Used Schlatter Mesh Welder for sale (940)

Condition: used, Year of construction: 2008, throat depth: 680 mm, nominal power at 50% duty cycle: 45 kVA, input voltage: 400 V, Combined roll seam and spot welding machine, type UN63 - Roll seam welding - Rated voltage 400V/50Hz - Rated power 45kVA - Welding current 15kA - Fuse rating 125A Dwsdpfxszh Izce Anzsa - Outreach 670mm - Arm spacing 350mm - Electrode force 500daN - Stroke approx. 30mm - Control unit TE500 with 99 welding programs, parameters for each program, digital current display after each weld, current monitoring, stepper function - Language selection: German, English, Italian, French, etc. with operating manual - 2-stage foot switch according to UVV standards - Main machine switch - Pneumatic maintenance unit - Weight approx. 680kg - Documentation with wiring diagram, compressed air diagram, and cooling water circuit - VAT can be shown separately - Spot welding fixture / electrode holder and lower arm available at an additional cost The system is located in Dresden, near the A17 highway, and can be inspected and demonstrated by appointment. On-site commissioning is subject to a fee, billed based on actual effort.

Year of construction: 2007, condition: used, THERMATOOL High Frequency Welding CFI 350 kW VF Including selectable frequency, in steps of 1kHz, range 180-300 kHz Fully revised in 2026 by Thermatool specialists Technical specifications · Input voltage: 3 x 380 V · Input current: 525 A · Welding frequency: 180 - 300 KHz · Output power: 350 kW · Auxilirary service voltage: 24Vdc · PLC Siemens S7 1. DC Power supply • SCR Power Controller/Stabilizer - Provides constant output power for consistent weld quality. • Rectifier Circuit achieving 6 pulse Rectification. • Solid State Low Ripple Filter - Reduces AC line harmonics and switching transients that can affect weld quality. • AUTOMATIC SPEED POWER CONTROL Automatic Speed Power Control - Automatically ramps power up and down in line with mill speed, minimizes scrap on stopping and starting. • PLC - Controls and monitors welder operation sequences and provides fault and running data for the Alphanumeric display 2. CFI 350KW VF Solid-state HF welder • Compact rugged enclosure - sealed and internally cooled. Provides small footprint whilst ensuring reliable performance in harsh mill environments. • Water cooled high frequency MOSFET power transistor modules – Modular design provides maximum flexibility, long equipment life and reduces time for maintenance. • AUTOMATCH Automatic Load Match – Fully automatic series and parallel load matching system which enables the welder to run at optimum efficiency with guaranteed frequency stability - Assists the tube producer in maintaining repeatability. • High frequency capacitor bank - Designed specifically for the Tube Welding application. Capacitors deliver high power with low voltage to minimize flashovers at the induction coil. • Water flow and temperature protection. • Output bus-bar system - Externally water-cooled for ease of maintenance. INCLUDING SELECTABLE FREQUENCY Selectable frequency, in steps of 1kHz, range 180-300 kHz 3. Remote control console • Display - provides operator and maintenance personnel a constant display of fault and running data for maximum productivity. • Power Control - Preheat and Main power potentiometers ensure precise setting of weld power and minimizes un-welded tube thus reducing scrap. • Pushbuttons and Control Switches - For safe simple operation and protection of plant personnel. Analogue Indication Meters - Provide back-up for Alpha Numeric display. 4. Closed loop cooling system Dsdjymadbjpfx Anzewa • Plate Type Heat Exchanger - High efficiency reducing raw water consumption. • Stainless Steel Water Pump & Plastic Pipework • Automatic Temperature Control Valve - Maintains a constant water temperature thus avoiding condensation inside the equipment. • Header tank with Level Switch. Comprehensive equipment inspection, supervised by a Thermatool specialist. Input voltage: 3 x 380 V Input current: 525 A Welding frequency: 180 - 300 KHz Auxilirary service voltage: 24Vdc PLC: Siemens 7

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: A32404019520, type of input current: three-phase, input voltage: 230 V, overall weight: 53 kg, type of cooling: air, laser power: 1,500 W, shaft length: 1,080 mm, continuous power: 1,500 kW (2,039.43 HP), Equipment: documentation/manual, head guard, type plate available, Operation - Simplest operation via synergy characteristic curves - Achieve finished welding results in just three steps. Automatic adjustment of power, wire feed, oscillation width, oscillation frequency, laser frequency, PWM, hot start, etc. - High-resolution display ensures optimal readability of all necessary parameters. An integrated help function provides a better understanding of the adjustment options - Fully integrated operation in the wire feed cabinet – optional operation via machine or wire feed system Dwodpfx Anoyuvktjzoa Technical Features - High-performance laser cells paired with gas-cooled torches ensure maximum power and focus stability - 2-in-1 machine: Welding and cleaning. Laser cleaning is ideal for paint removal, rust removal, and scale removal - Optional: Dual wire feed Safety - Two-channel emergency stop system - Two-channel safety interface for access control (door contact switch) - Key switch to prevent unauthorized use - Two-channel fiber break detection as well as monitored QBH connection - Safety notices and manual activation of laser release at every start - Dual-action button prevents unintentional activation of the laser - Suitable for heavy-duty applications Advantages of Laser Welding Compared to Conventional Welding Methods - Minimal distortion, extremely fast, outstanding quality (even with very thin materials < 1 mm) - Consumes approximately 70% less energy - Quick and easy to learn - High process reliability - Extreme time savings with significantly reduced rework - One of the lightest torches on the market, weighing approx. 680 g - Two-channel safety circuit for maximum safety Advantages of Craft-Laser - Laser cleaning with up to 100 mm scanning width and autofocus - 2-in-1 machine: welding and cleaning - Full synergy – no more parameter lists - Service-friendly – no more inconvenient shipping required

Condition: excellent (used), Mesh Belt Conveyor Stainless Steel Belt dimensions 1600mm x 600mm Control box with stop/start, variable speed control, manual / automatic switch Dsdpfx Aoiu H Sdjnzjwa Underneath tray collection facility In excellent condition

Condition: good (used), Approx. 105 Euro mesh boxes, – used -: Dwjdjw Hqauepfx Anzja Only bulk purchase: Price per unit ex location: €69 (net)! Manufacturer: unknown Type: unknown Year of manufacture: unknown Dimensions, approx.: L: 1m, H: 0.65m, W: 0.80m Dead weight: approx. 43.5kg Condition: good Available: immediately Location: 67346 Speyer

Condition: good (used), Approx. 130 Euro mesh box pallets, stackable – used: Dodpow Acyfofx Anzjwa Price per unit ex location: Purchase up to 50 units: €79 (net), Purchase over 50 units: €75 (net), Manufacturer: unknown, possibly various Dead weight: approx. 70–85 kg Load capacity: approx. 900 – 1,500 kg Maximum stacking load: max. 6,000 kg Loading volume: approx. 0.75 m³ EPAL marking Dimensions, approx.: Length: 1,200 mm Width: 800 mm Height: 970 mm One long side half-drop-down Condition: good Available: immediately Location: D-06766 Bitterfeld-Wolfen

Condition: used, TECHNICAL DETAILS Dsdpjuhaa Nofx Anzswa - Quantity : 3 - As per photo - Unit price : 2000 € HT

Condition: used, TECHNICAL DETAILS Quantity : 6 Price per unit : 2000 € HT Dwjdpeuhaa Aofx Anzea

Condition: used, Spot Welding Machine DALEX Type SL 16 - 2 Machine No. ZZH/N-10183 Year of manufacture: approx. 2002 Rated power at 50% duty cycle: 16 KVA Maximum welding power: 50 KVA Max. throat depth: 500 mm Max. electrode force: 17 - 278 daN Electrode arm Ø 45 mm Electrode holder Ø 25 mm Arm spacing: 150 mm / 300 mm Operating pressure: 1–6 bar Open circuit voltage: up to 3.6 Volt Connected load: 37 kVA Mains connection: 400 Volt, 50 Hz - Weld control MPS 200-003 - Welding cycle triggered via electric foot switch - Water-cooled Required space (L x W x H): 1100 x 720 x 1450 mm Weight: 230 kg Very good condition Dwodpfxjy N Duke Anzoa

Year of construction: 2016, condition: ready for operation (used), A custom-built Nordgreif mat gripper for reinforcing steel is available. Load capacity: 6000kg, gripping width range: 2100mm-2520mm, max. opening width: approx. 2660mm, length: 5080mm, mat hooks: 2x3, mat length range: 5100mm-8100mm, mat width range: 2100mm-2520mm, mat height range: 150mm-800mm. Documentation available. An on-site inspection is possible. Dedpfx Aozcflvonzowa

Condition: used, Transport trolley Mesh trolley Order picking 1060x800x1900 capacity RA2408 Technical data: Length: 1060 mm Width: 800 mm Height: 1900 mm Shelf length: 1040 mm Shelf width: 740 mm Shelf height: 290, 680, 1070, 1480 mm Wheel diameter: 200 mm Configuration: 2 steering and 2 fixed castors Year of manufacture: unknown Dsdowh Dilepfx Anzewa Condition: Used / fully functional Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 3286502, overall weight: 5 kg, input voltage: 230 V, The DGYF 500C induction sealer is used for induction-electromagnetic sealing of aluminum caps under bottle caps. Key features: • Suitable for use with plastic or glass containers. • Very easy to operate. • Handheld device for small-scale applications. • Easy to transport; requires no dedicated workspace. Dwjdpfx Aney S Rxhszsa • Packing speed of approximately 20-40 units/minute (depending on the operator and the product being sealed). • Maximum container diameter: 60-130 mm. • Maximum distance between the inductor and the container: 3 mm. • Activated by a switch on top of the inductor. Control panel: • On/Off switch. • Fuse. • Digital display indicating current intensity. • Digital display indicating time. • Overheat protection – the device automatically shuts down until it cools down. The induction sealer comes with sealing foil, 85 mm in diameter, 2 packs of approximately 400 pieces each.

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced Dwjdpfx Answf Rg Eezea annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V Dwjdpfjwf Rgxox Anzoa --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary Dedjwf Rgrspfx Anzewa welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: good (used), 1 used, well-maintained, water-cooled MIG-MAG welding machine Manufacturer: RÖWAG Model: KGL 450-2 Technical data: Welding current range up to 450 A Weight approx. 200 kg Accessories / Special features: - Water cooling Dwedpfx Ashy Tmzsnzsa - Separate wire feeder with 4-roller wire feed - Incl. hose set, pressure regulator and ground cable without the welding wire spool shown in the picture! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Condition: excellent (used), Year of construction: 2021, DMU LASER TECH Fiber Laser Welder Dwedpfx Aev Amxmsnzoa Like new - Year 2021 CE. 1 Kw MT 1000P Complete with cable and torch.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Column-type spot welder PEI MOD. PBP 126 PX Year of manufacture: 2006 CE PEI POINT pneumatic spot welders are user-friendly and ideal for welding all types of metals. This machine is foot pedal operated with pneumatic drive and offers a maximum welding power of 25 kVA. The machine is also equipped with water-cooled electrode holder, electrodes, arms, and transformer. Dsdpow T Tlfefx Anzowa The upper arm is depth-adjustable and the lower arm is height-adjustable. Used • Pneumatic foot pedal operation • Maximum welding power: 25 kVA • Maximum capacity: 2.0 mm • Electrode force: 165 dan • Throat/Arms: 580 mm • Depth-adjustable upper arm • Height-adjustable lower arm • Steel frame • 400 V, 50 Hz

Condition: used, Oscillator tubes (triodes) for HF Welders : Dwodpfevtp Huox Anzoa - BW 1608J2F-R, made E.E.V. : NEW - BW 1185J2, made E.E.V :

Condition: refurbished (used), Year of construction: 2025, JAGER welded mesh line U-Gsa-st Full revamped "as new" Technical data 24 pay off for longitudinal wire spools, longitudinal wire straightening equipment Line wire pull off system Longitudinal wire loop Longitudinal wire straightening equipment Cross wire magazine Number of installer line wires : 24 up to 10 mm Diameter of lines wires : 4 to 10mm Dodpfewu Dcxsx Anzjwa Diameter of cross wires : 4 to 10mm Separation between line wires : 100, 150, 200, and 300 mm Separation between cross wires : min 30 mm , steplessly programmable Max. length of cross wire (mesh width) 2500 mm , max welding width : 2400 mm Mesh length : min 3000 mm and max . 6000 mm Trafos : 8 x 160 Kva Number of installer line wires: Number of installer line wires : 24 up to 10 mm Diameter of lines wires: 4 to 10mm Diameter of cross wires: 4 to 10mm Separation between line wires: 100, 150, 200, and 300 mm Separation between cross wires: min 30 mm , steplessly programmable Max. length of cross wire (mesh width): 2500 mm Max welding width: 2400 mm Mesh length: 3000 - 6000 mm Trafos: 8 x 160 Kva

Year of construction: 2016, condition: used, THERMATOOL CFI 200 HF Welder for tube production, 200 kW solid-state high frequency welding system, manufactured in 2016. THERMATOOL CFI 200 HF Welder, designed for reliable high-frequency welding applications with advanced automatic load matching AUTOMATCH and THERMAVIEW remote control. With interconnecting cables, it is ready for re-installation. In excellent worling conditions. TECHNICAL SPECIFICATIONS - Manufacturer: THERMATOOL - Model: CFI 200 - Year: 2016 - Continuous Output Power: 5 - 200 kW - Nominal Welding Frequency: 400 kHz - Total System Power: 307 kVA - Input Voltage: 400 V - Input Frequency: 50 Hz Dedpezi Twrofx Anzewa - Input Current: 464 A - Control Voltage: 110 V SCOPE OF SUPPLY HF CABINET - Compact Rugged Enclosure Design - Water Cooled High Frequency Power Transistor Modules - High Frequency Capacitor Bank - Single Axis Table. - Water Flow and Temperature Protection - ‘Automatch’ - Automatic load matching system - Output Weld Lead Assembly DC CABINET Power Supply - SCR Power Controller/Stabiliser - Solid State Low Ripple Filter - Automatic Speed Power Control - Heavy Duty Power Transformer THERMAVIEW Remote Control Console - PC Panel with Thermaview software - Power Control - Pushbuttons and Control Switches - Analog Indication Meters OUTPUT BUSBAR - Straight output busbar CABLES / PIPING - Existing interconnecting cables - Existing distilled water interconnecting piping WORKCOILS - 5 workcoils in the range 25 – 76.2mm BENEFITS ✓ Solid-state technology for reliable operation ✓ Automatic load matching to optimize welding performance ✓ Integrated THERMAVIEW control for convenient operation and monitoring ✓ Suitable for a wide range of tube diameters with five included work coils ✓ Designed for efficient production and dependable welding performance For more information, contact Continuous Output Power: 5 - 200 kW Nominal Welding Frequency: 400 kHz Total System Power: 307 kVA Input Voltage: 400 V Input Frequency: 50 Hz Input Current: 464 A Control Voltage: 110 V

Condition: excellent (used), Angle welding machine Make: Meurer Model: CM/W3 Djdpfx Anox Tpf Njzowa Year of manufacture: 2002 Welding frame: 460 x 700 mm 220 volts Length: 1950 mm Depth: 770 mm Packing table height: 870 mm

Condition: excellent (used), Welding current max.: 5kA Welding force: 45-150N Closing stroke: pneumatic Welding pressure: pneumatic, resetting unit with disk spring Force adjustment: Proportional valve Electrode shape: cylindrical, 6mmØ --- Welding control: optional (according to recommendation) --- equipped with: - Base body with welding heads on aluminum - Modular design - Electrodes top and bottom with feed cylinder - Welding head top F120K with repositioning unit - pneumatic valve units - Pneumatic air cooling unit for electrodes - Workpiece carrier on dovetail guide, for exact positioning to electrodes positioning to electrodes --- Warranty 6 months --- Dwodpfstq Ez Ejx Anzja Training + commissioning on request --- Spot welding electrodes + spare parts available from stock --- Further information on our homepage

Year of construction: 2000, condition: used, TIG welding machine, DC, 380 volts, for stainless steel. Arkoquad 220, 40% duty cycle at 220 amps, 10% duty cycle at 140 amps, with torch. Ground cable, pressure reducer, water cooling. Dedpfx Ansgt Auuozjwa

Condition: used, MIG / MAG Pulse Inverter Shielded Gas Welding Machine FRONIUS Type TransPulsSynergic - TPS 330 Item No.: 4.075 Serial No. Year of manufacture: approx. 2000 Output: 330 amps = 50% duty cycle 300 amps = 60% duty cycle Dwedoyxy Tbopfx Anzoa 210 amps = 100% duty cycle Infinitely adjustable output range Open-circuit voltage: approx. 50 volts / approx. 30 volts Power supply: 400 V, 50 Hz, 32 A plug - Digital display for voltage and current - Pulse welding function - Various welding programs selectable Welding processes: MIG/MAG/TIG (program and manual operation) 2-stroke, 4-stroke, 4-stroke special and spot welding - Separate 4-roller wire feed unit FRONIUS Type VR 152 with approx. 1.5 m connection hose package - 4 meter hose package NEW, with FRONIUS central connection - external Fronius water cooling unit Type FK 71 - Welding gas pressure reducer NEW - Equipped with 1.2 mm welding wire Required space (L x W x H): 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition – fully functional – ready for demonstration Also suitable for TIG and electrode welding. Accessories for TIG and stick electrode welding are not included in the scope of delivery.