rpm (adjustable), 1.5 kW Drilling system: M10 external (Scheer system) Servo motor: 0.54 kW, max. 60 m/min feed rate Dowel size: 8 x 30 / 8 x 50 mm, DIN 68150 Form A Glue system: 1:1 diaphragm pump, max. 7 bar Glue container: spiral conveyor, 3.5 liter capacity Extraction connection: Ø 80 mm | Extraction airflow: 540 m³/h at 30 m/s Lhedpsunvg Tefx Aifei Clamping cylinders: 4 short-stroke cylinders (Ø 63 mm), angular clamping Power supply: 400 V, 50 Hz Machine Construction & Operator Comfort: Controlled X-axis with machine frame as workpiece support X-support with linear guide and rack-and-pinion drive Servo drive for feed system Clamping portal with 4 adjustable clamping cylinders—controllable in 2 groups Stop rulers: left, right, and center on the table Drilling depth and dowel projection are adjustable directly on the support Offcut Unit & Safety Systems: Safety hood locking Lamella safety curtain Integrated extraction channels Control & Operation: PC with Siemens PLC controller User interface: WP-Studio—dialog-oriented programming Operating system: Windows 10 Display: 17" color monitor Separate workpiece programs for left & right operating sides (mirrored possible) Glue quantity can be individually defined per program Network capable (LAN/WLAN), compatible with Windows, Linux, Mac, Novell Remote maintenance & software updates possible Optional Equipment: Y-axis: automatic adjustment of drilling and glue units Electronic glue monitoring: ensures controlled glue flow Additional drilling unit for surface-side drilling: • Drilling motor: 1.5 kW at 18,000 rpm • Drill feed: pneumatic • Drill stroke: max. 25 mm • Depth limit: via spindle & SIKO display • Drill distance from reference edge: 5 – 35 mm • Holder: M10 external, max. Ø 35 mm • Workpiece length: min. 70 / 90 mm Warranty & Reliability: We are convinced of the stability and manufacturing quality of our machines—that’s why you receive a 7-year warranty on the machine construction, especially on the supporting structure and guide mechanism. Excluded are electrical supply components as well as normal wear parts. Additionally, we provide a 1-year warranty on the complete machine (including control, hydraulics, pneumatics, etc.). Conclusion: This machine combines state-of-the-art control technology, high manufacturing quality, and user-friendly operation. Ideal for precise dowel hole drilling and automated dowel insertion—reliable and efficient for continuous operation. 📞 Contact us for an individual offer or to schedule a demonstration. Available from stock. Delivery, commissioning, and training available as options.

Condition: excellent (used), Year of construction: 1998, Weishaupt L5 Z/D oil burner Capacity: 15-100 kg/h Year of manufacture: 1998-2006, multiple units available Please arrange an inspection by phone. Ljdpfx Aeh Ibgpoifshi We prefer to sell to dealers, businesses, or for export. All information is provided without warranty, subject to errors and prior sale. The seller assumes no liability for typographical errors or data transmission errors. We will, of course, take care of all formalities. Loading possible.

Condition: used, mileage: 640,000 km, power: 290 kW (394.29 HP), first registration: 07/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: silver, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 3,650 mm, loading space volume: 84 m³, loading space length: 8,100 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * Through-loading device in the trailer * Frigoblock EK 25 U refrigeration unit * Driving operation with generator + 380 Volt stationary operation * 2,000 kg tail lift * Medium-length cab * Automatic transmission * Constant throttle Lhedpfsy Trngex Aifji * Euro 6 * Adaptive cruise control * Lane keeping assist * Navigation system * Differential lock * Fully air-suspended * Rear view camera * Spoiler * Automatic climate control * Heated seats * Aluminum floor * Loading area inside 8,100 x 2,480 x 2,200 mm * Tires front + rear 385/55 R 22.5, middle 315/70 R 22.5 * Only available as a complete unit with trailer Only available with matching trailer: * Front flap for through-loading into the truck * Drawbar pneumatically extendable * Frigoblock refrigeration unit EK 25 U * Driving operation with generator + 380 Volt stationary operation * 2,000 kg tail lift * Manufacturer: Wüllhorst * Loading area inside 7,350 x 2,480 x 2,200 mm * 18,000 kg * First registration 07/2015 * SAF axles * Disc brakes * Air-suspended The price includes the truck and the trailer as a complete unit. Several units available, model year 2015 - 2018. Special equipment: Front axle load 8.0 t, Airbag driver side, Audio-navigation system Bluetooth comfort, Exhaust to the bottom right, Exterior mirror right with maneuvering position, Battery 220 Ah, Bi-xenon headlights, Brake connection standard and DuoMatic, Compressed air connection in the cab, Compressed air tank aluminum, Compressed air unit high, Compressed air horn, Windshield tinted with band filter, Vehicle without trailer coupling, Generator 150 A, Info display 12.7 cm with additional display, Air compressor 2-cylinder, Engine PTO front with preparation for Frigoblock, Engine brake reinforced, Parameterizable special module, Reversing warning acoustic (warning signal outside), Switch tail lift, Headlight cleaning system (SRA), Fuse box, Seats in the cab: Driver's seat comfort suspension seat, Sun blind side window, Driver's door, Voltage converter 24V / 12V 10 A, Steel rims 11.75x22.5 (on trailing axle), Steel rims 11.75x22.5 (on front axle), 24V socket in the passenger footwell additionally, Preparation CB radio, Preparation cool box / refrigerator, Additional thermal insulation, Auxiliary heater (water) Additional equipment: Emission standard EURO 6, Axle configuration: 6x2, Trailer brake 2 - line, Connections left, Trailer socket 24V / 15-pole, Antos, Exterior mirrors electrically adjustable and heated, Differential lock rear axle, Driver assistance system: Lane keeping assist, Cab: Width 2.30 m, Cab: Tilting cab hydraulic, Cab: M ClassicSpace, Cab: steel-sprung, Standard, Cab floor with engine tunnel 320 mm, Suspension: Air / Air (full air suspension), Power windows, Gearbox 12-speed - Type: G 211-12, Urea tank (AdBlue): 60 liters, Lift roof manually (steel), Rear axle bevel gear 440, Body / structure: Chassis, Comfort locking system, Fuel tank: 290 liters aluminum, Steering pump unregulated, Lifting system trailing axle, Air intake from the front, Engine 10.7 liters - 290 kW R6 Diesel (OM 470), Engine compartment encapsulation, Trailing axle single-tired, Ramp mirrors, Spare wheel, Waste heat recovery, Disc brakes front and rear axle, Seat cover / upholstery: Fabric, Seats in the cab: Passenger functional seat, Splash guard front, Stabilizer front axle, Stabilizer additional, Rear axle / trailing axle, Socket cab 24V, Tachograph / EG control unit, Underride protection front, Underride protection aerodynamic

Condition: like new (used), functionality: fully functional, Stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent, like-new optical and technical condition, the device has been used very little. Fully functional—ready to use immediately. All machines are intended for commercial use, no DIY store scrap. Treppenwangenfräsgerät SCHEER TW 4 With this device, you can mill treads and risers very precisely and accurately. The hand crank even allows you to machine curved joint surfaces; you can also use it for recesses in other panel materials, such as worktops. Equipped with hardened guide rods, on which the cross support with router is mounted. Featuring ball bearing guide bushings, allowing the device to move very easily, accurately, and safely. The device can be clamped securely onto the stringer or similar workpieces using four screw clamps. The cross support has two stops each in both the longitudinal and transverse directions. Comes with two positioning angles. Complete with manual, tooling, and all accessories. Longitudinal milling travel: 750 mm; transverse milling travel has been increased from 75 mm to 320 mm, significantly expanding the machine's application range. To increase the milling travel, a new base frame made of aluminum profiles was manufactured. The modification work was carried out by a reputable engineering company. Everything works perfectly; this machine is a true one-off. Router SCHEER HM 16 Very good condition, with only minor signs of use. Very robust, thanks to triple-bearing router spindle. Accurate concentricity and flawless milling results. Lsdoyxr T Topfx Aifshi Precise column guidance and torsion-resistant milling table. Constant speed, even under heavy load. Equipped with high-performance motor (shows almost no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. The machine is suitable for the toughest continuous milling operations. Good visibility of the milling spindle; chips are blown away by a powerful fan. 220V, 1800W. Speed: 18,000 rpm. Fully functional. With M16 female thread mount.

Condition: excellent (used), For sale: high-quality face mill with indexable inserts ASF-35-45-20 mounted on an SK40 arbor. A professional tool for roughing and finishing operations, ideal for use in CNC machining centers and conventional milling machines. The cutter head's 45° approach angle ensures excellent cutting performance, longer insert life, and a smooth surface finish on the workpiece. • Type: face mill with indexable inserts • Model: ASF-35-45-20 • Mounting: SK40 / DIN 69871 • Approach angle: 45° • Number of insert seats: approx. 6–8 • Application: milling of steel, cast iron, stainless steel, and other structural materials • Condition: used – very good, ready for operation Ljdsxk T Igepfx Aifjhi

Condition: new, For sale: Professional Proval PA125DA pneumatic actuator with complete control equipment. The set includes a pneumatic actuator, IMI Herion solenoid valve, and J J limit switch box in ATEX version. The device comes from warehouse stock, in brand new and unused condition. Technical Data: Manufacturer: Proval Model: PA125DA Type: Double-acting pneumatic actuator Rotation angle: 90 degrees Operating pressure: 2 to 8 bar Connection: G 1/4 Temperature range: minus 20 to plus 80 °C Standard: ISO F07, F10 Equipment: IMI Herion solenoid valve 230V 50Hz Lodpjyvabxefx Aifehi J J ATEX IP67 limit switch box Complete set ready for installation Condition: New, warehouse stock Possible minor storage marks Price per piece

Condition: new, For sale: New Siemens electric motor Motor unused, warehouse condition No signs of use, fully operational, ready for work Technical data: Manufacturer: Siemens Model: 1LE16032AA434AB4 Z Power: 30 kW Rotational speed: approx. 2955 rpm Voltage: 400/690 V Frequency: 50 Hz Protection class: IP55 Energy efficiency class: IE3 Mechanical size: 200L Mounting type: B3 Lhjdpfjyv Inusx Aifji Robust industrial construction Ideal for industrial machinery, pumps, fans, and drive systems

Condition: excellent (used), For sale: Industrial electric motor with DC electromagnetic brake. Complete drive unit suitable for use in industrial machinery, overhead cranes, hoists, conveyors, and other equipment where shaft stoppage is required immediately upon power disconnection. The motor has been removed from industrial machinery. Visual condition is very good – standard signs of use, technically flawless. Lodpfxjyridbo Aifohi The electromagnetic brake ensures instant shaft stop and locking, a feature commonly used in drives requiring a high level of safety. Technical details: Motor manufacturer: Cantoni Motor type: 3-phase Power: 5.5 kW Voltage: 400 V Frequency: 50 Hz Speed: approx. 950 rpm Protection class: IP55 Insulation class: F Brake: DC (direct current) Braking torque: 150 Nm Brake supply: 180 V / 75 W Year of manufacture: 2018 Made in the EU PRICE IS PER PIECE.

Condition: new, For sale: brand new three-phase electric motor from renowned German manufacturer Motore Ehlert GmbH. The motor is factory new, kept in storage, never used. Visual and technical condition is perfect, ready for installation. Technical specifications: Manufacturer: Motore Ehlert GmbH Type: 1TZ9003 1AB53 4AB4 Z Power: 3 kW Rotational speed: 1460 rpm Voltage: 400V 50Hz Current: 6.2 A Efficiency class: IE3 Protection rating: IP55 Insulation class: F Size: 100L Mounting: IM B3 Weight: approx. 27 kg Application: Designed for industrial use, ideal for pumps, fans, production machinery, and other industrial applications. Ledpjyv R Nhefx Aifehi Condition: New

Condition: used, mileage: 796,179 km, power: 220 kW (299.12 HP), first registration: 02/2002, fuel type: diesel, number of seats: 54, gearing type: mechanical, emission class: euro3, color: green, brakes: retarder, Equipment: air conditioning, * Setra S 315 UL * Intercity bus * 54 seats * Manual transmission * Retarder * Air conditioning * Webasto * VIN: WKK62710113002870 * Mercedes engine * Engine type: CM457HIA * 6 cylinders * Euro 3 * kW: 220 * Displacement: 11,967 cc * Unladen weight: 12,650 kg * Gross weight: 18,000 kg * Wheelbase: 6,080 mm * Vehicle length: 12,000 mm * Vehicle width: 2,500 mm * Vehicle height: 3,340 mm * Tires: 295 / 80 R 22.5 * (ACCIDENT) Front slightly damaged * Windshield has a crack * Net price * All information provided without guarantee or warranty Lhedpfxsq Ra Nqj Aifsi Tel./WhatsApp:

Condition: new, Year of construction: 2024, functionality: fully functional, power: 1,800 kW (2,447.32 HP), Available directly from stock: Ledpfx Ajuubcteifohi 1700kW load bank for fixed installation. 400volt/50hz 6 steps of +/- 250kW 2 steps of +/- 125kW Other steps possible in consultation External control power supply 64Amp/400v/50hz Control via Modbus and HMI in the cabinet Equipped with its own circuit breaker in the casing. Can be extended with a motor. 20Ft container

Condition: good (used), Year of construction: 2012, AXA DBZ 2/50 double station machining center, Year of construction 2012, Siemens 840 control system, Travel X/Y/Z 2x800/600/600 mm, 16-position tool changer, SK 50 tool holder, Spindle speed up to 4,000 rpm, Lhedpfxsridf Uj Aifji Milling spindle - water-cooled hollow shaft motor, dir. Measuring systems, chip conveyor, heat exchanger, switch cabinet, oil mist lubrication, Rittal cooling system,

Year of construction: 2007, condition: excellent (used), EXTRUDEX EXTRUDER EN50-30D year 2007 no. 4101264, with melt pump, screen changer and 5 layer pipe head Year of manufacture 2007 As well as 4 co-extruders EXTRUDEX EN25-25D, year of manufacture 2007 Ledpjvyaxusfx Aifohi APPLICATION: Production of PE 5 layer pipes Max diameter 32 mm INVENTORY: 1 single-screw main extruder EN 50 4 co-extruders single-screw auxiliary extruders The extrusion system is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr 6, Germany

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 7,792 h, load capacity: 4,000 kg, lifting height: 5,650 mm, load center: 500 mm, fuel type: gas, DGUV certified until: 11/2025, fork length: 1,600 mm, tire condition: 95 %, empty load weight: 7,183 kg, color: yellow, We are offering an absolutely top-condition forklift from Jungheinrich. In 2021, it underwent a complete 5-star refurbishment by Jungheinrich and has only run 45 hours since the overhaul. The paintwork is 100% original—there has been no respray or touch-up! The forklift has always been stored indoors and is in excellent condition. Lsdpfx Aijw N Iz Hefjhi Maintenance and UVV inspection are up to date. The manual and keys are, of course, included. Last major service: October 2024 UVV valid until 10/2025 Operating hours: 7,792 (since refurbishment: 7,744) Model: TFG 540s SP G+E 120-565 DZ Type: LPG forklift Year of manufacture: 2012 / 5-star complete refurbishment 03/2021, equipped with Kaup fork positioner T466 Lifting capacity: 4,000 kg Lifting height: 5,650 mm Overall height: 2,640 mm Fork length: 1,600 mm Load center: 500 mm Mast: triplex with free lift Equipment: Solo-Pilot, road lighting (conforming to StVZO), LED version with 2 working lights front and rear each, front, cab roof, and rear windows Steel doors, leather seat, rear-view mirror, armrest, double auxiliary hydraulics (2 functions) Brand new Kaup fork positioner 4.8T 466B Since refurbishment, the truck has only accumulated 45 hours of operation, with all UVV and maintenance work carried out accordingly.

Condition: excellent (used), 25 vertical drills 25 horizontal drills Ljdpsy S Awcofx Aifjhi 2.2 kW upper motor 2.2 kW lower motor 100 cm ground clearance

Condition: refurbished (used), functionality: fully functional, Panel Dividing System PA 4115 – 3100 x 3100 DNC-AT Condition: Completely overhauled Warranty: 1-year warranty Technical Specifications: Left-angle stop according to AGA 4383 Longitudinal Saw FM 16-3100: - Hardened guides - Automatic forward and return travel of the saw unit - Return travel with automatic lowering - Feed speed: 2–50 m/min (stepless adjustment via potentiometer) - Return speed: 70 m/min (rapid traverse) - Integrated extraction channels in the machine base and pressure beam - Scoring saw adjustable from outside (without opening the safety hood) - Saw unit with controlled DC drive: - Precise positioning (e.g. for cutouts) - Slowed extraction from the cut - Includes safety hood locking, SZ 5008 lamella curtain - Offcut device SP 5004 – Offcuts down to at least 5 mm - Main saw motor: 7.0 kW - Scoring saw motor: 1.1 kW (can be switched off separately) - Cutting length: 3100 mm - Cutting height: 70 mm - Dust tested: Threshold of 2 mg/m³ is significantly undercut - CE compliant Angle Pressure Device WP 5003: Lodjxhg Ibepfx Aifehi - With pressure claw for cross cuts - Adjustment range up to 2400 mm - Semi-automatic function Material Feed Table HP 5021 (mounted at rear of FM 16): - Parallel fence with 6 spring-loaded clamping fingers - Direct drive of material pusher via servo motor - Table surface with closed Pertinax panels (suitable for narrow strips) - Feed speed: 25 m/min (safety limited) - Return speed: 40 m/min - Table length: 3100 mm - Stop depth: 3100 mm Multi-microprocessor control Integrated PC with hard disk Operating system: LINUX Interfaces: serial + parallel, USB Network connectivity (also wireless LAN) Optimize cutting plans in the office and send directly to the machine Multitasking capable Printing function via USB Remote maintenance via Internet (Remote Desktop, TeamViewer) Multilingual dialog programming 15” flat screen + multifunctional keyboard Swiveling control panel Graphical representation of cutting plans and work processes Additional Equipment: Angle Stop Table HP 5043 (front mounted): - Machined steel angle, Pertinax table top - Table size: 1800 × 800 mm Workpiece Support Table HP 5025 (front mounted): - Pertinax surface - Table size: 1800 × 800 mm Air Cushion Device LK 5030 - Integrated into HP 5043 and HP 5025 Accessories: - 1 Circular saw blade KSB 4005 – Ø 305 mm, Z=60 (for main saw) - 1 Circular saw blade KSB 4006 – Ø 200 mm, Z=60 conical (for scoring saw)

Condition: new, Year of construction: 2025, Z-MaT DT500E-S, Siemens 828 D ShopTurn 15" Touch CNC Turning Center, with Sub-Spindle, Driven Tools, and True Y-Axis, 35° Slant Bed Max. Swing Diameter: 650 mm Max. Turning Diameter: 320 mm Max. Turning Length: 550 mm Linear Roller Guides on All Axes Rapid Traverse X/Z/Y: 20/20/12 m/min Y-Axis Travel: 140 mm, +/- 70 mm Turret: 12 Stations BMT55 — 12 Driven Positions Max. Turret Speed: 4000 rpm, 3 kW Main Spindle: Chuck Diameter: 254 mm Spindle Nose: A2-8 Max. Bar Capacity: 75 mm Spindle Bore Diameter: 86 mm Spindle Drive Power, Direct Drive: 15/16 kW Max. Spindle Speed: 3500 rpm Sub-Spindle: Chuck Diameter: 152 mm Lsdpfx Aowwvldoifshi Spindle Nose Standard: A2-5 Max. Bar Capacity: 46 mm Drive Power: 11 kW Max. Speed: 3000 rpm Dimensions (W x D x H): 3.1 x 2.0 x 2.25 m Weight: 5.3 t Standard Equipment: Parts Catcher (Preparation) Hinged Belt Chip Conveyor Oil Skimmer Coolant System 3-Color Warning Light Work Area Lighting Centralized Lubrication System Programmable Tailstock Set of Soft Jaws Tools and Toolbox CE Conformity Operating Manual The machine will be exhibited at EMO, Hall 12/D10 and will be available immediately afterwards. A wide range of automation options is available, such as bar loaders and loading robots.

Condition: new, Year of construction: 2025, Z-MaT TN500-450 Siemens 828 D ShopTurn, 15" Touch 35° Slant Bed, CNC Turning Center, with Tailstock C-Axis, hydraulic brake with driven tools, Linear roller guides on all axes with linear robot and magazine Max. Swing Diameter: 550 mm Max. Turning Diameter: 360 mm Max. Turning Length: 450 mm Rapid Traverse X/Z: 20/20 m/min Turret: 12 stations, BMT45 of which 12 are driven Max. Turret Speed: 4000 rpm, 3 kW Spindle Chuck Diameter: 254 mm Spindle Nose: A2-8 Max. Bar Capacity: 75 mm Spindle Bore Diameter: 86 mm Drive Power, Direct Drive: 22/30 kW Max. Spindle Speed: 3,000 rpm Tailstock Diameter: 110 mm / MT 5 Tailstock Quill Stroke: 100-500 mm Dimensions (W x D x H): 2.8 x 1.7 x 1.9 m Weight: 4.8 t Standard Equipment Hinged belt chip conveyor Oil skimmer Coolant system Three-color warning light Lhsdpfswwv Tujx Aifei Work area lighting Central lubrication system Programmable tailstock Set of soft jaws Tools and toolbox CE compliance Operating manual Machine with linear loading robot Video shows the linear loading robot with another machine The machine will be exhibited at EMO Hall 12/D10, and is available for immediate delivery afterwards.