Used Siebert 300 Kn Winch for sale (15,279)

Condition: new, Rexroth KDS 1.1-100-300-W1-220 MNR: R911220055 SN:KDS111-763942-027, unused in original packaging, 100% functional, scope of delivery as per photos Codpei Ecznjfx Aa Herc

Condition: ready for operation (used), Indramat KDA 1.1-100-300-W1-220 AC. Mainspindle Drive, serial no. according to photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos. Credpfx Aaji Ebgye Hsc

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1 Controller SN:5765 , professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos Crjdpfsi Ebhpox Aa Hsc

Condition: ready for operation (used), Indramat KDS 1.3-100-300-W1 Controller SN:253759-02028, used, normal signs of use, 100% functional, scope of delivery as per photos Cjdpsi Ebibjfx Aa Herc

Condition: ready for operation (used), Indramat KDS 1.3-100-300-W1 Controller SN:253759-02159, used, normal signs of use, 100% functional, scope of delivery as per photos Cjdpfx Aoi Ebiusa Herc

Condition: new, Indramat TDM 1.3-050-300-W1-000 Controller SN:245687-03354, unused in opened original packaging, 100% functional, scope of delivery as per photos Credpfx Aei Ebpaoa Hec

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1-220 A.C. Servo Controller , serial no. according to photo ,used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos Crodpfx Aji Ebhtja Hsc

Condition: ready for operation (used), Indramat KDS 1.3-100-300-W1 Controller SN:253759-02025, used, normal signs of use, 100% functional, scope of delivery as per photos Crodpfxji Ebh Ts Aa Hjc

Condition: new, Indramat KDV 2.2-100-220 / 300-W1 Power Supply, SN:234691-00754 A08R1, unused in opened original packaging, 100% functional, scope of delivery as per photos Crodpfx Aasi Ebi Re Hjc

Condition: ready for operation (used), Indramat TDM 1.2-030-300-W0 AC. Servo Controller, serial number as per photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Csdpfx Aaei Ebmuj Horc

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1-220 AC. Servo controller, serial no. according to photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos. Cjdpfx Aji Ebhwoa Horc

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1 AC. Servo controller, serial no. according to photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos. Codpfxoi Ebhhs Aa Herc

Condition: ready for operation (used), Indramat KDV 1.3-100-220/300-W1 Power Supply SN23226473930903, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photo Crsdpfx Aei Ebi Aea Hoc

Condition: new, Indramat KDV 2.2-100-220 / 300-220 Power Supply, SN:234691-02932, unused in opened original packaging, 100% functional, scope of delivery as per photos Csdpfxsi Ebi He Aa Hsrc

Condition: used, loading : 75 to 80 % 2,77 kW Crodpfx Aaoy U E S Us Hoc tiltable drum with 2 arms pneumatic: 6 bar outside dimensions (l x w x h) : ± 2.110 x 1.100 x 1.650 mm

Condition: new, new ! all stainless steel 2 speeds (20 and 40 rpm) Credpfxsy U E Sue Aa Hoc 2 mixing directions 3,3 / 4,4 kw inspection gantry safety lid CE-approved Suitable for loader with “Easy Connect” overall dimensions (l x w x h) : 1.750 x 950 x 1.650 mm (open lid: H: 2.100 mm) infeed height : ± 1.350 mm dimensions drum : (l x w x h) : ± 860 x 670 x 565 mm + Loader for eurobins

Condition: used, maximum load weight: 33,500 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2019, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2019, Refrigeration unit brand: Thermo King Additional information: * Unladen weight: 8,500 kg * Type | First axle: Continental R * Tyre size | First axle: 385/55 R22.5 * Tyre tread depth, inner left | First axle: 50% * Tyre tread depth, inner right | First axle: 50% * Maximum axle load | First axle: 8,000 kg * Type | Second axle: Continental R * Type | Third axle: Continental R Cjdpfx Aaow Iupho Horc * Tyre size | Second axle: 385/55 R22.5 * Tyre size | Third axle: 385/55 R22.5 * Tyre tread depth, inner left | Second axle: 30% * Tyre tread depth, inner left | Third axle: 30% * Tyre tread depth, inner right | Second axle: 30% * Tyre tread depth, inner right | Third axle: 30% * Maximum axle load | Second axle: 8,000 kg * Maximum axle load | Third axle: 8,000 kg * Position | First axle: Rear * Make | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Lift axle | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Make | Second axle: Other * Make | Third axle: Other * Brake type | Second axle: Disc brakes * Brake type | Third axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension Additional equipment: * Rear doors * Homepage * Lift axle * SemCollection * SemStars Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please enquire in advance regarding the costs and procedures applicable in your country Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to change, prior sale, and errors.

Condition: used, maximum load weight: 33,375 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2017, next inspection (TÜV): 05/2027, Year of construction: 2017, The stated prices exclude BPM (Dutch tax on private motor vehicles) and apply only to export. Credszbf Tkopfx Aa Hoc

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, total height: 700 mm, total width: 570 mm, total length: 500 mm, overall weight: 25 kg, table width: 305 mm, table length: 305 mm, table load: 25 kg, ambient temperature (max.): 50 °C, ambient temperature (min.): 5 °C, maximum load weight: 25 kg, Equipment: documentation/manual, type plate available, Renishaw Equator 300 Versatile Gauge Machine Type: Co-Ordinate Measuring Machine/Versatile Gauge Cedpfx Aajxyungo Hjrc Year: 2020 Condition: Excellent Condition Includes Equator Shopfloor Controller Kit Equator SM25-2U Probe Kit Equator Joystick Kit Equator Power Cable UK Modus Equator Equator Enclosure Kit Equator Gauge Checker Kit M6 EQ33 Modular Fixture Plate x 2 SH25-2A Stylus Holder x 3 Styli x 2 IPC Dongle with one Licence Technical Specification Working Volume X & Y: Ø300 mm Working Volume Z: 150mm Working Volume Height from Base: 55mm Machine Weight: 25kg Dimensions(without enclosure): 570 x 500 x 700mm Comparison uncertainty*: ±0.002 mm Probe type - scanning: Renishaw 3-axis SP25 analogue scanning Maximum scanning speed: (SP25) 200 mm/s Scanning rate (SP25): 1000 points/s Probe type - touch-trigger: Renishaw 3-axis TP20 kinematic touch-trigger Recommended touch speed (TP20): 10 mm/s Maximum movement speed: 500 mm/s Scale resolution: 0.0002 mm Fixturing requirement*: ±1 mm Machine air supply requirement: No air required Operating temperature: +5 °C to +50 °C Storage temperature: -25 °C to +70 °C Relative humidity operating range: Maximum 80 %RH at 40 °C, non condensing Machine electrical supply requirements: 100-240 V AC ±10 %, 50-60 Hz Maximum power consumption: 190 W Typical power consumption: 80-100 W Fixture plate: 305 mm × 305 mm aluminium Maximum workpiece weight: 25 kg Notes * The process of measuring on an Equator involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on Equator, ‘mastering’, to establish a correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the masterpart. This specification applies where each part is fixtured to within 1 mm relative to the master part. Peak consumption at power up. 3-axis system typical consumption based on taking touch points under DCC control. Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), mileage: 142,344 km, power: 150 kW (203.94 HP), fuel type: electric, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,430 mm, first registration: 06/2022, loading space length: 770 mm, loading space width: 1,420 mm, loading space height: 1,280 mm, color: black, driver cabin: day cab, tire size: 245/55R17, number of seats: 7, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, cruise control, navigation system, parking heater, seat heater, traction control, = Additional Options and Accessories = - Bluetooth - Electric windows - Electric mirrors - Tinted windows - None - LED lamp - Alloy wheels - Manual - Radio/cassette - Rear view camera - Lane keeping assist - Blind spot sensor = Notes = Configuration: 4x2, Tare weight: 2660 kg, Gross vehicle weight: 3500 kg, Alloy wheels, Cruise control, Air conditioning, Number of airbags: 4, Auxiliary heating, Rear window wiper, Parking assistance: Front and rear, Tinted windows, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: Black, Metallic, Rear view camera, Lighting type: LED lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Blind spot sensor, Engine power: 150 kW (201 hp), Fuel: Electric, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: additionally extended, Side paneling, Roof rack: None, Side doors: 2, Side windows: 4, Rear closure: Tailgate, Central locking, Number of seats: 7, Seat cover: Leather, Seat adjustment: Manual, L3 XL 7-seater, 2x electric sliding doors, 344 km WLTP, Air conditioning, Camera, Cruise control, AC/DC 90 kWh, Tire type: All-season tires = Further Information = General information Number of doors: 2 License plate: KLEYN1 Axle configuration Tire size: 245/55R17 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 3 mm Axle 2: Tire tread depth left: 6 mm; Tire tread depth right: 6 mm Dimensions Dimensions (L x W x H): 537 x 193 x 188 cm Weights Tare weight: 2,660 kg Payload: 840 kg GVW: 3,500 kg Functional Loading area height: 50 cm Crjdpfx Ajy Iwdioa Hoc Interior Upholstery: Leather Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: 544 € per month (delivery van, 72 months); Ask for further information and conditions

Condition: used, Year of construction: 2010, Turntable load 2.000 mm Max. pallet length 1.200 mm Max. pallet width 1.000 mm Max. pallet height 2.250 mm Max. film diameter 300 mm Max. film width 500 mm Maximum turntable speed 14 U/min dimensions 2,85 x 1,52 x 1,50 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Cjdpfx Aaszbvhro Hsrc Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2002, travel -x axis 3.000 mm travel -y axis 560 mm Csdpfsy A Tb Hex Aa Horc travel -z axis 720 mm control Siemens - 840D number of spindle speeds 18.000 U/min numbers of positions in the tool changer 100 tool taper HSK 63 Milling machining centers - vertical | DMG - DMF 300 Linear The machine has exclusively processed aluminum and is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMF300Linear | DMF300 | DMF-300 Linear | DMF-300Linear

Condition: used, Year of construction: 2002, travel -x axis 3.000 mm travel -y axis 560 mm travel -z axis 720 mm control Siemens - 840D number of spindle speeds 18.000 U/min numbers of positions in the tool changer 100 tool taper HSK 63 Milling machining centers - vertical | DMG - DMF 300 Linear Crodpfxsy A Tbto Aa Hsc The machine has exclusively processed aluminum and is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMF300Linear | DMF300 | DMF-300 Linear | DMF-300Linear

Condition: used, mileage: 354,172 km, power: 221 kW (300.48 HP), first registration: 08/2009, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, brakes: intarder, color: green, gearing type: automatic, emission class: euro5, suspension: air, loading space length: 7,440 mm, loading space width: 2,540 mm, loading space height: 2,190 mm, Year of construction: 2009, Equipment: air conditioning, electric window regulation, tail-lift, Technical information Number of cylinders: 6 Engine capacity: 7.146 cc Drivetrain Drive: Wheel Make of engine: Volvo Transmission Transmission: I-SHIFT, Automatic Axle configuration Credpfx Aevt Df Sea Hec Tyre size: 315/80R22,5 Suspension: air suspension Rear axle 1: Double wheels Weights Empty weight: 10.815 kg Carrying capacity: 15.185 kg GVW: 26.000 kg Functional Tail lift: tail lift Make of bodywork: SKAB

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, power: 8.2 kW (11.15 HP), suction capacity: 6,000 m³/h, intake manifold diameter: 300 mm, For sale: Felder RL 300 industrial dust extraction system in very good condition. The machine was delivered new in 2022 and has always been located in a well-maintained interior design workshop. The system functions perfectly and can be used immediately in a furniture workshop, carpentry shop, or interior design workshop. Specifications: Brand: Felder Type: RL 300 Year of manufacture: 2022 Condition: fully functional Design: industrial dust extraction system with filter system Mobile on wheels The machine is sold without extraction ducts and pipes. Only the base unit as shown in the photo. Suitable for connecting to multiple woodworking machines such as: Crodpfxszap Eze Aa Hoc CNC machine panel saw edge banding machine planers milling machines The machine can be viewed in Rijnsburg – by appointment only. Transport is the responsibility of and arranged by the buyer. Available from mid-July. Asking price: €10,250 excluding VAT